螺噁嗪类光致变色化合物的合成研究进展

光致变色螺噁嗪;双光致变色螺噁嗪;螺噁嗪聚合物;合成;微波合成     

螺噁嗪化合物的合成及其光致变色性能的研究

合成了3种新型的螺噁嗪化合物,并通过IR,MS,1H NMR对其结构进行了表征。研究了1位和9’位上取代基对螺噁嗪光致变色性能的影响;不同溶剂对螺噁嗪最大吸收波长的影响;对螺噁嗪的热褪色速率进行了动力学的研究。结果表明,当螺噁嗪1位的取代基为柔性结构,9’位连接能形成更稳定共轭体系的取代基时有利于开环体热稳定性的提高。     

螺噁嗪光致变色反应机理研究进展

20世纪80年代中期以来, 关于螺噁嗪在光致变色过程中的光化学和光物理现象的研究非常活跃. 综述了近20年来对溶液中的螺噁嗪、晶体螺噁嗪以及固体介质中的螺噁嗪的光致变色机理研究结果, 同时介绍了实验研究方法和理论研究方法在螺噁嗪光致变色过程研究中的应用, 分析了取代基对光致变色性质的影响. 阐述了机理研究对新型螺噁嗪设计合成的重要指导意义.     

螺噁嗪光致变色反应机理研究进展

20世纪80年代中期以来, 关于螺噁嗪在光致变色过程中的光化学和光物理现象的研究非常活跃. 综述了近20年来对溶液中的螺噁嗪、晶体螺噁嗪以及固体介质中的螺噁嗪的光致变色机理研究结果, 同时介绍了实验研究方法和理论研究方法在螺噁嗪光致变色过程研究中的应用, 分析了取代基对光致变色性质的影响. 阐述了机理研究对新型螺噁嗪设计合成的重要指导意义.     

超声波辐射下光致变色螺噁嗪类化合物的快速合成

在超声波辐射条件下,以Fischer碱、1-亚硝基-2,7-二羟基萘为原料,无水乙醇为溶剂快速合成了三个螺嗪类光致变色化合物,通过1 H NMR、IR对目标产物的结构进行了表征,讨论了超声辐射时间对合成产率的影响,利用超声波法合成螺噁嗪类光致变色化合物反应速率快、产率有所提高.     

8′-取代吲哚螺噁嗪光致变色化合物的合成及光谱性质

通过在螺噁嗪结构中的萘环8′-位上引入不同的取代基,合成了三种螺噁嗪光致变色化合物;对三种产物的光谱性质进行了对比研究,并考察了其光照褪色速率和抗疲劳性能.结果表明:改变8′-位取代基,合成化合物的闭环吸收峰的位置几乎不受影响,但开环吸收峰发生显著变化,随着取代基极性增加明显红移.增加溶剂的极性,可使同一化合物的开环吸收峰红移.     

螺噁嗪化合物在丙烯酸聚氨酯清漆膜中的光致变色性能

制备了含有螺噁嗪(SO)化合物的紫外光固化丙烯酸聚氨酯清漆(UV-PUA)膜, 研究了SO在该清漆中的光致变色性能, 并与其在聚甲基丙烯酸甲酯(PMMA)中的光致变色性能进行了比较. 结果发现, 紫外光固化螺噁嗪丙烯酸聚氨酯清漆(UV-SO-PUA)膜在紫外光固化过程中逐渐由无色变为蓝色和紫色, 撤去紫外光源, 漆膜退色至粉色, 且固化后的漆膜在粉色和紫色之间可逆变化; 而SO-PMMA膜在无色和蓝色之间可逆变化. 紫外光激发的UV-SO-PUA膜的紫外-可见吸收光谱可见光区出现了明显的双重吸收峰(520和600 nm), 而在PMMA中仅出现单峰. SO开环体在UV-PUA 中室温稳定性优于其在ＰＭＭＡ中的稳定性. SO在UV-PUA膜中的抗疲劳性能与其在PMMA中相比显著提高, 紫外光照射16 h, UV-SO-PUA漆膜未出现疲劳现象. SO在UV-PUA膜中表现出了优良的光致变色行为.     

含席夫碱基的螺噁嗪类光致变色化合物的合成及性质

设计合成了一系列含席夫碱基的螺噁嗪双功能光致变色材料4a~4d. 通过¹H NMR, ¹³C NMR, IR和HRMS对其结构进行了表征. 新化合物在几种有机溶剂中均表现出了良好的光致变色性. 研究了化合物在几种高分子膜中的光致变色性. 比较了化合物4b的开环体在两种不同溶剂, 即甲醇和二甲亚砜, 以及3种高分子介质, 即聚甲基丙烯酸甲酯(PMMA)、聚乙烯醇缩丁醛(PVB)和聚乙烯醇(PVA)中的消色速率. 研究了化合物在甲醇、二甲亚砜、PMMA及PVB中的消色过程动力学, 根据化合物在溶液中和高分子介质中开环体消色过程的差别, 推测了存在两种动力学解释的原因. 研究结果显示, 化合物4d在PMMA膜中的耐疲劳度良好.     

螺噁嗪三苯基膦盐的合成及酸敏光致变色性质

合成了一种水溶性螺噁嗪三苯基膦盐化合物1,并由1HNMR、MS和元素分析表征确认了结构。UV-Vis吸收光谱研究表明,该化合物在有机溶剂中表现出与其它螺噁嗪类化合物类似的光致变色性质,并在含水乙醇溶液中表现出对pH敏感的光照显色效应,即:依赖于pH光诱导开环体呈现出两种结构稳定态,调节pH可实现这两种结构稳定态的相互转换。     

新型含二茂铁基螺噁嗪类光致变色化合物的合成及其光谱研究

合成了一种新的含二茂铁基螺噁嗪类光致变色化合物，并研究了其吸收光谱和荧光光谱。发现在分子内引入二茂铁基团提高了热不可逆性，发生光致变色反应前后化合物结构的不同对其荧光特性影响很大。     

Thermal stability of the ­spironaphthoxazine colored form in ­polymeric siloxanes

In order to improve the thermal stability of colored merocyanine formed by the photochromic reaction of spironaphthoxazine, the spiro compound was incorporated in polymeric siloxanes. They are liquid poly(methylphenylsiloxane) and solid methyl‐ or phenyl‐siloxane resins prepared by the hydrolysis and condensation reactions of the corresponding di‐ or tri‐ethoxysilane. To the polymers the spirooxazine moiety is­bonded covalently. Higher stability of the colored form was not observed in the liquid polysiloxane, but in the solid resins. The phenyl substituent in the resin is more effective than the methyl one for stabilization, suggesting that the bulky substituent in the vicinity of the spirooxazine moiety is important as well as stiff polymer matrices. The phenylsiloxane resin with the spirooxazine moiety was enclosed in rigid sol–gel silica, but a further improvement of the thermal stability was not observed. Copyright © 2002 John Wiley & Sons, Ltd.     

水溶性聚合物热稳定性研究进展

水溶性聚合物广泛应用于石油开采、水处理、造纸、印染以及医药等领域,该类聚合物热稳定性问题直接关系到其在高温环境下的应用性能,因此具有重要的研究意义和应用价值。本文选取了几类具有代表性的水溶性聚合物,详细综述了其热稳定性的研究进展,重点分析了不同类型的水溶性聚合物的热降解机理,并探讨了分子结构和外添加剂对热稳定性能的影响,最后对其发展前景进行了展望。     

Effect of Heat Treatment and Additives on the Photochromic and Mechanical Properties of Sol-Gel Derived Photochromic Coatings Containing Spirooxazine

The experimental results on the photochromic and mechanical properties of coatings containing 1,3-dihydro-1,3,3-trimethylspiro[2H-indole-2,3′-(3H)-naphth(2,1-b)(1,4) oxazine] (SO) derived from 3-glycidyl-oxypropyltrimethoxysilane (GPTMS), bisphenolA (BPA) and 1-methylimidazole (MI) by sol-gel processing are presented. It is shown that heat treatment temperature is a conflicting factor to the photochromic intensity (ΔA ₀), photostability and abrasion resistance of the photochromic coatings. With increasing densification temperature the matrix rigidity increases leading to a decrease of ΔA ₀ and at the same time an enhancement of both abrasion resistance and photostability, the optimum heat treatment temperature is 110°C under our experimental conditions. By the use of certain additives, e.g., fluorosilanes (FAS), not only ΔA ₀ but also the photostability and the abrasion resistance of the photochromic coatings have been further improved.     

取代基对螺噁嗪类化合物光致变色性能影响的探究

本文合成了 4种螺噁嗪类化合物,并通过FTIR、1H NMR、ESI-MS对其结构进行了表征.研究了吲哚环上氮原子和噁嗪环9'位不同的取代基及溶剂化效应对其光致变色性能的影响.结果表明,吲哚环的氮原子引入体积较大的基团对螺噁嗪最大吸收波长无明显影响,然而有利于开环体的稳定性,且溴原子的引入会影响螺噁嗪的光响应性;噁嗪环...     

The effect of substituents and polymer media on photochromism kinetics of indolinospironaphthoxazine

The effect of substituents in indoline moiety and polymer media on photochromism and thermal decay processes of spirooxazine (ASP) was investigated. The thermal decoloration rate was decreased with increasing steric hindrance of substituents in l-position of indoline moiety. The stability of the colored forms was improved when the hydrogen in the 5-position of indoline moiety was replaced with electron-donating groups and was decreased when substituted by electron-withdrawing groups. In addition, the stability of the colored forms was related to properties of polymer media. The thermal decay rate decreased with an increase in the polarity and rigidity of polymer media. The themal decay kinetics of the colored forms obeyed biexponential decay law.     

几种取代螺吲哚啉萘并噁嗪的合成

螺吲哚啉-2,3'-[3H]萘并[2,1-b][1,4]噁嗪(简称螺噁嗪)是一类耐光疲劳性能优于螺吡喃的光致变色物^[1]。Fox以及Ono先期合成了这类化合物^[2],最近Pottier等考察了取代基对性能的影响^[3,4]。但所涉及的取代基(CH₃、CH₃O、Cl、NO₂)多在母体结构中吲哚环的5( 6)位,且N-烷基碳链较短,蔡环上有取代基的情形较少见^[5]。     

Thermal Behaviour of Pharmacologically Active Lithium Compounds

The thermal decompositions of a series of simple lithium compounds (carbonate, sulfate, acetate, citrates, aspartates and glutamates) currently used in the treatment of manic-depressive psychosis and related disorders were investigated by means of TG and DTA measurements in oxygen atmosphere. Pyrolysis residues were characterized by infrared spectroscopy. The stabilities of the hydrates and intermediate phases generated during the degradation processes are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal Stability of Silica-polyorganosiloxane Systems

Thermal stability of silica-polyvinylsiloxane systems with different ratio of hydrophilic and hydrophobic components and its forms with adsorbed dyes were studied using thermochemical method. It was shown that the maximum of endoeffect relating to dehydroxylation of sorbents surface is observed at 325°C. The maximum temperature of the second endoeffect depends on the organosilica sorbents composition and increases with a decrease of hydrophilic and hydrophobic sites ratio. It was found that the values of the summary thermal effect lowers upon the raise of the quantity of silanol groups. It was shown that thermal stability of composition materials is higher in comparison with initial organosilica sorbents. This revised version was published online in August 2006 with corrections to the Cover Date.