A modified moiré interferometer for three-dimensional displacement measurement

This paper presents a new optical interferometric system, MMI-T/G, composed of a modified four-beam moire interferometer and a Twyman/Green interferometer. The MMI-T/G system can measure threedimensional displacement fringe patterns with a single loading on the specimen, and the in-plane and out-of-plane displacement fields can be measured independently and defined clearly. The optical setup has the advantages of structural novelty, flexibility, and high fringe contrast. Moreover, the in-plane displacement sensitivity is twice of that of the normal moire interferometer. The measuring techniques to obtain the fringe patterns and displacement fields using the MMI-T/G system axe described. The experimental results of thermal displacement of an electronic device are shown.     

Simultaneous measurement with one-capture of the two in-plane components of displacement by electronic speckle pattern interferometry

We present the simultaneous measurement of the two in-plane displacement components by electronic speckle pattern interferometry with three object beams and without an in-line reference beam. Three interference fringe patterns, corresponding to three different sensitivity vectors, are recorded in a single interferogram and separated by means of the Fourier transform method. Then, two interference fringe patterns are selected to obtain the in-plane displacement components.     

The governing equations of Moiré interferometry II. Gratings at ±45° to the measurement axes

The effects of tilting of the grating plane on moiré interferometric fringe patterns are studied using the method of Livnat and Post (Experimental Mechanics, 25(4) (1985) 6–360). Tilting may result either from rigid-body rotations or from out-of-plane displacement gradients. Tilting may introduce a significant error if it is assumed that the fringes represent contours of in-plane displacement, particularly if the in-plane deformation is small compared with the out-of-plane displacement gradient. Knowledge of the surface slope appears to be sufficient to correct the error. It is also shown that the fringe patterns do not capture the added displacement caused by rigid-body rotations exactly. The implications of these effects are briefly discussed for an experiment measuring the deformation at the tip of a crack in a ductile steel, in which the out-of-plane displacement gradients are relatively large.     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

A comparison of phase shifting and fourier methods in the analysis of discontinuous fringe patterns

Phase Shifting Interferometry is a highly accurate data acquisition technique that efficiently utilizes several frames of information for each measurement. In this work, the advantages of phase shifting have been applied to a conventional moiré interferometer, yielding a system capable of recording phase shifted fringe patterns for both in-plane displacement components. Using this method, the phase of a wavefront of interest can be determined at each detector location, so that the resolution of the phase measurements is limited primarily by the detector discrimination and geometry. Unlike traditional Fourier fringe analysis, the noise rejection of phase shift processing algorithms does not degrade image fidelity in the presence of edges and discontinuities. A general discussion of both the phase shifting technique and the Fourier fringe analysis method is included to provide insight into the problems of processing discontinuous fringe patterns.     

Direct measurement of curvature and twist of plates using digital shearography

A method of determining the second-order derivatives of displacement using digital shearing speckle interferometry is presented in this paper. A phase-shifting technique is incorporated and demonstrated to yield good quality fringe patterns that depict either the second-order derivative separately or a combination of first- and second-order derivatives. The optical set-up of this method is similar to that of conventional phase-shifting shearography, thus enjoying a simple and practical configuration. Qualitative comparison shows acceptable agreement of the generated fringe patterns with theoretical results.     

Two improved methods of surface-displacement measurements by holographic interferometry

This paper describes two new methods for measuring surface-displacements. The first method is an improvement of Ennos' scheme in that multiple object beams are used instead of multiple hologram plates. This arrangement enables the three fringe patterns required for calculating displacement components to be viewed from the same direction, i.e., normal view. Thus the necessity of laborious fringe reprojection is eliminated. The second method involves making three holograms, one situated on each of the three coordinate axes assigned to the surface. Each hologram picks up one component of displacement. Hence no separation of displacement components is required. An experimental demonstration is presented which utilizes the first technique and checks with theoretical predictions.     

影栅云纹法中的离面位移与斜率耦合条纹的光力学分析

基于传统的概念,影栅云纹法只能实时获得表征物体大离面位移(深度)的条纹。若要获得反映斜率的条纹,则只有用镜面试件通过反射云纹法或其它的光测法来获得。在研究中发现,在一定的条件下,用影栅云纹法可以获得离面位移与斜率的耦合条纹图。这个新发现打破了已有的传统概念。实验证实了简单实用的影栅云纹法不但能获得物体大变形时的离面位移,而且也可以获得与之对应的斜率条纹。给出了典型的可实时获得的耦合条纹图,并对其基本原理、计算方法和实验技术进行了论述。     

基于液晶显示投影技术的数字影栅云纹相移实现方法

影栅云纹是物体离面变形和表面形貌测量常用的一种比较简单的方法,用单纯的影栅云纹法即便在最好的光学系统配置情况下测量精度也只有1~100μm左右,在影栅云纹测试方法中引进相移技术是提高测量精度的主要手段。采用液晶投影仪和数字图像处理技术实现数字影栅云纹测量的准确数字相移,避免了在影栅云纹法中使用结构比较复杂或特制的相移机构。由计算机产生相移条纹图经液晶显示投影,应用实时图像灰度算术相减技术得到数字相移影栅云纹条纹图。该方法具有“基准栅”的栅距和相移步长实时可调,配置高速图像采集系统和图像后处理软件,可将相移技术引入动态测量中,从而提高动态测量的精度的优点。最后的悬臂梁实验结果证实了该方法的有效性。     

用于多参数同时测量的散斑干涉仪

本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.     

Measurement of dynamic crack tip displacement field by speckle photography and interferometry

Speckle interferometry has been used to measure the transient displacement field around a crack due to stress wave loading. Double exposure interferograms are recorded with a pulsed ruby laser, and correlation fringes formed by spatial filtering of the developed film. A new technique is presented for reducing the noise level in spatially filtered speckle interferograms. Independent fringe patterns, obtained from one interferogram but with the filtering aperture sampling different regions of the Fourier transform plane, are digitised by a CCD camera and combined numerically. It is demonstrated that accurate analysis of fringe patterns by the Fourier transform method can be carried out, even if no carrier fringes are present. The measurements are compared with those obtained by speckle photography. Least-squares fitting of the theoretical displacement field is used to calculate the stress intensity factor at the crack tip as a function of time.     

Revealing load hysteresis based on electronic speckle pattern interferometry and physical mesomechanics

A method to reveal load hysteresis of metal specimens is described. In this method, a low-level tensile-load is applied to a previously loaded specimen, and the resultant displacement field is visualized as a two-dimensional, whole-field image. An optical interferometric technique known as the Electronic Speckle Pattern Interferometry is used for the visualization. The interferometric fringe pattern of the visualized displacement field is analyzed for determination of the degree of deformation from the previous load. A series of experiments have been conducted with aluminum plate specimens for the demonstration of this method. The specimens are preloaded to three stress levels: (A) lower than the yield stress, (B) middle of the plastic regime, and (C) close to the maximum stress. After released from the preload, the specimens are reloaded for fringe pattern analysis. It has been found that the fringe patterns clearly differentiate the three preloading conditions, and that by varying the reload stress level it is possible to reveal the preload stress quantitatively. All experimental observations are explained by deformation dynamics based on physical mesomechanics.     

Multi-directional lateral shearing interferometer based on rotatable prism pairs

The common camera lens usually includes the spherical glass/plastic lens and aspheric glass/plastic lens. However, spherical/aspheric shape measurement is still a key problem in the process of optical lens fabrication. At present, the in-process measurement of spherical/aspheric shape is conducted mainly by the probe-contacting method. But after a long time, its probe could be scratched severely and cause some big errors. Laser shearing interferometry is a good substitute to some degree. Nevertheless, it is not convenient for general shearing interferometer to carry out the in-process measurement because it is only suitable for certain kind of spherical/aspheric with respect to aperture or asperity. Here a new lateral shearing interferometer is proposed to solve the described problems. It is based on two Jamin plates and rotatable prism pairs which are used not only for shearing displacement and direction, but also for fringe period and tilt degree, in order to meet requirements of various spherical/aspheric shapes or asperities. The new interferometer features a simple optical structure and two symmetric light paths, which makes its system with minimal error. The relation between shearing displacement, fringe period and prism angle of rotation is given in this paper. And the error source is primarily from the manufacture errors of prisms and plates. The final experiments show that one can achieve good-quality fringe patterns according to the requirement of measurement, concerning the shearing direction, shearing displacement, fringe period, tilt degree, etc.     

Influence of the volume speckle on fiber specklegram sensors based on four-wave mixing in photorefractive materials

In this work, the dependence on the speckle size in the performance of a micro displacement sensor based on fiber specklegrams stored in a photorefractive BSO (Bi₁₂SiO₂₀) crystal is experimentally demonstrated. In our experimental setup, a plastic optical fiber (POF) was used to generate a subjective speckle pattern which was recorded in the crystal by using a four-wave mixing arrangement in transmission geometry. The speckle size was controlled by modifying the diameter of a pupil aperture adjacent to a lens producing the image of the speckle. The signal speckle beam was mixed into the crystal with two counter propagating pump beams to generate a fourth beam which is proportional to the conjugate of the original speckle beam. Real time fringe patterns were obtained at the output of the system by producing micro displacements of the fiber output end. Increases of the phase conjugation reflectivity and the visibility of the fringe patterns were appreciated when the speckle length was increased by decreasing the pupil aperture diameter. This behavior allowed recovering the autocorrelation functions of fringe patterns associated to micro displacements that initially led to decorrelation, and therefore, to improve the dynamic range of the metrological system. Until the best of our knowledge this is the first report about the influence of the speckle size on fiber specklegrams sensors recorded on photorefractive materials by four-wave mixing.     

An improved stair phase encoding method for absolute phase retrieval

An improved phase unwrapping method is proposed to reduce the projection fringes in three-dimensional (3D) surface measurement. Color fringe patterns are generated by encoding with sinusoidal fringe and stair phase fringe patterns in red and blue channels. These color fringe patterns are projected onto the tested objects and then captured by a color CCD camera. The recorded fringe patterns are separated into their RGB components. Two groups of four-step phase-shifting fringe patterns are obtained. One group of the stripes are four sinusoidal patterns, which are used to determine the wrapped phase. The other group of stripes are four sinusoidal patterns with the codeword embedded into stair phase, whose stair changes are perfectly aligned with the 2π discontinuities of sinusoidal fringe phase, which are used to determine the fringe order for the phase unwrapping. The experimental results are analyzed and compared with those of the method in Zheng and Da (2012. Opt Express 20(22):24139–24150). The results show that the proposed method needs only four fringe patterns while having less error. It can effectively reduce the number of projection fringes and improve the measuring speed.     

横向位移双曝光散斑图维纳谱的信息分布

讨论了横向位移双曝光散斑图维纳谱的信息分布，并由此导出杨氏纹图的一般表达式。讨论了条纹可见度与应变，面内转动，照明光束直径与条纹图图空间坐标的关系，指出了在条纹可见度影响下最大可见条纹数目。还讨论了散斑衬比与衍射晕的关系。     

High-precision technique for in-situ testing of the PZT scanner based on fringe analysis

A technique based on fringe analysis is presented for the in-situ testing of the PZT scanner, including the end rotation analysis and displacement measurement. With the interferograms acquired in the Twyman-Green interferometer, the testing can be carried out in real time. The end rotation of the PZT scanner and its spatial displacement deviation are analyzed by processing the fringe rotation and interval changes; displacement of the PZT scanner is determined by fringe shift according to the algorithm of template-matching, from which the relation between the driving voltage and displacement is measured to calibrate the nonlinearity of the PZT scanner. It is shown by computer simulation and experiments that the proposed technique for in-situ testing of the PZT scanner takes a short time, and achieves precise displacement measurement as well as the end rotation angle and displacement deviation measurement. The proposed method has high efficiency and precision, and is of great practicality for in-situ calibration of the PZT scanner.     

Automated optical analysis of young's fringes— optical autocorrelation

Extraction of displacement or velocity data from laser speckle photography or particle image velocimetry transparencies requires measurement of the spacing and orientation of several thousand Young's fringe patterns. In contrast with classical interferometry, fringes formed in this way have poor visibility and it is generally desirable to compute the two-dimensional Fourier transform in order to extract the fringe frequency. The large amount of data produced makes digital acquisition and image processing computationally intensive and time consuming. This paper introduces an automated processor which utilises a photorefractive crystal of bismuth silicon oxide to perform this analysis in a fast and cost-effective manner.     

Frozen strain moiré used in the analysis of impact loading

This paper presents a solution to the problem of the displacement fields and strains in a semi-infinite plate with two half-circular holes during the propagation of a stress wave. The solution was realized experimentally by means of the method of the frozen strain moiré using a double-pulse ruby laser. The load of impact was applied by a pendulum hammer. Two suitable external-trigger mechanisms were used to fire the ruby laser at predetermined intervals. The moiré fringe patterns of the U and V displacement fields were recorded on a holographic film adhered to the specimen at different time delays after impact.