Cerium(III/IV) and Cerium(IV)–Titanium(IV) Citric Complexes Prepared in Ethylene Glycol Medium

Summary. Cerium(III/IV) and Ce(IV)–Ti(IV) citric complexes were synthesized in ethylene glycol medium under conditions similar to those of the polymerized complex method (PCM). Solution phase ¹H, ¹³C NMR, solid state ¹³C CP MAS NMR and IR spectroscopy, and X-ray powder diffractometry were used to characterize the composition and structure of the synthesized products. Thermal decomposition of the isolated complexes was studied and a scheme of the processes taking place is proposed. Complexes of Ce(III) can be prepared at low temperature (40°C), only. In the presence of Ti(IV) ions, the oxidation takes place even at this temperature. A mixed-metal nature of the Ce(IV)–Ti(IV) complexes is established. The comparison between their composition and the one of analogous lanthanide(III)–Ti(IV) citrates contributes to the elucidation of the complexation process mechanism in the case of the PCM application. The increased charge of the complexation agent in the Ce⁴⁺–Ti⁴⁺ complex (in comparison with Ln ³⁺–Ti⁴⁺ citrates) is “compensated” by the increase of the relative number of the ligands with deprotonated OH group.     

Reaction of Hexamethyldisilazane with Borane in Tetrahydrofuran

Hexamethyldisilazane 1 reacts with borane in tetrahydrofuran (THF? BH₃, 2 ) first by formation of an adduct (Me₃Si)₂NH? BH₃ ( 3 ), and then either to the N,N-bis-(trimethylsilyl)-μ-aminodiborane 5 or to the mixture of 5 and N-trimethylsilyl-μ-aminodiborane(6) 6 , depending on the reaction conditions. The compounds 5 and 6 can be quantitatively converted to the N,N′,N″-tris(trimethylsilyl)borazine 4 . Three intermediates can be identified, namely N,N-bis(trimethylsilyl)borane 7 , N,N-bis(trimethylsilyl)amino(N′-trimethylsilylamino)borane 8 and N-trimethylsilylaminoborane-trimer. All products and intermediates were characterized by multinuclear NMR spectroscopy, and coupling constant ¹J(²⁹Si, ¹⁵N) were measured from ²⁹Si NMR spectra by using the Hahn-echo-extended (HEED) INEPT pulse sequence.     

Synthesis,characterization and ionic conductivity of poly[(oligoethylene oxide) ethoxysilane] and poly[(oligoethylene oxide) ethoxysilane]/(EuCl3)0.67

Poly[(oligoethylene oxide) ethoxysilane)] ( I ) and poly[(oligoethylene oxide) ethoxysilane)]/(EuCl₃)_0.67 ( II ) were synthesized by reacting tetraethoxysilane with oligo(ethylene glycol) of molecular weight 400 and oligo(ethylene glycol)400/(EuCl₃)_0.317, respectively. The products so obtained are very transparent and rubbery. By Fourier transform infrared and Raman spectroscopy studies and by using analytical results it was concluded that these products are crosslinked macromolecular materials where the Si atom is bonded to one OEt group and to three poly(ethylene oxide) 400 chains. Scanning electronic microscopy studies showed that the presence of EuCl₃ in polymer host significantly affects the morphology of the material. Laser luminescence investigations on (II) showed that Eu³⁺ ion in the polymer host is accommodated in two different types of sites having a distorted C_2v symmetry. Moreover, the ionic conductivity of these systems was investigated and the data were satisfactorily fitted by the empirical Vogel Tamman Fulcher equation. At 70°C the conductivities of ( I ) and ( II ) were 9 × 10⁻⁶ and 14.3 × 10⁻⁶ Ω⁻¹ cm⁻¹ respectively.     

Reactivity of 4‐thiothymidine with Fenton reagent investigated by UV‐visible spectroscopy and electrospray ionization mass spectrometry

The reactivity of the sulfur‐containing nucleoside 4‐thio‐(2′‐deoxy)‐thymidine usually abbreviated as 4‐thio‐thymidine, (S⁴‐TdR) under Fenton conditions, ie, in the presence of H₂O₂ and catalytic amounts of Fe(II), was investigated by UV‐vis spectroscopy and electrospray ionization single and tandem mass spectrometry (ESI‐MS and MS/MS). S⁴‐TdR hydroxylated on the S atom was found to be a key reaction intermediate, ultimately leading to (2′‐deoxy)‐thymidine usually abbreviated as thymidine, (TdR) as the main reaction product. This finding was in accordance with the outcome of the reaction between S⁴‐TdR and H₂O₂, previously investigated in our laboratory. On the other hand, the additional presence of ?OH radicals, induced by the Fe(II)/H₂O₂ combination, led to the increased generation of another interesting S⁴‐TdR product, already observed after its reaction with H₂O₂ alone, ie, the covalent dimer including a S? S bridge between two S⁴‐TdR molecules. More importantly, multihydroxylated derivatives of S⁴‐TdR and TdR were detected as peculiar products obtained under Fenton conditions. Among them, a product bearing an OH group both on the methyl group linked to the thymine ring and on the C5 atom of the ring was found to prevail. The results obtained during this study, integrated by those found previously in our laboratory, indicate 4‐thiothymidine as a promising molecular probe for the recognition, through a careful characterization of its reaction products, of the prevailing species among reactive oxygen species (ROS) corresponding to singlet‐state oxygen, hydrogen peroxide, and hydroxylic radical.     

Oxidation of Plasmalogen,Low‐Density Lipoprotein and RAW 264.7 Cells by Photoactivatable Atomic Oxygen Precursors

The oxidation of lipids by endogenous or environmental reactive oxygen species (ROS) generates a myriad of different lipid oxidation products that have important roles in disease pathology. The lipid oxidation products obtained in these reactions are dependent upon the identity of the reacting ROS. The photoinduced deoxygenation of various aromatic heterocyclic oxides has been suggested to generate ground state atomic oxygen (O[³P]) as an oxidant; however, very little is known about reactions between lipids and O(³P). To identify lipid oxidation products arising from the reaction of lipids with O(³P), photoactivatable precursors of O(³P) were irradiated in the presence of lysoplasmenylcholine, low‐density lipoprotein and RAW 264.7 cells under aerobic and anaerobic conditions. Four different aldehyde products consistent with the oxidation of plasmalogens were observed. The four aldehydes were: tetradecanal, pentadecanal, 2‐hexadecenal and hexadecanal. Depending upon the conditions, either pentadecanal or 2‐hexadecenal was the major product. Increased amounts of the aldehyde products were observed in aerobic conditions.     

4,5‐Dihydro‐1,2,3‐oxadiazole: A Very Elusive Key Intermediate in Various Important Chemical Transformations

4,5‐Dihydro‐1,2,3‐oxadiazoles are postulated to be key intermediates in the industrial synthesis of ketones from alkenes, in the alkylation of DNA in vivo, and in the decomposition of N‐nitrosoureas; they are also a subject of great interest for theoretical chemists. In the presented report, the formation of 4,5‐dihydro‐1,2,3‐oxadiazole and the subsequent decay into secondary products have been studied by NMR monitoring analysis. The elusive properties evading characterization have now been confirmed by ¹H, ¹³C, and ¹⁵N NMR spectroscopy, and relevant 2D experiments at very low temperatures. Our experiments with suitably substituted N‐nitrosoureas using thallium(I) alkoxides as bases under apolar conditions answer important questions on the existence and the secondary products of 4,5‐dihydro‐1,2,3‐oxadiazole.     

Benzenesulfonamidoquinolino‐β‐cyclodextrin as a Cell‐Impermeable Fluorescent Sensor for Zn2+

A water‐soluble benzenesulfonamidoquinolino‐β‐cyclodextrin has been successfully synthesized in 30 % yield by incorporating a N‐(8‐quinolyl)‐p‐aminobenzenesulfonamide (HQAS) group to β‐cyclodextrin through a flexible linker. This compound exhibits a good fluorescence response in the presence of Zn²⁺ in water but gives poor fluorescence responses with other metal ions commonly present in a physiological environment under similar conditions. Fluorescence microscopic and two‐dimensional NMR experiments showed that benzenesulfonamidoquinolino‐β‐cyclodextrin could bind to the loose bilayer membranes. As a result, benzenesulfonamidoquinolino‐β‐cyclodextrin was found to act as an efficient cell‐impermeable Zn²⁺ probe, showing a specific fluorescent sensing ability to Zn²⁺‐containing damaged cells whilst exhibiting no response in the presence of healthy cells.     

An Improved Method for the Preparation of Energetic Aminotetrazolium Salts

A straightforward way for the preparation of the energetic 5‐aminotetrazolium and 1, 5‐diaminotetrazolium salts is reported. The energetic salts were readily synthesized by the reaction of 5‐aminotetrazolium nitrate or 1, 5‐diaminotetrazolium nitrate with ammonium 5‐nitroiminotetrazolate, ammonium 1‐methyl‐5‐nitroiminotetrazolate, bis(ammonium) ethylene bis(5‐nitroiminotetrazolate), and diammonium iminobis(5‐tetrazolate), respectively, in water under mild conditions. All products were recovered as highly crystalline materials in excellent yields and purities, and were fully characterized by IR spectroscopy, ¹H and ¹³C NMR spectroscopy, DSC measurements as well as elemental analyses.     

New Insight into the Hydrocarbon‐Pool Chemistry of the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 from GC‐MS,Solid‐State NMR Spectroscopy,and DFT Calculations

Over zeolite H‐ZSM‐5, the aromatics‐based hydrocarbon‐pool mechanism of methanol‐to‐olefins (MTO) reaction was studied by GC‐MS, solid‐state NMR spectroscopy, and theoretical calculations. Isotopic‐labeling experimental results demonstrated that polymethylbenzenes (MBs) are intimately correlated with the formation of olefin products in the initial stage. More importantly, three types of cyclopentenyl cations (1,3‐dimethylcyclopentenyl, 1,2,3‐trimethylcyclopentenyl, and 1,3,4‐trimethylcyclopentenyl cations) and a pentamethylbenzenium ion were for the first time identified by solid‐state NMR spectroscopy and DFT calculations under both co‐feeding ([¹³C₆]benzene and methanol) conditions and typical MTO working (feeding [¹³C]methanol alone) conditions. The comparable reactivity of the MBs (from xylene to tetramethylbenzene) and the carbocations (trimethylcyclopentenyl and pentamethylbenzium ions) in the MTO reaction was revealed by ¹³C‐labeling experiments, evidencing that they work together through a paring mechanism to produce propene. The paring route in a full aromatics‐based catalytic cycle was also supported by theoretical DFT calculations.     

Characterization of the benzene-insoluble fraction of the hydrolyzate of phenyltrimethoxysilanes in the presence of benzyltrimethylammonium hydroxide

The insoluble fraction obtained from the hydrolysis and condensation of (4-dimethylamino-, 2-methyl-, and nonsubstituted)phenyltrimethoxysilanes in the presence of benzyltrimethylammonium hydroxide in benzene was characterized. IR, ¹H NMR, and ²⁹Si NMR suggested that the insoluble fraction was composed of RSi(O )₃, that is, a T³ structure. X-ray diffraction indicated the presence of a long-range ordered structure composed of a mixture of crystals. Raman spectroscopy strongly suggested a cage structure by the presence of a ring-opening vibration assignable to a cubic structure at 475–482 cm⁻¹. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4587–4597, 2004     

Online ATR-IR investigations and mechanistic understanding of the carbonylation of epoxides - the selective synthesis of lactones or polyesters from epoxides and CO

In situ ATR-IR spectroscopy is applied as a powerful tool to study the factors that control the reaction of epoxides with carbon monoxide in the presence of [Lewis acid]⁺[Co(CO)₄]⁻ salts. Based on these investigations, a consistent mechanistic scheme is presented, comprising the main lactone and polyester products and minor components, e.g., acetone and crotonic acid derivatives. β-Alkoxy-acyl-cobalttetracarbonyl species are shown to be key intermediates from which two reaction routes start in dependence of the applied Lewis acid (LA). Labile LA-alkoxy combinations favor a backbiting process of the oxygen function on the Co-acyl bond, primarily producing lactone products. More stable LA-alkoxy entities are unreactive toward PO conversion and afford a polymerization reaction after the addition of a nucleophile. In that case, the Lewis acid remains bonded to the chain end.     

Study of ultraviolet light and ozone surface modification of polypropylene

Chemical reactions of the surface of a polypropylene (PP) film in the presence of various combinations of ultraviolet light and ozone gas (UVO) conditions were studied. Exposure of the polymer surface was carried out in a laboratory-scale UVO reactor in which the following parameters could be varied: ozone concentration, wavelength of ultraviolet (UV) radiation, pulsed operation of the UV lamps, the treatment distance between the PP film and the lamps, and water vapor concentration. Advancing and receding contact angle measurements were used to monitor surface energy changes imparted by the treatment. Two spectroscopic techniques, X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance–Fourier transform infrared spectroscopy (ATR–FTIR), were used to monitor changes in the polymer surface chemistry. Oxidation of the PP surface is proposed to occur through two alternate mechanisms: (1) insertion of an O (¹D) atom to form ether linkages, or (2) hydrogen abstraction by O (³P), followed either by crosslinking or by reaction with oxygen species to form carbonyl and/or carboxyl functional groups. It was found that reaction 1 dominates initially, but that its rate is reduced by the formation of products from reaction 2. It appears that the ether functional groups produced by reaction 1 are responsible primarily for increased surface energy. Carbonyl, carboxyl, and hydroxyl groups formed in reaction 2 appear to have little additional effect on surface energy; it is proposed that these groups are involved strongly in intramolecular hydrogen bonding, thereby decreasing their availability to contribute to increased surface energy. High-energy UV radiation was found to play only a minor role in the surface modification of PP. Of the narrow range of ozone concentrations studied, no clear relationship was found to exist between ozone concentration and rate of modification of the surface; thus, the concentration of ozone must not affect the relative concentrations of products from the competing reactions. Increased surface oxidation and decreased contact angles were observed when the lamp-to-sample distance was minimized. The presence of water vapor during UVO treatment was found to lead to greater oxygen uptake after short-term treatments but did not result in increased surface energy. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2489–2501, 1999     

Selective melamine detection in multiple sample matrices with a portable Raman instrument using surface enhanced Raman spectroscopy-active gold nanoparticles

Melamine adulteration of food and pharmaceutical products is a major concern and there is a growing need to protect the public from exposure to contaminated or adulterated products. One approach to reduce this threat is to develop a portable method for on-site rapid testing. We describe a universal and selective method for the detection of melamine in a variety of solid matrices at the 100–200 μg L⁻¹ level by surface enhanced Raman spectroscopy (SERS) with gold nanoparticles. With minimal sample preparation and the use of a portable Raman spectrometer, this work will lead to field-based screening for melamine adulteration. Citrate coated gold nanoparticles (Au NPs) were investigated for both colorimetric and Raman-based responses. Several non-hazardous solvents were evaluated in order to develop a melamine extraction procedure safe for field applications. Au NP agglomerates formed by the addition of isopropanol (IPA) prior to sample introduction enhanced the Raman signal for melamine and eliminated matrix interference for substrate formation. The melamine Raman signal resulted in a 10⁵ enhancement through the use of Au NP agglomerates. To our knowledge, we have developed the first portable SERS method using Au NPs to selectively screen for the presence of melamine adulteration in a variety of food and pharmaceutical matrices, including milk powder, infant formula, lactose, povidone, whey protein, wheat bran and wheat gluten.     

Understanding the synthesis and reactivity of ADORable zeolites using NMR spectroscopy

Zeolites remain one of the most important classes of industrial catalysts used today, and with the urgent drive for the transition from petrochemical to renewable feedstocks, there is a renewed interest in developing new types of zeolite. Recent synthetic advances in the field have included the development of the assembly-disassembly-organisation-reassembly (ADOR) method. In this short review, we will discuss how solid-state NMR experiments can be used to probe the mechanism of the process by characterising the structure of the intermediates and products, show how ¹⁷O NMR spectroscopy can be used to probe the reactivity of ADORable zeolites and explain how this, in turn, can lead to fundamental questions of how zeolites behave in the presence of liquid water.     

Atmospheric Chemistry and Environmental Assessment of Inhalational Fluroxene

Smog chamber/gas chromatography techniques are used to investigate the atmospheric degradation of fluroxene, an anesthetic, through oxidation with OH and Cl radicals at 298 K and under atmospheric pressure of N₂ or air. The measured rate constants (k) are: k(fluroxene+OH^.)=(2.96±0.61)×10⁻¹¹ and k(fluroxene+Cl^.)=(1.62±0.19)×10⁻¹⁰ cm³ molecule⁻¹ s⁻¹. The only product detected after the oxidation of fluroxene with OH radicals is 2,2,2-trifluoroethyl formate (79 % and 83 % molar yield in the absence and presence of NOx, respectively). However, after oxidation with Cl radicals, the detected products are 2,2,2-trifluoroethyl formate (78 %), 2,2,2-trifluoroethyl-1-chloroacetate (5 %), and chloroacetaldehyde (4 %), in the absence of NOx, and 2,2,2-trifluoroethyl formate (93 %), 2,2,2-trifluoroethyl-1-chloroacetate (6 %), and chloroacetaldehyde (5 %), in the presence of NOx. The results indicate that, both in the absence and presence of NOx, the main fate of fluroxene is the addition of the oxidant to the double bond and, once the alkoxy radical is formed, the main decomposition pathway is by means of degradation. Moreover, it is expected that 2,2,2-trifluoroethyl formate is the only oxidation product able to actively contribute to climate change. To successfully assess the contribution of fluroxene to global warming, we measure the infrared spectra of fluroxene and 2,2,2-trifluoroethyl formate, and calculate the radiative efficiencies (REs) to be 0.27 and 0.28 W m⁻² ppbv⁻¹, respectively. In addition, the cumulative effect owing to the formation of 2,2,2-trifluoroethyl formate is investigated, and the direct, indirect, and net global-warming potentials are calculated by using the REs and lifetimes of fluroxene and 2,2,2-trifluoroethyl formate.     

Thermal Lens Spectroscopy for Quantitative Determination of a Cu(II) Complex With an 8-Aminoquinoline Derivative in Tap Water and Mining Wastewater Samples Using a Dual Beam Technique

Abstract

This article describes the quantitative determination of Cu(II) using thermal lens spectrometry. The chromogenic reaction involving Cu(II) and 5-(4-sulphophenylazo)-8-aminoquinoline in alkaline solution was studied in different experimental conditions such as pH, ligand concentration, methanol volume, and presence of interfering ions. A collinear dual beam set-up has been used for direct quantitation in water samples without a pre-concentration step. The optimized conditions provided a linear calibration in the concentration range from 3.0 to 15.0?×?10^?7?mol L^?1. The detection and quantitation limits were 6.13?×?10^?8? and 2.04?×?10^?7?mol L^?1, respectively. Resultantly, an application to Cu(II) determination in tap water (recovery 99.8–103.3%) and mining (synthetic) wastewater (95.3–98.0%) shows relative SDs ≤ 3.1%. The method is presented as a new alternative for the direct Cu(II) determination in real samples.     

ESR spectra of products of oxidation of endometallofullerenes M@C82 (M = Y,La, Ce,Gd)

The ESR spectra of the products of oxidation of solutions and powders of Y@C₈₂ and La@C₈₂ with fuming sulfuric acid were studied. Based on the oxidation conditions and the sequence of spectral patterns, the spectra were attributed to the radical cations M@C₈₂ ⁿ⁺ (n = 2, 4), dimers M³⁺ ₂@C₁₆₄ ⁺, and polyendometallofullerenes.     

C?C Bond Formation via Carbon-Centered Radicals Generated from Dicarbonyl(η5-cyclopentadienyl) organoiron Complexes

Irradiation of benzyldicarbonyl(η⁵-cyclopentadienyl)iron complex ( 2 ) leads to hemolytic cleavage of the Fe? C bond. In the presence of activated alkenes, radical addition occurs and both saturated and unsaturated addition products 7–9 are formed. Photolysis of alkyliron complexes 2 , 3 and 20 in the presence of acrylonitrile leads to the same products as the irradiation of the respective acyliron complexes 28–30 . This indicates that, under photolytical conditions, alkyl and acyl complexes are in equilibrium with each other.     

Eine Methode zur ldentifizierung von Gitter-Leerstellen in Zeolithen

A Method for the Identification of T-Atom Vacancies in the Lattices of Zeolites Silanol groups in the lattices of zeolites can be silylated with trimethylchlorosilane and the products can be characterized by means of ²⁹Si (CP) MAS NMR. T-atom vacancies are indicated by the formation of silylation products with three or four siloxy-linkages under mild reaction conditions as this requires the presence of three or silanol groups in favourable geometrical arrangements.     

Characterization of degradation products of poly[(3,3,3-trifluoropropyl)methylsiloxane] by nuclear magnetic resonance spectroscopy, mass spectrometry and gas chromatography

Poly[(3,3,3-trifluoropropyl)methylsiloxane] (PTFPMS) was treated with the solvents acetone, ethyl acetate and methanol and its degradation products were analyzed with multiple techniques. ¹H, ²⁹Si and ¹⁹F nuclear magnetic resonance (NMR) spectroscopy were useful for the characterization of the intact polymers and for the determination of cyclosiloxanes. Cyclosiloxanes with a ring size of up to 23 were quantified by gas chromatography. The only degradation products found were TFPmethyl-cyclosiloxanes. 1,3,5,7-Tetrakis(TFPmethyl)-cyclotetrasiloxane was predominant, and (TFPmethyl)cyclotri-, penta- and hexasiloxane could be detected at lower concentrations. The identity of cyclic degradation products with a ring size of up to 6 was unambiguously confirmed by direct infusion mass spectrometry. The TFPmethyl-cyclosiloxanes were successfully ionized by electrospray ionization in the negative mode. None of the techniques applied gave hints to other degradation products such as short linear oligomers. Almost complete degradation of PTFPMS occurred in acetone and methanol, while degradation is distinctly reduced in ethyl acetate.