An analytical solution and analysis of characters for viscoelastic fluid flow in annular pipe

I.Introducti0nLuiCiqunandHuangJunqiI'I(l989),ZhuWeihuiandLuiCiquri1'l(l992)sequentiallystudiedtheaxialflowofsecondorderandMaxwellfluidsandanalyzedtheflowcharactersofthesefluids.Thispaperwillstudyunsteadyrotat0ryflowofsecondorderandMaxwellfluidsinannularpi…     

Analytical solutions of the helical flow of non newtonian fluid in eccentric annular space

ＡＮＡＬＹＴＩＣＡＬＳＯＬＵＴＩＯＮＳＯＦＴＨＥＨＥＬＩＣＡＬＦＬＯＷＯＦＮＯＮＮＥＷＴＯＮＩＡＮＦＬＵＩＤＩＮＥＣＣＥＮＴＲＩＣＡＮＮＵＬＡＲＳＰＡＣＥＺｈａｎｇＨａｉ－ｑｉａｏ（张海桥）ＷｕＪｉ－ｚｈｏｕ（吴继周）（ＴｈｅＤｅｐａｒｔｍｅｎｔｏｆ...     

内管自转且公转时环管幂律流的受力分析

数值模拟了环管中内管偏心自转且公转时由轴向压力所驱动的幂律流体充分发展层流,分析了内管上的流体作用力。结果表明,内管偏心自转时流体作用力具有推动内管作和自转同向公转的效果。当只有外力矩驱动内管自转时,由于流体的作用,随内管线密度的不同,内管能达到的受力平衡态也不同:线密度较小时内管仅能在同心自转时达到受力平衡;线密度较大时内管能在作具有不变角速度和偏心率公转时达到受力平衡,且内管线密度越大,对应的受力平衡的公转的偏心率也越大。     

Magnetohydrodynamic flow of a Sisko fluid in annular pipe: A numerical study

This paper presents a numerical study for the unsteady flow of a magnetohydrodynamic (MHD) Sisko fluid in annular pipe. The fluid is assumed to be electrically conducting in the presence of a uniform magnetic field. Based on the constitutive relationship of a Sisko fluid, the non‐linear equation governing the flow is first modelled and then numerically solved. The effects of the various parameters especially the power index n, the material parameter of the non‐Newtonian fluid b and the magnetic parameter B on the flow characteristics are explored numerically and presented through several graphs. Moreover, the shear‐thinning and shear‐thickening characteristics of the non‐Newtonian Sisko fluid are investigated and a comparison is also made with the Newtonian fluid. Copyright © 2009 John Wiley & Sons, Ltd.     

Analytical solution of flow of second-order non-Newtonian fluids through annular pipes

This paper presents an analytical solution to the unsteady flow of the second-order non-Newtonian fluids by the use of intergral transformation method.Based on the numerical results,the effect of non-Newtonian coefficient Hc and other parameters on the flow are analysed.It is shown that the annular flow has a shorter characteristic time than the general pipe flow while the correspondent velocity,average velocity have a(?)aller value for a given Hc.Else,when radii ratio keeps unchanged,the shear stress of inner wall of annular flow will change with the inner radius compared with the general pipe flow and is always smaller than that of the outer wall.     

An investigation on internal thermal flow of non-Newtonian fluid

In the present paper an unsteady thermal flow of non-Newtonian fluid is investigated which is of the fiow into axisymmetric mould cavity. In the second part an unsteady thermal flow of upper-convected Maxwell fluid is studied, For the flow into mould cavity the constitutive equation of power-law fluid is used as a rheological model of polymer fluid. The apparent viscosity is considered as a function of shear rate and temperature. A characteristic viscosity is introduced in order to avoid the nonlinearity due to the temperature dependence of the apparent viscosity. As the viscosity of the fluid is relatively high the flow of the thermal fluid can be considered as a flow of fully developed velocity field. However, the temperature field of the fluid fiow is considered as an unsteady one. The governing equations are constitutive equation, momentum equation of steady flow and energy conservation equation of non-steady form. The present system of equations has been solved numerically by the splitting differen     

Unsteady unidirectional micropolar fluid flow

This paper considers the unsteady unidirectional flow of a micropolar fluid, produced by the sudden application of an arbitrary time dependent pressure gradient, between two parallel plates. The no-slip and the no-spin boundary conditions are used. Exact solutions for the velocity and microrotation distributions are obtained based on the use of the complex inversion formula of Laplace transform. The solution of the problem is also considered if the upper boundary of the flow is a free surface. The particular cases of a constant and a harmonically oscillating pressure gradient are then examined and some numerical results are illustrated graphically.     

GENERAL SECOND ORDER FLUID FLOW IN A PIPE

ＧＥＮＥＲＡＬＳＥＣＯＮＤＯＲＤＥＲＦＬＵＩＤＦＬＯＷＩＮＡＰＩＰＥＨｅＧｕａｎｇｙｕ（何光渝）（ＤｅｐａｒｔｍｅｎｔｏｆＰｅｔｒｏｌｅｕｍＥｎｇｉｎｅｅｒｉｎｇ，Ｘｉ＇ａｎＰｅｔｒｏｌｅｕｍＩｎｓｔｉｔｕｔｅ，Ｘｉ＇ａｎ７１００６１，Ｐ．Ｒ．Ｃｈｉ...     

Similarity solutions for non-Newtonian power-law fluid flow

The problem of the boundary layer flow of power law non-Newtonian fluids with a novel boundary condition is studied.The existence and uniqueness of the solutions are examined,which are found to depend on the curvature of the solutions for different values of the power law index n.It is established with the aid of the Picard-Lindel¨of theorem that the nonlinear boundary value problem has a unique solution in the global domain for all values of the power law index n but with certain conditions on the curvature of the solutions.This is done after a suitable transformation of the dependent and independent variables.For 0 n 1,the solution has a positive curvature,while for n 1,the solution has a negative or zero curvature on some part of the global domain.Some solutions are presented graphically to illustrate the results and the behaviors of the solutions.     

Generalized flow analysis of non-Newtonian visco-elastic fluid flow through fractal reservoir

Ｆｒａｃｔａｌｇｅｏｍｅｔｒｙｉｓａｐｏｗｅｒｆｕｌｔｏｏｌｔｏｄｅｓｃｒｉｂｅｃｏｍｐｌｅｘｐｈｅｎｏｍｅｎｏｎ．Ｅｓｐｅｃｉａｌｌｙｉｔｉｓａｐｐｒｏｐｒｉａｔｅｔｏｓｃａｌｅｔｈｅｎｏｎｕｎｉｆｏｒｍｉｔｙａｎｄｎｏｎｓｅｑｕｅｎｃｅｏｆｐｏｒｏｕｓｍｅｄｉａ．Ｉｆｔｈｅｍｅｃｈａｎｉｃｓｏｆｆｌｕｉｄｆｌｏｗｔｈｒｏｕｇｈｐｏｒｏｕｓｍｅｄｉａｉｓｓｔｕｄｉｅｄｂｙｕｓｉｎｇｆｒａｃｔａｌ,ｔｈｅｄｉｓｃｅｒｎｉｂｌｅａｎｄｃｏｇｎｉｔｉｖｅａｂｉｌｉｔｙｆｏｒｐｏｒｏｕｓｍｅｄｉａａｎ…     

Unsteady flow of an elastico-viscous fluid between two coaxial circular cylinders

Unsteady flow of an Oldroyd fluid between two coaxial circular cylinders is investigated, the fluid being set in motion as the inner cylinder moves from rest for a certain period with linearly growing speed and then stops suddenly. The Laplace transform technique is used to derive the solution. For the case when the gap between the cylinders is small, a simplified solution is obtained. The expression for the shear stress on the wall of the outer cylinder is obtained and particular cases are discussed.     

Unsteady flow of a fourth-grade fluid due to an oscillating plate

The governing non-linear high-order, sixth-order in space and third-order in time, differential equation is constructed for the unsteady flow of an incompressible conducting fourth-grade fluid in a semi-infinite domain. The unsteady flow is induced by a periodically oscillating two-dimensional infinite porous plate with suction/blowing, located in a uniform magnetic field. It is shown that by augmenting additional boundary conditions at infinity based on asymptotic structures and transforming the semi-infinite physical space to a bounded computational domain by means of a coordinate transformation, it is possible to obtain numerical solutions of the non-linear magnetohydrodynamic equation. In particular, due to the unsymmetry of the boundary conditions, in numerical simulations non-central difference schemes are constructed and employed to approximate the emerging higher-order spatial derivatives. Effects of material parameters, uniform suction or blowing past the porous plate, exerted magnetic field and oscillation frequency of the plate on the time-dependent flow, especially on the boundary layer structure near the plate, are numerically analysed and discussed. The flow behaviour of the fourth-grade non-Newtonian fluid is also compared with those of the Newtonian fluid.     

Variational principles in hydrodynamics of a non-Newtonian fluid

I.IntroductionTileresearchworkonvariationalprincipleinhydrodynamicsstartedasearlyas1940's.Referencesl:~6]aretheoneswhichmakemoreimportantcolltributions.l-lowevcr,mostoftheseworksstudied11on-viscousflow,putemphasisontheproblemsofexternalllcld,andworkedontilebasisofBernoulli'sequation.Prot'essorChienWeizang11I.slesttlblishcdvariationalprincipleforhydrodynalllicpl-oblemofviscousfluid,thatistheprillciplcofmaxilnLllllpowerlosses,alldgeneralizedvariational(stationary)pl.inciplesoiltilebiLsisofNav…     

Magnetohydrodynamic pipe flow in ducts with partial circular ring cross section and annular cross section

In this paper we use the Green function method to solve the problem of steady one dimensional flow of an incompressible viscous, electrically conducting fluid through a pipe with partial circular ring cross section and one with annular cross section, in the presence of an applied transverse uniform magnetic field. We obtain analytic solutions and carry out some numerical calculations of the velocity distribution and induced magnetic field.     

Entrance flow in eccentric annular ducts

A control-volume-based solution of the complete set of Navier-Stokes equations for the laminar, three-dimensional developing flow in straight, eccentric, cylindrical annular ducts is described. Numerical results for velocity and pressure development, pressure defect and entrance lengths are presented for a wide range of duct parameters, i.e. relative eccentricity ? and radius ratio γ. The present results match very well with earlier numerical solutions for the limiting cases of developing flow in concentric ducts and fully developed flow in eccentric ducts. Comparison with earlier approximate results for developing flow in eccentric ducts indicates that the approximate model predicts the velocity and pressure development with an error of about 10%. However, the development length predicted by the approximate model is grossly in error. The pressure defect and development length in eccentric ducts are very high compared with their counterparts in concentric ducts. The pressure defect, development length and maximum velocity increase with the radius ratio for eccentric ducts, while the reverse is true for concentric ducts. Also, the apparent friction factor decreases as the eccentricity increases.     

Entropy analysis for third grade fluid flow with Vogel model viscosity in annular pipe

The steady-state flow of a third grade fluid between concentric circular cylinders is considered and entropy generation due to fluid friction and heat transfer in the annular pipe is examined. Depending upon the fluid viscosity, entropy generation in the flow system varies. The third grade fluid is employed to account for the non-Newtonian effect while Vogel model is accommodated for temperature-dependent viscosity. The analysis is based on perturbation technique. The closed form solutions for velocity, temperature and entropy fields are presented. Entropy generation due to fluid friction and heat transfer in the flow system is formulated. The influence of viscosity parameters A and B on the entropy generation number is investigated. It is found that entropy generation number reduces with increasing viscosity parameter A, which is more pronounced in the region close to the annular pipe inner wall and opposite is true for increasing viscosity parameter B.     

Unsteady flow of viscoelastic fluid with fractional Maxwell model in a channel

The unsteady flow of viscoelastic fluid with the fractional derivative Maxwell model (FDMM) in a channel is studied in this note. The exact solutions are obtained for an arbitrary pressure gradient by means of the finite Fourier cosine transform and the Laplace transform. Two special cases of pressure gradient are discussed. Some results given by the classical models with integer-order are included in this note.     

On the role of droplets in cocurrent annular and churn-annular pipe flow

Decreasing the gas flow-rate in an initially vertical upward annular dispersed pipe-flow, will eventually lead to a down-flow of liquid. The onset of this down-flow has been related in the literature to the presence of the dispersed phase and the instability of the liquid film. Here we investigate how the dispersed-phase may influence the down-flow, performing detailed PDA-measurements in a 5 cm vertical air–water annular-flow. It is shown that the dispersed-phase does not cause the liquid down-flow, but that it delays the onset of liquid down-flow. In cocurrent annular flow the dispersed phase seems to stabilise the film flow, whereas in churn-annular flow the opposite seems to be true.     

Effect of secondary flow on droplet distribution and deposition in horizontal annular pipe flow

In horizontal annular dispersed pipe flow the liquid film at the bottom is thicker and rougher than at the top of the pipe. A turbulent pipe flow experiencing a variation of roughness along the pipe wall will show a secondary flow. Such secondary flow, consisting of two counter-rotating cells in the cross-section of the tube, can change the distribution of the droplets inside the pipe and their deposition at the wall. Here, we compare the behaviour of the droplets (dispersed phase) with and without secondary flow, using large-eddy simulations. It is shown that the presence of secondary flow increases the droplet concentration in the core of the pipe and the droplet deposition-rate at the top of the pipe.