AB_2型星形杂臂偶氮液晶聚合物的合成及表征

通过原子转移自由基聚合(ATRP)与ATRP衍生物化学修饰结合的方法,合成了一系列AB2型星形杂臂偶氮液晶聚合物.其中,A为聚苯乙烯,B为聚6-[4-(4′-甲氧基苯基)偶氮苯氧基己酯](PMMAZO).合成分三步进行.首先,以ATRP方法得到ω-溴聚苯乙烯活性链PS(Br).然后对PS(Br)进行化学改性,得到带两个末端溴原子的聚苯乙烯活性链PS(Br)2·最后,以PS(Br)2作为双官能团大分子引发剂,引发6-[4-(4′-甲氧基苯基)偶氮苯氧基]己酯(MMAZO)发生ATRP聚合,得到星形杂臂PS(PMMAZO)2聚合物.进一步对聚合产物进行了GPC和1H-NMR分析.结果表明合成产物是预期的星形杂臂聚合物,产物分子量可控且分子量分布狭窄.同时,以DSC和POM表征了星形杂臂聚合物的液晶性.     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Low polydispersity star polymers via cross-linking macromonomers by ATRP

A new method for the synthesis of star polymers with high molecular weight and narrow molecular weight distribution (MWD) is presented. The star copolymers were prepared by atom transfer radical (co)polymerization (ATRP) of linear macromonomers with divinyl cross-linkers using low molar mass initiator. In contrast to prior "arm-first" procedures with macroinitiators, by using lower ratio of concentration of initiator to MM, the star polymers contained less initiating sites in the core, which decreased the extent of star-star coupling reactions and resulted in formation of star polymers with narrower MWD. Addition of more cross-linker and initiator during the reaction increased the star molecular weight and star yield while retaining the narrow MWD of the star polymer. For example, we synthesized a star polymer with molecular weight Mn = 466 000 g/mol and Mw/Mn < 1.2 in >98% yield.     

Synthesis of homo- amd block copolymer multi-armed methacrylic star polymers by triisobutylaluminium/tert-butlyllithium initiation

Methacrylate star polymers were prepared using the “arm-first” strategy of star polymer formation by the addition of ethylene glycol dimethacrylate to living linear poly(methacrylate) arms synthesised by a trialkylaluminium/alkyllithium initiating system Control over star molar mass is discussed for poly(methyl methacrylate) armed star polymers as is the preparation of star polymers with block copolymer arms.     

Synthesis of high‐order multiblock core cross‐linked star polymers

Core cross‐linked star (CCS) polymers with radiating arms composed of high‐order multiblock copolymers have been synthesized in a one‐pot system via iterative copper‐mediated radical polymerization. The employed “arm‐first” technique ensures the multiblock sequence of the macroinitiator is carried through to the star structure with no arm defects. The versatility of this approach is demonstrated by the synthesis of three distinct star polymers with differing arm compositions, two with an alternating ABABAB block sequence and one with six different block units (i.e. ABCDEF). Owing to the star architecture, CCS polymers in which the arm composition consists of alternating hydrophilic–hydrophobic (ABABAB) segments undergo supramolecular self‐assembly in selective solvents, whereas linear polymers with the same block sequence did not yield self‐assembled structures, as evidenced by DLS analysis. The combination of microstructural and topological control in CCS polymers offers exciting possibilities for the development of tailor‐made nanoparticles with spatially defined regions of functionality. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 135–143     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Arm‐first synthesis of star polymers with polywedge arms using ring‐opening metathesis polymerization and bifunctional crosslinkers

This work presents a two‐step, one‐pot process to make star polymers with polywedge arms. In a one‐pot reaction, after the polywedge arms are synthesized, crosslinker species are added to the reaction, rapidly forming star polymers. Crosslinker species with different degrees of conformational freedom were designed and synthesized and their capacity to generate star polymers was evaluated. Mass conversions up to 92% and stars with up to 17 arms were synthesized with the most rigid crosslinker. The effects of arm molecular weight and molar ratio of crosslinker to arm on mass conversion and arms per star were explored further. Finally, the size‐molecular weight scaling relationship for polywedges with linear and star architectures was compared, corroborating theoretical results regarding star polymers with arms much larger than their core. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 732–740     

Synthesis and characterization of shell-cross-linked polymer networks and large-core star polymers: Effect of the volume of the cross-linking mixture

Group transfer polymerization and sequential addition of monomer and cross-linker were employed for the preparation of two new polymer structures, one of a polymer network and the other of a star polymer. The synthesis was completed in two steps, involving the synthesis of linear methyl methacrylate (MMA) arms of degree of polymerization of 20, followed by their cross-linking using a mixture of MMA monomer and ethylene glycol dimethacrylate (EGDMA) cross-linker. In this study, the volume of the cross-linking mixture was varied systematically. Furthermore, two mixture compositions were employed, involving MMA:EGDMA molar ratios of 1:1 and 3:1, leading to two series of polymeric materials. It was found that at a given cross-linking mixture composition, a larger volume of the cross-linking mixture favored the formation of polymer networks, whereas a smaller volume favored the formation of star polymers. The linear precursors, the star polymers and the extractables from the polymer networks were characterized by gel permeation chromatography in tetrahydrofuran (THF). The absolute weight-average molecular weight, the number of arms and the hydrodynamic radii of the star polymers, as determined using static and dynamic light scattering in THF, respectively, and their average radii as determined by atomic force microscopy, increased as the volume of the cross-linking mixture increased. The gravimetrically measured degrees of swelling in THF, the network sol fraction and the percentage of branched polymer in the sol fraction decreased as the volume of the cross-linking mixture increased.     

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

Synthesis of cleavable multi-functional mikto-arm star polymer by RAFT polymerization: example of an anti-cancer drug 7-ethyl-10-hydroxycamptothecin (SN-38) as functional moiety

Multi-functional mikto-arm star polymers containing three different arms [hydrophilic, SN-38-P(OEGMA_8–9)₁₁, cationizable, SN-38-P(DMAEMA)₃₈ and hydrophobic, SN-38-P(BMA)₂₆] were prepared by RAFT polymerization via an arm-first approach using a cleavable cross-linker. The star polymers were cleaved to the linear arms with tributylphosphine as a reducing agent. The decrease in molecular weight observed is consistent with the initial stars having approximately five arms. Blue fluorescence was observed when a solution of mikto-arm star was irradiated under a 365 nm light proving the retention of the SN-38 moiety during star formation by RAFT polymerization. Thus these polymer-drug conjugates can be considered as potential delivery vehicles for cancer therapy. The P(DMAEMA) arms can be quaternized using iodomethane, allowing star polymers to bind negatively charged small interfering RNA (siRNA) and potentially be used as a carrier for that material.     

Novel well-defined star homopolymers and star-block copolymers of poly(n-hexyl isocyanate) by anionic polymerization

Anionic polymerization high-vacuum techniques and appropriate multifunctional initiators/additives were employed for the synthesis of novel star structures of poly(n-hexyl isocyanate) (PHIC). A new trifunctional initiator prepared by the reaction of tris(4-isocyanatophenyl)methane with benzyl sodium was used for the synthesis of three-arm star PHIC. Divinyl benzene and the core-first or the arm-first/core-first (in-out) approach were utilized for the synthesis of multiarm star homopolymers, (PHIC)_n, star-block copolymers, (PHIC-b-PI)_n, and miktoarm star copolymers, (PS)_n(PHIC)_n, where PS is polystyrene. The molecular characteristics obtained by size-exclusion chromatography, equipped with refractive index and two-angle light scattering detectors, nuclear magnetic resonance, spectroscopy, and dilute solution viscometry showed that well-defined structures were synthesized in this study. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2387–2399, 2007     

Miktoarm star copolymers via combination of RAFT arm‐first technique and aldehyde–aminooxy click reaction

A facile synthetic pathway to miktoarm star copolymers with multiple arms has been developed by combining reversible addition–fragmentation chain transfer (RAFT) arm‐first technique and aldehyde–aminooxy “click” coupling reaction. Star polystyrene (PS) with aldehyde functionalized core was initially prepared by RAFT arm‐first technique via crosslinking of the preformed linear macro‐RAFT agents using a newly designed aldehyde‐containing divinyl compound 6,6′‐(ethane‐1,2‐diylbis(oxy))bis(3‐vinylbenzaldehyde) (EVBA). It was then used as a multifunctional coupling agent for the subsequent formation of the second generation poly(ethylene glycol) (PEG) arms via the click coupling reaction between its aldehyde groups and aminooxy‐terminated PEGs. The possible formation of PS‐PEG miktoarm star copolymer with Janus‐like segregated structure in cyclohexanone was also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3323–3330, 2010     

Morphology and microphase separation of star copolymers

Star copolymers have attracted significant interest due to their different characteristics compared with diblock copolymers, including higher critical micelle concentration, lower viscosity, unique spatial shape, or morphologies. Development of synthetic skills such as anionic polymerization and controlled radical polymerization have made it possible to make diverse architectures of polymers. Depending on the molecular architecture of the copolymer, numerous morphologies are possible, for instance, Archimedean tiling patterns and cylindrical microdomains at symmetric volume fraction for miktoarm star copolymers as well as asymmetric lamellar microdomains for star‐shaped copolymers, which have not been reported for linear block copolymers. In this review, we focus on morphologies and microphase separations of miktoarm (A_mB_n and ABC miktoarm) star copolymers and star‐shaped [(A‐b‐B)_n] copolymers with nonlinear architecture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1–21     

Synthesis and Characterization of Star Polymer with Comb-like Poly(lauryl methacrylate) Arms by Atom Transfer Radical Polymerization via One-pot ‘Arm-First’ Method

Atom transfer radical polymerization (ATRP) was used to prepare core crosslinked star polymers with comb-like poly (lauryl methacrylate) (LMA) arms by one-pot “arm-first” method, involving the synthesis of comb-like PLMA arms, followed by their crosslinking, using a mixture of LMA monomer and ethylene glycol dimethacrylate (EGDMA) crosslinker. By adjusting the feeding time and level of EGDMA, a series of star-like polymers with various comb-like arms length and number can be obtained. The molecular architecture including radius of gyration (Rg), hydrodynamic radius (Rh) and intrinsic viscosity (η_i) etc. were characterized by a triple-detector gel permeation chromatography (GPC) equipped with a refractive index detector, viscometer detector and a multi-angle static laser light scattering (MALLS) detector. The thermal property and shearing stability of these star-like polymers were also investigated.     

Microphase separation in block CO- and terpolymers of novel macromolecular architectures

The synthesis of model miktoarm stars of the A₂B, A₃B, (AB)₂(BA)₂ and ABC (A:polyisoprene, B: polystyrene C: poly (methyl methacrylate)) was achieved by using anionic polymerization techniques and controlled chlorosilane chemistry. The microphase separation was studied by TEM, SAXS and image simulation. In the case of A₂B and A₃B miktoarm star copolymers, the morphology results are in agreement with the newly and after the experimental results developed theory of Milner. One of the symmetric in composition inverse block copolymers ((AB)₂(BA)₂) shows the OBDD morphology due to the special spatial arrangements of the arms. The first morphological results of ABC miktoarm star terpolymer show interesting future.     

Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology

A critical review: the ring-opening polymerization of cyclic esters provides access to an array of biodegradable, bioassimilable and renewable polymeric materials. Building these aliphatic polyester polymers into larger macromolecular frameworks provides further control over polymer characteristics and opens up unique applications. Polymer stars, where multiple arms radiate from a single core molecule, have found particular utility in the areas of drug delivery and nanotechnology. A challenge in this field is in understanding the impact of altering synthetic variables on polymer properties. We review the synthesis and characterization of aliphatic polyester polymer stars, focusing on polymers originating from lactide, ε-caprolactone, glycolide, β-butyrolactone and trimethylene carbonate monomers and their copolymers including coverage of polyester miktoarm star copolymers. These macromolecular materials are further categorized by core molecules, catalysts employed, self-assembly and degradation properties and the resulting fields of application (262 references).     

Synthesis of (AB)n‐, AnBn‐, and AxBy‐type amphiphilic and double‐hydrophilic star copolymers by RAFT polymerization

The synthesis, characterization, and postpolymerization functionalization of star copolymers by RAFT polymerization, using ethylene glycol dimethacrylate as the difunctional monomer for core formation via crosslinking, is presented in this work. The “arm first” approach was used for the synthesis of PDMAEMA_nPOEGMA_n double‐hydrophilic mikto‐arm stars and PDMAEMA_xPLMA_y amphiphilic miktoarm stars, while the “core first” approach was used for the synthesis of (PDMAEMA‐b‐POEGMA)_n double‐hydrophilic star block copolymers. Methyl iodide was used as the quaternizing agent for the transformation of the star copolymers into strong cationic star polyelectrolytes, through reaction on the dimethylamino groups of PDMAEMA blocks. The stars were characterized at the molecular level by SEC and proton nuclear magnetic resonance. Preliminary light scattering experiments, using THF and H₂O as the solvents, were performed in order to get information regarding the solution behavior of the novel star copolymers synthesized. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1771–1783     

An efficient synthetic route to well‐defined theta‐shaped copolymers

A series of well‐defined θ‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution have been successfully synthesized without any purification procedure by the combination of atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP), and the “click” chemistry. The synthetic process involves two steps: (1) synthesis of AB₂ miktoarm star copolymers, which contain one PCL chain terminated with two acetylene groups and two PS chains with two azido groups at their one end, (α,α′‐diacetylene‐PCL) (ω‐azido‐PS)₂, by ROP, ATRP, and the terminal group transformation; (2) intramolecular cyclization of AB₂ miktoarm star copolymers to produce well‐defined pure θ‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resultant intermediates and the target polymers. Their thermal behavior was investigated by DSC. The mobility decrease of PCL chain across PS ring in the theta‐shaped copolymers restricts the crystallization ability of PCL segment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2620–2630, 2009     

Characterization of hydrophilic networks synthesized by group transfer polymerization

Group transfer polymerization was used to synthesize several series of hydrophilic random and model networks. Cationic random networks were prepared both in bulk and in tetrahydrofuran (THF) using a monofunctional initiator and simultaneous polymerization of monomer and branch units, while a bifanctional initiator was employed in THF for the synthesis of model networks comprising basic or acidic chains. Upon polymerization of the monomer, the latter initiator gives linear polymer chains with two “living” ends, which are subsequently interconnected to a polymer network by the addition of a branch unit. Homopolymer network star polymers were also synthesized in THF by a one‐pot procedure. The synthesis involved the use of a monofunctional initiator and the four‐step addition of the following reagents: (i) monomer, to give linear homopolymers; (ii) branch unit, to form “arm‐first” star polymers; (iii) monomer, to form secondary arms and give “in‐out” star polymers; and, finally (iv) branch unit again, to interconnect the “in‐out” stars to networks. Different networks were prepared for which the degree of polymerization (DP) of the linear chains between junction points was varied systematically. For all networks synthesized, the linear segments, the “arm‐first” and the “in‐out” stars were characterized in terms of their molecular weight (MW) and molecular weight distribution (MWD) using gel permeation chromatography (GPC). The degrees of swelling of both the random and model networks in water were measured and the effects of DP, pH, and monomer type were investigated.     

Facile synthesis of star‐shaped copolymers via combination of RAFT and ring opening polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization and bifunctional sparteine/thiourea organocatalyst‐mediated ring opening polymerization (ROP) were combined to produce poly(L ‐lactide) star polymers and poly(L ‐lactide‐co‐styrene) miktoarm star copolymers architecture following a facile experimental procedure, and without the need for specialist equipment. RAFT was used to copolymerize ethyl acrylate (EA) and hydroxyethyl acrylate (HEA) into poly(EA‐co‐HEA) co‐oligomers of degree of polymerization 10 with 2, 3, and 4 units of HEA, which were in turn used as multifunctional initiators for the ROP of L ‐lactide, using a bifunctional thiourea organocatalytic system. Furthermore, taking advantage of the living nature of RAFT polymerization, the multifunctional initiators were chain extended with styrene (poly((EA‐co‐HEA)‐b‐styrene) copolymers), and used as initiators for the ROP of L ‐lactide, to yield miktoarm star copolymers. The ROP reactions were allowed to proceed to high conversions (>95%) with good control over molecular weights (ca. 28,000‐230,000 g/mol) and polymer structures being observed, although the molecular weight distributions are generally broader (1.3–1.9) than those normally observed for ROP reactions. The orthogonality of both polymerization techniques, coupled with the ubiquity of HEA, which is used as a monomer for RAFT polymerization and as an initiator for ROP, offer a versatile approach to star‐shaped copolymers. Furthermore, this approach offers a practical approach to the synthesis of polylactide star polymers without a glove box or stringent reaction conditions. The phase separation properties of the miktoarm star copolymers were demonstrated via thermal analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6396–6408, 2009