New synthetic ways for the preparation of high-performance liquid chromatography supports.

The latest developments and in particular important synthetic aspects for the preparation of modern HPLC supports are reviewed. In this context, the chemistry of inorganic supports based on silica, zirconia, titania or aluminum oxide as well as of organic supports based on poly(styrene-divinylbenzene), acrylates, methacrylates and other, more specialized polymers is covered. Special consideration is given to modern approaches such as sol-gel technology, molecular imprinting, perfusion chromatography, the preparation of monolithic separation media as well as to organic HPLC supports prepared by new polymer technologies such as ring-opening metathesis polymerization. Synthetic particularities relevant for the corresponding applications are outlined.     

含二氮杂荼酮结构新型聚芳醚系列高性能聚合物的合成与性能

从分子结构设计出发 ,以价廉易得的苯酚、苯酐为原料 ,经温和的工艺合成了结构全新的 4 ( 4′ 羟基苯基 ) 2 ,3 二氮杂萘 1 酮 (DHPZ) ,对其合成反应路线、合成反应动力学、反应机理进行了深入研究 .在大量实验研究基础上 ,结合分子立体结构的计算机模拟 ,确认其具有非共平面扭曲结构特征 ,其N—H键和O—H键具有类似的反应活性 ,是一种类似双酚的新单体 .以DHPZ与多种市售双卤单体如二氟二苯酮 (DFK)、二氯二苯砜 (DCS)、二氯二苯双酮 (DCKK)、二氯二苯腈 (DCBN)等经溶液亲核取代逐步聚合反应制得一系列含二氮杂萘酮结构的新型高性能聚醚砜 (PPES)、聚醚酮 (PPEK)、聚醚砜酮 (PPESK)、聚醚酮酮 (PPEKK)、聚醚砜酮酮(PPESKK)、聚醚腈酮 (PPENK)、聚醚腈砜 (PPENS)、聚醚腈砜酮 (PPENSK)等 ,对其结构进行了谱学表征 ,对其性能进行了全面测试 ,研究了其结构与性能关系 .谱学数据证明皆为无定型高聚物 .其玻璃化温度Tg 在 2 5 0～370℃之间 ,可以通过取代基团结构或主链上砜 酮基团比例进行调控 .在大量实验研究基础上 ,创造性提出“引入全芳环非共平面扭曲分子链结构赋予高聚物既耐高温又可溶解的优异综合性能”的分子结构设计理论 .在此分子设计理论指导下 ,设计并合成了含联苯二氮杂萘酮结构的新型二     

Polyisobutylene supports—a non-polar hydrocarbon analog of PEG supports

Synthetic routes to terminally functionalized polyisobutylene oligomers useful as supports in synthesis and catalysis are discussed and described. Such hydrocarbon polymers serve as highly soluble non-polar analogs of well known poly(ethylene glycol) supports for synthesis and catalysis with the difference that they are separated after a reaction by an extraction with alkane solvent.     

Immobilized polymeric stationary phases using metalized silica supports

Immobilized presynthesized polymers on porous metalized (zirconized or titanized) silica particles as new stationary phases with improved chemical stability for RP-HPLC are reviewed. The preparations using different polymers, such as poly(methyloctylsiloxane), poly(methyltetradecylsiloxane), and poly(butadiene), different immobilization steps (gamma radiation, thermal treatment, and microwave radiation), and the chromatographic performances of these phases for polar, apolar, acidic, and basic compounds are discussed. The stability of some of these stationary phases using alkaline mobile phases is also presented.     

Characterization of Engineering Polymers by Dynamic Mechanical Analysis

There is a growing need for the use of polymers in high-strength and engineering applications, and many new materials and composites have been developed to satisfy this need. Traditionally, thermosetting polymers have been employed as high-strength materials, with the incorporation of various fillers or additives to improve shortcomings in strength and temperature performance. Although these materials are largely unrivaled in high-temperature performance, some of the newer engineering thermoplastics, such as poly(ether ether ketone)(PEEK), poly(ether sulfone) (PES), poly(pheny1ene sulfide) (PPS), and the new backbone liquid-crystal polymers are becoming much more widely used. With this widespread use and with the increasing complexity of polymer blends and composites, there is a strong requirement for a universal means of characterizing such materials in terms of mechanical properties and high-temperature performance. A powerful and versatile analytical technique which is capable of application to a very wide range of materials is that of dynamic mechanical spectrometry. This technique can be used to establish basic material relaxation temperatures and frequencies, the modulus and loss behavior, as well as factors such as degree of cure, fder/matrix bonding, and phase separation.     

pH‐sensitive hemolysis by random copolymers of alkyl acrylates and acrylic acid

We have been designing and synthesizing synthetic polymers that mimic viral fusogenic peptides, which contain peptide residues having alkyl groups and carboxyl groups. We have synthesized two different types of such polymers, and their abilities to hemolyse red blood cells at pH 7.4 and 5.5 are compared here. The polymers are poly(2‐alkylacrylic acid)s such as poly(2‐propylacrylic acid), and random copolymers of poly(alkyl acrylate‐co‐acrylic acid) where the alkyl group is propyl or butyl. We have found that the poly(2‐alkylacrylic acid)s such as poly(2‐propylacrylic acid) are significantly more hemolytic at acidic pH than the random copolymers of equivalent propyl and carboxyl contents.     

A biostimulation-based accelerated method for evaluating the biodegradability of polymers

The high cost and long duration of the existing standard tests, such as ASTM D5338 and ISO 14855, represents an important drawback in evaluating the biodegradability of polymers. This works presents a new accelerated method for this purpose, based on the use of a Bartha respirometer and biostimulation with yeast extract. The new method was applied to microcrystalline cellulose (MCC), low density polyethylene (LDPE), poly(3-hidroxybutyrate) (PHB), poly(lactic acid) (PLA), poly(vinyl alcohol) (PVOH), polypropylene (PP) and poly(ethylene terephthalate) (PET). The results obtained with these polymers were consistent with those of the standard methods in terms of differentiating biodegradable and non-biodegradable polymers and relative order of biodegradation extent. Besides, a significant reduction of test duration was achieved (from 45 to 110 days with ASTM D5338 or ISO 14855 to 28 days). These results corroborate the potential of the proposed method as a fast test for assessment of biodegradation of polymeric materials.     

多功能性聚吡咯复合膜

聚吡咯具有较高的电导率与良好的环境稳定性,被视为继聚苯胺之后最有工业化应用前景的导电高分子材料之一。聚吡咯与常规聚合物基体如聚乙烯醇、聚氯乙烯等形成的复合膜不仅可以综合聚吡咯奇异的多功能性与常规聚合物的易成膜性和低成本性于一体,而且可望发挥两者的协同效应,从而大大拓宽其应用领域。该研究已经成为导电聚合物研究领域中的又一新热点。作者系统论述了制备这类功能复合膜的两种典型制备方法,并在分析各自特点的基础上提出了改进与发展方向,指出聚吡咯复合膜具有广泛可调的电导率、快速的电学响应性以及稳定的电致变色性等多种功能,在透明导电膜、化学传感器、生物分离膜、电致变色膜领域具有诱人的应用前景。     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

Adapting semiconducting polymer doping techniques to create new types of click postfunctionalization

After the historical development from the insoluble polyacetylene film to soluble and processible aromatic polymers, donor-acceptor-type aromatic polymers have recently emerged as a new class of semiconducting polymers. The polymer energy levels and band gaps can be tuned by the appropriate selection of the donor and acceptor moieties, and some of these polymers showed good optoelectronic or photovoltaic performances. The conventional synthetic method for achieving donor-acceptor-type aromatic polymers is based on the metal-catalyzed polycondensation between donor-type monomers and acceptor-type co-monomers. In this tutorial review, a new methodology for introducing donor-acceptor chromophores into semiconducting polymers is described. The donor-acceptor structures are constructed in the main chains and side chains of semiconducting polymers using a polymer reaction based on high-yielding addition reactions between the electron-rich alkynes and strong acceptor molecules, such as tetracyanoethylene (TCNE) and 7,7,8,8-tetracyanoquinodimethane (TCNQ). Considering the p-type doping features of TCNE and TCNQ, the experimental procedure is the same as the conventional doping technique for semiconducting polymers. However, the resulting donor-acceptor type polymers are chemically stable due to the absence of unstable unpaired electrons (polarons). The donor-acceptor alternating polymers were achieved in one step from the precursor poly(aryleneethynylene)s and poly(arylenebutadiynylene)s. When the side chain alkynes were post-functionalized, the polymer energy levels were controlled by the species and amount of the employed acceptor molecules. These atom-economic acceptor additions satisfy most of the requirements of the "click chemistry" concept. In contrast to the conventional click chemistry reactions, the reactions between electron-rich alkynes and acceptor molecules provide a wide variety of polymers with promising optoelectronic applications.     

New strategies for synthesis of partially fluorinated heterocycles as precursors for trifluoromethyl-substituted polymers

The building-block strategy is applied to the synthesis of new compounds with two five-membered heteroaromatic units. The heteroaromatic rings contain a fluorine atom which is activated towards nucleophilic displacement reactions by an adjacent trifluoromethyl group. The difunctional compounds can be converted into poly(arylene ether)s by base-catalyzed polycondensation with bisphenols or bisthiophenols. Trifluoromethylated poly(arylether oxazole)s and poly(arylthioether oxazole)s are obtained by this route. All representatives of these two new classes of polymers are soluble in common organic solvents. Reaction conditions for the polycondensation as well as thermal stability, glass transition temperatures, and molar masses of the polymers are described.     

Synthesis and properties of poly(arylene ether phenyl-s-triazine)s

A series of new poly(arylene ether phenyl-s-triazine)s was prepared by the nucleophilic aromatic substitution polymerization of the potassium salt of bisphenols with 2,4-bis (halophenyl)-6-phenyl-s-triazine in N-methyl-2-pyrrolidone at elevated temperature. The polymers with inherent viscosities exceeding 0.5 were obtained after polymerization for 1 h using 2,4-bis(fluorophenyl)-6-phenyl-s-triazine as a monomer. The glass transition temperatures of the resulting polymers ranged from 200 to 260°C depending on the bisphenol used in the polymer synthesis. The poly(arylene ether phenyl-s-triazine)s demonstrated excellent thermal stabilities in excess of 490°C (5% weight loss in air). The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether phenyl-s-triazine)s belong to the most superior class of heat resistant polymers, such as polyimide Kapton?. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of conjugated fluoroalkyl ether-substituted polythiophenes prepared in organic solvent and supercritical carbon dioxide

A number of new fluoroalkyl ether-containing polythiophenes are synthesized via oxidative polymerization in supercritical CO₂ (scCO₂) and chloroform. In both cases, high-molecular-mass polymers with high yields are prepared. The properties of the polymers synthesized in scCO₂, such as molecular mass, polydispersity, conjugation, and UV absorption, are similar to the properties of the polymers obtained in chloroform. All poly(fluoroalkyl ether thiophenes) show solubility in DMF, toluene, THF, chloroform, and acetone. The glass-transition temperatures of the polymers are in the range 58–82°C, and the temperatures corresponding to 10% loss in their weight are in the ranges 248–294 and 260–303°C for poly(fluoroalkyl ether thiophenes) synthesized in scCO₂ and chloroform, respectively. All polymers fluoresce in the blue region with emission maxima at 506 to 526 nm. Because of the unique combination of fluoroalkyl and carbonyl groups, poly(fluoroalkyl ether thiophenes) feature good solubility in scCO₂, which is a promising alternative solvent for the oxidative polymerization of fluoroalkyl ether thiophenes.     

Considerations about the electrochemical estimation of the ionization potential of conducting polymers

The energy gap and ionization potential of some conducting polymers such as polypyrrole and the polythiophene derivatives, poly(3-methylthiophene) and poly(3-hexylthiophene), are estimated using optical and electrochemical techniques. With these parameters we have constructed the energy level diagrams of the polymers. Electronic Publication     

The effect of crosslinking on thermal and mechanical properties of perfluorocyclobutane aromatic ether polymers

As the minimum features in semiconductor devices decrease, it is a new trend to incorporate copper and polymers with dielectric constant less than 3.0 to enhance the performance of the devices. Two fluorinated polymers, poly(biphenyl perfluorocyclobutyl ether) (BPFCB) and poly(1,1,1-triphenyl ethane perfluorocyclobutyl ether) (PFCB), are newly developed polymers with dielectric constants below 3.0. These two polymers have a similar backbone structure, but PFCB has the capability of crosslinking. To know the implications of these two polymers in the semiconductor industry, properties that are important for the integral reliability of Integral Circuits (IC), such as thermal and mechanical properties, should be understood. This comparative study shows that the crosslinking in perfluorocyclobutane aromatic ether polymer can reduce vertical thermal expansion and increase glass transition temperature (T_g) while water absorption, crystalline-like phase, and dielectric constant are slightly increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1383–1392, 1998     

Precise Synthesis of New Triblock Co- and Terpolymers by a Methodology Combining Living Anionic Polymers with a Specially Designed Linking Reaction

Five A-B-A′, A-C-A′, B-A-B′, C-A-C′, and C-B-C′ triblock terpolymers with block orders difficult to synthesize by sequential polymerization have been successfully synthesized by a new methodology combining living anionic polymers with a specially designed linking reaction using α-phenylacrylate as the reaction site. Here, A(A′), B(B′), and C(C′) represent groups of polymers (having chain-end anions with different nucleophilicities), which are only polymerizable from A(A′) to B(B′) to C(C′) via sequential polymerization. The corresponding polymers are polystyrene (A) and poly(α-methylstyrene) (A′), poly(2-vinylpyridine) (B) and poly(4-vinylpyridine) (B′) and polymers from methacrylate type monomers like poly(methyl methacrylate) (C), poly(tert-butyl methacrylate) (C′), poly(2-hydroxyethyl methacrylate) (C′), poly(2,3-dihydroxypropyl methacrylate) (C′), and poly(ferrocenylmethyl methacrylate) (C′). Furthermore, three synthetically difficult B-A-B, C-A-C, and C-B-C triblock copolymers with molecular asymmetry in both side blocks have also been synthesized by the developed methodology. All of the polymers thus synthesized are quite new triblock terpolymers and copolymers with well-defined structures, i.e., precisely controlled molecular weights, compositions and narrow molecular weight distributions (M_w/M_n ≤ 1.05).     

Positronium formation at low temperatures: the role of trapped electrons

Measurements have been carried out of electron spin densities (by electron spin resonance technique) and positronium (Ps) formation probability as functions of Co-60 γ-irradiation dose in poly(methyl methacrylate) and linear poly(ethylene) at 77 K. We observe a linear relationship between the enhancement of the Ps formation and the density of trapped electrons in both polymers. This clear correlation strongly supports the previous suggestion by the authors that the increase in Ps formation with time (that has been observed at low temperatures for a number of polymers) can be explained as a reaction of free positrons with trapped electrons produced by the previously injected positrons.     

The α-halogeno ether function: formation and use in the design of tailor-made polymers

α-Halogeno ether species, in appropriate conditions, can induce the “living” cationic polymerization of vinyl ethers. They can also be used as initiators for the “living” polymerization of styrene derivatives. Therefore, their use as intermediates in the preparation of tailor-made polymers and copolymers offers interesting opportunities in macromolecular synthesis. The main parameters which determine and control their reactivity are reviewed and discussed. The possibility to generate quantitatively these derivatives by various routes and from different organic functions such as aldehyde, ketone, acetal and hydroxyl is examined. Some of these routes have been used to generate the α-halogeno ether function directly at the end of acetal and hydroxy-terminated polymers. The latter have then been used as macroinitiators to prepare new block copolymers. The synthesis of poly(isobutyl vinyl ether-β-ethyl vinyl ether), poly(styrene-β-chloroethyl vinyl ether) and poly(chloroethyl vinyl ether-β-butadiene-β-chloroethyl vinyl ether) by this technique is described.     

Egg-white protein fractionation using new weak anion-exchange resins based on poly(glycidyl methacrylate-co-ethylendimethacrylate). Preparation and characterization

A new formulation for a poly(glycidyl methacrylate-co-ethylendimethacrylate)-based resin with a 11:9 proportion of monomer to crosslinker is developed and amino-functionalized in order to obtain new particulate materials suitable for egg-white protein fractionation. Functionalization is carried out using three different chemical reagents: diethylamine (DEA), DEA-tetrahydrofuran (THF) (1:1), and concentrated ammonia. The ammonia- and DEA-THF-treated polymers are used to fractionate egg-white proteins, in particular lysozyme and ovalbumin, by anion-exchange chromatography in packed column experiments, the latter resin showing better performances. Finally, both supports, working at semipreparative scale and step-gradient elution, separate pure ovalbumin with a yield of 83%.     

Uniform polyolefin and polymethacrylate

Preparations and properties of synthetic uniform polyolefins and polymethacrylates are described with emphasizing the necessity of their utilization for understanding the fundamental problems in polymer chemistry. Uniform polymer is a polymer composed of molecules uniform with respect to molecular weight and constitution. While classical organic chemistry provides means of constructing uniform polymers such as poly(methylene)s in stepwise manners, recent advances in separation technology such as supercritical fluid chromatography (SFC) have made it possible to isolate synthetic uniform polymers from its homologous mixture. Combinations of stereospecific polymerizations and the SFC technique have enabled us to prepare uniform polystyrenes and poly(methyl methacrylate)s with high stereoregularities, which are very useful for systematic studies on the nature of polymers. The thermal properties of these uniform polymers are discussed in some detail.