A 93Nb Solid‐State NMR and Density Functional Theory Study of Four‐ and Six‐Coordinate Niobate Systems

A variable B₀ field static (broadline) NMR study of a large suite of niobate materials has enabled the elucidation of high‐precision measurement of ⁹³Nb NMR interaction parameters such as the isotropic chemical shift (δ_iso), quadrupole coupling constant and asymmetry parameter (C_Q and η_Q), chemical shift span/anisotropy and skew/asymmetry (Ω/Δδ and κ/η_δ) and Euler angles (α, β, γ) describing the relative orientation of the quadrupolar and chemical shift tensorial frames. These measurements have been augmented with ab initio DFT calculations by using WIEN2k and NMR‐CASTEP codes, which corroborate these reported values. Unlike previous assertions made about the inability to detect CSA (chemical shift anisotropy) contributions from Nb^V in most oxo environments, this study emphasises that a thorough variable B₀ approach coupled with the VOCS (variable offset cumulative spectroscopy) technique for the acquisition of undistorted broad (?1/2?+1/2) central transition resonances facilitates the unambiguous observation of both quadrupolar and CSA contributions within these ⁹³Nb broadline data. These measurements reveal that the ⁹³Nb electric field gradient tensor is a particularly sensitive measure of the immediate and extended environments of the Nb^V positions, with C_Q values in the 0 to >80 MHz range being measured; similarly, the δ_iso (covering an approximately 250 ppm range) and Ω values (covering a 0 to approximately 800 ppm range) characteristic of these niobate systems are also sensitive to structural disposition. However, their systematic rationalisation in terms of the Nb? O bond angles and distances defining the immediate Nb^V oxo environment is complicated by longer‐range influences that usually involve other heavy elements comprising the structure. It has also been established in this study that the best computational method(s) of analysis for the ⁹³Nb NMR interaction parameters generated here are the all‐electron WIEN2k and the gauge included projector augmented wave (GIPAW) NMR‐CASTEP DFT approaches, which account for the short‐ and long‐range symmetries, periodicities and interaction‐potential characteristics for all elements (and particularly the heavy elements) in comparison with Gaussian 03 methods, which focus on terminated portions of the total structure.     

A Combined Solid‐State NMR and X‐ray Crystallography Study of the Bromide Ion Environments in Triphenylphosphonium Bromides

Multinuclear (³¹P and ^79/81Br), multifield (9.4, 11.75, and 21.1 T) solid‐state nuclear magnetic resonance experiments are performed for seven phosphonium bromides bearing the triphenylphosphonium cation, a molecular scaffold found in many applications in chemistry. This is undertaken to fully characterise their bromine electric field gradient (EFG) tensors, as well as the chemical shift (CS) tensors of both the halogen and the phosphorus nuclei, providing a rare and novel insight into the local electronic environments surrounding them. New crystal structures, obtained from single‐crystal X‐ray diffraction, are reported for six compounds to aid in the interpretation of the NMR data. Among them is a new structure of BrPPh₄, because the previously reported one was inconsistent with our magnetic resonance data, thereby demonstrating how NMR data of non‐standard nuclei can correct or improve X‐ray diffraction data. Our results indicate that, despite sizable quadrupolar interactions, ^79/81Br magnetic resonance spectroscopy is a powerful characterisation tool that allows for the differentiation between chemically similar bromine sites, as shown through the range in the characteristic NMR parameters. ^35/37Cl solid‐state NMR data, obtained for an analogous phosphonium chloride sample, provide insight into the relationship between unit cell volume, nuclear quadrupolar coupling constants, and Sternheimer antishielding factors. The experimental findings are complemented by gauge‐including projector‐augmented wave (GIPAW) DFT calculations, which substantiate our experimentally determined strong dependence of the largest component of the bromine CS tensor, δ₁₁, on the shortest Br? P distance in the crystal structure, a finding that has possible application in the field of NMR crystallography. This trend is explained in terms of Ramsey’s theory on paramagnetic shielding. Overall, this work demonstrates how careful NMR studies of underexploited exotic nuclides, such as ^79/81Br, can afford insights into structure and bonding environments in the solid state.     

Unmasking melon by a complementary approach employing electron diffraction, solid-state NMR spectroscopy, and theoretical calculations-structural characterization of a carbon nitride polymer

Poly(aminoimino)heptazine, otherwise known as Liebig's melon, whose composition and structure has been subject to multitudinous speculations, was synthesized from melamine at 630 degrees C under the pressure of ammonia. Electron diffraction, solid-state NMR spectroscopy, and theoretical calculations revealed that the nanocrystalline material exhibits domains well-ordered in two dimensions, thereby allowing the structure solution in projection by electron diffraction. Melon ([C(6)N(7)(NH(2))(NH)](n), plane group p2 gg, a=16.7, b=12.4 A, gamma=90 degrees, Z=4), is composed of layers made up from infinite 1D chains of NH-bridged melem (C(6)N(7)(NH(2))(3)) monomers. The strands adopt a zigzag-type geometry and are tightly linked by hydrogen bonds to give a 2D planar array. The inter-layer distance was determined to be 3.2 A from X-ray powder diffraction. The presence of heptazine building blocks, as well as NH and NH(2) groups was confirmed by (13)C and (15)N solid-state NMR spectroscopy using (15)N-labeled melon. The degree of condensation of the heptazine core was further substantiated by a (15)N direct excitation measurement. Magnetization exchange observed between all (15)N nuclei using a fp-RFDR experiment, together with the CP-MAS data and elemental analysis, suggests that the sample is mainly homogeneous in terms of its basic composition and molecular building blocks. Semiempirical, force field, and DFT/plane wave calculations under periodic boundary conditions corroborate the structure model obtained by electron diffraction. The overall planarity of the layers is confirmed and a good agreement is obtained between the experimental and calculated NMR chemical shift parameters. The polymeric character and thermal stability of melon might render this polymer a pre-stage of g-C(3)N(4) and portend its use as a promising inert material for a variety of applications in materials and surface science.     

Assessing the potential of fast amplitude modulation pulses for improving triple‐quantum magic angle spinning NMR spectra of half‐integer quadrupolar nuclei

A comprehensive experimental and numerical study of the potential of fast amplitude (FAM) irradiation for improving the triple‐quantum (3Q) magic angle spinning (MAS) NMR spectra of half‐integer nuclei (²³Na, ²⁷Al, ⁴⁵Sc, ⁹³Nb) was carried out. Materials of academic and industrial importance, such as infrared‐emitter Na₃YSi₃O₉, microporous aluminophosphate VPI‐5, mineral andalusite, calcined kaolinite, Sc₂O₃ and relaxor ferroelectric PMN, were investigated. It was found that FAM pulses are indeed of practical relevance and particularly useful for the observation of the NMR resonances given by nuclei in distorted local environments (large quadrupole coupling constants). In addition, a novel strategy for the optimization of the FAM‐II MQ MAS NMR experiment, which improves the multiple‐ to single‐quantum coherence transfer efficiency, is also reported. Copyright © 2003 John Wiley & Sons, Ltd.     

Spin‐Polarized Structures and Solid‐State NMR Spectroscopy of Paramagnetic Compounds

On an atomic scale and with high sensitivity, solid‐state NMR spectroscopy can provide information about the electronic spin density and coupling mechanisms in paramagnetic compounds. The picture shows how the hyperfine splitting collapses through relaxation. Insights into which compounds are suitable and which approximations have to be made are given.

     

Density Functional Theory Calculations of 95Mo NMR Parameters in Solid‐State Compounds

The application of periodic density functional theory‐based methods to the calculation of ⁹⁵Mo electric field gradient (EFG) and chemical shift (CS) tensors in solid‐state molybdenum compounds is presented. Calculations of EFG tensors are performed using the projector augmented‐wave (PAW) method. Comparison of the results with those obtained using the augmented plane wave + local orbitals (APW+lo) method and with available experimental values shows the reliability of the approach for ⁹⁵Mo EFG tensor calculation. CS tensors are calculated using the recently developed gauge‐including projector augmented‐wave (GIPAW) method. This work is the first application of the GIPAW method to a 4d transition‐metal nucleus. The effects of ultra‐soft pseudo‐potential parameters, exchange‐correlation functionals and structural parameters are precisely examined. Comparison with experimental results allows the validation of this computational formalism.     

Polymorphism of N,N'-diacetylbiuret studied by solid-state 13C and 15N NMR spectroscopy, DFT calculations, and X-ray diffraction

The molecular configuration and crystal structure of solid polycrystalline N,N′′‐diacetylbiuret (DAB), a potential nitrogen‐rich fertilizer, have been analyzed by a combination of solid‐ and liquid‐state NMR spectroscopy, X‐ray diffraction, and DFT calculations. Initially a pure NMR study (“NMR crystallography”) was performed as available single crystals of DAB were not suitable for X‐ray diffraction. Solid‐state ¹³C NMR spectra revealed the unexpected existence of two polymorphic modifications (α‐ and β‐DAB) obtained from different chemical procedures. Several NMR techniques were applied for a thorough characterization of the molecular system, revealing chemical shift anisotropy (CSA) tensors of selected nuclei in the solid state, chemical shifts in the liquid state, and molecular dynamics in the solid state. Dynamic NMR spectroscopy of DAB in solution revealed exchange between two different configurations, which raised the question, is there a correlation between the two different configurations found in solution and the two polymorphic modifications found in the solid state? By using this knowledge, a new crystallization protocol was devised which led to the growth of single crystals suitable for X‐ray diffraction. The X‐ray data showed that the same symmetric configuration is present in both polymorphic modifications, but the packing patterns in the crystals are different. In both cases hydrogen bonds lead to the formation of planes of DAB molecules. Additional symmetry elements, a two‐fold screw in the case of α‐DAB and a c‐glide plane in the case of β‐DAB, lead to a more symmetric (α‐DAB) or asymmetric (β‐DAB) intermolecular hydrogen‐bonding pattern for each molecule.     

Boronate Ligands in Materials: Determining Their Local Environment by Using a Combination of IR/Solid‐State NMR Spectroscopies and DFT Calculations

Boronic acids (R‐B(OH)₂) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R‐B(OH)₃^?) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C₄H₉‐B(OH)₃]₂, which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid‐state NMR spectroscopy (¹H, ¹³C, ¹¹B and ⁴³Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave—GIPAW—method). These data allow relationships between the geometry around the OH groups in boronates and the IR and ¹H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic–inorganic materials containing boronate building blocks.     

Aluminium Speciation in 1‐Butyl‐1‐Methylpyrrolidinium Bis(trifluoromethylsulfonyl)amide/AlCl3 Mixtures

Aluminium speciation : Aluminium speciation in NTf₂ ionic liquids has a strong influence on its electrodeposition from the liquid mixture. This work probed the nature of these species and proposes that the electroactive species involved are either [AlCl₃(NTf₂)]^? or [AlCl₂(NTf₂)₂]^? (e.g., see figure).

     

NMR Crystallography Enhanced by Quantum Chemical Calculations and Liquid State NMR Spectroscopy for the Investigation of Se-NHC Adducts**

N-heterocyclic carbene ligands (NHC) are widely utilized in catalysis and material science. They are characterized by their steric and electronic properties. Steric properties are usually quantified on the basis of their static structure, which can be determined by X-ray diffraction. The electronic properties are estimated in the liquid state; for example, via the ⁷⁷Se liquid state NMR of Se-NHC adducts. We demonstrate that ⁷⁷Se NMR crystallography can contribute to the characterization of the structural and electronic properties of NHC in solid and liquid states. Selected Se-NHC adducts are investigated via ⁷⁷Se solid state NMR and X-ray crystallography, supported by quantum chemical calculations. This investigation reveals a correlation between the molecular structure of adducts and NMR parameters, including not only isotropic chemical shifts but also the other chemical shift tensor components. Afterwards, the liquid state ⁷⁷Se NMR data is presented and interpreted in terms of the quantum chemistry modelling. The discrepancy between the structural and electronic properties, and in particular the π-accepting abilities of adducts in the solid and liquid states is discussed. Finally, the ¹³C isotropic chemical shift from the liquid state NMR and the ¹³C tensor components are also discussed, and compared with their ⁷⁷Se counterparts. ⁷⁷Se NMR crystallography can deliver valuable information about NHC ligands, and together with liquid state ⁷⁷Se NMR can provide an in-depth outlook on the properties of NHC ligands.     

A Time‐Dependent Picture of the Ultrafast Deactivation of keto‐Cytosine Including Three‐State Conical Intersections

Using mixed quantum–classical dynamics, the lowest part of the UV absorption spectrum and the first deactivation steps of keto‐cytosine have been investigated. The spectrum shows several strong peaks, which mainly come from the S₁ and S₂ states, with minor contributions from the S₃. The semiclassical trajectories, launched from these three states, clearly indicate that at least four states are involved in the relaxation of keto‐cytosine to the ground state. Non‐adiabatic transfer between the ππ* and nπ* excited states and deactivation via three‐state conical intersections is observed in the very early stage of the dynamics. In less than 100 fs, a large amount of population is deactivated to the ground state via several mechanisms; some population remains trapped in the S₂ state. The latter two events can be connected to the fs and ps transients observed experimentally.     

A concerted approach for the determination of molecular conformation in ordered and disordered materials

We present the successful application of a concerted approach for the investigation of the local environment in ordered and disordered phases in the solid state. In this approach we combined isotope labeling with computational methods and different solid-state NMR techniques. We chose triphenylphosphite (TPP) as an interesting example of our investigations because TPP exhibits two crystalline modifications and two different amorphous phases one of which is highly correlated. In particular we analyzed the conformational distribution in three of these phases. A sample of triply labeled 1-[13C]TPP was prepared and 1D MAS as well as wide-line 13C NMR spectra were measured. Furthermore we acquired 2D 13C wide-line exchange spectra and used this method to derive highly detailed information about the phenyl orientation in the investigated TPP phases. For linkage with a structure model a DFT analysis of the TPP molecule and its immediate environment was carried out. The ab initio calculations of the 13C chemical shift tensor in three- and six-spin systems served as a base for the calculation of 1D and 2D spectra. By comparing these simulations to the experiment an explicit picture of all phases could be drawn on a molecular level. Our results therefore reveal the high potential of the presented approach for detailed studies of the mesoscopic environment even in the challenging case of amorphous materials.     

Homocatenation of Aluminum: Alkane‐like Structures of Li2Al2H6 and Li3Al3H8

A new class of aluminum homocatenated compounds (Li_nAl_nH_2n+2) is proposed based on quantum chemical calculations. In these compounds, Al abstracts an electron from Li, becoming valence isoelectronic with C, Si, and Ge, thus mimicking respective structural features of Group 14 hydrides. Using the Coalescence Kick search program coupled with density functional theory calculations, we investigated the potential energy surfaces of Li₂Al₂H₆ and Li₃Al₃H₆. Then single‐point‐energy coupled‐cluster calculations were performed for the lowest energy structures found. Indeed, the global minima established for Li₂Al₂H₆ and Li₃Al₃H₆ contain the Al₂H₆^2? and Al₃H₆^3? kernels, which are isostructural with ethane (C₂H₆), disilane (Si₂H₆), digermane (Ge₂H₆) and propane (C₃H₈), trisilane (Si₃H₈), trigermane (Ge₃H₈) molecules, respectively. Structural, energetic, and electronic characteristics of the Li₂Al₂H₆ and Li₃Al₃H₈ compounds are presented and the viability of their synthesis is discussed.