Chiral recognition and conglomerate crystallization induced by self-organization of cobalt(III) complexes of a tripodal ligand containing three imidazole groups

The effect of a counteranion on chiral recognition inducing conglomerate crystallization of a cobalt(III) complex is reported. An achiral tripodal ligand involving three imidazole groups, tris{[2-{(imidazol-4-yl)methylidene}amino]ethyl}amine (H3L), was prepared by condensation of tris(2-aminoethyl)amine and 4-formylimidazole in a 1:3 mole ratio. The reaction of H3L and trans-[CoIIICl2(py)4]+ afforded the chiral (Delta or Lambda) [CoIII(H3L)]3+ complex. The formally hemideprotonated complexes [CoIII(H(1.5)L)]X(1.5).nH2O (where X = Cl, Br, I, BF4, ClO4, or PF6) were synthesized by controlled deprotonation of the uncoordinated imidazole NH groups of [Co(H3L)]3+. In crystals of the hemideprotonated complex, two components, [Co(H3L)]3+ and [Co(L)], with the same absolute configuration are linked by imidazole-imidazolate hydrogen bonds to form an extended homochiral 2D sheet structure, which is composed of a hexanuclear unit with a trigonal void. There are two ways of stacking the sheets: One is via homochiral stacking, and the other is via heterochiral stacking. When the size of the counterion is small (i.e., X = Cl, Br, I, or BF4), adjacent homochiral sheets with the same chirality are stacked to form a homochiral crystal (conglomerate). With large anions (i.e., ClO4- and PF6-), a homochiral sheet consisting of Delta enantiomers and a sheet consisting of Lambda enantiomers are stacked alternately to give a heterochiral crystal (a racemic crystal). Optically active Lambda-[Co(H(1.5)L)](ClO4)(1.5).H2O was synthesized from Lambda-[Co(H3L)]3+, and the crystal structure was compared to that of the racemic complex. There are two conflicting factors governing the crystal structure: the skeletal density; the size of the channels. The 2D sheets are more closely packed in the homochiral crystal than in the heterochiral crystal. However, the channels, where the counterions are accommodated, are smaller in the homochiral crystal, and the steric congestion between the anions increases with increasing anion size. The heterochiral crystal has a flexible, zigzag channel structure, and the size of the channels can increase to accommodate larger anions. Thus, complexes with large anions (i.e., ClO4- and PF6-) preferentially form heterochiral crystals rather than homochiral crystals.     

A double arene hydroxylation mediated by dicopper(II)-hydroperoxide species

The dicopper(II) complex [Cu(2)(L)](4+) (L = alpha,alpha'-bis[bis[2-(1'-methyl-2'-benzimidazolyl)ethyl]amino]-m-xylene) reacts with hydrogen peroxide to give the dicopper(II)-hydroquinone complex in which the xylyl ring of the ligand has undergone a double hydroxylation reaction at ring positions 2 and 5. The dihydroxylated ligand 2,6-bis([bis[2-(3-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)benzene-1,4-diol was isolated by decomposition of the product complex. The incorporation of two oxygen atoms from H(2)O(2) into the ligand was confirmed by isotope labeling studies using H(2)(18)O(2). The pathway of the unusual double hydroxylation was investigated by preparing the two isomeric phenolic derivatives of L, namely 3,5-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (6) and 2,6-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (7), carrying the hydroxyl group in one of the two positions where L is hydroxylated. The dicopper(II) complexes prepared with the new ligands 6 and 7 and containing bridging micro-phenoxo moieties are inactive in the hydroxylation. Though, the dicopper(II) complex 3 derived from 6 and containing a protonated phenol is rapidly hydroxylated by H(2)O(2) and represents the first product formed in the hydroxylation of [Cu(2)(L)](4+). Kinetic studies performed on the reactions of [Cu(2)(L)](4+) and 3 with H(2)O(2) show that the second hydroxylation is faster than the first one at room temperature (0.13 +/- 0.05 s(-1) vs 5.0(+/-0.1) x 10(-3) s(-1)) and both are intramolecular processes. However, the two reactions exhibit different activation parameters (Delta H++ = 39.1 +/- 0.9 kJ mol(-1) and Delta S++ = -115.7 +/- 2.4 J K(-1) mol(-1) for the first hydroxylation; Delta H++ = 77.8 +/- 1.6 kJ mol(-1) and Delta S++ = -14.0 +/- 0.4 J K(-1) mol(-1) for the second hydroxylation). By studying the reaction between [Cu(2)(L)](4+) and H(2)O(2) at low temperature, we were able to characterize the intermediate eta(1):eta(1)-hydroperoxodicopper(II) adduct active in the first hydroxylation step, [Cu(2)(L)(OOH)](3+) [lambda(max) = 342 (epsilon 12,000), 444 (epsilon 1200), and 610 nm (epsilon 800 M(-1)cm(-1)); broad EPR signal in frozen solution indicative of magnetically coupled Cu(II) centers].     

Crystallization-induced asymmetric transformation of chiral-at-metal ruthenium(II) complexes bearing achiral ligands

Recently, we observed that the enantiopure Lambda form of the tributylammonium salt of the chiral anion tris[tetrachlorobenzene-1,2-bis(olato)]phosphate, also named Trisphat, was able to induce an efficient resolution of a Delta,Lambda racemic mixture of cis-[Ru(dmp)2(NCCH3)2](PF6)2 (dmp=2,9-dimethyl-1,10-phenanthroline) due to the spontaneous and selective precipitation of the heterochiral pair [Delta-Ru(dmp)2(CH3CN)2][Lambda-Trisphat]2. We report here that the combination of such a stereoselective precipitation process and irradiation results in the quantitative conversion of the initial [Ru(dmp)2(NCCH3)2]2+ racemate into only one of the two enantiomers. This is the first example in inorganic chemistry of an asymmetric transformation that leads to a chiral complex with no chiral ligand. Finally, three new racemic ruthenium bis(diimine) complexes, namely [Ru(dmp)2(NCCH3)Py](PF6)2 (Py=pyridine), [Ru(dmp)2(1,3-diaminopropane)](PF6)2, and [Ru(dmp)2(ethylenediamine)](PF6)2 were synthesized. For all of them, crystallization-induced asymmetric transformation proved to be an efficient way of obtaining the corresponding optically active chiral-at-metal complexes in high yields and with excellent stereoselectivities.     

Asymmetric transformation of a double-stranded, dicopper(I) helicate containing achiral bis(bidentate) Schiff bases

Reactions of the bis(bidentate) Schiff-bases N,N'-bis(6-alkyl-2-pyridylmethylene)ethane-1,2-diamine (where alkyl = H, Me, iPr) (L) with tetrakis(acetonitrile)copper(I) hexafluorophosphate and silver(I) hexafluorophosphate afforded, respectively, the double-stranded, dinuclear metal helicates [T-4-(R,R)]-(+/-)-[M2L2](PF6)2 (M = Cu, Ag). The helicates were characterized by 1H and 13C NMR spectroscopy, conductivity, microanalysis, and single-crystal X-ray structure determinations on selected compounds. Intermolecular ligand exchange and intramolecular inversion rates for the complexes were investigated by 1H NMR spectroscopy. Reversible intermolecular ligand exchange between two differently substituted helicates followed first-order kinetics. The rate constants (k) and corresponding half-lives (t(1/2)) for ligand exchange for the dicopper(I) helicates were k = (1.6-1.8) x 10(-6) s(-1) (t(1/2) = 110-120 h) in acetone-d6, k = 4.9 x 10(-6) s(-1) (t(1/2) = 40 h) in dichloromethane-d2, and k > 2 x 10(-3) s(-1) (t(1/2) < 5 min) in acetonitrile-d3. Ligand exchange for the disilver(I) helicates occurred with k > 2 x 10(-3) s(-1) (t(1/2) < 5 min). Racemization of the dicopper(I) helicate by an intramolecular mechanism was investigated by determination of the coalescence temperature for the diastereotopic isopropyl-Me groups in the appropriate complex, and DeltaG() > 76 kJ mol(-1) was calculated for the process in acetone-d6, nitromethane-d3, and dichloromethane-d2 with DeltaG() = 75 kJ mol(-1) in acetonitrile-d3. Complete anion exchange of the hexafluorophosphate salt of a dicopper(I) helicate with the enantiomerically pure Delta-(-)-tris(catecholato)arsenate(V) ([As(cat)3]-) in the presence of Dabco gave the two diastereomers (R,R)-[Cu2L2][Delta-(-)-[As(cat)3]]2 and (S,S)-[Cu2L2][Delta-(-)-[As(cat)3]]2 in up to 54% diastereomeric excess, as determined by (1)H NMR spectroscopy. The diastereomerically and enantiomerically pure salt (R,R)-[Cu(2)L2][Delta-(-)-[As(cat)3]]2 crystallized from the solution in a typical second-order asymmetric transformation. The asymmetric transformation of the dicopper(I) helicate is the first synthesis of a diastereomerically and enantiomerically pure dicopper(I) helicate containing achiral ligands.     

Fused pyridazines: rigid multidentates for designing and fine-tuning the structure of hybrid organic/inorganic frameworks

Fused pyridazines (1,2,3,6,7,8-hexahydro-cinnolino[5,4,3-cde]cinnoline, L and its 2,2,7,7-tetramethyl derivative, Me4L) are designed as rigid multidentate ligands for the construction of framework solids. In combination with copper(I) bromide (iodide) they provide excellent structural examples for predictive engineering and the possibilities for further fine-tuning of the framework architectures facilitated by the tetradentate function of the ligands and effective cooperation of organic and inorganic bridges. This study features control over helical structures for (CuX)n chains and homo/heterochiral combination of the helices in the lattice, the design of a range of channelled and tubular CuX networks and the structural significance of ligand shape complementarity. 3D tetragonal Cu2X2(L) frameworks exist either as chiral or achiral supramolecular isomers Cu2I2(Me4L) and Cu12I12[Cu(CH3CN)]3(L)(6-)Cu3I6.CH3CN illustrate 3D hexagonal channelled and tubular arrays; Cu2I2(Me4L)(CH3CN) and Cu4I4(L)(CH3CN)2 complexes are 1D polymers.     

Linear and cyclic tetranuclear copper(I) complexes containing anions of N,N'-bis(pyrimidine-2-yl)formamidine

The reaction of Kpmf (pmf = anion of N,N[prime or minute]-bis(pyrimidyl-2-yl)formamidine, Hpmf) with CuSCN afforded the complexes K[Cu4(pmF)3(SCN)2], 1, and Cu(4)(pmf)4, 2. Reaction of 1 with [(n-Bu)4N]PF6 in THF gave the complex [(n-Bu)4N][Cu4(pmf)3(SCN)2], 3. Their structures were characterized by X-ray crystallography. Complexes 1 and 3 are the first linear tetranuclear complexes containing only Cu(I) atoms, while complex 2 is cyclic. The four Cu(I) atoms of complexes 1 and 3 are helically bridged by three tetradentate pmf- ligands. The [Cu4(pmf)3(SCN)2]- anions of 1 show weak interactions with adjacent [K(THF)5]+ cations through the sulfur atoms, forming infinite chains which are subjected to a series of intermolecular pi-pi interactions. In complex 2, the pmf- ligands are coordinated to the copper atoms in bidentate fashion through the two central amine nitrogen atoms, leaving the pyrimidine nitrogen atoms uncoordinated. Unexpected fluxional behaviors were observed for complexes 1 and 3 in solution. By the DNMR analysis, the free energy of activation (DeltaGc(not equal)) for the exchange is 12.8 kcal mol(-1) at 278 K (T(c)), and the rate constant of exchange (K(c)) is 470 s(-1) for 1. The DeltaGc(not equal) and Kc are 12.6 kcal mol(-1) at 273 K and 433 s(-1), respectively, for 3.     

Synthesis and reactivity of copper(I) complexes with an ethylene-bridged bis(imidazolin-2-imine) ligand

A series of copper(I) complexes with a sterically hindered, bidentate ligand, BL iPr, derived from an N-heterocyclic carbene precursor have been isolated, characterized and their reactivity studied. The ethylene-bridged bis(imidazolin-2-imine) ligand (BL iPr) provides strongly donating N-donor atoms for the stabilization of a copper(I) metal center, priming it for reactivity. The complexes [(BL iPr)Cu(XyNC)]PF6 (4) and [(BL iPr)CuCl] (5) were characterized by X-ray crystallography and exhibit trigonal coordination at the copper centers. The reactivity of [(BL iPr)Cu]SbF6 toward dioxygen was studied at low temperature, indicating formation of a thermally sensitive intermediate with intense UV/Vis features and an isotope-sensitive vibration at 625 cm(-1) (599 cm(-1) with 18 O2). The intermediate is assigned as containing the bis(mu-oxo)dicopper(III) core, [2](PF6)2, and the related, stable hydroxo form was crystallized as [{(BL iPr)Cu}2(mu-OH)2](PF6)2, [3](PF6)2. The reactivity of 5 as a catalyst for the ATR polymerization of styrene was assessed in terms of reaction kinetics and polymer properties, with low PDI values achieved for polymers with molecular weights up to 30 000 g mol(-1).     

Synthesis and reactivity of copper(I) complexes containing a bis(imidazolin-2-imine) pincer ligand

The new pincer ligand 2,6-bis[(1,3-di-tert-butylimidazolin-2-imino)methyl]pyridine (TL(tBu)) has been prepared in high yield from 2,6-bis(hydroxymethyl)pyridine (1) and 1,3-di-tert-butylimidazolin-2-imine (3). Reaction of TL(tBu) with [Cu(MeCN)4]PF6 affords the highly reactive copper(I) complex [(TL(tBu))Cu]PF6, [5]PF6, which forms the stable copper(I) isocyanide complexes [6a]PF6 (nu(CN) = 2179 cm(-1)) and [6b]PF6 (nu(CN) = 2140 cm(-1)) upon addition of tert-butyl or 2,6-dimethylphenyl isocyanide, respectively. For the cations 6a and 6b, DFT calculations reveal ground-state electronic structures of the type [(TL(tBu)-kappaN(1):kappaN(2))Cu(CNR)] with tricoordinate geometries around the copper atoms. Exposure of [5]PF6 to the air readily leads to trapping of atmospheric CO2 to form the square-planar complex [(TL(tBu))Cu(HCO3-kappaO)]PF6, [7]PF6, with the bicarbonate ligand adopting a rarely observed monodentate coordination mode. In chlorinated solvents such as dichloromethane or chloroform, [5]PF(6) rapidly abstracts chloride by reductive dechlorination of the solvent to yield [(TL(tBu))CuCl]PF6, [8]PF6 quantitatively. Reaction of TL(tBu) with copper(I) bromide or chloride affords complexes 9a and 9b, respectively, for which X-ray diffraction analysis, low-temperature NMR experiments and DFT calculations reveal the presence of a kappa(2)-coordinated ligand of the type [(TL(tBu)-kappaN(1):kappaN(2))CuX]. In solution, complex 9b undergoes slow disproportionation forming the mixed-valence copper(II)/copper(I) system [(TL(tBu))CuCl][CuCl2], [8]CuCl2 with a linear dichlorocuprate(I) counterion.     

Pyridazine-bridged copper(I) complexes of bis-bidentate ligands: tetranuclear [2 x 2] grid versus dinuclear side-by-side architectures as a function of ligand substituents

Eight bis-bidentate Schiff-base ligands, derived from 3,6-diformylpyridazine and substituted amino-benzenes, have been prepared. A variety of electron donating/withdrawing and/or sterically demanding/undemanding substituents were employed. Two ligands and five of the six pure copper(I) complexes have been structurally characterised. The sterically unhindered ligand derived from 3,5-difluoroaniline, (m,m-F), was almost completely flat whereas the very sterically hindered ligand derived from trimethylaniline, (o,o,p-Me), was severely twisted. The only dinuclear side-by-side complex obtained, [Cu(I)(2)((o-Ph))(2)](PF(6))(2), was of the ligand derived from 2-aminobiphenyl. All five of the other complexes are believed to be [2 x 2] tetranuclear grid complexes, and this was unequivocally shown to be the case for four of these complexes, [Cu(I)(4)((p-Me))(4)](PF(6))(4), [Cu(I)(4)((o,p-Me))(4)](PF(6))(4), [Cu(I)(4)((m,m-F))(4)](PF(6))(4) and [Cu(I)(4)((m,m-Cl))(4)](PF(6))(4). In all cases the copper(I) centres are substantially distorted from tetrahedral, with the most severe distortion present in the side-by-side complex. In the absence of any special effects, tetracopper(I) [2 x 2] grid architectures are observed to be the favored outcome for 1 : 1 reactions of these bis-bidentate ligands with copper(I) ions. Only when the aromaticity of the ligand was extended by employing a phenyl substituent on the phenyl rings, (o-Ph), did a dicopper(I) side-by-side architecture result. Cyclic voltammetry in acetone revealed that the free ligands did not undergo reduction until potentials below -0.8 V, whereas between three and four reversible one electron reductions were observed, between +0.16 and -0.71 vs. AgCl/Ag, for the tetranuclear copper(I) [2 x 2] grid complexes. The redox potentials observed for these complexes are highly dependent on the nature of the ligand phenyl ring substituent(s). The side-by-side complex had one irreversible reduction process, E(pc)ca.-0.5 V.     

Localization and delocalization in a mixed-valence dicopper helicate

The coordination chemistry of the tetradentate pyridyl-thiazole (py-tz) N-donor ligand 6,6'-bis(4-phenylthiazol-2-yl)-2,2'-bipyridine (L1) has been investigated. Reaction of L1 with equimolar copper(II) ions results in the formation of the single-stranded mononuclear complex [Cu(L1)(ClO4)2] (1), whereas reaction with copper(I) ions results in the double-stranded dinuclear helicate [Cu2(L1)2][PF6]2 (2). Both complexes were characterized by X-ray crystallography, UV-vis spectroscopy, and electrospray ionization mass spectroscopy (as well as 1H NMR spectroscopy for diamagnetic 2). Complex 2 is redox-active and, upon one-electron oxidation, forms the stable tricationic mixed-valence helicate [Cu2(L1)2]3+ (3). This species can also be prepared in situ by combining [Cu(MeCN)4][BF4], [Cu(H2O)6][BF4]2, and L1 in a 1:1:2 ratio in nitromethane. X-ray crystallographic analysis of 3 provides structural evidence for the presence of an internuclear Cu-Cu bond, with an even distribution of spin density across the two Cu centers. Room-temperature UV-vis spectroscopy is consistent with this finding; however, frozen-glass EPR spectroscopic investigations suggest solvatochromic behavior at 110 K, with the [Cu2]3+ core varying from localized to delocalized depending on the solvent polarity.     

Platinum(II) and palladium(II) complexes of bisphosphine ligands bearing o-N,N-dimethylanilinyl substituents: a hint of catalytic olefin hydration

Platinum(II) and palladium(II) complexes of the potentially hexadentate P,N-donor ligand family Ar2P-X-PAr2 (X = (CH2)2 [dmape], cyclic-C5H8 [dmapcp]; Ar = o-N,N-dimethylanilinyl) are described. In CH2Cl2, the dmape complexes exist as equilibrium mixtures of MCl2(P,P'-dmape) and [MCl(P,P',N-dmape)]Cl isomers (M = Pd, Pt), governed by deltaH(o) = -19 +/- 4 kJ mol(-1) and deltaS(o) = -100 +/- 30 J mol(-1) K(-1) for M = Pt, and deltaH(o) = -11 +/- 7 kJ mol(-1) and deltaS(o) = -60 +/- 20 J mol(-1) K(-1) for M = Pd. The water-soluble dmapcp complexes exist solely in the [MCl(P,P',N-dmapcp)]Cl form, but the free and coordinated anilinyl rings in these complexes are in slow diastereoselective exchange. X-ray crystal structures for MCl2(P,P'-dmape) (M = Pd, Pt), and the [PdCl(P,P',N-dmape)]+ and [PtCl(P,P',N-dmapcp)]+ cations, are presented. Some of the complexes show marginal activity in water for the catalyzed hydration of maleic to malic acid, giving about 6-7% conversion in 24 h at 100 degrees C and substrate:catalyst loadings of 100:1. Attempts to synthesize a PdCl(P,P',N-dmapm)+ species led instead to isolation of [Pd(mu-Cl)(P,P'-dmapm)]2[PF6]2 (dmapm = Ar2PCH2Ar2).     

Binuclear copper(I) macrocycles synthesized via the weak-link approach

The weak-link approach has been employed to synthesize a series of bimetallic Cu(I) macrocycles in high yield. Addition of phosphinoalkylether or -thioether ligands to [Cu(MeCN)4]PF6 produces "condensed" intermediates, [mu-(1,4-(PPh2CH2CH2X)2Y)2Cu2][PF6]2 (X = S, O; Y = C6H4, C6F4), containing strong P-Cu bonds and weaker O-Cu or S-Cu bonds. The weak bonds of these intermediates can be cleaved through ligand substitution reactions to generate macrocyclic structures, [mu-(1,4-(PPh2CH2CH2X)2Y)2(Z)nCu2][PF6]2 (X = S, O; Y = C6H4, C6F4; Z = pyridine, acetonitrile, diimines, isocyanide) in nearly quantitative yields. The incorporation of tetrahedral Cu(I) metal centers into these macrocycles provides a pathway to complexes that differ from analogous d8 square planar macrocycles generated via this approach in their increased air stability, small molecule reactivity, and ability to form multiple structural isomers. Solid-state structures, as determined by single-crystal X-ray diffraction studies, are presented for condensed intermediates and an open macrocycle     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.     

Hydrogen storage in the dehydrated prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn)

The porosity and hydrogen storage properties for the dehydrated Prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn) are reported. Argon sorption isotherms measured at 87 K afford BET surface areas ranging from 560 m2/g for Ni3[Co(CN)6]2 to 870 m2/g for Mn3[Co(CN)6]2; the latter value is comparable to the highest surface area reported for any known zeolite. All six compounds show significant hydrogen sorption at 77 K and 890 Torr, varying from 1.4 wt % and 0.018 kg H2/L for Zn3[Co(CN)6]2 to 1.8 wt % and 0.025 kg H2/L for Cu3[Co(CN)6]2. Fits to the sorption data employing the Langmuir-Freundlich equation give maximum uptake quantities, resulting in a predicted storage capacity of 2.1 wt % and 0.029 kg H2/L for Cu3[Co(CN)6]2 at saturation. Enthalpies of adsorption for the frameworks were calculated from hydrogen isotherms measured at 77 and 87 K and found to increase with M varying in the order Mn < Zn < Fe < Co < Cu < Ni. In all cases, the binding enthalpies, which lie in the range of 5.3-7.4 kJ/mol, are higher than the 4.7-5.2 kJ/mol measured for Zn4O(1,4-benzenedicarboxylate)3.     

3[(dx2-y2,dxy)(pz)] excited state of binuclear copper(I) phosphine complexes: effect of copper-ligand and copper-copper interactions on excited state properties and photocatalytic reductions of the 4,4'-dimethyl-2,2'-bipyridinium ion in alcohols

A comprehensive study of the structural and spectroscopic properties of two-, three-, and four-coordinate copper(I) complexes with aliphatic phosphine ligands is presented. All complexes described in this work are characterized by X-ray crystallography. The intramolecular Cu...Cu separations in [Cu2(dcpm)2]X2, [Cu2(dcpm)2-(CH3CN)2]X2, and [Cu2(dmpm)3]-(ClO4)2 (dcpm=bis(dicyclohexylphosphino)methane; dmpm=bis(dimethylphosphino)methane; X=ClO4- and PF6-) are in the range 2.639(2)-3.021(2) A. The anion...CuI interaction is weak, as evidenced by the nearest O...Cu separation of 2.558(6) A in [Cu2(dcpm)2](ClO4)2 and the closest Cu...F separation of 2.79(1) A in [Cu2(dcpm)2](PF6)2. The absorption bands of [Cu2(dcpm)2]X2 and [Cu2(dcpm)2(CH3CN)2]X2 (X=ClO4- and PF6-) at lambda max 307-311 nm in CH2Cl2 are assigned as 1[3d sigma* --> 4p sigma] transitions; this has been confirmed by resonance Raman spectroscopy. The triplet emissions in the visible region from these complexes exhibit long lifetimes and are sensitive to the environment. The lowest emissive excited state is tentatively ascribed as 3[(dx2-y2, dxy)(pz)] in nature. For [Cu2(dcpm)2]2+ salts in CH3CN, the emissive species is postulated to be [Cu2(dcpm)2(CH3CN)n]2+ (n > or = 3). Efficient photocatalytic reduction of MV2+ (4,4'-dimethyl-2,2'-bipyridinium) to MV+ in alcoholic solutions by using [Cu2(dcpm)2](PF6)2 or [Cu2(dppm)2(CH3CN)4](ClO4)2 (dppm=bis(diphenylphosphino)methane) as a catalyst has been observed. The addition of CH3CN or use of [Cu2(dmpm)3]-(ClO4)2 as a catalyst did not allow photocatalytic reduction processes to occur.     

d-orbital effects on stereochemical non-rigidity: twisted Ti(IV) intramolecular dynamics

The isomerization dynamics of tris-catecholate complexes have been investigated by variable-temperature NMR methods, demonstrating that the intramolecular racemization of Delta and Lambda enantiomers of d0 Ti(IV) is facile and faster than that of d10 Ga(III) and Ge(IV) analogues. Activation parameters for the racemization of K2[Ti2(3)] (H(2)2 = 2,3-dihydroxy-N,N'-diisopropylterephthalamide) were determined from line shape analysis of 1H NMR spectra [methanol-d4: deltaH++ = 47(1) kJ/mol; deltaS++ = -34(4) J/mol K; deltaG++(298) = 57(3) kJ/mol; DMF-d7: deltaH++ = 55(1) kJ/mol; deltaS++ = -16(4) J/mol K; deltaG++(298) = 59(3) kJ/mol; D2O (pD* = 8.6, 20% MeOD): deltaH++ = 48(3) kJ/mol; deltaS++ = -28(10) J/mol K; deltaG++(298) = 56(3) kJ/mol]. The study of K2[Ti4(3)] (H(2)4 = 2,3-dihydroxy-N-tert-butyl-N'-benzylterephthalamide) reveals two distinct isomerization processes: faster racemization of mer-[Ti4(3)]2- by way of a Bailar twist mechanism (D3h transition state) [T(c) approximately 242 K, methanol-d4], and a slower merright harpoon over left harpoonfac [Ti4(3)]2- isomerization by way of a Ray-Dutt mechanism (C2v transition state) [T(c) approximately 281 K, methanol-d4]. The solution behavior of the Ti(IV) complexes mirrors that reported previously for analogous Ga(III) complexes, while that of analogous Ge(IV) complexes was too inert to be detected by 1H NMR up to 400 K. These experimental findings are augmented by DFT calculations of the ML3 ground states and Bailar and Ray-Dutt transition states, which correctly predict the relative kinetic barriers of complexes of the three metal ions, in addition to faithfully reproducing the ground-state structures. Orbital calculations support the conclusion that participation of the Ti(IV) d orbitals in ligand bonding contributes to the greater stabilization of the prismatic Ti(IV) transition states.     

Heteropolynuclear palladium complexes with pyrazolate and its 3-tert-butyl derivatives: the effect of heterometal ions on the rate of isomerization

The heteropolynuclear complexes [Pd(2)M'(2)(mu-pz)(6)] (M'=Ag (1), Au (2); pzH=pyrazole), HT-[Pd(2)M'(2)(mu-3-tBupz)(6)] (M'=Ag (3 a), Au (4 a); 3-tBupzH=3-tert-butylpyrazole), and HH-[Pd(2)Au(2)(mu-3-tBupz)(6)] (4 b) have been prepared and some of them were structurally characterized. When 3-tert-butylpyrazolate was employed as a bridging ligand, two linkage isomers (head-to-tail (HT) and head-to-head (HH)) arise from the difference in orientation of the substituent groups on the pyrazolate bridges between the two Pd atoms. (1)H NMR spectroscopy has been used to identify and to follow the reversible stereochemical rearrangement of the HH isomer of [Pd(2)Ag(2)(mu-3-tBupz)(6)] (3 b) to form the HT isomer 3 a in CDCl(3) and the HT isomer of [Pd(2)Au(2)(mu-3-tBupz)(6)] (4 a) to form the HH isomer 4 b in C(6)D(6). Kinetic studies of the reaction have established the rate law to be -d(HH)/dt=d(HT)/dt=k(2)[HH]-k(1)[HT] for 3 b and -d(HT)/dt=d(HH)/dt=k(1)[HT]-k(2)[HH] for 4 a, where k(1) and k(2) denote the rate of isomerization from the HT to the HH isomer and that from the HH to the HT isomer, respectively. For typical runs at 50 degrees C in C(6)D(6), k(1)=13.8x10(-5) s(-1), k(2)=18.6x10(-5) s(-1), and K(eq)=k(2)/k(1)=1.24 for 3 b, and k(1)=1.26x10(-5) s(-1), k(2)=3.52x10(-5) s(-1), and K(eq)=k(1)/k(2)=0.36 for 4 a. Temperature-dependent rate measurements reveal DeltaH(not equal) and DeltaS(not equal) to be 100(1) kJ mol(-1) and 0(3) J mol(-1) K(-1) for 3 b and 112(5) kJ mol(-1) and 20(17) J mol(-1) K(-1) for 4 a, respectively. The rate of isomerization is essentially unaffected by the concentration of the complex or by the presence of neutral bridging ligands. These data and observations imply that the isomerization involves an intramolecular exchange process.     

Tuning charge recombination rate constants through inner-sphere coordination in a copper(I) donor-acceptor compound

The coordination compounds [Cu(bpy-MV2+)(PPh3)2](PF6)3, where bpy-MV2+ is the 1-(4-(4'-methyl-2,2'-bipyridin-4-yl)butyl)-1'-methyl-4, 4'-bipyridinediium(2+) cation, and [Cu(dmb)(PPh3)2](PF6), where dmb is 4,4'-dimethyl-2,2'-bipyridine, have been prepared and characterized. Visible light (417 nm) excitation of [Cu(bpy-MV2+)(PPh3)2]3+ at room temperature leads to rapid intramolecular electron transfer, kcs > 1 x 10(8) s-1, to form a charge-separated state with an electron localized on the pendant viologen group and a copper(II) metal center, abbreviated [CuII-bpy-MV.+]. This state recombines to ground-state products with first-order rate constants that can be tuned with solvent over a approximately 10(7)-10(5) s-1 range. The activation parameters were determined from temperature-dependent electron-transfer data with Arrhenius analysis. A model is proposed wherein a solvent molecule is coordinated to Cu(II) in the charge-separated state, [(S)CuII-bpy-MV.+]. Visible light excitation of [Cu(dmb)(PPh3)2](PF6) in argon-saturated dichloromethane produces long-lived photoluminescent excited states, tau = 80 ns, that are dynamically quenched by the addition of Lewis basic solvents. The measured quenching constants each correlate well with the lifetime of the charge-separated state measured after excitation of [Cu(bpy-MV2+)(PPh3)2]3+ in the corresponding solvent.     

Synthesis and characterisation of transition metal halide complexes of the xylyl-distibine, 1,2-bis(dimethylstibanylmethyl)benzene

Complexes of the title ligand with Cu(I), Ag(I), Au(I), Pd(II), Pt(II), Rh(III), and rare examples with Ni(II) and Co(III) have been prepared and characterised by analysis, IR, UV-vis, 1H, 63Cu and 59Co NMR spectroscopy and ES+ mass spectrometry as appropriate. The structures of [Cu[1,2-C6H4(CH2SbMe2)2]2]BF4, [PtCl2[1,2-C6H4(CH2SbMe2)2]], [M[1,2-C6H4(CH2SbMe2)2]2][PF6]2 (M = Pd or Pt), and [NiI[1,2-C6H4(CH2SbMe2)2]2]ClO4 have been determined, and the varying chelate bite and conformations of the xylyl backbone in these structures are discussed. Despite the unfavourable seven-membered chelate ring and the large soft antimony donors, 1,2-C6H4(CH2SbMe2)2 proves to be a surprisingly good ligand for late transition metals in medium oxidation states.     

Nitrosoarene-CuI complexes are intermediates in copper-catalyzed allylic amination

Reactions of nitrosobenzene and N,N'-diethyl-4-nitrosoaniline with [Cu(CH3CN)4]PF6 produce novel homoleptic Cu(I)-nitrosoarene complexes, [Cu(ArNO)3]PF6, 1 (Ar = Ph) and 2 (Ar = 4-Et2NC6H4NO). The X-ray structure of 2 reveals that the copper is coordinated in a severely distorted trigonal planar geometry to the N-atom of the nitrosoarene ligand. Reactions of the PhNO complex 1 with olefins and an olefin/diene mixture provide evidence for its role as an intermediate and possibly the active nitrogen transfer agent in the Cu-catalyzed allylic amination of olefins by aryl hydroxylamines.