Synthesis of associating poly(acrylic acid) in supercritical carbon dioxide and its solution properties

Hydrophobically associating polymers have been synthesized in supercritical carbon dioxide by copolymerization of acrylic acid with different amounts of acrylate with hydrocarbon or fluorocarbon groups. It was found that conversion of hydrocarbon comonomers was above 95% whereas that for fluorocarbon comonomers was only about 50%. In addition, large amounts of hydrophobic groups could be easily introduced to poly(acrylic acid) by reaction in supercritical carbon dioxide. The solution properties were investigated by rheology. The results indicated that intermolecular association of the copolymer was strong and viscosity was maximum under acidic conditions. In aqueous solutions fluorocarbon hydrophobes associated much more strongly than the hydrocarbon variety, but the viscosifying effect of PAAC-18 series copolymers in 2% (w/w) solution was more pronounced than that of the PAAF series, results which did not agree with the conclusions of Ravey and Stébé. It was also found that the thixotropy behavior of copolymer solution at pH 3.2 was more complex than that at pH 5.0, at which pseudoplasticity only was observed for solutions of all copolymers. Contact angles of copolymer solutions on a glass sheet were measured. The data indicated that contact angles of hydrocarbon-modified polymers were smaller than those of fluorocarbon analogues. As time passed the contact angle became smaller and smaller. Fluorocarbon analogues were better than hydrocarbon analogues, and longer hydrophobic chains were better than shorter chains, at maintaining the hydrophobic character of the surface.     

Electrically controlled separation of maleic acid and fumaric acid through a poly(vinyl alcohol)/poly(acrylic acid) composite membrane

The separation of maleic acid (MA) from a mixture of MA and fumaric acid (FA) was studied using an electrically activated polyelectrolyte gel membrane. The membrane was prepared through the iterative freezing-thawing of an aqueous solution containing poly(vinyl alcohol) and poly(acrylic acid). The separation of MA from an equimolar mixture (5 mM) of MA and FA using the membrane was performed under different conditions of pH (1–8) and electric fields (2–6 V). It was found that MA was separated from the mixture at pH 2 under an applied electric field of greater than 2 V because only the COOH groups of MA were dissociated at pH 2 and the MA⁻ ions were transported through the membrane toward the electrode opposite in sign to their charge.     

PH effects in the complex formation and blending of poly(acrylic acid) with poly(ethylene oxide)

The effect of pH on the complex formation between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) has been studied in aqueous solutions by turbidimetric and fluorescent methods. It was shown that the formation of insoluble interpolymer complexes is observed below a certain critical pH of complexation (pH(crit1)). The formation of hydrophilic interpolymer associates is possible above pH(crit1) and below a certain pH(crit2). The effects of polymer concentrations in solution and PEO molecular weight as well as inorganic salt addition on these critical pH values were studied. The polymeric films based on blends of PAA and PEO were prepared by casting from aqueous solutions with different pHs. These films were characterized by light transmittance measurements and differential scanning calorimetry. The existence of the pH value above which the polymers form an immiscible blend was demonstrated. The transitions between the interpolymer complex, miscible blend, and immiscible blend caused by pH changes are discussed. The recommendations for preparation of homogeneous miscible films based on compositions of poly(carboxylic acids) and various nonionic water-soluble polymers are presented.     

New composite membranes based on crosslinked poly(acrylic acid) and porous polyethylene films

A process for the preparation of new composite membranes via free-radical copolymerization of acrylic acid with a macromolecular crosslinker (allyloxyethylcellulose) on the surface of porous polyethylene films was proposed. To reveal the effect of the porous matrix on the properties of the composites, homogeneous hydrogel membranes based on crosslinked poly(acrylic acid) were studied. The swelling ratio and transport characteristics of the membranes during separation of ethanol-water mixture by pervaporation were determined depending on the ethanol concentration. It was found that all membranes at low ethanol concentrations (0–30 vol %) exhibited high swelling ratios, which drastically decreased in the range 30–40 vol % as a result of gel collapse. The composite membranes had a higher selectivity for water over a broad range of ethanol concentrations than homogeneous membranes, but a lower flux. It was found that the strength and elasticity of porous matrices was retained in the composite membranes, which became mechanically more isotropic owing to the presence of the crosslinked component.     

Transport of poly-L-lysine into oppositely charged poly(acrylic acid) microgels and its effect on gel deswelling

The interaction between poly-L-lysine (pLys) and oppositely charged poly(acrylic acid) (pAA) microgels (? approximately 80-120 microm) was studied by micromanipulator-assisted light microscopy and confocal laser scanning microscopy. The aim of this study was to investigate effects of peptide size, pH, and salt concentration on binding, transport, and distribution of pLys in pAA microgel particles and thereby also to outline the details of the gel deswelling in response to pLys binding and incorporation. Both peptide distribution and gel deswelling kinetics were found to be strongly influenced by the pLys molecular weight, originating partly from limited entry of large peptides into the gel particle core. Also pH was shown to influence both deswelling and pLys incorporation kinetics, with a decreased deswelling rate observed with increasing pH. These effects are determined by a complex interplay between the pH-dependence of both pLys and the gel network, also influencing volume transitions of the latter. Finally, salt concentration was shown to have a significant effect on both gel deswelling rate and pLys transport, with an increased electrolyte concentration resulting in decreased deswelling rate but also in an increased peptide transport rate within the microgel particles.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Structure and sorption properties of the polyion complex between poly(acrylic acid) and poly(4-vinylpyridine)

A polyion complex was formed from poly(acrylic acid) (PAA) and poly(4-vinylpyridine) (PVP). Its structure and composition were examined by means of infrared spectroscopy (IR), x-ray photoelectron spectroscopy (XPS), and elemental analysis. The polyion complex was obtained by dissolving PAA and PVP together in methanol. The composition of the polyion complex was independent of stirring speed, mixing sequence, and standing time after mixing. However, the composition depended on the concentrations and the ratio of the components in the reaction mixture. Excess of PAA in the product was observed when concentrated solutions (2.0 × 10^?1M) were used for the preparation or when an excess of PAA was added to PVP. The sorption of water vapor by an equimolar PAA/PVP complex at 293 and 303 K was higher than that by the pure components, especially in the low- and middle-pressure regions. In the high-pressure region, however, the uptake was not affected by the complex formation. While hydrogen bond interactions in general decrease sorption, Coulombic interactions between polymer chains increased the sorption capacity.     

Preparation and properties of poly(acrylic acid) oligomer stabilized superparamagnetic ferrofluid

Ferrofluids, which are stable dispersions of magnetic particles, behave as liquids that have strong magnetic properties. Nanoparticles of magnetite with a mean diameter of 10-15 nm, which are in the range of superparamagnetism, are usually prepared by the traditional method of co-precipitation from ferrous and ferric electrolyte solution. When diluted, the ferrofluid dispersions are not stable if anionic or cationic surfactants are used as the stabilizer. This work presents an efficient way to prepare a stable aqueous nanomagnetite dispersion. A stable ferrofluid containing Fe3O4 nanoparticles was synthesized via co-precipitation in the presence of poly(acrylic acid) oligomer. The mechanism, microstructure, and properties of the ferrofluid were investigated. The results indicate that the PAA oligomers promoted the nucleation and inhibited the growth of the magnetic iron oxide, and the average diameter of each individual Fe3O4 particle was smaller than 10 nm. In addition, the PAA oligomers provided both electrostatic and steric repulsion against particle aggregation, and the stability of dispersions could be controlled by adjusting the pH value of solution. A small amount of Fe2O3 was found in the nanoparticles but the superparamagnetic behavior of the nanoparticles was not affected.     

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA-poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl₂ to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.     

Complexation between poly(acrylic acid) and poly(vinylpyrrolidone): Influence of the molecular weight of poly(acrylic acid) and small molecule salt on the complexation

Poly(acrylic acid) (PAA) with different molecular weight and poly(vinylpyrrolidone) (PVP) were prepared by free radical polymerization using 2,2′-azoisobutyronitrile (AIBN) as initiator in anhydrous methanol for PAA, and in distilled water for PVP. Then, the complexation between PAA and PVP in aqueous solution was studied by UV transmittance measurement and fluorescence probe technique. The result shows that (1) at low pH, the formation of complexation between PAA and PVP bases on the intermacromolecular hydrogen bond and the composition of the formed complex is around 3:2 (the unit molar ratio of PAA to PVP) at pH 2.60 over the range of pH investigated. (2) The cooperative interaction through the formation of hydrogen bond among active sites plays an important role in complex formation, and depends on the pH of solution, the required minimum chain length of poly(acrylic acid). (3) The hydrogen bond is not affected by small molecular salt, which only affects those carboxylic groups without forming hydrogen bond on the PAA chain.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Water-soluble hydrogen-bonding interpolymer complex formation between poly(ethylene glycol) and poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid)

Comb-type copolymers of poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPSA) side chains form with poly(ethylene glycol), at low pH, water-soluble hydrogen-bonding interpolymer complexes. Turbidimetry, viscometry, and dynamic light scattering measurements suggest that compact, negatively charged, colloidal nanoparticles are formed at pH<3.75. The influence of the structure of the graft copolymers and of the ionic strength of the solution on the size of these nanoparticles was investigated. It was found that their hydrodynamic radius decreases by increasing the molecular mass of the PAMPSA side chains of the graft copolymer and increases with increasing the ionic strength of the solution.     

Kinetics of swelling of polyether-modified poly(acrylic acid) microgels with permanent and degradable cross-links

Spherical particles of 50-100 mum size composed of poly(acrylic acid) networks covalently bonded to Pluronic polyether copolymers were tested for swelling in aqueous media. The microgels were cross-linked either by permanent ethylene glycol dimethacrylate (EGDMA) cross-links alone or by EDGMA together with reversible disulfide or biodegradable azoaromatic cross-links. Optimum conditions for a rapid, diffusion-limited swelling of the pH- and temperature-sensitive microgels with nondegradable cross-links were found. The microgels cross-linked by disulfide groups and equilibrium-swollen in the buffer solution exhibited degradation-limited kinetics of swelling under physiological conditions, with a first-order reaction constant, k(1), linearly proportional to the concentration of reducing agents such as dithiotreitol and tris(2-carboxyethyl)phosphine (TCEP). A severalfold faster swelling in the presence of more powerful reducing agent, TCEP, was observed, indicating the chemical specificity of the microgel swelling. The reoxidation of the thiol groups into disulfide cross-links by sodium hypochlorite led to the restoration of the microgels' diameter measured prior to the reduction-reoxidation cycle, which confirms the shape memory of the microgels. Enzymatically degradable azoaromatic cross-links enabled slow microgel swelling due to degradation of the cross-links by azoreductases from the rat intestinal cecum. The low rate of swelling of the Pluronic-containing microgels can enable sustained drug release in colon-specific drug delivery.     

Synthesis,characterization and water absorbency properties of poly(acrylic acid)/sodium humate superabsorbent composite

A novel poly(acrylic acid)/sodium humate superabsorbent composite was synthesized by aqueous solution polymerization of acrylic acid using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator in the presence of sodium humate. The effects on water absorbency such as initial monomer concentration, degree of neutralization of acrylic acid, amount of crosslinker, initiator and sodium humate, etc. were investigated. The water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with a sodium humate content of 20% exhibited an absorption of 1268 g H₂O/g sample and 93 g H₂O/g sample in distilled water and in 0.9 wt% NaCl solution, respectively. Swelling rate and water retention tests were also carried out. The results show that sodium humate, as a kind of functional filler, can enhance comprehensive properties of superabsorbent composite and reduce the product cost significantly. Copyright © 2005 John Wiley & Sons, Ltd.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Melt processing of maleic anhydride grafted poly(lactic acid) and its compatibilizing effect on poly(lactic acid)/poly(butylene adipate-<Emphasis Type="Italic">co</Emphasis>-terephthalate) blend and their composite

Poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blends were prepared using melt processing. The effects of maleic anhydride grafted PLA (PLA-g-MA) and calcium carbonate (CaCO₃) content on mechanical, thermal, and morphological properties of the blends were investigated. PLA-g-MA was synthesized by varying monomer and initiator contents using a reactive melt-grafting process. Tensile properties of PLA/PBAT blend were enhanced with adding 2 phr of PLA-g-MA. SEM micrographs exhibited the improvement of interfacial adhesion between PLA and PBAT in the compatibilized blend. Moreover, thermal stability of the blends improved with presence of PLA-g-MA. With increasing CaCO₃ content, Young’s modulus of the composites increased.     

Kinetics and equilibrium of the complexation of Al3+ with poly(maleic, acrylic) acid

Kinetics and equilibrium of the complexation of Al³⁺ with a polycarboxylic acid (PCA, random copolymer of maleic and acrylic acid with a mean molecular weight of 92 kDa) are investigated by the stopped flow technique and potentiometric titration. The complexation proceeds according to the Eigen–Tamm mechanism, i.e. in first diffusion-controlled step an outer sphere complex is formed. The second rate determining step is the formation of the inner sphere complex, controlled by the exchange rate of hydration water. For this second step the rate constant is k ₁=3 s^-1. It is in the order of magnitude of the water exchange at the Al³⁺ ion as expected for the Eigen–Tamm mechanism. The activation parameters are also determined. Parallel to this direct reaction path a base catalyzed path is found, typical for complexation reactions of hydrolyzable metal ions. Stable complexes are formed for which the overall association constant K _ass=Q _o(1+K _i) is determined by two parts: a chemical (intrinsic) part, described by the inner sphere association constant K _i=3 and an electrostatically controlled part described by the outer-sphere association quotient Q _o. The evaluation of the kinetic experiments allows to determine the value of log(Q _o) as a function of pH: 3.3<log Q _o<4.6. From these data the potential is calculated in the range −67 to ∝93 mV at pH values between 2 and 4. For comparison, analogous experiments with the monomeric subunits of the polyacid, glutarate (GA), and tricarballylate (TCA), are performed. The complexation with the monomeric subunits glutaric- and tricarballylic acid can be explained within the classical view of a discrete outer sphere association constant Q _o. Received: 13 November 1997 Accepted: 24 March 1998     

Controlled synthesis of oligomeric poly(acrylic acid) and its behavior in aqueous solutions

The controlled synthesis of oligomeric poly(acrylic acid) via the pseudoliving radical reversible addition-fragmentation chain-transfer polymerization of acrylic acid in bulk is developed. It is shown that, at high concentrations of reversible addition-fragmentation chain-transfer agents, the polymerization of acrylic acid in bulk occurs via the pseudoliving mechanism, as evidenced by a linear increase in the numberaverage molecular mass of oligomers with conversion and a narrow molecular-mass distribution of the reaction products. The surfactant properties and behavior of the oligomers in aqueous solutions are studied.