A Selection Rule for Hydrofluoroether Electrolyte Cosolvent: Establishing a Linear Free‐Energy Relationship in Lithium–Sulfur Batteries

Hydrofluoroethers (HFEs) have been adopted widely as electrolyte cosolvents for battery systems because of their unique low solvating behavior. The electrolyte is currently utilized in lithium‐ion, lithium–sulfur, lithium–air, and sodium‐ion batteries. By evaluating the relative solvating power of different HFEs with distinct structural features, and considering the shuttle factor displayed by electrolytes that employ HFE cosolvents, we have established the quantitative structure–activity relationship between the organic structure and the electrochemical performance of the HFEs. Moreover, we have established the linear free‐energy relationship between the structural properties of the electrolyte cosolvents and the polysulfide shuttle effect in lithium–sulfur batteries. These findings provide valuable mechanistic insight into the polysulfide shuttle effect in lithium–sulfur batteries, and are instructive when it comes to selecting the most suitable HFE electrolyte cosolvent for different battery systems.     

The lifetime of CFC substitutes studied by a network trained with chaotic mapping modified genetic algorithm and DFT calculations

The hydrohaloalkanes have attracted much attention as potential substitutes of chlorofluorocarbons (CFCs) that deplete the ozone layer and lead to great high global warming. Having a short atmospheric lifetime is very important for the potential substitutes that may also induce ozone depletion and yield high global warming gases to be put in use. Quantitative structure-activity relationship (QSAR) studies were presented for their lifetimes aided by the quantum chemistry parameters including net charges, Mulliken overlaps, E(HOMO) and E(LUMO) based on the density functional theory (DFT) at B3PW91 level, and the C-H bond dissociation energy based on AM1 calculations. Outstanding features of the logistic mapping, a simple chaotic system, especially the inherent ability to search the space of interest exhaustively have been utilized. The chaotic mapping aided genetic algorithm artificial neural network training scheme (CGANN) showed better performance than the conventional genetic algorithm ANN training when the structure of the data set was not favorable. The lifetimes of HFCs and HCs appeared to be greatly dependent on their energies of the highest occupied molecular orbitals. The perference of the RMSRE comparing to RMSE as objective function of ANN training was better for the samples of interest with relatively short lifetimes. C(2)H(6) and C(3)H(8) as potential green substitutes of CFCs present relatively short lifetimes.     

Evaluation of carbon dioxide equivalent values for greenhouse gases: CEWN as a new indicator replacing GWP

A new indicator, the CEWN (Carbon Dioxide Equivalent Warming Number), is proposed as an alternative to the GWP (Global Warming Potential). CEWN is a metric where the global warming by the emission of gases is compared unifying the removal rate of each gas from the atmosphere, using carbon dioxide as a reference. To comply with the basket system of the Kyoto Protocol, GWP is used with a 100-year time horizon, making it unsatisfactory for the evaluation of long-lived compounds. As the removal rate from the atmosphere depends on the lifetime, the CEWN presents a fair assessment of the relative global warming.     

Verification of nitrous oxide primary standard gas mixtures by gas chromatography and cavity ring-down spectroscopy for ambient measurements in South Africa

Accreditation and Quality Assurance - Nitrous oxide (N2O) is an important greenhouse gas and is the third-largest contributor to global warming with a global warming potential (GWP) higher than...     

Multipole electrostatics in hydration free energy calculations

Hydration free energy (HFE) is generally used for evaluating molecular solubility, which is an important property for pharmaceutical and chemical engineering processes. Accurately predicting HFE is also recognized as one fundamental capability of molecular mechanics force field. Here, we present a systematic investigation on HFE calculations with AMOEBA polarizable force field at various parameterization and simulation conditions. The HFEs of seven small organic molecules have been obtained alchemically using the Bennett Acceptance Ratio method. We have compared two approaches to derive the atomic multipoles from quantum mechanical calculations: one directly from the new distributed multipole analysis and the other involving fitting to the electrostatic potential around the molecules. Wave functions solved at the MP2 level with four basis sets (6-311G*, 6-311++G(2d,2p), cc-pVTZ, and aug-cc-pVTZ) are used to derive the atomic multipoles. HFEs from all four basis sets show a reasonable agreement with experimental data (root mean square error 0.63 kcal/mol for aug-cc-pVTZ). We conclude that aug-cc-pVTZ gives the best performance when used with AMOEBA, and 6-311++G(2d,2p) is comparable but more efficient for larger systems. The results suggest that the inclusion of diffuse basis functions is important for capturing intermolecular interactions. The effect of long-range correction to van der Waals interaction on the hydration free energies is about 0.1 kcal/mol when the cutoff is 12?, and increases linearly with the number of atoms in the solute/ligand. In addition, we also discussed the results from a hybrid approach that combines polarizable solute with fixed-charge water in the HFE calculation.     

Global warming potential predictions for hydrofluoroethers with two carbon atoms

Global warming potentials are predicted using computational chemistry and thermodynamics approaches for four hydrofluoroethers where no data have previously been available. We also compare results with the same methodology for six other species. We combine predictions of radiative forcing values from density functional theory computations at the B3LYP/6-31g* level of theory with previous experimentally determined or newly estimated hydroxyl radical-hydrogen abstraction rate constants to obtain these global warming potentials. We find that many of the HFEs studied have lower global warming potentials than the hydrofluorocarbons and chlorofluorocarbons they may soon replace, although other environmental and technical issues may need to be addressed first. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The lifetime of CFC substitutes studied by a network trained with chaotic mapping modified genetic algorithm and DFT calculations

The hydrohaloalkanes have attracted much attention as potential substitutes of chlorofluorocarbons (CFCs) that deplete the ozone layer and lead to great high global warming. Having a short atmospheric lifetime is very important for the potential substitutes that may also induce ozone depletion and yield high global warming gases to be put in use. Quantitative structure–activity relationship (QSAR) studies were presented for their lifetimes aided by the quantum chemistry parameters including net charges, Mulliken overlaps, E _HOMO and E _LUMO based on the density functional theory (DFT) at B3PW91 level, and the C-H bond dissociation energy based on AM1 calculations. Outstanding features of the logistic mapping, a simple chaotic system, especially the inherent ability to search the space of interest exhaustively have been utilized. The chaotic mapping aided genetic algorithm artificial neural network training scheme (CGANN) showed better performance than the conventional genetic algorithm ANN training when the structure of the data set was not favorable. The lifetimes of HFCs and HCs appeared to be greatly dependent on their energies of the highest occupied molecular orbitals. The perference of the RMSRE comparing to RMSE as objective function of ANN training was better for the samples of interest with relatively short lifetimes. C₂H₆ and C₃H₈ as potential green substitutes of CFCs present relatively short lifetimes.     

Investigation of the correlation between the energy of the highest occupied molecular orbital (HOMO) and the logarithm of the OH rate constant of hydrofluorocarbons and hydrofluoroethers

A regression based model was developed to determine whether highest occupied molecular orbital (HOMO) energies, calculated using Kohn-Sham orbital density functional theory (DFT), could be used to estimate the OH rate constants of hydrofluorocarbons (HFCs) and hydrofluoroethers (HFEs), proposed substitutes for stratospheric O₃ depleting chlorofluorocarbons. The goodness of fit of the DFT model was compared with a second regression model, derived using recently reported HOMO energies obtained from Hartree Fock theory (HFT). Both models were employed to predict OH rate constants for a number of HFCs and HFEs whose OH rate constants have not been measured, thus providing data on the types of chemical structures that may increase the OH reactivity of the substitute and hence decrease its contribution to global warming. The estimated percent standard errors in the OH rate constant HFT and DFT regression models were 72% and 78%, respectively. The goodness of fits were such that the models can differentiate between two rate constants only when their ratio exceeds about a factor of four. Model results suggest that (1) only a limited number of HFEs will have OH rate constants that are more than an order of magnitude greater than the value for their corresponding HFCs and (2) the strategy of introducing an ether linkage into an HFC to dramatically enhance its reactivity will be most effective for the least fluorinated HFCs. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Energy and exergy performance comparison of different HFC/R1234yf mixtures in vapor-compression cycles

Journal of Thermal Analysis and Calorimetry - To increase the COP and volumetric capacity of hydrofluoroolefins while reducing the global warming potential (GWP) of hydrofluorocarbons (HFCs), four...     

Gas-Phase Chemistry of 1,1,2,3,3,4,4-Heptafluorobut-1-ene Initiated by Chlorine Atoms

The possibility of mitigating climate change by switching to materials with low global warming potentials motivates a study of the spectroscopic and kinetic properties of a fluorinated olefin. The relative rate method was used to determine the rate constant for the reaction of heptafluorobut-1-ene (CF₂=CFCF₂CF₂H) with chlorine atoms in air. A mercury UV lamp was used to generate atomic chlorine, which initiated chemistry monitored by FTIR spectroscopy. Ethane was used as the reference compound for kinetic studies. Oxidation of heptafluorobut-1-ene initiated by a chlorine atom creates carbonyl difluoride (CF₂=O) and 2,2,3,3 tetrafluoropropanoyl fluoride (O=CFCF₂CF₂H) as the major products. Anharmonic frequency calculations allowing for several low-energy conformations of 1,1,2,3,3,4,4 heptafluorobut-1-ene and 2,2,3,3 tetrafluoropropanoyl fluoride, based on density functional theory, are in good accord with measurements. The global warming potentials of these two molecules were calculated from the measured IR spectra and estimated atmospheric lifetimes and found to be small, less than 1.     

The evaluation of time variation global warming effects, TWPA and CWP, for CFC alternatives

Evaluations methods of global warming are presented by considering the direct warming effect of chemical compounds and of decomposed compounds, warming effect due to the formation of troposphere ozone, and the cooling effect due to the decomposition of stratosphere ozone. It is easy to take account the stabilization of global warming gases concentration in the atmosphere, as those methods can conduct the time variations analysis. The methods are named Total Warming Prediction Analysis (TWPA) and Composite Warming Potential (CWP). The evaluation of Mobile Air Conditioning refrigerant is presented as an example of application of our method.     

Atmospheric Chemistry and Environmental Assessment of Inhalational Fluroxene

Smog chamber/gas chromatography techniques are used to investigate the atmospheric degradation of fluroxene, an anesthetic, through oxidation with OH and Cl radicals at 298 K and under atmospheric pressure of N₂ or air. The measured rate constants (k) are: k(fluroxene+OH^.)=(2.96±0.61)×10⁻¹¹ and k(fluroxene+Cl^.)=(1.62±0.19)×10⁻¹⁰ cm³ molecule⁻¹ s⁻¹. The only product detected after the oxidation of fluroxene with OH radicals is 2,2,2-trifluoroethyl formate (79 % and 83 % molar yield in the absence and presence of NOx, respectively). However, after oxidation with Cl radicals, the detected products are 2,2,2-trifluoroethyl formate (78 %), 2,2,2-trifluoroethyl-1-chloroacetate (5 %), and chloroacetaldehyde (4 %), in the absence of NOx, and 2,2,2-trifluoroethyl formate (93 %), 2,2,2-trifluoroethyl-1-chloroacetate (6 %), and chloroacetaldehyde (5 %), in the presence of NOx. The results indicate that, both in the absence and presence of NOx, the main fate of fluroxene is the addition of the oxidant to the double bond and, once the alkoxy radical is formed, the main decomposition pathway is by means of degradation. Moreover, it is expected that 2,2,2-trifluoroethyl formate is the only oxidation product able to actively contribute to climate change. To successfully assess the contribution of fluroxene to global warming, we measure the infrared spectra of fluroxene and 2,2,2-trifluoroethyl formate, and calculate the radiative efficiencies (REs) to be 0.27 and 0.28 W m⁻² ppbv⁻¹, respectively. In addition, the cumulative effect owing to the formation of 2,2,2-trifluoroethyl formate is investigated, and the direct, indirect, and net global-warming potentials are calculated by using the REs and lifetimes of fluroxene and 2,2,2-trifluoroethyl formate.     

Fluorocarbon Separation in a Thermally Robust Zirconium Carboxylate Metal–Organic Framework

Fluorocarbons have important applications in industry, but are environmentally unfriendly, and can cause ozone depletion and contribute to the global warming with long atmospheric lifetimes and high global warming potential. In this work, the metal–organic framework UiO‐66(Zr) is demonstrated to have excellent performance characteristics to separate fluorocarbon mixtures at room temperature. Adsorption isotherm measurements of UiO‐66(Zr) display high fluorocarbon sorption uptakes of 5.0 mmol g^?1 for R22 (CHClF₂), 4.6 mmol g^?1 for R125 (CHF₂CF₃), and 2.9 mmol g^?1 for R32 (CH₂F₂) at 298 K and 1 bar. Breakthrough data obtained for binary (R22/R32 and R32/R125) and ternary (R32/R125/R134a) mixtures reveal high selectivities and capacities of UiO‐66(Zr) for the separation and recycling of these fluorocarbon mixtures. Furthermore, the UiO‐66(Zr) saturated with R22 and R125 can be regenerated at temperatures as low as 120 °C with excellent desorption–adsorption cycling stabilities.     

Chemical ionization mass spectrometry of hydrofluorocarbons, hydrofluorocarbon ethers and perfluoroalkenes

Positive and negative chemical ionization (CI) mass spectrometry is studied for hydrofluorocarbons (HFCs), hydrofluorocarbon ethers (HFEs), and perfluoroalkenes (PFCs) using various kinds of reagent gas. While no quasi-molecular ion was observed under electron impact ionization for saturated MFCs, [M-F]⁺ is detected under CI conditions using methane as a reagent gas. Mechanisms for the generation of [M-F]⁺ are discussed. Furthermore, nitrogen monoxide can be used as a reagent gas to observe [M + NO]⁺ for many HFCs and HFEs. In negative mode chloroform is also available to generate [M + Cl]⁻ for HFCs and HFEs containing -CHF- groups.     

A corresponding states treatment of the liquid–vapor saturation line

In this work we analyze correlations for the maxima of products of some liquid–vapor saturation properties. These points define new characteristic properties of each fluid that are shown to exhibit linear correlations with the critical properties. We also demonstrate that some of these properties are well correlated with the acentric factor. An application is made to predict the properties of two new low global warming potential (GWP) refrigerants.     

Sustainability assessments of bio-based polymers

Bio-based polymers have become feasible alternatives to traditional petroleum-based plastics. However, the factors that influence the sustainability of bio-based polymers are often unclear. This paper reviews published life cycle assessments (LCAs) and commonly used LCA databases that quantify the environmental sustainability of bio-based polymers and summarizes the range of findings reported within the literature. LCA is discussed as a means for quantifying environmental impacts for a product from its cradle, or raw materials extraction, to the grave, or end of life. The results of LCAs from existing databases as well as peer-reviewed literature allow for the comparison of environmental impacts. This review compares standard database results for three bio-based polymers, polylactic acid (PLA), polyhydroxyalkanoate (PHA), and thermoplastic starch (TPS) with five common petroleum derived polymers. The literature showed that biopolymers, coming out of a relatively new industry, exhibit similar impacts compared to petroleum-based plastics. The studies reviewed herein focused mainly on global warming potential (GWP) and fossil resource depletion while largely ignoring other environmental impacts, some of which result in environmental tradeoffs. The studies reviewed also varied greatly in the scope of their assessment. Studies that included the end of life (EOL) reported much higher GWP results than those that limited the scope to resin or granule production. Including EOL in the LCA provides more comprehensive results for biopolymers, but simultaneously introduces greater amounts of uncertainty and variability. Little life-cycle data is available on the impacts of different manners of disposal, thus it will be critical for future sustainability assessments of biopolymers to include accurate end of life impacts.     

ON THE ABRUPT CHANGE IN SOUTH ASIAN SUMMER MONSOON CLIMATE AND ITS SYNCHRONISM WITH THE GLOBAL RAPID WARMING

This paper has analysed the major characteristics of long-term variation, of summermonsoon climate in South Asia since 1888. An abrupt enhancement of summer monsoon inthe 1920s and its synchronism with the global rapid warming have been detected by theMann-Kendall Rank Statistic test. Based on diagnostic analysis on the atmospheric circulationover the monsoon region and the thermal conditions of both ocean and land during theperiod of abrupt change, it is found that the warming over land was stronger and earlierthan that over the ocean, which would enhance the land-sea thermal contrast and thereforebe favorable to the development of monsoon low and the disturbance in the monsoon flow.This may be a direct factor for the abrupt enhancement of summer monsoon.     

Contribution to Global Warming of Plasma Polymerization and Treatment Processes Fed with Fluorinated Compounds

Many fluorine containing compounds utilized in plasma processing, namely plasma polymerization and treatment of materials, have marked greenhouse characteristics as they are able to absorb IR-radiation and have long lifetimes in the atmosphere. The unreacted portion of the feeds and some by-products released in the atmosphere during plasma processing contribute to the global warming of the Earth. This is a problem whose general aspects are discussed in this paper, together with the evaluation of the effects on global warming of the effluents of plasmas fed with some fluorine containing compounds.     

The lifetimes of organosulphur compounds in the troposphere

Dimethyl sulphide and other reduced sulphur compounds, produced by marine biogenic activity and other processes, play a significant role in the global biogeochemical cycling of the element. The rates of their reactions with atmospheric oxidants are reviewed and their lifetimes in the troposphere due to the various reactions are computed. Sufficient data are available on the tropospheric abundance of the hydroxyl radical (OH) and on the rates of its reactions with the sulphur compounds for reasonable estimates to be made of the sulphur lifetimes with respect to OH. Summertime lifetimes of 14–87 h for (CH₃)₂S are computed at different latitudes. In the case of the tropospheric concentrations of the nitrate radical (NO₃), few data are available. There is a similar paucity of data on its rates of reactions with the sulphur compounds, and so large uncertainties exist in the computed lifetimes. These are, in any case, much longer than those due to OH. The possibility exists that iodine photochemistry, producing iodoxyl (IO) radicals, may efficiently oxidize the reduced sulphur and other organic compounds in the marine troposphere leading to lifetimes of the order of hours. Few data exist on the rates or mechanisms of these reactions and these are identified as representing the greatest uncertainties in the estimates of organosulphur lifetimes in the troposphere.     

六氟乙烷的热分解特性

采用管式炉研究了950~1100 ℃温度区间C2F6的分解特性, 并研究了C2F6的初始浓度、反应温度、停留时间对C2F6分解率的影响. 实验结果表明, C2F6初始浓度越低、温度越高、反应时间越长, C2F6分解率就越高. 同时, 热解反应的反应级数应该介于0和1之间. 在温度为1100 ℃, C2F6初始浓度为223.21 μmol/L, 停留时间为2 s时, C2F6分解率高达90%. 根据Arrhenius方程计算, 在950~1100 ℃, C2F6热分解反应的活化能(Ea)为313.2 kJ/mol, 频率因子(A)为8.8×1011 s-1.