Rigid Nanoporous Urea-Based Covalent Triazine Frameworks for C2/C1 and CO2/CH4 Gas Separation

C2/C1 hydrocarbon separation is an important industrial process that relies on energy-intensive cryogenic distillation methods. The use of porous adsorbents to selectively separate these gases is a viable alternative. Highly stable covalent triazine frameworks (urea-CTFs) have been synthesized using 1,3-bis(4-cyanophenyl)urea. Urea-CTFs exhibited gas uptakes of C₂H₂ (3.86 mmol/g) and C₂H₄ (2.92 mmol/g) at 273 K and 1 bar and is selective over CH₄. Breakthrough simulations show the potential of urea-CTFs for C2/C1 separation.     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

Preparation of activated carbons and their adsorption properties for greenhouse gases: CH4 and CO2

Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ?C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.     

A comparative study of CH4 and CF4 rf discharges using a consistent plasma physics and chemistry simulator

A self-consistent, one-dimensional simulator for the physics and chemistry of radio frequency (rf) plasmas was developed and applied for CH₄ and CF₄. The simulator consists of a fluid model for the discharge physics, a commercial Boltzmann equation solver for calculations of electron energy distribution fuction (EEDF), a generalized plasma chemistry code, and an interface module among the three models. The CH₄ and CF₄ discharges are compared and contrasted: CH₄ plasmas are electropositive, with negative ion densities one order of magnitude less than those of electrons, whereas CF₄ plasmas are electronegative, with ten times more negative ions than electrons. The high-energy tail of tire EEDF in CH₄, lies below both the Druyvensteyn and Maxwell distributions, whereas tire EEDF high-energy tail in CF₄ lies between the two. For CH₄, the chemistry model was applied for four species, namely, CH₄ CH₃ CH₂, and H, whereas for CF₄, five species were examined namely CF₄, CF₃, CF₂, CF, and F The predicted densities and profiles compare favorably with experimental data. Finally, the chemistry results were fedback into the physics model until convergence was obtained.     

A new and convenient synthesis of phendiones oxidated by KBrO3/H2SO4 at room temperature

<正>A new method is described to synthesize phendione derivatives from 1,10-phenanthrolines using potassium bromate and 60% sulfuric acid as oxidant,which was easily applicable to scale-up.The reaction conditions are mild and the yields are excellent.The target compounds have been characterized by ~1H NMR,and IR.     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.     

A simple and highly efficient method for the synthesis of chalcones by using borontrifluoride-etherate

Chalcones are secondary metabolites of terrestrial plants, precursors for the biosynthesis of flavonoids and exhibit various biological activities. Condensation of substituted acetophenones (2a-12a) with various aromatic aldehydes (1b-7b) in the presence of BF₃-Et₂O at room temperature gave chalcones in 75-96% yield.     

A novel approach for the one-pot synthesis of linear and angular fused quinazolinones

A convenient and inexpensive one step methodology has been developed for the synthesis of linear and angular fused quinazolinones. The protocol, which uses amino heterocycles and o-bromo benzyl/naphthyl bromides as reactants, CuI as catalyst, Cs₂CO₃ as base, l-proline as ligand, and DMF as solvent, proceeds via nucleophilic aromatic substitution of the N-heteroaromatic cationic intermediate followed by in situ aerial oxidation at the benzylic position to the quinazolinone scaffold.     

Direct synthesis of porous/hollow magnesium carbonate hydroxide spindly nanorods and their application in water treatment

Spindly Mg₅(CO₃)₄(OH)₂·4H₂O nanorods with porous and hollow nanostructures were synthesized in a water-in-oil reverse microemulsion system of cetyltrimethylammonium bromide (CTAB)/water/cyclohexane/n-pentanol. These nanorods were characterized by a number of physical techniques, including powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Comparison experiments showed that fundamental experimental parameters, such as the molar ratio of H₂O to CTAB and the concentration of reactants, were important in the morphological control of Mg₅(CO₃)₄(OH)₂·4H₂O nanostructures. The potential applications of the as-synthesized Mg₅(CO₃)₄(OH)₂·4H₂O nanorods in water treatment were also investigated.     

Ultrasound-promoted green approach for the synthesis of multisubstituted pyridines using stable and reusable SBA-15@ADMPT/H5PW10V2O40 nanocatalyst at room temperature

ABSTRACT

A facile one-pot protocol for the synthesis of 2-amino-3-cyanopyridins using SBA-15@Triazine/H₅PW₁₀V₂O₄₀ as an efficient catalyst under ultrasonic conditions has been developed. The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol- 1-yl)-1,3,5-triazine (ADMPT) linker. Then the nanohybrid was used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 2-amino-3-cyanopyridin derivatives from the reaction of aldehydes, malononitrile, cyclic ketones and ammonium acetate under ultrasound waves with good to excellent yields (79–95%) and in a short span of time. This nanocatalyst was characterized by using FT-IR, XRD, SEM, TEM, BET, and EDX techniques.     

Capillary electrophoresis procedure for the simultaneous analysis and stoichiometry determination of a drug and its counter-ion by using dual-opposite end injection and contactless conductivity detection: Application to labetalol hydrochloride

In this work, a capillary electrophoresis (CE) procedure was developed for the simultaneous determination of a pharmaceutical drug and its counter-ion, namely labetalol hydrochloride. For this purpose, an uncoated fused-silica capillary, a low conductivity background electrolyte (BGE) and a capacitively coupled contactless conductivity detector (C⁴D) were employed. This detection system is highly sensitive and enables detection of inorganic as well as organic ions unlike with direct UV detection. Moreover, to be able to simultaneously analyze the cationic drug (labetalol⁺) and its anionic counter-ion (Cl⁻) in the same electrophoretic run without the need of a coated capillary, a dual-opposite end injection was performed. In this technique, the sample is hydrodynamically injected into both ends of the capillary. This method is simple and easy to perform since the different injection steps are automated by the CE software.This novel CE-C⁴D procedure with dual-opposite end injection has been successfully validated and applied for the analysis of chloride content in an adrenergic antagonist (labetalol hydrochloride). Thus, the hereby developed method has been shown to enable fast (analysis time < 10 min), precise (repeatability of migration times < 0.7% and of corrected-peak areas < 3.3%; n = 6) and rugged analyses for the simultaneous determination of a pharmaceutical drug and its counter-ion.     

A new solvent system for the separation of Th4+, UO 2 2+ and Zr4+ in the presence of common anions by thin-layer chromatography

Summary A TLC method has been developed for separating Th⁴⁺, UO₂ ²⁺ and Zr⁴⁺ in the presence of some common anions using a dimethylamine/acetone/formic acid mobile phase. Capacity factors, separation factors and resolution for the separation of Th⁴⁺ from UO₂ ²⁺ have been evaluated. The effect of the pH of the sample on R_F values of Th⁴⁺, UO₂ ²⁺, Ni²⁺ and Cu²⁺ has also been examined.     

A simple and efficient method for the synthesis of highly substituted imidazoles using 3-aroylquinoxalin-2(1H)-ones

3-Aroylquinoxalin-2(1H)-ones were found to be hetero analogues of α-diketones for the efficient, one-pot, three component synthesis of 2,4,5-trisubstituted imidazoles and imidazo[1,5-a]quinoxalin-4(5H)-ones in boiling methanol. The key advantages of this process are high yields, ready availability and low cost of 3-aroylquinoxalin-2(1H)-ones and easy work-up and separation of the products by non-chromatographic methods. Furthermore, the presence of an ortho-iminoanilide fragment at position 4 of the imidazoles obtained has made it possible to produce 2-(imidazol-4-yl)benzimidazoles in almost quantitative yields.     

Liquid chromatography coupled to on-line post column derivatization for the determination of organic compounds: A review on instrumentation and chemistries

Analytical derivatization either in pre or post column modes is one of the most widely used sample pretreatment techniques coupled to liquid chromatography. In the present review article we selected to discuss the post column derivatization mode for the analysis of organic compounds. The first part of the review focuses to the instrumentation of post-column setups including not only fundamental components such as pumps and reactors but also less common parts such as static mixers and back-pressure regulators; the second part of the article discusses the most popular “chemistries” that are involved in post column applications, including reagent-less approaches and new sensing platforms such as the popular gold nanoparticles. Some representative recent applications are also presented as tables.