Conformation effect of oligosilane linker on photoinduced electron transfer of tetrasilane-linked zinc porphyrin–[60]fullerene dyads

A series of zinc porphyrin–[60]fullerene dyads linked by conformation-constrained tetrasilanes and permethylated tetrasilane have been synthesized for the evaluation of the conformation effect of the tetrasilane linkers on the photoinduced electron transfer. The excited-state dynamics of these dyads have been studied using the time-resolved fluorescence and absorption measurements. The fluorescence of the zinc porphyrin moiety in each dyad was quenched by the electron transfer to the fullerene moiety. The transient absorption measurements revealed that the final state of the excited-state process was a radical ion pair with a radical cation on the zinc porphyrin moiety and a radical anion on the fullerene moiety as a result of the charge separation. The charge separation and charge recombination rates were found to show only slight conformation dependence of the tetrasilane linkers, which is characteristic for the Si-linkages.     

Synthesis and characterization of porphyrin-ferrocene-fullerene triads

Novel porphyrin-fullerene systems linked by ferrocene and related model compounds were successfully synthesized and characterized. Conformationally flexible 1,1′-disubstituted ferrocene functioned as effective modulator of the conformation between porphyrin and fullerene, as ¹H NMR spectra indicated, the porphyrin and C₆₀ moieties in the triads showed gauche type conformation. The electrochemical and photophysical studies showed that there were considerable interactions between porphyrin and fullerene in the ground state due to intramolecular π-stacking of the these two chromophores, assisted by the ferrocence linker. Fluorescence lifetime measurements indicated there might be two different quenching processes occurring simultaneously (intersystem crossing and electron transfer).     

Self‐Sorting of Cyclic Peptide Homodimers into a Heterodimeric Assembly Featuring an Efficient Photoinduced Intramolecular Electron‐Transfer Process

We describe the thermodynamic characterisation of the self‐sorting process experienced by two homodimers assembled by hydrogen‐bonding interactions through their cyclopeptide scaffolds and decorated with Zn–porphyrin and fullerene units into a heterodimeric assembly that contains one electron‐donor (Zn–porphyrin) and one electron‐acceptor group (fullerene). The fluorescence of the Zn–porphyrin unit is strongly quenched upon heterodimer formation. This phenomenon is demonstrated to be the result of an efficient photoinduced electron‐transfer (PET) process occurring between the Zn–porphyrin and the fullerene units of the heterodimeric system. The recombination lifetime of the charge‐separated state of the heterodimer complex is in the order of 180 ns. In solution, both homo‐ and heterodimers are present as a mixture of three regioisomers: two staggered and one eclipsed. At the concentration used for this study, the high stability constant determined for the heterodimer suggests that the eclipsed conformer is the main component in solution. The application of the bound‐state scenario allowed us to calculate that the heterodimer exists mainly as the eclipsed regioisomer (75–90 %). The attractive interaction that exists between the donor and acceptor chromophores in the heterodimeric assembly favours their arrangement in close contact. This is confirmed by the presence of charge‐transfer bands centred at 720 nm in the absorption spectrum of the heterodimer. PET occurs in approximately 75 % of the chromophores after excitation of both Zn–porphyrin and fullerene chromophores. Conversely, analogous systems, reported previously, decorated with extended tetrathiafulvalene and fullerene units showed a PET process in a significantly reduced extent (33 %). We conclude that the strength (stability constant (K)×effective molarity (EM)) of the intramolecular interaction established between the two chromophores in the Zn–porphyrin/fullerene cyclopeptide‐based heterodimers controls the regioisomeric distribution and regulates the high extent to which the PET process takes place in this system.     

Synthesis and photophysical investigation of new porphyrin derivatives with beta-pyrrole ethynyl linkage and corresponding dyad with [60] fullerene

Two new beta-substituted arylethynyl meso-tetraphenylporphyrins, 2-[(4'-formyl)phenyl]ethynyl-5,10,15,20-tetraphenylporphyrin (system A) and 2-[(4'-methyl)phenyl]ethynyl-5,10,15,20-tetraphenylporphyrin (system B) and their zinc derivatives were synthesized by palladium catalysis, using a synthetic approach that affords high yields of the target systems. Comparative ultraviolet-visible (UV-vis), NMR, and cyclic voltammetry studies of such macrocycles reveal the presence of an extensive conjugation between the tetrapyrrolic ring and the linker, through pi-pi orbital interaction. This interaction was observed in the form of a "push-pull" effect that moves the electronic charge between the porphyrin and the aldehyde group of system A. System B, bearing a methyl group instead of the formyl group, was synthesized in order to evaluate the effect of the substitution on the charge delocalization, which is necessary to corroborate the push-pull mechanism hypothesis. The new porphyrin, system A, was also used as a starting material for the synthesis of new porphyrin-fullerene dyads in which the [60]fullerene is directly linked to the tetrapyrrolic rings by ethynylenephenylene subunits. Fluorescence and transient absorption measurements of the new dyads reveal that ultrafast energy and electron transfer occur, respectively, in nonpolar and polar solvents, with high values of the rate constant. The UV-vis, NMR, and cyclic voltammetry results show that it is possible for both energy and electron transfer between porphyrin and fullerene to take place through the pi-bond interaction. Such results evidence that the coupling between the donor and acceptor moieties is strong enough for possible photovoltaic applications.     

Synthesis of New Porphyrin–Fullerene Dyads Capable of Forming Charge‐Separated States on a Microsecond Lifetime Scale

A series of covalently linked axially symmetric porphyrin–fullerene dyads with a rigid pyrrolo[3,4‐c]pyrrolic linker enabling a fixed and orthogonal arrangement of the chromophores has been synthesized and studied by means of transient absorption spectroscopy and cyclic voltammetry. The lifetime of the charge‐separated state has been found to depend on the substituents on the porphyrin core, reaching up to 4 μs for a species with meso‐(p‐MeOC₆H₄) substituents. The ground and excited electronic states of model compounds have been calculated at the DFT and TD‐DFT B3LYP(6‐31G(d)) levels of theory and analyzed with regard to the effect of the substituent on the stabilization of the charge‐separated state in the porphyrin–fullerene ensemble with a view to explaining the observed dependence.     

Axial coordination of pyridyl-containing pentacenes to porphyrins

A pair of pentacenes that are functionalized in the 6-position with either a 3- or 4-pyridyl group via a triazole linker have been used to form complexes with a tetra(aryl)ruthenium(II) porphyrin through axial coordination. The pentacene–porphyrin dyads 5 and 6 have been structurally characterized through a combination of spectroscopic techniques. UV–vis spectroscopy shows that the absorption profiles of the two chromophores, the porphyrin and the pentacene, are complementary, providing absorptions throughout the UV and visible regions. While the dyads are reasonably stable in the solid state under ambient conditions they are, unfortunately, only stable in solution for hours when exposed to light and air.     

Face-to-face pacman-type porphyrin-fullerene dyads: design, synthesis, charge-transfer interactions, and photophysical studies

Pacman-type face-to-face zinc-porphyrin-fullerene dyads have been newly synthesized and studied. Owing to the close proximity of the donor and acceptor entities, strong pi-pi intramolecular interactions between the porphyrin and fullerene entities resulted in modulating the spectral and electrochemical properties of the dyads. New absorption and emission bands that correspond to the charge-transfer interactions were observed in the near-IR region. Time-resolved transient absorption studies revealed efficient photoinduced electron transfer from the singlet excited porphyrin to the fullerene entity. The rate constants for photoinduced electron transfer are analyzed in terms of the Marcus theory of electron transfer, which afforded a large electron coupling matrix element (V=140 cm(-1)) for the face-to-face dyads. As a consequence of the large charge-recombination driving force in the Marcus inverted region, a relatively long lifetime of the charge-separated state has been achieved.     

Excited-state energy-transfer dynamics of self-assembled imine-linked porphyrin dyads

Toward the development of new strategies for the synthesis of multiporphyrin arrays, we have prepared and characterized (electrochemistry and static/time-resolved optical spectroscopy) a series of dyads composed of a zinc porphyrin and a free base porphyrin joined via imine-based linkers. One dyad contains two zinc porphyrins. Imine formation occurs under gentle conditions without alteration of the porphyrin metalation state. Five imine linkers were investigated by combination of formyl, benzaldehyde, and salicylaldehyde groups with aniline and benzoic hydrazide groups. The imine-linked dyads are quite stable to routine handling. The excited-state energy-transfer rate from zinc to free base porphyrin ranges from (70 ps)(-)(1) to (13 ps)(-)(1) in toluene at room temperature depending on the linker employed. The energy-transfer yield is generally very high (>97%), with low yields of deleterious hole/electron transfer. Collectively, this work provides the foundation for the design of multiporphyrin arrays that self-assemble via stable imine linkages, have predictable electronic properties, and have comparable or even enhanced energy-transfer characteristics relative to those of other types of covalently linked systems.     

Evidence for Dual Pathway in Through‐Space Singlet Energy Transfers in Flexible Cofacial Bisporphyrin Dyads

Flexible “pacman” scaffolds built upon a calix[4]arene platform bearing a [18]crown‐6 ether and either two OH functions or two OPr groups at the lower rim have been used to generate donor–acceptor (D–A) dyads incorporating a zinc–porphyrin donor and a free‐base porphyrin acceptor. Through‐space singlet energy transfer (SET) in the D–A dyads was studied by time‐resolved fluorescence spectroscopy. Although the effects of conformational changes are well documented when the chromophores switch from a non‐cofacial to a cofacial arrangement, little is known about flexible pacman scaffolds in which the changes are limited to the distance between the chromophores. The known SET rates for reported, geometrically well‐defined, rigid pacman D–A dyads were used as calibration to estimate the D–A distances in the flexible pacman dyads. Due to the flexibility of the calix[4]arene spacer, the D–A dyads adopt a “closed” or “open” geometry that is tuned by intramolecular hydrogen bonds (O? H???[18]crown‐6 ether) and by solvent interactions. Changes in the SET rates between the open and closed geometries were surprisingly less dramatic than expected, and are explained by a dual SET pathway that is specific to the calix[4]arene platform. Time‐resolved fluorescence studies support the hypothesis that, for the “open” conformer, the preferred through space SET pathway (i.e., at the shortest distance) is located within the calix[4]arene cavity through the cofacial phenyl groups. For the “closed” conformer, the preferred through space SET route is located between the zinc and free‐base porphyrins.     

Synthesis of "Porphyrin-linker-Thiol" molecules with diverse linkers for studies of molecular-based information storage

The attachment of redox-active molecules such as porphyrins to an electroactive surface provides an attractive approach for electrically addressable molecular-based information storage. Porphyrins are readily attached to a gold surface via thiol linkers. The rate of electron transfer between the electroactive surface and the porphyrin is one of the key factors that dictates suitability for molecular-based memory storage. This rate depends on the type and length of the linker connecting the thiol unit to the porphyrin. We have developed different routes for the preparation of thiol-derivatized porphyrins with eight different linkers. Two sets of linkers explore the effects of linker length and conjugation, with one set comprising phenylethyne units and one set comprising alkyl units. One electron-deficient linker has four fluorine atoms attached directly to a thiophenyl unit. To facilitate the synthesis of the porphyrins, convenient routes have been developed to a wide range of aldehydes possessing a protected S-acetylthio group. An efficient synthesis of 1-(S-acetylthio)-4-iodobenzene also has been developed. A set of porphyrins, each bearing one S-acetyl-derivatized linker at one meso position and mesityl moieties at the three remaining meso positions, has been synthesized. Altogether seven new aldehydes, eight free base porphyrins and eight zinc porphyrins have been prepared. The zinc porphyrins bearing the different linkers all form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each porphyrin is electrochemically robust and exhibits two reversible oxidation waves.     

Charge-transfer interactions in face-to-face porphyrin-fullerene systems: solvent-dependent luminescence in the infrared spectral region

The cyclophane-type molecular dyads 1 x 2H and 1 x Zn, in which a doubly bridged porphyrin donor adopts a close, tangential orientation relative to the surface of a fullerene acceptor, were prepared by Bingel macrocylization. The porphyrin derivatives 2 x 2H and 2 x Zn with two appended, singly linked C60 moieties were also formed as side products. NMR investigations revealed that the latter compounds strongly prefer conformations with one of the carbon spheres nesting on the porphyrin surface, thereby taking a similar orientation to that of the fullerene moiety in the doubly bridged systems. Cyclic voltammetric measurements showed that the mutual electronic effects exerted by the fullerene on the porphyrin and vice versa are only small in all four dyads, despite the close proximity of the donor and acceptor components. The steady-state and time-resolved absorption and luminescence properties of 1 x Zn and 2 x Zn were investigated in toluene solution and it was shown that, upon light excitation, both the porphyrin- and the fullerene-centered excited states are deactivated to a lower-lying CT state, emitting in the IR spectral region (lambda max = 890 and 800 nm at 298 and 77 K, respectively). In the more polar solvent benzonitrile, this CT state is still detected but, owing to its very low energy (below 1.4 eV), is not luminescent and shorter-lived than in toluene. The remarkable observation of similar photophysical behavior of 1 x Zn and 2 x Zn suggests that a tight donor-acceptor distance cannot only be established in doubly bridged cyclophane-type structures but also in singly bridged dyads, by taking advantage of favourable fullerene-porphyrin ground-state interactions.     

Exciplex intermediates in photoinduced electron transfer of porphyrin-fullerene dyads

The photoinduced electron transfer in differently linked zinc porphyrin-fullerene dyads and their free-base porphyrin analogues was studied in polar and nonpolar solvents with femto- to nanosecond absorption and emission spectroscopies. A new intermediate state, different from the locally excited (LE) chromophores and the complete charge-separated (CCS) state, was observed. It was identified as an exciplex. The exciplex preceded the CCS state in polar benzonitrile and the excited singlet state of fullerene in nonpolar toluene. The behavior of the dyads was modeled by using a common kinetic scheme involving equilibria between the exciplex and LE chromophores. The scheme is suitable for all the studied porphyrin-fullerene compounds. The rates of reaction steps depended on the type of linkage between the moieties. The scheme and Marcus theory were applied to calculate electronic couplings for sequential reactions, and consistent results were obtained.     

Potassium ion controlled switching of intra- to intermolecular electron transfer in crown ether appended free-base porphyrin-fullerene donor-acceptor systems

Photoinduced electron transfer in intramolecularly interacting free-base porphyrin bearing one or four 18-crown-6 ether units at different positions of the porphyrin macrocycle periphery and pristine fullerene was investigated in polar benzonitrile and nonpolar o-dichlorobenzene and toluene solvents. Owing to the presence of two modes of binding, stable dyads were obtained in which the binding constants, K, were found to range between 4.2 x 10(3) and 10.4 x 10(3) M(-1) from fluorescence quenching data depending upon the location and number of crown ether entities on the porphyrin macrocycle and the solvent. Computational studies using the B3LYP/3-21G() method were employed to arrive at the geometry and electronic structure of the intramolecular dyads. The energetics of the redox states of the dyads were established from cyclic voltammetric studies. Under the intramolecular conditions, both the steady-state and time-resolved emission studies revealed efficient quenching of the singlet excited free-base porphyrin in these dyads, and the measured rates of charge separation, k(CS), were found to be in the 10(8)-10(9) s(-1) range. Nanosecond transient absorption studies were performed to characterize the electron-transfer products and to evaluate the charge-recombination rates. Shifting of the electron-transfer pathway from the intra- to intermolecular route was achieved by complexing potassium ions to the crown ether cavity(ies) in benzonitrile. This cation complexation weakened the intramolecular interactions between fullerene and the crown ether appended free-base porphyrin supramolecules, and under these conditions, intermolecular type interactions were mainly observed. Reversible inter- to intramolecular electron transfer was also accomplished by extracting the potassium ions of the complex with the addition of 18-crown-6. The present study nicely demonstrates the application of supramolecular methodology to control the excited-state electron-transfer path in donor-acceptor dyads.     

Photoinduced electron transfer in self-assembled monolayers of porphyrin-fullerene dyads on ITO

Two porphyrin-fullerene dyads were synthesized to form self-assembled monolayers (SAMs) on indium-tin oxide (ITO) electrode, with either ITO-porphyrin-fullerene or ITO-fullerene-porphyrin orientations. The dyads contain two linkers for connecting the porphyrin and fullerene moieties and enforcing them essentially to similar geometries of the donor-acceptor pair, and two linkers to ensure the attachment of the dyads to the ITO surface with two desired opposite orientations. The transient photovoltage responses (Maxwell displacement charge) were measured for the dyad films covered by insulating LB films, thus ensuring that the dyads interact only with the ITO electrode. The direction of the electron transfer was from the photoexcited dyad to ITO independent of the dyad orientation. The response amplitude for the ITO-fullerene-porphyrin structure, where the primary intramolecular electron-transfer direction coincides with the direction of the final electron transfer from the dyad to ITO, was 25 times stronger than that for the opposite ITO-porphyrin-fullerene orientation of the dyad. Static photocurrent measurements in a liquid electrochemical cell, however, show only a minor orientation effect, indicating that the photocurrent generation is controlled by the processes at the SAM-liquid interface.     

Photoinduced intermolecular and intramolecular actions between eosin and porphyrin

Two dyads of eosin and porphyrin linked with a semi-rigid (-CH2phCH2-) or flexible (-(CH2)4-) bridge and their reference model compounds were synthesized and characterized The intermoleccular interaction and intramolecular photoinduced singlet energy transfer and electron transfer were studied by their absorp tion spectra,fluorescence emission,excitation spectra and fluorescence lifetime The model compounds,ethyl ester of eosm (EoEt) and porphyrin (PorEt),could form complexes in the ground state.When the eosin moieties in dyads were excited,they could transfer some singlet energy to the porphyrins; in the meantime,they could also ndsce electron transfer between two chromophores.Exciting the porphyrin moieties in dyads could induce electron transfer from eosin moieties to porphyrin moieties.The efficiencies (EnT,ET) and rate constants (kEnT,kET) were related to the polarity of solvents and mutual orientation of the two chromophores in dyads.     

Porphyrin dyads bearing carbon tethers for studies of high-density molecular charge storage on silicon surfaces

Redox-active molecules that afford high charge density upon attachment to an electroactive surface are of interest for use in molecular-based information-storage applications. One strategy for increasing charge density is to covalently link a second redox center to the first in an architecture that uses the vertical dimension in essentially the same molecular footprint. Toward this end, a set of four new porphyrin dyads have been prepared and characterized. Each dyad consists of two zinc porphyrins, an intervening linker (p-phenylene or 4,4'-diphenylethyne), and a surface attachment group (ethynyl or triallyl group). The porphyrin dyads were attached to an electroactive Si(100) surface and interrogated via electrochemical and FTIR techniques. The charge density obtainable for the ethynyl-functionalized porphyrin dyads is approximately double that observed for an analogously functionalized monomer, whereas that for the triallyl-functionalized dyads is at most 40% larger. These results indicate that the molecular footprint of the former dyads is similar to that of a monomer while that of the latter dyads is larger. For both the ethynyl- and triallyl-functionalized porphyrin dyads, higher charge densities (smaller molecular footprints) are obtained for the molecules containing the 4,4'-diphenylethyne versus the p-phenylene linker. This feature is attributed to the enhanced torsional flexibility of the former linker compared with that of the latter, which affords better packed monolayers. The FTIR studies indicate that the adsorption geometry of all the dyads is qualitatively similar and similar to that of monomers. However, the dyads containing the 4,4'-diphenylethyne linker sit somewhat more upright on the surface than those containing the p-phenylene linker, generally consistent with the smaller molecular footprint for the former dyads. Collectively, the high surface charge density (34-58 muC.cm(-)(2)) of the porphyrin dyads makes these constructs viable candidates for molecular-information-storage applications.     

Photoinduced electron transfer in Langmuir-Blodgett monolayers of porphyrin-fullerene dyads

A series of electron donor-acceptor (DA) dyads, composed of a porphyrin donor and a fullerene acceptor covalently linked with two molecular chains, were used to fabricate solid molecular films with the Langmuir-Blodgett (LB) technique. By means of the LB technique, the DA molecules can be oriented perpendicular to the plane of the substrate. In DHD6ee and its zinc derivative hydrophilic groups are attached to the phenyl moieties in the porphyrin end of the molecule; while in the other three dyads, TBD6a, TBD6hp, and TBD4hp, the hydrophilic groups are in the fullerene end of the molecule. This makes it possible to alternate the orientation of the molecules in two opposite directions with respect to the air-water interface and to fabricate molecular assemblies in which the direction of the primary photoinduced vectorial electron transfer can be controlled both by the deposition direction of the LB monolayer and by the selection of the used DA molecule. This was proved by the time-resolved Maxwell displacement charge measurements. The spectroscopic properties of the DA films were studied with the steady-state absorption and fluorescence methods. In addition, the time correlated single photon counting technique was used to determine the fluorescence properties of the dyad films.     

Synthesis and photophysics of porphyrin-fullerene donor-acceptor dyads with conformationally flexible linkers

The synthesis and photophysics of a series of porphyrin-fullerene (P-C₆₀) dyads in which the two chromophores are linked by conformationally flexible polyether chains is reported. Molecular modeling indicates the two moieties adopt a stacked conformation in which the two chromophores are in close proximity. Photoexcitation of the free base dyads in polar solvents such as tetrahydrofuran and benzonitrile, causes electron transfer (ET) to generate charge-separated radical pair (CSRP) states, which were directly detected using transient absorption (TA) techniques. In nonpolar solvents such as toluene, where CSRP states were not directly detected, fullerene triplet state states were formed, according to TA studies as well as singlet oxygen sensitization measurements. The low value of the quantum efficiency for sensitized formation of singlet molecular oxygen [O₂(¹Δ_g)] in toluene and chloroform indicates that singlet energy transduction to give H₂P-¹C₆₀*, followed by intersystem crossing to H₂P-³C₆₀* and energy transfer to ³O₂, is not the operative mechanism. Rather, a mechanism is proposed involving ET to give CSRP states followed by exergonic charge recombination to eventually generate fullerene triplets. Such a mechanism has been demonstrated experimentally for structurally related P-C₆₀ dyads. For the corresponding ZnP-C₆₀ dyads with flexible linkers, only photoinduced ET to generate long-lived CSRP states is observed. Photoinduced charge separation in these dyad systems is extremely rapid, consistent with a through space rather than through-bond mechanism. Charge recombination is up to three orders of magnitude slower, indicating this process occurs in the inverted region of the Marcus curve that relates ET rates to the thermodynamic driving force. These observations once again demonstrate the advantages of incorporating fullerenes as electron acceptor components in photosynthetic model systems.     

Supramolecular inclusion complexes of two cyclic zinc bisporphyrins with C60 and C70: structural, thermodynamic, and photophysical characterization

The formation of thermodynamically stable inclusion complexes between two cyclic zinc bisporphyrins, differing in the saturation degree of the hydrocarbon linkers that connect their porphyrin units, and the fullerenes C(60) and C(70) is described. Binding and photophysical studies were performed in two solvents of very different polarity: toluene and dichloromethane. UV/Vis and fluorescence titration experiments showed π-π interactions between the cyclic zinc bisporphyrins and the fullerenes. Solid-state structures were determined by X-ray diffraction analysis and gave valuable insight into the different complexation behaviors of the two macrocyclic systems towards the fullerenes. NMR titrations were also helpful in understanding the geometry of the complexes in solution. Upon fullerene complexation, the two macrocyclic bisporphyrins adopt very distinct conformations. Charge-transfer absorption bands point to ground-state interactions, and quenching of the porphyrin component luminescence indicates fast reactivity in the excited states. Energy transfer plus HOMO-HOMO and LUMO-LUMO electron-transfer processes occur within the complexes. Charge-separated states characterized by a reduced fullerene and an oxidized porphyrin radical, with lifetimes in the order of several hundred picoseconds, are detected.     

Sequence and linker dependent chiral dimerization of DNA–porphyrin conjugates

Circular dichroism (CD), UV–vis absorption, fluorescence, and resonance light scattering (RLS) spectroscopies were used to elucidate the role of the DNA sequence, linkers between DNA and porphyrin, and metal in the porphyrin coordination center on the self-assembly of DNA–porphyrin conjugates. A series of eight non-self-complementary DNA–porphyrin conjugates have been synthesized with zinc and free-base porphyrins covalently attached to the short ODNs (A₈ or T₈) via amide or phosphate linker. A small structural modification (e.g., amide linker replaced by the phosphate linker) showed a dramatic effect on the aggregation properties of DNA–porphyrin conjugates and greatly altered their spectroscopic properties. At low ionic strength, porphyrin aggregation was not observed for any conjugate. An increase in the ionic strength caused two out of eight conjugates to form chiral porphyrin dimers.