A Z‐Scheme Polyimide/AgBr@Ag Aerogel with Excellent Photocatalytic Performance for the Degradation of Oxytetracycline

A novel Z‐scheme polyimide (PI)/AgBr@Ag aerogel photocatalyst has been successfully synthesized by combining an in situ precipitation method and a supercritical drying method. The as‐prepared PI/AgBr@Ag‐50 (50 wt % AgBr@Ag in PI/AgBr@Ag) aerogel photocatalyst exhibited excellent photocatalytic activity for oxytetracycline degradation with a rate constant of 0.025 min^?1, which was 6.9 and 2.6 times higher than that of the PI aerogel or the AgBr@Ag nanoparticles, respectively. More significantly, the PI/AgBr@Ag‐50 aerogel photocatalyst showed stable cycling, which could be attributed to the high mechanical strength and 3D network of the PI aerogel. The introduction of AgBr@Ag on PI with a heterojunction structure efficiently promoted the separation of electron–hole pairs by a Z‐scheme mechanism. The reduced metallic Ag nanoparticles were found to function as centers for the transfer of electrons from AgBr to PI. This work has revealed a new application for the aerogel PI/AgBr@Ag photocatalyst in environmental protection.     

Multi‐shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications.     

Function‐Led Design of Aerogels: Self‐Assembly of Alloyed PdNi Hollow Nanospheres for Efficient Electrocatalysis

One plausible approach to endow aerogels with specific properties while preserving their other attributes is to fine‐tune the building blocks. However, the preparation of metallic aerogels with designated properties, for example catalytically beneficial morphologies and transition‐metal doping, still remains a challenge. Here, we report on the first aerogel electrocatalyst composed entirely of alloyed PdNi hollow nanospheres (HNSs) with controllable chemical composition and shell thickness. The combination of transition‐metal doping, hollow building blocks, and the three‐dimensional network structure make the PdNi HNS aerogels promising electrocatalysts for ethanol oxidation. The mass activity of the Pd₈₃Ni₁₇ HNS aerogel is 5.6‐fold higher than that of the commercial Pd/C catalyst. This work expands the exploitation of the electrocatalysis properties of aerogels through the morphology and composition control of its building blocks.     

Hollow‐Shelled Nanoreactors Endowed with High Catalytic Activity

Hollow‐shelled nanoreactors have emerged as efficient structures to maximize the potential of nanoparticles in the field of catalysis. In this Concept article, we underline the importance of both the morphology of the active nanoparticles as well as the composition and porosity of the shell for the catalytic performance of the overall nanocomposite. Different configurations are discussed, with a focus on preparative methods and applications in organic synthesis. Perspectives on future designs that may offer new opportunities to improve the selectivity of the catalyzed transformations and add additional features are also addressed, in order to illustrate the potential of these unique nanostructures.     

Fabrication of Hierarchical Fe3O4@SiO2@P(4VP‐DVB)@Au Nanostructures and Their Enhanced Catalytic Properties

Hierarchical Fe₃O₄@SiO₂@P(4VP‐DVB)@Au nanostructures were prepared in which the slightly cross‐linked, thin poly(4‐vinylpyridine‐co‐divinylbenzene) (P(4VP‐DVB)) shells were constructed onto Fe₃O₄@SiO₂ nanospheres, followed by in situ embedding of gold nanocrystals homogeneously into the P4VP chains. These slightly cross‐linked chains, easily swollen by the reactants, make the gold nanocrystals accessible to the reactants, and the thin shell (about 15 nm) reduces the diffusion distance of the reactants to the active gold nanocrystals (about 5 nm), thereby enhancing their catalytic activity and utility. At the same time, confinement of gold nanocrystals within the P4VP shells prevents their migration and coagulation during catalytic transformations. Hence the nanocomposites exhibit high activity (up to 4369.5 h^?1 of turnover frequency (TOF)) and controllable magnetic recyclability without any significant loss of gold species after ten runs of catalysis in the reduction of 4‐nitrophenol.     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.     

Control of Chiral Nanostructures by Self‐Assembly of Designed Amphiphilic Peptides and Silica Biomineralization

Peptides, the fundamental building units of biological systems, are chiral in molecular scale as well as in spatial conformation. Shells are exquisite examples of well‐defined chiral structures produced by natural biomineralization. However, the fundamental mechanism of chirality expressed in biological organisms remains unclear. Here, we present a system that mimics natural biomineralization and produces enantiopure chiral inorganic materials with controllable helicity. By tuning the hydrophilicity of the amphiphilic peptides, the chiral morphologies and mesostructures can be changed. With decreasing hydrophilicity of the amphiphilic peptides, we observed that the nanostructures changed from twisted nanofibers with a hexagonal mesostructure to twisted nanoribbons with a lamellar mesostructure, and the extent of the helicity decreased. Defining the mechanism of chiral inorganic materials formed from peptides by noncovalent interactions can improve strategies toward the bottom‐up synthesis of nanomaterials as well as in the field of bioengineering.     

Magnetically Recoverable Core–Shell Nanocomposites with Enhanced Photocatalytic Activity

Core–shell structured Fe₃O₄/SiO₂/TiO₂ nanocomposites with enhanced photocatalytic activity that are capable of fast magnetic separation have been successfully synthesized by combining two steps of a sol–gel process with calcination. The as‐obtained core–shell structure is composed of a central magnetite core with a strong response to external fields, an interlayer of SiO₂, and an outer layer of TiO₂ nanocrystals with a tunable average size. The convenient control over the size and crystallinity of the TiO₂ nanocatalysts makes it possible to achieve higher photocatalytic efficiency than that of commercial photocatalyst Degussa P25. The photocatalytic activity increases as the thickness of the TiO₂ nanocrystal shell decreases. The presence of SiO₂ interlayer helps to enhance the photocatalytic efficiency of the TiO₂ nanocrystal shell as well as the chemical and thermal stability of Fe₃O₄ core. In addition, the TiO₂ nanocrystals strongly adhere to the magnetic supports through covalent bonds. We demonstrate that this photocatalyst can be easily recycled by applying an external magnetic field while maintaining their photocatalytic activity during at least eighteen cycles of use.     

Synthesis of Monodisperse Hollow Carbon Nanocapsules by Using Protective Silica Shells

Monodisperse hollow carbon nanocapsules (<200 nm) with mesoporous shells were synthesized by coating their outer shells with silica to prevent aggregation during their high‐temperature annealing. Monodispersed silica nanoparticles were used as starting materials and octadecyltrimethoxysilane (C18TMS) was used as a carbon source to create core–shell nanostructures. These core–shell nanoparticles were coated with silica on their outer shell to form a second shell layer. This outer silica shell prevented aggregation during calcination. The samples were characterized by TEM, SEM, dynamic light scattering (DLS), UV/Vis spectroscopy, and by using the Brunauer–Emmett–Teller (BET) method. The as‐synthesized hollow carbon nanoparticles exhibited a high surface area (1123 m² g^?1) and formed stable dispersions in water after the pegylation process. The drug‐loading and drug‐release properties of these hollow carbon nanocapsules were also investigated.     

Clewlike ZnV2O4 Hollow Spheres: Nonaqueous Sol–Gel Synthesis,Formation Mechanism,and Lithium Storage Properties

Hollow ZnV₂O₄ microspheres with a clewlike feature were synthesized by reacting zinc nitrate hexahydrate and ammonium metavanadate in benzyl alcohol at 180 °C for the first time. GC–MS analysis revealed that the organic reactions that occurred in this study were rather different from those in benzyl alcohol based nonaqueous sol–gel systems with metal alkoxides, acetylacetonates, and acetates as the precursors. Time‐dependent experiments revealed that the growth mechanism of the clewlike ZnV₂O₄ hollow microspheres might involve a unique multistep pathway. First, the generation and self‐assembly of ZnO nanosheets into metastable hierarchical microspheres as well as the generation of VO₂ particles took place quickly. Then, clewlike ZnV₂O₄ hollow spheres were gradually produced by means of a repeating reaction–dissolution (RD) process. In this process, the outside ZnO nanosheets of hierarchical microspheres would first react with neighboring vanadium ions and benzyl alcohol and also serve as the secondary nucleation sites for the subsequently formed ZnV₂O₄ nanocrystals. With the reaction proceeding, the interior ZnO would dissolve and then spontaneously diffuse outwards to nucleate as ZnO nanocrystals on the preformed ZnV₂O₄ nanowires. These renascent ZnO nanocrystals would further react with VO₂ and benzyl alcohol, ultimately resulting in the final formation of a hollow spatial structure. The lithium storage ability of clewlike ZnV₂O₄ hollow microspheres was studied. When cycled at 50 mA g^?1 in the voltage range of 0.01–3 V, this peculiarly structured ZnV₂O₄ electrode delivered an initial reversible capacity of 548 mAh g^?1 and exhibited almost stable cycling performance to maintain a capacity of 524 mAh g^?1 over 50 cycles. This attractive lithium storage performance suggests that the resulting clewlike ZnV₂O₄ hollow spheres are promising for lithium‐ion batteries.     

Novel Sol–Gel Synthesis of Acidic MgF2−x(OH)x Materials

Novel magnesium fluorides have been prepared by a new fluorolytic sol–gel synthesis for fluoride materials based on aqueous HF. By changing the amount of water at constant stoichiometric amount of HF, it is possible to tune the surface acidity of the resulting partly hydroxylated magnesium fluorides. These materials possess medium‐strength Lewis acid sites and, by increasing the amount of water, Brønsted acid sites as well. Magnesium hydroxyl groups normally have a basic nature and only with this new synthetic route is it possible to create Brønsted acidic magnesium hydroxyl groups. XRD, MAS NMR, TEM, thermal analysis, and elemental analysis have been applied to study the structure, composition, and thermal behaviour of the bulk materials. XPS measurements, FTIR with probe molecules, and the determination of N₂/Ar adsorption–desorption isotherms have been carried out to investigate the surface properties. Furthermore, activity data have indicated that the tuning of the acidic properties makes these materials versatile catalysts for different classes of reactions, such as the synthesis of (all‐rac)‐[α]‐tocopherol through the condensation of 2,3,6‐trimethylhydroquinone (TMHQ) with isophytol (IP).     

Impact of Higher‐Order Structuralization on the Adsorptive Properties of Metal–Organic Frameworks

The structural processing of metal–organic frameworks (MOFs) over multiple length scales is critical for their successful use as adsorbents in a variety of emerging applications. Although significant advances in molecular‐scale design have provided strategies to boost the adsorptive capacities of MOFs, relatively little attention has been directed toward understanding the influence of higher‐order structuralization on the material performance. Herein, we present the main strategies that are currently available for the structural processing of MOFs and discuss the influence these processes can impart on the adsorptive properties of the materials. In all, this intriguing area of research is expected to provide significant opportunities to enhance the properties of MOFs further, which will ultimately aid in their optimization in the context of specific real‐world applications.     

The Co‐Entrapment of a Homogeneous Catalyst and an Ionic Liquid by a Sol–gel Method: Recyclable Ionogel Hydrogenation Catalysts

Molecular hydrogenation catalysts have been co‐entrapped with the ionic liquid [Bmim]NTf₂ inside a silica matrix by a sol–gel method. These catalytic ionogels have been compared to simple catalyst‐doped glasses, the parent homogeneous catalysts, commercial heterogeneous catalysts, and Rh‐doped mesoporous silica. The most active ionogel has been characterised by transmission electron microscopy, X‐ray photoelectron spectroscopy, and solid state NMR before and after catalysis. The ionogel catalysts were found to be remarkably active, recyclable and resistant to chemical change.     

Green,Multi‐Gram One‐Step Synthesis of Core–Shell Nanocomposites in Water and Their Catalytic Application to Chemoselective Hydrogenations

We devise a new and green route for the multi‐gram synthesis of core–shell nanoparticles (NPs) in one step under organic‐free and pH‐neutral conditions. Simply mixing core and shell metal precursors in the presence of solid metal oxides in water allowed for the facile fabrication of small CeO₂‐covered Au and Ag nanoparticles dispersed on metal oxides in one step. The CeO₂‐covered Au nanoparticles acted as a highly efficient and reusable catalyst for a series of chemoselective hydrogenations, while retaining C=C bonds in diverse substrates. Consequently, higher environmental compatibility and more efficient energy savings were achieved across the entire process, including catalyst preparation, reaction, separation, and reuse.     

Three‐Dimensional Macroassembly of Sandwich‐Like,Hierarchical, Porous Carbon/Graphene Nanosheets towards Ultralight,Superhigh Surface Area,Multifunctional Aerogels

A new, ultralight, superhigh surface area, multifunctional aerogel, which is macroassembled from sandwich‐like, hierarchical, porous carbon/graphene nanosheets, is described. The multifunctional aerogel was characterized by means of XRD, SEM, TEM, Raman spectroscopy, and UV/Vis absorption spectroscopy. The multifunctional aerogel had an ultralow density of 8 mg cm^?3 and a superhigh surface area of 2650 m² g^?1. The multifunctional aerogel was thermal stability and compressible. Meanwhile, the multifunctional aerogel exhibited high capacity for the adsorption of oils and organic solvents, unexpectedly high hydrogen adsorption and good electrochemical performance.     

Size‐Tunable Highly Luminescent SiO2 Particles Impregnated with Number‐Adjusted CdTe Nanocrystals

Highly luminescent SiO₂ particles impregnated with CdTe nanocrystals (NCs) are prepared by a sol–gel procedure. Partial ligand exchange from thioglycolic acid to 3‐mercaptopropyltrimethoxysilane (MPS) on the NCs enables retention of the initial photoluminescence (PL) efficiency of the NCs in water, while the simultaneous addition of a poor solvent (ethanol) results in regulated assembly of the NCs through condensation of hydrolyzed MPS. The SiO₂ particles thus prepared have, for example, a diameter of 16 nm and contain three NCs each. The PL efficiency of these particles is 40 %, while the initial efficiency is 46 % in a colloidal solution. The redshift and narrowed spectral width in PL observed after impregnation indicate that the concentration of NCs in these nearly reaches the ultimate value (on the order of 10²¹ particles per liter). The porosity of these particles is investigated by means of N₂ adsorption–desorption isotherms. Due to the SiO₂ shell, these particles have higher stability in phosphate‐buffered saline buffer solution than the initial NCs. Their potential use for labeling in bio‐applications is investigated by conjugating biotinylated immunoglobulin G to them by using streptavidin maleimide as linker. Successful conjugation is confirmed by electrophoresis in agarose gel. This preparation method is an important step towards fabricating intensely emitting biocompatible SiO₂ particles impregnated with semiconductor NCs.