Fabrication of polymersomes with controllable morphologies through dewetting w/o/w double emulsion droplets

In this work, monodisperse giant polymersomes are fabricated by dewetting of water-in-oil-in-water double emulsion droplets which are assembled by amphiphilic block copolymer molecules in a microfluidic device. The dewetting process can be tuned by solvation between solvent and amphiphilic block copolymer to get polymersomes with controllable morphology. Good solvent(chloroform and toluene) hinders dewetting process of double emulsion droplets and gets acornlike polymersomes or patched polymersomes. On the other hand, poor solvent(hexane) accelerates the dewetting process and achieves complete separation of inner water phase from oil phase to form complete bilayer polymersomes. In addition, twin polymersomes with bilayer membrane structure are formed by this facile method. The formation mechanism for different polymersomes is discussed in detail.     

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS(40)-b-P(PEGMA300)(48)), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS(21)-b-PS(31)), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly.     

Transitions of bipolar to radial orientation of liquid crystal droplets in amphiphilic system of PDLC film

The orientation order of nanoscale droplets of thermotropic liquid crystals (LCs) suspended in polymer dispersed liquid crystal (PDLC) solutions prepared with different medias (e.g., polymers, surfactants, nonpolar materials like dyes) respond sensitively and differently via molecular interactions. Such a valuable knowledge provides basis for understanding the properties of PDLC devices. Previously, many studies have explored the droplets size, electro-optical property variations in PDLC films by varying the materials types and its compositions. However, the variations in droplet orientation order with respect to material type and composition provide a new class of study in this particular field. The current study explored the transition in droplet orientation from bipolar to radial on varying the amphiphilic block copolymer concentrations. Further, the variations in surface energies of LCs in different series of block copolymer medias were investigated by contact angle measurements.     

Spontaneous generation of amphiphilic block copolymer micelles with multiple morphologies through interfacial Instabilities

We introduce a method for the formation of block copolymer micelles through interfacial instabilities of emulsion droplets. Amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) copolymers are first dissolved in chloroform; this solution is then emulsified in water and chloroform is extracted by evaporation. As the droplets shrink, the organic solvent/water interface becomes unstable, spontaneously generating a new interface and leading to dispersion of the copolymer as micellar aggregates in the aqueous phase. Depending on the composition of the copolymer, spherical or cylindrical micelles are formed, and the method is shown to be general to polymers with several different hydrophobic blocks: poly(1,4-butadiene), poly(-caprolactone), and poly(methyl methacrylate). Using this method, hydrophobic species dissolved or suspended in the organic phase along with the amphiphilic copolymer can be incorporated into the resulting micelles. For example, addition of PS homopolymer, or a PS-PEO copolymer of different composition and molecular weight, allows the diameter and morphology of wormlike micelles to be tuned, while addition of hydrophobically coated iron oxide nanoparticles enables the preparation of magnetically loaded spherical and wormlike micelles.     

Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces

We describe the surface segregation of polypeptide-based block copolymer micelles to produce stimuli-responsive nanostructures at the polymer blend/air interface. Such structures were obtained by simultaneous surface migration and self assembly at the surface of diblock copolymer/homopolymer blends. We employed blends composed of homopolymer (PS) and an amphiphilic block copolymer polystyrene-b-poly(l-glutamic acid) (PS-b-PGA). The surface was functionalized based on the preferential segregation to the polymer blend/air interface of the hydrophilic PGA block of the diblock copolymer upon annealing to water vapor. The surface migration of the diblock copolymer to the interface was demonstrated both by XPS and contact angle measurements. As a consequence, the PGA interfacial attraction leads to a large surface excess on diblock copolymer which in turn, through macrophase and microphase separation, produced separated domains at the surface with regions composed either of homo or block copolymer. Herein we demonstrate that the use of asymmetric diblock copolymers with a higher content in PS lead to spherical micellar assemblies randomly distributed at the surface. As observed by AFM imaging the blend composition, i.e. the amount of block copolymer within the blend influences the density of micelles at the surface. Finally, when exposed to water, the pH affects the surface morphology. The PGA segments are collapsed at low pH values and extended at pH values above 4.8, thus inducing variations on the topography of the films at the nanometer scale.     

Single‐step process to produce functionalized multiresponsive polymeric particles

Monodisperse functional multiresponsive particles were prepared by encapsulation of an amphiphilic diblock copolymer during the precipitation polymerization of polystyrene and divinylbenzene in one single step. The amphiphilic diblock copolymer employed throughout this study, polystyrene‐b‐poly (dimethylaminoethyl methacrylate) (PS‐b‐PDMAEMA) has been synthesized by ATRP in two consecutive polymerization steps. After encapsulation of the block copolymer within the microsphere, the surface modification of the particle occurs spontaneously upon exposure to water by surface segregation of the hydrophilic PDMAEMA block, thus without any additional post‐polymerization and/or chemical modification steps. The response of the functionalized particles both to pH and temperature was analyzed by potential zeta and DSC measurements. Upon dispersion of the particles in acidic media, the PDMAEMA block in its charged state is soluble and does not exhibit any change by heating. At higher pH values and temperatures above 35 °C (Low Critical Solubility Temperature of the PDMAEMA block) the hydrophilic segment collapses as detected by differential scanning calorimetry. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3523–3533, 2010     

Solid-supported block copolymer membranes through interfacial adsorption of charged block copolymer vesicles

The properties of amphiphilic block copolymer membranes can be tailored within a wide range of physical parameters. This makes them promising candidates for the development of new (bio)sensors based on solid-supported biomimetic membranes. Here we investigated the interfacial adsorption of polyelectrolyte vesicles on three different model substrates to find the optimum conditions for formation of planar membranes. The polymer vesicles were made from amphiphilic ABA triblock copolymers with short, positively charged poly(2,2-dimethylaminoethyl methacrylate) (PDMAEMA) end blocks and a hydrophobic poly( n-butyl methacrylate) (PBMA) middle block. We observed reorganization of the amphiphilic copolymer chains from vesicular structures into a 1.5+/-0.04 nm thick layer on the hydrophobic HOPG surface. However, this film starts disrupting and dewetting upon drying. In contrast, adsorption of the vesicles on the negatively charged SiO2 and mica substrates induced vesicle fusion and formation of planar, supported block copolymer films. This process seems to be controlled by the surface charge density of the substrate and concentration of the block copolymers in solution. The thickness of the copolymer membrane on mica was comparable to the thickness of phospholipid bilayers.     

The research on multi‐responsive azobenzene block copolymer and its self‐assembly behavior

The azobenzene‐based amphiphilic copolymers have drawn significant attention as a kind of multi‐responsive smart materials. The demand on deeper investigation of how the azobenzene group influences the micelles formation and light‐responsive behavior on molecular level is very urgent. In this article, multi‐responsive block copolymers, poly (acrylic acid)‐block‐poly[4'‐[[(2‐Methacryloyloxy)ethyl]ethylainino]azobenzene‐co‐poly (ethylene glycol) methyl ether methacrylate] (PAA‐b‐P (AzoMA‐co‐PEGMA)), with pH‐, light‐ and reduction‐responsiveness were synthesized by the monomers of AzoMA, PEGMA and acrylic acid via reversible addition‐fragmentation chain transfer polymerization (RAFT). The amphiphilic block copolymer presented aggregation‐induced emission effect, and it was pH, light, and reduction responsive. The results showed that the micelle size decreased with the decreasing of pH within a certain range. However, the particle size of micelles increased significantly when the pH was 4. Once adding reduction agent, the micelles were disassembly. Fluorescent molecule of Nile red was selected as a hydrophobic guest molecule to study the properties of encapsulating and releasing abilities of block copolymer micelles for guest molecules. The results showed that the loading capacity of three kinds of copolymer micelles was closely related to the aggregates formed by the hydrophobic block, mainly azobenzene block. Besides, the block copolymer micelles could release a certain amount of Nile red under the irradiation of UV light, the reduction with Na₂S₂O₄ as reductant, and the exposure to alkaline environment. The mechanism of how the different status of azobenzene group influenced the self‐assembly and multi‐responsive behavior was explored on molecular level.     

Interfacial tension of evaporating emulsion droplets containing amphiphilic block copolymers: effects of solvent and polymer composition

Evaporating droplets of volatile organic solvent containing amphiphilic block copolymers may undergo hydrodynamic instabilities that lead to dispersal of copolymer micelles into the surrounding aqueous phase. As for related phenomena in reactive polymer blends and oil/water/surfactant systems, this process has been ascribed to a nearly vanishing or transiently negative interfacial tension between the water and solvent phases induced by adsorption of copolymer to the interface. In this report, we investigate the influence of the choice of organic solvent and polymer composition for a series of polystyrene-b-poly(ethylene oxide) (PS-PEO) diblock copolymers, by in situ micropipette tensiometry on evaporating emulsion drops. These measurements suggest that the sensitivity to the organic solvent chosen reflects both differences in the bare solvent/water interfacial tension as well as the propensity of the copolymer to aggregate within the organic phase. While instabilities coincident with an approach of the interfacial tension nearly to zero were observed only for copolymers with PEO content greater than 15 wt.%, beyond this point the interfacial behavior and critical concentration needed to trigger surface instability were found to depend only weakly on copolymer composition.     

Polymer micelles from tadpole-shaped amphiphilic block-graft copolymers prepared by “Grafting-through” ATRP

A series of tadpole-shaped block-graft amphiphilic copolymers, i.e., block copolymers consisting of a cylindrical hydrophilic brush block and a coiled hydrophobic block were synthesized using “grafting-through” atom transfer radical polymerization. A tadpole-shaped block-graft copolymer from polystyrene bromide and a methacryloyl-terminated poly(tert-butyl acrylate) was prepared first. Then, hydrolysis of the poly(tert-butyl acrylate) side chains to polyacrylic acid side chains provided tadpole-shaped block-graft amphiphilic copolymers, which formed pH responsive micelles in water, the latter being confirmed by dynamic light scattering and atomic force microscopy.     

PS-b-PAA两亲性嵌段聚电解质在水溶液中的聚集行为及其流变特性

以两嵌段共聚物聚苯乙烯-b-聚丙烯酸(PS-b-PAA)为研究对象,采用动态光散射(DLS)及透射电镜(TEM)表征了胶束及聚集体的结构,采用应力控制型旋转流变仪AR-G2研究了体系的流变特性.着重考察了聚电解质浓度、pH值以及外加盐(KBr)浓度对其在水中聚集行为的影响及对体系流变特性的影响.发现随着外加盐和聚电解质浓度的增高,体系中的胶束发生聚集,形成更大的聚集体.而pH值对胶束的聚集形态无明显的影响.胶束乳液均呈现明显的剪切变稀特征.然而,随着聚电解质浓度增加,低剪切速率下体系的表观粘度增高;高剪切速率时体系粘度趋于同一值(0.01Pa·s).与纯胶束乳液相比,外加盐的存在导致体系粘度增加;当外加盐浓度增加至4.31g/L,在低剪切速率下,体系出现牛顿平台区.溶液pH值对体系粘度无显著影响.     

Amino‐Acid‐Based Block Copolymers by RAFT Polymerization

This review summarizes recent advances in the design and synthesis of amino‐acid‐based block copolymers by reversible addition–fragmentation chain transfer (RAFT) polymerization of amino‐acid‐bearing monomers. We will mainly focus on stimuli‐responsive block copolymers, such as pH‐, thermo‐, and dual‐stimuli‐responsive block copolymers, and self‐assembled block copolymers, including amphiphilic and double‐hydrophilic block copolymers having tunable chiroptical properties. We will also highlight recent results in RAFT synthesis of amino‐acid‐based copolymers having various properties, such as catalytic and optoelectronic properties, cross‐linked block copolymer micelles, unimolecular micelles, and organic–inorganic hybrids.     

Small-angle-neutron-scattering from giant water-in-oil microemulsion droplets. II. Polymer-decorated droplets in a quaternary system

Amphiphilic block copolymers of the type poly(ethylenepropylene)-co-poly(ethyleneoxide) dramatically enhance the solubilisation efficiency of non-ionic surfactants in microemulsions that contain equal volumes of water in oil. Consequently, the length scale of the microstructure of such bicontinuous microemulsions is dramatically increased up to the order of a few 100 nm. In this paper, we show that this so-called efficiency boosting effect can also be applied to water-in-oil microemulsions with droplet microstructure. Such giant water-in-oil microemulsions would provide confined compartments in which chemical reactions of biological macromolecules can be performed on a single molecule level. With this motivation we investigated the phase behavior and the microstructure of oil-rich microemulsions containing D(2)O, n-decane(d22), C(10)E(4) and the amphiphilic block copolymer PEP5-PEO5 [poly(ethylenepropylene)-co-poly(ethyleneoxide), weight per block of 5000 g/ mol]. We found that 15 wt % of water can be solubilised by 5 wt % of surfactant and block copolymer when about 6 wt % of surfactant is replaced by the block copolymer. Small-angle-neutron-scattering experiments were performed to determine the length scales and microstructure topologies of the oil-rich microemulsions. To analyze the scattering data, we derived a novel form factor that also takes into account the scattering contribution of the hydrophobic part of the block copolymer molecules that reside in the surfactant shell. The quantitative analysis of the scattering data with this form factor shows that the radius of the largest droplets amounts up to 30 nm. The novel form factor also yielded qualitative information on the stretching of the polymer chains in dependence on the polymer surface density and the droplet radius.     

Characterization of novel pH-sensitive polymeric micelles prepared by the self-assembly of amphiphilic block copolymer with poly-4-vinylpyridine block synthesized by mechanochemical solid-state polymerization

We fabricated novel pH-sensitive polymeric micelles consisting of amphiphilic block copolymer containing pyridyl groups as side chains in the hydrophobic block. The number average particle diameter of the polymeric micelles at pH 7 was approximately 200 nm. A decrease in pH resulted in deformation of the polymeric micelles over a very narrow pH range (between pH 5.7 and 5.6). Interestingly, micellization and demicellization occurred reversibly in this narrow pH range. Polymeric micelles incorporating 5-fluorouracil (5FU) were also prepared. Decreasing the pH of this polymeric micelle solution from 7 to 5.5 resulted in the rapid release of 5FU at pH 5.6; the drug was completely released within 30 min. These results suggest that deformation of the polymeric micelles caused the rapid release of 5FU.     

Sorption of anionic amphiphilic block copolymers by a network polycation

The interaction of amphiphilic block copolymers comprising an anionic block (polyacrylate or polymethacrylate) and a hydrophobic block (polystyrene, poly(butyl acrylate) or polyisobutylene) with lightly crosslinked poly(N,N-diallyl-N,N-dimethylammonium chloride) is studied for the first time. It is shown that the cationic hydrogel can sorb anionic amphiphilic block copolymers via electrostatic interaction with the corona of block copolymer micelles. The rate of sorption of block copolymer polyelectrolytes is significantly lower than the rate of sorption of linear polyions and is controlled by the lengths of the hydrophilic and hydrophobic blocks and the flexibility of the latter blocks. The sorption of amphiphilic block copolymers is accompanied by their self-assembly in the polycomplex gel and formation of a continuous hydrophobic layer impermeable to water and the low-molecular-mass salt dissolved in it.     

Self-assembly of amphiphilic liquid crystal polymers obtained from a cyclopropane-1,1-dicarboxylate bearing a cholesteryl mesogen

We study the self-assembly of a new family of amphiphilic liquid crystal (LC) copolymers synthesized by the anionic ring-opening polymerization of a new cholesterol-based LC monomer, 4-(cholesteryl)butyl ethyl cyclopropane-1,1-dicarboxylate. Using the t-BuP(4) phosphazene base and thiophenol or a poly(ethylene glycol) (PEG) functionalized with thiol group to generate in situ the initiator during the polymerization, LC homopolymer and amphiphilic copolymers with narrow molecular weight distributions were obtained. The self-assemblies of the LC monomer, homopolymer, and block copolymers in bulk and in solution were studied by small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and transmission electron microscopy (TEM). All polymers exhibit in bulk an interdigitated smectic A (SmA(d)) phase with a lamellar period of 4.6 nm. The amphiphilic copolymers self-organize in solution into vesicles with wavy membrane and nanoribbons with twisted and folded structures, depending on concentration and size of LC hydrophobic block. These new morphologies will help the comprehension of the fascinating organization of thermotropic mesophase in lyotropic structures.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Pathways of polymeric vesicle formation

Polymeric vesicle formation is dictated by the mutual diffusion of water into the bulk block copolymer and vice versa. The hydration of three poly(ethylene oxide)-co-poly(butylene oxide) copolymers with different molecular weights has been monitored both macroscopically (confocal laser scanning microscopy) and microscopically (small-angle X-ray scattering). Both methods have revealed that the amphiphilic block copolymers swell in water following two qualitatively different growth regimes. Initially, water and copolymer diffuse into each other following a subdiffusional growth as the result of a molecular-level arrangement of the amphiphilic membranes that comprise the swollen copolymer. After a critical time, which is exponential in polymer molecular weight, the amphiphilic membranes reach their equilibrium morphology and as a consequence the growth starts to follow Fickian diffusion. The complex hydration kinetics dictate the phases formed at the interface between the amphiphilic copolymer and water. Upon hydration of simple amphiphiles, the amphiphilic film swells and the concentration gradient at the interface with water gradually drops to zero. This strongly affects the complex driving forces that control vesicle formation. Indeed, to form vesicles, an energy barrier has to be overcome, and therefore a constant concentration gradient is required. We show, by enhancing the hydration kinetics via an ac field, how the interface concentration gradient is kept constant and the magnitude of this gradient dictates the final size of the vesicles.     

Synthesis,self-assembly and photo-responsive behavior of AB2 shaped amphiphilic azo block copolymer

In this work, we report the synthesis of AB2 shaped amphiphilic azo block copolymer by macromolecular azo coupling reaction. The product and intermediates were characterized by various methods. The selfassembly in selected solvents and photo-responsive behavior of the copolymer were studied by means of UV–vis spectrophotometry and TEM. Spherical aggregates can be obtained by gradually adding water into the solution of this amphiphilic azo block copolymer. Upon irradiation with polarized UV(365 nm)light, the aggregates can be elongated in the polarized direction.     

Formation of gold nanoparticles in microreactor composed of helical peptide assembly in water

A novel microreactor was prepared by self-assembly of an amphiphilic block copolymer composed of a hydrophobic helical peptide unit with a naphthyl group at the C terminal and a hydrophilic poly(ethylene glycol) unit. The copolymer formed a self-assembly in water, taking a vesicular structure. Noticeably, when the copolymer was dispersed in an Au(3+) aqueous solution, gold nanoparticles were formed without addition of any reducing reagent. The naphthyl groups, which are located at the inner surface of the vesicular assembly, promoted the reduction of Au(3+) ions with accompanying pH decrease.