A comparison of the effect of nanotube chirality and electronic properties on the π–π interaction of single‐wall carbon nanotubes with pyrazinamide antitubercular drug

Theoretical investigation on local electronic structure and stability of the π–π stacking interaction of pyrazinamide (PZA) with armchair (5,5) and zigzag (9,0) single‐walled carbon nanotubes (SWCNTs) is performed using density functional theory (DFT). PZA is physisorbed onto nanotube sidewall through interaction of π orbitals of PZA and SWCNT and the enhanced structural stability of PZA/SWCNT systems is due to weak side‐on rather than the head‐on π‐interactions. The physisorption of PZA onto SWCNT sidewall is thermodynamically favored; as a consequence, it modulates the electronic properties of pristine nanotube in the vicinity of Fermi region and π–π stacked interactions is stronger in (9,0) SWCNT compared to (5,5) SWCNT. The density of states (DOS) analysis show that PZA contributes toward the enhancement of electronic states. Projected DOS and frontier orbital analysis in the vicinity of Fermi level region suggest the electronic states to be contributed from SWCNT rather than PZA. In addition, hybrid DFT calculation which includes the dispersion correction is employed to explain the non‐covalent π–π stacking interaction between PZA and SWCNT. The local density approximation and GGA results are compared with DFT‐D to explain near about accurately the weak nonbonded van der Waals interactions between PZA and SWCNTs. © 2012 Wiley Periodicals, Inc.     

Enhanced adsorption affinity of anionic perylene-based surfactants towards smaller-diameter SWCNTs

We present evidence from multiple characterization methods, such as emission spectroscopy, zeta potential, and analytical ultracentrifugation, to shed light on the adsorption behavior of synthesized perylene surfactants on single-walled carbon nanotubes (SWCNTs). On comparing dispersions of smaller-diameter SWCNTs prepared by using cobalt-molybdenum catalysis (CoMoCAT) with the larger-diameter SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco), we find that the CoMoCAT-perylene surfactant dispersions are characterized by more negative zeta potentials, and higher anhydrous specific volumes (the latter determined from the sedimentation coefficients by analytical ultracentrifugation), which indicates an increased packing density of the perylene surfactants on nanotubes of smaller diameter. This conclusion is further supported by the subsequent replacement of the perylene derivatives from the nanotube sidewall by sodium dodecyl benzene sulfonate (SDBS), which first occurs on the larger-diameter nanotubes. The enhanced adsorption affinity of the perylene surfactants towards smaller-diameter SWCNTs can be understood in terms of a change in the supramolecular arrangement of the perylene derivatives on the scaffold of the SWCNTs. These findings represent a significant step forward in understanding the noncovalent interaction of π-surfactants with carbon nanotubes, which will enable the design of novel surfactants with enhanced selectivity for certain nanotube species.     

On the applicability of cluster models to study the chemical reactivity of carbon nanotubes

We have performed a comparative study on the reactivity of metallic and semiconducting nanotubes using infinite and finite models. Infinite models were created using periodic boundary conditions while finite ones were constructed by means of hydrogen terminated nanotubes sections. Cluster models systematically underestimate the reactivity of metallic single wall carbon nanotube (SWCNT)s. We have confirmed that metallic nanotubes are more reactive than semiconducting species, in disagreement with previous works. The differences can be attributed to the presence of an instability in the singlet ground state of the wavefunction corresponding to semiconducting nanotubes clusters. When lower electronic states of the pristine cluster are considered, semiconducting nanotubes become less reactive as compared with metallic SWCNTs. Particularly, if an antiferromagnetic solution is considered for the semiconducting (10,0) SWCNT cluster, it becomes less reactive than the (5,5) SWCNT, as observed for infinite models. Because semiconducting nanotubes are less reactive than metallic counterparts, their reaction energies converge faster to the values observed for graphene. For a 1.6-nm diameter semiconducting nanotube, the addition energy is comparable with graphene. Thus, semiconducting nanotubes with diameters larger than 1.6 nm are going to be as reactive as graphene and the effects of curvature will be unimportant.     

Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant

The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling.     

Molecular perspective on diazonium adsorption for controllable functionalization of single-walled carbon nanotubes in aqueous surfactant solutions

Functionalization of single-walled carbon nanotubes (SWCNTs) using diazonium salts allows modification of their optical and electronic properties for a variety of applications, ranging from drug-delivery vehicles to molecular sensors. However, control of the functionalization process remains a challenge, requiring molecular-level understanding of the adsorption of diazonium ions onto heterogeneous, charge-mobile SWCNT surfaces, which are typically decorated with surfactants. In this paper, we combine molecular dynamics (MD) simulations, experiments, and equilibrium reaction modeling to understand and model the extent of diazonium functionalization of SWCNTs coated with various surfactants (sodium cholate, sodium dodecyl sulfate, and cetyl trimethylammonium bromide). We show that the free energy of diazonium adsorption, determined using simulations, can be used to rank surfactants in terms of the extent of functionalization attained following their adsorption on the nanotube surface. The difference in binding affinities between linear and rigid surfactants is attributed to the synergistic binding of the diazonium ion to the local "hot/cold spots" formed by the charged surfactant heads. A combined simulation-modeling framework is developed to provide guidance for controlling the various sensitive experimental conditions needed to achieve the desired extent of SWCNT functionalization.     

Nerve agents interacting with single wall carbon nanotubes: Density functional calculations

First-principles calculations based on density functional theory (DFT) method are used to investigate the adsorption properties of nerve agent DMMP on typical zigzag (semiconducting) and armchair (metallic) single wall carbon nanotubes (SWCNTs). The adsorption energies for DMMP molecule on different adsorption sites on SWCNTs are obtained. The results indicate that DMMP is weakly bound to the outer surface of both the considered SWCNTs and the obtained adsorption energy values and binding distances are typical for the physisorption. We find that DMMP adsorptive capability of metallic CNTs is about twofold that of semiconducting one. The adsorption of DMMP on the higher chiral angle nanotubes was also investigated and the results indicate that nanotube’s chirality increases the adsorption capability of the tube but however the adsorption characteristic is typical for the physisorption. Furthermore, co-adsorption of two DMMP molecules on the SWCNTs as a single-layer/bi-layer of adsorbed molecules as well as the adsorption of one DMMP molecule on the CNT bundles consisting of three SWCNTs has also been examined. The obtained results reveal that for both the considered systems the binding energy was increased for the DMMP adsorption but it’s still typical for the physisorption, consistent with the recent experimental result. The study of the electronic structures and charge analysis indicate that no significant hybridization between the respective orbital takes place and the small interaction obtained quantitatively in terms of binding energies.     

Density functional and molecular docking studies towards investigating the role of single-wall carbon nanotubes as nanocarrier for loading and delivery of pyrazinamide antitubercular drug onto pncA protein

The potential biomedical application of carbon nanotubes (CNTs) pertinent to drug delivery is highly manifested considering the remarkable electronic and structural properties exhibited by CNT. To simulate the interaction of nanomaterials with biomolecular systems, we have performed density functional calculations on the interaction of pyrazinamide (PZA) drug with functionalized single-wall CNT (fSWCNT) as a function of nanotube chirality and length using two different approaches of covalent functionalization, followed by docking simulation of fSWCNT with pncA protein. The functionalization of pristine SWCNT facilitates in enhancing the reactivity of the nanotubes and formation of such type of nanotube-drug conjugate is thermodynamically feasible. Docking studies predict the plausible binding mechanism and suggests that PZA loaded fSWCNT facilitates in the target specific binding of PZA within the protein following a lock and key mechanism. Interestingly, no major structural deformation in the protein was observed after binding with CNT and the interaction between ligand and receptor is mainly hydrophobic in nature. We anticipate that these findings may provide new routes towards the drug delivery mechanism by CNTs with long term practical implications in tuberculosis chemotherapy.     

Covalent Functionalization of Pristine and Ga-Doped Boron Phosphide Nanotubes with Imidazole

Abstract

Density functional theory (DFT) calculations at the B3LYP/6–31G* level were performed to investigate covalent functionalization of imidazole on pristine (in gas and H₂O phases) and Ga-doped BPNT models in terms of energetic, geometric, and electronic properties. The results show that imidazole, as a functional group, prefers to be adsorbed via its nitrogen atom on the pristine, Ga_B, and Ga_P nanotube models. The adsorption energy of imidazole on the (6,0) zigzag BPNT in gas and solvent phases is ?0.76 and ?1.11 eV, respectively, and about 0.38 and 0.43 electron are transferred from the imidazole to nanotube in the phases. The presence of a polar solvent increases the electron donor of imidazole molecule. The results show that Ga doping can significantly enhance the adsorption energy of imidazole on the nanotube models to about 95%.

Moreover, the imidazole adsorption on the pristine and Ga-doped BPNT models has not significant changes in the energy gap of the nanotube models and it is slightly changed after covalent functionalization process. This study may provide new insight to the development of functionalized boron phosphide nanotubes for generation of the new hybrid compounds especially in drug delivery systems for virtual applications.     

硼氮掺杂的碳纳米管对硫化氢气敏性能的理论研究

应用密度泛函理论研究了纯(8, 0)单壁碳纳米管(SWCNT)和B原子、N原子以及BN原子对掺杂的(8, 0) SWCNTs对硫化氢气体分子的传感性质. 计算结果表明, 与纯碳纳米管相比, B原子掺杂的SWCNT显示了对H₂S分子的敏感性, 其几何结构和电子性质在吸附H₂S分子后发生了显著变化; 而N原子和BN原子对的掺杂没有改善SWCNT对H₂S分子的吸附性能, 因此我们建议B原子掺杂的SWCNT作为检测H₂S分子的新型气相传感器.     

Chemical reaction of nitric oxides with the 5-1DB defect of the single-walled carbon nanotube

In this work, we applied a two-layered ONIOM (B3LYP/6-31G(d):UFF) method to study the reaction of nitric oxides with a 5-1DB defect on the sidewall of the single-walled carbon nanotube (SWCNT). We have chosen a suitable ONIOM model for the calculation of the SWCNT based on the analyses of the frontier molecular orbitals, local density of states, and natural bond orbitals. Our calculations clearly indicate that the 5-1DB defect is the chemically active center of the SWCNT. In the reaction of nitric oxides with the defected SWCNT, the 5-1DB defect site can capture a nitrogen atom from nitric oxides, yielding the N-substitutionally doped SWCNT. We have explored the reaction pathway in detail. Our work verifies the chemical reactivity of the 5-1DB defects of the SWCNTs, indicates that the 5-1DB defect is a possible site for the functionalization of the SWCNTs, and demonstrates a possible way to fabricate position controllable substitutionally doped SWCNTs with a low doping concentration under mild conditions via some simple chemical reactions.     

Functionalization of Single‐Walled Carbon Nanotubes

Through chemical functionalization of single‐walled carbon nanotubes, the prerequisites for possible applications of such nanostructures are established. The derivatized tubes differ from the crude materials in their good solubility, which enables both a more extensive characterization and subsequent chemical reactivity. Current derivatization methods include defect and covalent sidewall functionalization, as well as noncovalent exo‐ and endohedral functionalization. In this way, for example, a range of nanotubes can be prepared: with sidewall substituents, wrapped with polymers, or with guest molecules included. The current state of the literature is presented in this Minireview.     

Dielectrophoretic manipulation of fluorescing single-walled carbon nanotubes

We investigate the behavior of fluorescing single-walled carbon nanotubes (SWCNTs) under dielectrophoretic conditions and demonstrate their collection with fluorescence microscopy. SWCNTs are dispersed in water with the aid of a nonionic surfactant, Triton X-100, and labeled through noncovalent binding with the dye 3,3'-dihexyloxacarbocyanine iodide (diOC(6)). The chromophore's affinity to the SWCNTs is due to pi-stacking interactions. Carbon nanotube (CNT) localization is clearly identified on the fluorescence images, showing that the nanotubes concentrate between the electrodes and align along the electric field lines.     

Amine basicity (pKb) controls the analyte binding energy on single walled carbon nanotube electronic sensor arrays

A wide range of analytes adsorb irreversibly to the surfaces of single walled carbon nanotube electronic networks typically used as sensors or thin-film transistors, although to date, the mechanism is not understood. Using thionyl chloride as a model electron-withdrawing adsorbate, we show that reversible adsorption sites can be created on the nanotube array via noncovalent functionalization with amine-terminated molecules of pKa < 8.8. A nanotube network comprising single, largely unbundled nanotubes, near the electronic percolation threshold is required for the effective conversion to a reversibly binding array. By examining 11 types of amine-containing molecules, we show that analyte adsorption is largely affected by the basicity (pKb) of surface groups. The binding energy of the analyte is apparently reduced by its adsorption on the surface chemical groups instead of directly on the SWNT array itself. This mediated adsorption mechanism is supported by X-ray photoelectron spectroscopy (XPS) and molecular potential calculations. Reversible detection with no active regeneration at the parts-per-trillion level is demonstrated for the first time by creating a higher adsorption site density with a polymer amine, such as polyethyleneimine (PEI). Last, we demonstrate that this transition to reversibility upon surface functionalization is a general phenomenon.     

Carbon nanotube poroshell silica as a novel stationary phase for fast HPLC analysis of monoclonal antibodies

A new carbon nanotube porous silica poroshell stationary phase was developed. The chromatographic support was coated with ultrashort single-wall carbon nanotubes (SWCNTs) in a noncovalent way. It was demonstrated that the porous amino silica surface of the 300 NH₂ poroshell column stabilized with 1-methyl-2-pyrrolidinone efficiently and stably adsorbed SWCNTs onto the chromatographic support. It was shown that this novel poroshell carbon nanotube (CNT) stationary phase was very useful for the HPLC separation of a series of monoclonal antibodies (mAbs) in a short analysis time (<3 min). The high-performance liquid chromatography (HPLC) method was validated and was successfully tested for the fast quantitative and qualitative control of chemotherapeutic bags fabricated in a hospital pharmacy.     

Efficient Chemical Modification of Carbon Nanotubes with Metallacarboranes

As‐produced single‐walled carbon nanotubes (SWCNTs) tend to aggregate in bundles due to π–π interactions. Several approaches are nowadays available to debundle, at least partially, the nanotubes through surface modification by both covalent and noncovalent approaches. Herein, we explore different strategies to afford an efficient covalent functionalization of SWCNTs with cobaltabisdicarbollide anions. Aberration‐corrected HRTEM analysis reveals the presence of metallacarboranes along the walls of the SWCNTs. This new family of materials presents an outstanding water dispersibility that facilitates its processability for potential applications.     

Modified SWCNTs with Amphoteric Redox and Solubilizing Properties

A complementary double‐covalent functionalization of single‐wall carbon nanotubes (SWCNTs) that involves both solubilizing ionic liquids and electroactive moieties is reported. Our strategy is a simple and efficient methodology based on the stepwise functionalization of the nanotube surface with two different organic moieties. In a first instance, oxidized SWCNTs are amidated with ionic liquid precursors, and further treated with n‐butyl bromide to afford SWCNTs functionalized with 1‐butylimidazolium bromide. This approach allows tuneable polarity induced by anion exchange, which has an effect on the relative solubility of the modified SWCNTs in water. Subsequently, a 1,3‐dipolar cycloaddition reaction was performed to introduce the electron‐acceptor 11,11,12,12‐tetracyano‐9,10‐anthra‐para‐quinodimethane (TCAQ) unit on the SWCNTs. Furthermore, to evaluate the influence of the functional group position, the TCAQ electroactive molecule was anchored through an esterification reaction onto previously oxidized SWCNTs, followed by the Tour reaction to introduce the ionic liquid functions. IR and Raman spectroscopies, thermogravimetric analysis (TGA), UV/Vis/NIR spectroscopy, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS) were employed and clearly confirmed the double‐covalent functionalization of the SWCNTs.     

Ab initio study on the noncovalent adsorption of camptothecin anticancer drug onto graphene, defect modified graphene and graphene oxide

The application of graphene and related nanomaterials like boron nitride (BN) nanosheets, BN-graphene hybrid nanomaterials, and graphene oxide (GO) for adsorption of anticancer chemotherapeutic camptothecin (CPT) along with the effect on electronic properties prior to functionalization and after functionalization has been reported using density functional theory (DFT) calculations. The inclusion of dispersion correction to DFT is instrumental in accounting for van der Waals π–π stacking between CPT and the nanomaterial. The adsorption of CPT exhibits significant strain within the nanosheets and noncovalent adsorption of CPT is thermodynamically favoured onto the nanosheets. In case of GO, surface incorporation of functional groups result in significant crumpling along the basal plane and the interaction is basically mediated by H-bonding rather than π–π stacking. Docking studies predict the plausible binding of CPT, CPT functionalized graphene and GO with topoisomerase I (top 1) signifying that CPT interacts through π stacking with AT and GC base pairs of DNA and in presence of nano support, DNA bases preferentially gets bound to the basal plane of graphene and GO rather than the edges. At a theoretical level of understanding, our studies point out the noncovalent interaction of CPT with graphene based nanomaterials and GO for loading and delivery of anticancer chemotherapeutic along with active binding to Top1 protein.     

Controlling the Degree of Functionalization: In-Depth Quantification and Side-Product Analysis of Diazonium Chemistry on SWCNTs

We present an in-depth qualitative and quantitative analysis of a reaction between 4-iodobenzenediazonium tetrafluoroborate and single-walled carbon nanotubes (SWCNTs) via thermogravimetric analysis coupled with mass spectrometry (TG-MS) or a gas chromatography and mass spectrometry (TG-GC-MS) as well as Raman spectroscopy. We propose a method for precise determination of the degree of functionalization and quantification of physisorbed aromates, detaching around their boiling point, alongside covalently bonded ones (cleavage over 200 °C). While the presence of some side products like phenol- or biphenyl species could be excluded, residual surfactant and minor amounts of benzene could be identified. A concentration-dependent experiment shows that the degree of functionalization increases with the logarithm of the concentration of applied diazonium salt, which can be exploited to precisely adjust the amount of aryl addends on the nanotube sidewall, up to 1 moiety per 100 carbon atoms.