State‐state transitions for CCl2(X1A1, A1B1, a3B1) radical and collisional quenching of CCl2(A1B1 and a3B1) by O2, N2, NO,N2O,NH3, and various aminated molecules

CCl₂ free radicals were produced by a pulsed dc discharge of CCl₄ in Ar. Ground electronic state CCl₂(X) radicals were electronically excited to the A¹B₁ (0,4,0) vibronic state with an Nd:YAG laser pumped dye laser at 541.52 nm. Experimental quenching data of excited CCl₂(A¹B₁ and a³B₁) by O₂, N₂, NO, N₂O, NH₃, NH(CH₃)₂, NH(C₂H₅)₂, and N(C₂H₅)₃ molecules were obtained by observing the time‐resolved total fluorescence signal of the excited CCl₂ radical in a cell, which showed a superposition of two exponential decay components under the presence of quencher. The quenching rate constants k_A of CCl₂(A) state and k_a of CCl₂(a) state were derived by analyzing the experimental data according to a proposed three‐level model to deal with the CCl₂(X¹A₁, A¹B₁, a³B₁) system. The formation cross sections of complexes of electronically excited CCl₂ radicals with O₂, N₂, NO, N₂O, NH₃, and aminated molecules were calculated by means of a collision‐complex model. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 351–356, 2002     

Synthese und Struktur hochfunktionalisierter 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaborole

Synthesis and Structure of Highly Functionalized 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaboroles A series of differently substituted 2, 3‐dihydro‐1H‐1, 3, 2‐diazaboroles has been prepared by various methods. 1, 3‐Di‐tert‐butyl‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 7 ), 2‐isobutyl‐1, 3‐bis(1‐cyclohexylethyl)‐1H‐1, 3, 2‐diazaborole ( 8 ), 1, 3‐bis‐(1‐cyclohexylethyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 9 ) 1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2diazaborole ( 10 ) and 2‐bromo‐1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐1H‐1, 3, 2‐diazaborole ( 11 ) were formed by reaction of the corresponding 1, 4‐diazabutadienes with the boranes Me₃SiCH₂BBr₂, iBuBBr₂ and BBr₃ followed by reduction of the resulting borolium salts [R¹ = tBu, Me(cHex)CH, [Me(Et)Ph]C; R² = Me₃SiCH₂, iBu, Br] with sodium amalgam. Treatment of 11 and 12 with silver cyanide afforded the 2‐cyano‐1, 3, 2‐diazaboroles 13 and 14 . An alternative route to compound 8 is based on the alkylation of 2‐bromo‐1, 3, 2‐diazaborole 12 with isobutyllithium. Equimolar amounts of 13 and isobutyllithium give rise to the formation of 15 . The new compounds were characterized by ¹H‐, ¹³C‐, ¹¹B‐NMR, IR and mass spectra. The molecular structures of 7 and meso ‐10 were confirmed by x‐ray structural analysis.     

1, 4, 5, 6-Tetrahydro-ν-tetrazin-Derivate

1, 4, 5, 6-Tetrahydro-ν-tetrazin-Derivate The title compounds 2 and 13 are readily available from α-lithiated N-alkyl-nitrosoamines 1 (see Tables 1 and 2) which decompose at ? 73° to yield the N-oxides 2. The ESR. spectra of two derivatives 1 are recorded (Fig. 1), and tentative mechanisms are proposed for the head to head dimerizations ( la- 3- 4- 5- 2a and Scheme 1). Coupling of lithionitrosoamines with iodine (-6) and alternative decomposition routes of representatives of this class of organometallics with special substitution [equations (2)-(5)] are reported. The structures of the tetrazines are established by spectroscopic data [ESCA] (Fig. 2), IR., UV., ¹H- (cf. Fig. 9) and ¹³C-NMR., PE. (Scheme 2), by an X-ray analysis of 2a (Fig. 4-8 and Table 3), and by the chemical reactions. The crystal structure of 2a is a twisted boat with non planar terminal nitrogen atoms which reflects the electron repulsion in the 4-atom-6-electron N? N?N?N-system. Comparisons are made with 2-tetrazenes, the open chain analogues of 13 , wherever possible. Raney-Ni reductions of 2 or 13 gives diamines 14 to which is assigned the d, l-configuration through the ¹H-NMR. spectra of the aminals 7 and 15 . Neither the oxides 2 nor the tetrazines 13 undergo cycloaddition reactions [equation (6) and Section 4]. Compound 2a is dimerized to the bis (nitrosoamino)-2-tetrazene 18 by treatment with acid, Zn^II, Cu^I or iodomethane. 2a is oxidized at nitrogen to the ethylene diamine derivative 6a (through 20 , with H₂O₂), or at the CH₂-groups of the ring to give oxo-N-oxide 21 (with MnO₂ or the ring contracted oxo-tetrazoline-N-oxide 22 (with KMnO₄). Pyrolysis or photolysis of the dimethyl tetrahydrotetrazine 13a furnishes the trimer 26 of N-methylimine, but no diazetidine 27 . Silver and mercury complexes 29 are obtained from 13a , while Cr(CO)₅. THF does not furnish a complex as with azocompounds, but rather replaces N₂ in 13a by CO (→ 28). Oxidation with permanganate converts 13a into the oxalic acid derivative 30 with unchanged tetrazine structure.     

Aromaten-Komplexe mit Halbsandwich-Struktur: Die 1:1-Komplexe des Mesitylens mit SbCl3, SbBr3, BiCl3 und BiBr3

Arene Complexes with a Half-Sandwich Structure: The 1:1 Complexes of Mesitylene with SbCl₃, SbBr₃, BiCl₃, and BiBr₃ 1,3,5-Trimethylbenzene forms stable 1:1 complexes with SbCl₃, SbBr₃, BiCl₃, and BiBr₃ of the stoichiometry C₆H₃Me₃·EX₃ ( 1 – 4 ). According to the results of X-ray structure analyses of compounds 2 and 3 , one arene molecule is coordinated to each antimony or bismuth atom characterizing these adducts as half-sandwich species. To a good approximation the mesitylene molecules are centered over the metal atoms, but deviations from strict η⁶-hapticity are larger for antimony than for bismuth. – Despite some obvious analogies in many features of the structures, 2 and 3 are not isostructural. Differences appear with regard to the halogen bridging between the EX₃ moieties giving rise to the formation of two-dimensional networks (EX₃)_n covered above and below by mesitylene molecules. The structural and sequential principles of the layers differ in a characteristic way for 2 and 3 .     

Organylarsino-substituierte Schwefeldiimide: Die Kristallstrukturanalysen von 3, 7-Di-t-butyl-3H, 7H,-1λ4, 5λ4, 2, 4, 6, 8, 3, 7-dithiatetrazadiarsocin und Bis(diphenylarsino)schwefeldiimid

Organoarsino-Substituted Sulphur Diimides: Crystal Structure Analyses of 3, 7-Di-t-butyl-3H, 7H-1λ⁴, 5λ⁴, 2, 4, 6, 8, 3, 7-dithiatetrazadiarsocine and Bis (diphenylarsino)sulphur Diimide Reaction of the salt K₂SN₂ with organoarsenic chlorides leads to sulphur diimides containing organoarsino substituents at both ends. Single crystal X-ray structure analyses were carried out for two typical compounds, i.e. the cyclic eight-membered 3, 7-di-t-butyl-3H, 7H-1λ⁴, 5λ⁴, 2, 4, 6, 8, 3, 7-dithiatetrazadiarsocine ( 1a , prepared from K₂SN₂ and (t-Bu)AsCl₂ (1:1)) and the open-chain bis(diphenylarsino)sulphur diimide ( 2a , prepared from K₂SN₂ and Ph₂AsCl (1:2)). In both compounds the sulphur diimide groups are coplanar with their directly bound arsenic atoms. This coplanarity principle leads, in the case of 1a , to about conformation (mm2(C_2v) symmetry) of the eight-membered heterocycle; the t-butyl substituents occupy quasi equatorial positions. Small deviations from mm2 symmetry and torsions around the S?N bonds up to 12° can be explained as a consequence of the transnnular repulsion of the lone pairs at the arsenic atoms (As …As distance 3.683(1) Å). In the case of the open-chain S(N? AsPh₂)₂ ( 2a , 2(C₂) symmetry), a cis, cis configuration was found at the S?N double bonds which indicates As…As interaction. The As…As distance (3.379(1) Å) is shorter than in 1a and parallells a reduced interaction of the lone pairs at the As atoms. The S?N bond lenghts (1.517(5) Å in 1 a and 1.521(3) Å in 2a ) are characteristic of sulphur diimides withoug significant π-interaction with the substituents and correspond to S^IV?N double bonds.     

The X˜1A1, a˜3B1, a˜1B˜1, and B˜1A1 electronic states of SiH2

Four electronically low-lying states of silylene (SiH₂) have been studied systematically using high level ab initio electronic structure theory. Self-consistent field (SCF), two-configuration (TC) SCF, complete active space (CAS) SCF, configuration interaction with single and double excitations (CISD), and CASSCF second-order (SO) CI levels of theory were employed with eight distinct basis sets. The zeroth-order wave functions of the ground (X˜ ¹A₁ or 1 ¹A₁) and B˜ ¹A₁ (or 2 ¹A₁) excited states are appropriately described by the first and second eigenvectors of the TCSCF secular equations. The TCSCF-CISD, CASSCF, and CASSCF-SOCI wave functions for the B˜ ¹A₁ (or 2 ¹A₁) state were obtained by following the second root of the CISD, CASSCF, and SOCI Hamiltonian matrices. At the highest level of theory, the CASSCF-SOCI method with the triple zeta plus triple polarization augmented with two sets of higher angular momentum functions and two sets of diffuse functions basis set [TZ3P(2f,2d)+2diff], the energy separation (T₀) between the ground (X˜ ¹A₁) and first excited (a˜ ³B₁) states is determined to be 20.5 kcal/mol (0.890eV,7180cm⁻¹), which is in excellent agreement with the experimental T₀ value of 21.0 kcal/mol (0.910eV,7340cm⁻¹). With the same method the T₀ value for the a˜ ¹B₁−X˜ ¹A₁ separation is predicted to be 45.1 kcal/mol (1.957 eV,15780 cm⁻¹), which is also in fine agreement with the experimental value of 44.4 kcal/mol (1.925 eV,15530 cm⁻¹). The T₀ value for the B˜ ¹A₁−X˜ ¹A₁ separation is determined to be 79.6 kcal/mol (3.452 eV,27 840 cm⁻¹). After comparison of theoretical and experimental T₀ values for the a˜ ³B₁ and a˜ ¹B₁ states and previous studies, error bars for the B˜ ¹A₁ state are estimated to be ±1.5 kcal/mol (±525 cm⁻¹). The predicted geometry of the B˜ ¹A₁ state is r_e(SiH)=1.458 and θ_e=162.3^∘. The physical properties including harmonic vibrational frequencies of the B˜ ¹A₁ state are newly determined. Received: 10 March 1997 / Accepted: 2 April 1997     

The Representation of Electrical Conductances for Polyvalent Electrolytes by the Quint-Viallard Conductivity Equation. Part 3. Unsymmetrical 3:1, 1:3, 3:2, 4:1, 1:4, 4:2, 2:4, 1:5 1:6 and 6:1 Type Electrolytes. Dilute Aqueous Solutions of Rare Earth Salts, Various Cyanides and other Salts

Electrical conductivities of dilute aqueous solutions for unsymmetrical electrolytes of the type 3:1, 1:3, 3:2, 4:1, 1:4, 4:2, 2:4, 1:5 1:6 and 6:1 are reexamined in the framework of the Quint-Viallard conductivity equations, in order to obtain a uniform representation of their conductivities. The molar and equivalent limiting conductances were evaluated with ion association constants, which were treated as adjustable parameters. The derived values were compared with corresponding results from the literature. The following electrolytes are considered: rare earth (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er) halides, perchlorides, nitrates and sulfates; hexamminecobalt and tris-ethylenediaminecobalt halides, perchlorides, nitrates and sulfates; [Ni₂(trien)₃]Cl₄, [Pt(pn)₃]Cl₄, [Co₂(trien)₃]Cl₆; cyanides K₃[Fe(CN)₆], K₃[Co(CN)₆], M₃[W(CN)₈] with M=Na, K, Rb, Cs; Ca₂[Fe(CN)₆], K₄[Fe(CN)₆], K₄[Mo(CN)₈], K₄[W(CN)₈], K₄[Ru(CN)₈], (Me₄N)₄[Fe(CN)₆], (Pr₄N)₄[Fe(CN)₆], K₄[Mo(CN)₈], (Me₄N)₄[Mo(CN)₈], (Et₄N)₄[Mo(CN)₈] and (Pr₄N)₄[Mo(CN)₈]; phosphates Na₄P₂O₇, Na₄P₄O₁₂, Na₅P₃O₁₀, Na₆P₆O₁₈ and (Me₄N)₄P₄O₁₂.     

Die 3-(N,N-Dimethylamino)prop-1-enyl-Gruppe als Chelatligand in Organoindium-Verbindungen

The 3-(N,N-Dimethylamino)prop-1-enyl Group as a Chelate Ligand in Indium Organyls InBr₃ reacts with Me₂NCH₂CH?CHMgCl (molar ratio 1 : 2) to form (Me₂NCH₂CH?CH)₂InBr ( 1 ) as the first indium alkenyl compound with amino-functionalized alkenyl groups. The X-ray structure determination shows the formation of a chelate complex. 1 crystallizes in the orthorhombic space group Fddd with the unit cell parameters a = 14.904(2) Å, b = 17.140(1) Å and c = 21.035(2) Å. By reaction of Me₂InBr with Me₂NCH₂CH?CHMgCl (molar ratio 1 : 1) (Me₂NCH₂CH?CH)InMe₂ ( 2 ) is formed as a colorless, at room temperature liquid, monomeric compound. The n.m.r. and mass spectra are discussed.     

First Observation of an Inverse Ruddlesden‐Popper Series: (A3n+1ONn−1)Bin+1 with A = Sr,Ba and n = 1, 3

Single crystals ((Ba_0.78(1)Sr_0.22)₄O)Bi₂ and ((Ba_0.62(1)Sr_0.38)₁₀N₂O)Bi₄ were successfully prepared from melt beads of Ba, Sr, and Bi in nitrogen atmosphere with oxygen impurities. The phases can be prepared in single phase from the appropriate mixtures of alkaline‐earth metal, bismuth, and bismuth oxide upon heating in pure nitrogen atmosphere. ((Ba_0.78(1)Sr_0.22)₄O)Bi₂ crystallizes in the K₂NiF₄ structure type (space group I4/mmm, No. 139, a = 522.34(5) pm, c = 1844.0(2) pm, Z = 2, R_gt(F) = 0.039) with layers of vertex‐sharing octahedra ((Ba,Sr)_4/2Ba₂O). ((Ba_0.62(1)Sr_0.38)₁₀N₂O)Bi₄ crystallizes as an isotype of Sr₄Ti₃O₁₀ (space group I4/mmm, No. 139, a = 531.3(1) pm, c = 3983.2(4) pm, Z = 2, R_gt(F) = 0.050) containing slabs of three layers of vertex‐sharing octahedra further connected via corners. These compounds are interpreted in terms of members of an inverse Ruddlesden‐Popper series with the general formula n (A₃ON_n?1)Bi · ABi or (A_3n+1ON_n?1)Bi_n+1, respectively, with n = 1, 3. Partial order of the alkaline‐earth metal ions is analyzed.     

Metalated 1, 3‐Azaphospholes: η1‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)5 and μ2‐[(1, 3‐Benzazaphospholide‐P)(cyclopentadienide)nickel] Complexes

1H‐1, 3‐Benzazaphospholes react with M(CO)₅(THF) (M = Cr, Mo, W) to give thermally and relatively air stable η¹‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)₅ complexes. The ¹H‐ and ¹³C‐NMR‐data are in accordance with the preservation of the phosphaaromatic π‐system of the ligand. The strong upfield ³¹P coordination shift, particularly of the Mo and W complexes, forms a contrast to the downfield‐shifts of phosphine‐M(CO)₅ complexes and classifies benzazaphospholes as weak donor but efficient acceptor ligands. Nickelocene reacts as organometallic species with metalation of the NH‐function. The resulting ambident 1, 3‐benzazaphospholide anions prefer a μ₂‐coordination of the η⁵‐CpNi‐fragment at phosphorus to coordination at nitrogen or a η³‐heteroallyl‐η⁵‐CpNi‐semisandwich structure. This is shown by characteristic NMR data and the crystal structure analysis of a η⁵‐CpNi‐benzazaphospholide. The latter is a P‐bridging dimer with a planar Ni₂P₂ ring and trans‐configuration of the two planar heterocyclic phosphido ligands arranged perpendicular to the four‐membered ring.     

The Chemistry of Tetrafluoroallene： One－pot Synthesis of Trifluoromethylindolizines from 1,3－Diiodo－1,1,3,3－tetrafluoropropane by 1,3－Dipolar Cycloaddition

Heating a mixture of 1, 3-diiodo-1, 1, 3, 3-tetrafluoropropane (2), K2CO3, pyridinium bromides (3) in CH3CN at 65℃ for 10 h gives the corresponding trifluoromethylindolizines.     

Neue Synthesen von 1α,25-Dihydroxycholesterin

New Syntheses of 1α,25-Dihydroxycholesterol Five convergent syntheses of 1α,25-dihydroxycholesterol (2) essentially achieved by combining 1α-hydroxylated C_21? and C_22?steroids with C_4? or C_5?side-chain building blocks, are described. The l,3-bis(tetrahydropyranyloxy)pregnen-21-ol-Ptoluenesulfonate (4) was used as a C_22?unit in three approaches involving sulfone 24 as a C_4?, sulfone 43 and 2-propynyl ether 49 as C_5?side-chain building blocks. In a further preparation, the 1,3-diacetoxypregnen-21 -al 5 and the phosphorane 59 , a C_22? and a C_5?unit, respectively, were connected. For the last one, the 1,3-bis(tetrahydropyranyloxy)pregnen-20-one (6) , a C_2l?unit and the C_5?phosphorane building block 66 were chosen. Furthermore, new routes for the preparation of the 3-hydroxy-27-norcholestenone (29) and of 25-hydroxycholesterol (3) are described for which the p-toluenesulfonates 21 and 23 served as the steroidal units and the sulfones 24 and 43 , respectively, as the side chain fragments. Finally, the 1,3-diacetoxypregnen-21-al (5) and the C5-phosphorane unit 60 gave a novel approach to 1α-hydroxycholesterol (53).     

Hydroformylation of 1, 1, 1-d3-2-butene. Isotope Effect on the Product Composition

In the hydroformylation of 1,1,1-trideuterio-2-butene with Rh₄ (CO)₁₂ the deuterated pentanals formed contain 75% of 5,5,5-trideuterio-pentanal, the rest being substantially 2,2-dideuterio-pentanal. On the contrary, using Co₂ (CO)₈ as the catalyst precursor, position 1 and 4 are formylated to the same extent.     

Synthesis,Structure, and Characterization of [FeIIILCl3] (L = 1, 4, 8‐Triazacycloundecane, 1, 4, 7‐Triazacyclononane)

The structures of [Fe^III(tacud)Cl₃] ( 1 ) and [Fe^III(tacn)Cl₃] ( 2 ) (tacud = 1, 4, 8‐triazacycloundecane, tacn = 1, 4, 7‐triazacyclononane) are reported. Both compounds crystallize in the orthorhombic space group Pnma with a = 12.5570(9), b = 12.0028(9), c = 8.2577(6) Å, V = 1244.59(16) ų, and Z = 4 for 1 and a = 12.095(4), b = 11.125(4), c = 7.963(3) Å, V = 1071.5(6) ų, and Z = 4 for 2 . The structures of 1 and 2 feature iron(III) in distorted octahedral arrangement with three facially coordinated nitrogen ligands and three chlorides. Bidirectional intermolecular hydrogen bonding between N–H groups and coordinated chlorides is seen for 1 and 2 . Compound 1 is the first example of iron(III) bonded to tacud and compound 2 is only the second structure reported of a 1:1 complex between iron and tacn. The Fe^3+/2+ redox couple for 1 is observed at E_1/2 = 0.25 V (ΔE_p = 99 mV), and for 2 at E_1/2 = 0.09 V (ΔE_p = 108 mV) versus NHE in DMF at 298 K. Comparison of structural, magnetic, and electrochemical properties for 1 and 2 reveal subtle differences consistent with the stronger coordinating properties of tacn relative to tacud.     

Oxidation and nitrosation of 4-(3-alkylureido)-2, 2, 6, 6-tetramethylpiperidine-1-oxyls to 4-(3-alkyl-3-nitrosoureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium salts

4-(3-Alkylureido)-2, 2, 6, 6-tetramethylpiperidine-1-oxyls are rapidly oxidized by N₂O₄ or NOCl to 4-(3-alkylureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium nitrates and chlorides, which are then nitrosated to 4-(3-alkyl-3-nitrosoureido)-2, 2, 6, 6-tetramethyl-1-oxopiperidinium salts. The perchlorates of the latter were prepared by an exchange reaction with HClO₄. The nitrosation of alkylureidooxoammonium salts is the first example of chemical modification of oxoammonium derivatives in which the highly reactive >N⁺=O group is inert toward the reagent.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 542–547, March, 1993.     

Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution

To improve the electrochemical properties of Li[Ni_1/3Co_1/3Mn_1/3]O₂ at high charge end voltage (4.6 V), a series of the mixed transition metal compounds, Li(Ni_1/3Co_{1/3 − x} Mn_1/3M _x )O₂ (M = Mg, Cr, Al; x = 0.05), were synthesized via hydroxide coprecipitation method. The effects of doping Mg, Cr, and Al on the structure and the electrochemical performances of Li[Ni_1/3Co_1/3Mn_1/3]O₂ were compared by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. The XRD results show that all the samples keep layered structures with R3m space group as the Li[Ni_1/3Co_1/3Mn_1/3]O₂. SEM images show that all the compounds have spherical shapes and the Cr-doped sample has the largest particle size. Furthermore, galvanostatic charge–discharge tests confirm that the Cr-doped electrode shows improved cycling performance than the undoped material. The capacity retention of Li(Ni_1/3Co_{1/3 − 0.05}Mn_1/3Cr_0.05)O₂ is 97% during 50 cycles at 2.8∼4.6 V. The improved cycling performance at high voltage can be attributed to the larger particle size and the prevention of charge transfer resistance (R _ct) increase during cycling.     

Cyclische Diazastannylene. XIX. Zur Reaktion eines Bis(amino)germylens, -stannylens und -plumbylens mit Phosphortrichlorid und 2, 3-Dimethyl-1, 3-butadien

Cyclic Diazastannylenes. XIX. Reaction of a Bis(amino)germylene, -stannylene, and -plumbylene with Phosphorus Trichloride and 2, 3-Dimethyl-1, 3-butadiene The cyclic bis(amino)germylene 1 reacts with PCl₃ by a threefold insertion into the P? Cl bonds and forms [Me₂Si(N^tBu)₂Ge(Cl)]₃P( 4 ). 4 crystallizes in the triclinic space group P1 with cell dimensions: a = 1955.2(9), b = 1378.3(6), c = 1074.3(5) pm, α = 90.4(1), β = 121.6(1), γ = 97.9(1)° and Z = 2. X-ray structure analysis was used to show, that the molecule 4 has approximately C_3h point symmetry. All germanium, chlorine, and silicon atoms are quite accurately situated in a plane, perpendicular to which the GeN₂Si-rings are erected. The only heavy atom which disturbs the mirror symmetry is the phosphorus, which is on the top of a flat pyramide (Ge? P? Ge = 115.0°). Important bond lengths (mean values) are: Ge? P = 231.0(4), Ge? N = 182.4(7), Ge? Cl = 217.9(2) and Si? N = 173.6(7) pm. The unusual nearly planar coordination of the phosphorus atom can be explained by the particular steric requirements of the substituents. PCl₃ oxidizes the tin atom in the bis(amino)stannylene 2 by the formation of Me₂Si(N^tBu)₂SnCl₂ ( 5 ); as additional product originates an amorphous solid of analytical composition (PCl)_n. In contrast to 1 and 2 the lead atom     

Acyl- und Alkylidenphosphane. XXIV. (N,N-Dimethylthiocarbamoyl)trimethylsilylphosphane und 1,2-Di(tert-butyl)-3-dimethylamino-1-thio-4-trimethylsilylsulfano-1λ5,2λ3-diphosphet-3-en

Acyl- and Alkylidenephosphines. XXIV. (N,N-Dimethylthiocarbamoyl)trimethylsilyl-phosphines and 1.2-Di(tert-butyl)-3-dimethylamino-1-thio-4-trimethylsilylsulfano-1λ⁵, 2λ³-diphosphet-3-ene In contrast to bis(trimethylsilyl)phosphines R? P[? Si(CH₃)₃]₂ 1 {R ? H₃C a ; (H₃C)₃C b ; H₅H₆ c ; H₁₁C₉ d ; (H₃C)₃Si e }, the more nucleophilic lithium trimethylsilylphosphides 4 react with N,N-dimethylthiocarbamoyl chloride already at ?78°C to give (N,N-dimethylthiocarbamoyl)trimethylsilylphosphines 2 . Working up the reaction, a dismutation of the mesityl derivative 2d is observed, whereas the tert-butyl compound 2b dissolved in toluene, eliminates dimethyl(trimethylsilyl)amine to form 1,2-di(tert-butyl)-3-dimethylamino-1-thio-4-trimethylsilyl-sulfano- 1λ⁵, 2λ³-diphosphet-3-ene 6b , nearly quantitatively within several days at +20°C.     

Structural Study of Alkaline 1-Phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate Salts: An Example of Periodicity in Alkaline Cations

The alkaline 1-phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate salts, M[C₆H₅N₄CS] (M = Li ( 1 ), Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 )) were obtained and characterized by means of mass spectrometry (FAB⁺) and NMR (¹H; ¹³C) spectroscopy. The structures of Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 ) compounds were determined by X-ray diffraction methods. The ligand shows a rich variety of coordination patterns with the alkaline cations. The formation of a four-membered ring MSCN in the compounds with heavier alkali cations (K, Rb and Cs) is shown. In all the cations the coordination number around it increases with the ionic radius. Compounds with Cs⁺ and Rb⁺ exhibited the formation of Cs-C and Rb-C interactions with the phenyl group.     

Self-assembly of 1-D and 3-D transition-metal coordination polymers based on 4-(1H-l,3-benzimidazol-2-yl)pyridine 1-oxide

Three metal-organic coordination polymers based on 4-(1H-l,3-benzimidazol-2-yl)pyridine 1-oxide (BImPyO) with the molecular structures [Cu₂(C₁₂H₈N₃O)₂]_n (1), [Cu(C₁₂H₈N₃O)]_n (2), and [Zn(C₁₂H₈N₃O)Cl]_n (3) were synthesized under hydrothermal conditions. They showed diverse coordination modes and were further characterized by elemental analysis, infrared spectroscopy, and single crystal X-ray structure analysis, respectively. In 1 and 2, BImPyO generated a 1-D chain by adopting μ₂-kN?:?kN′ coordination to bridge two Cu(II) ions with bis-N-chelation. In 3, by adopting μ₃-kN?:?kN′:kO coordination, BImPyO bridged three crystallographically independent Zn(II) ions to form a 3-D framework; 3 exhibits strong fluorescent emission in the solid state at room temperature.