Patterning and photoluminescence of CdS nanocrystallites on silk fibroin fiber

CdS nanocrystallites could be formed and assembled into nanoparticle strings and hexagons on natural silk fibroin fiber (SFF) through a room-temperature bio-inspired process. Herein, the biomaterial SFF served as reactive substrate, not only provides the in situ formation sites for CdS nanocrystallites, but also directs the arrangement of nanocrystalline CdS simultaneously. The photoluminescence (PL) of the resulting nanocomposites CdS/SFF is investigated extensively. The PL peaks observed from CdS nanoparticle strings are similar to those of separate CdS nanoparticles, corresponding to the band-edge emission of their individual building blocks (QD-CdS). Moreover, CdS nanoparticle hexagons perform a red-shifted and broadened emission peak.     

High-affinity integration of hydroxyapatite nanoparticles with chemically modified silk fibroin

Hydroxyapatite (HA)-based nanocomposites were prepared by a co-precipitation method with silk fibroin (SF) serving as organic matrix. Silk fibroin was chemically modified with an alkali solution or an enzyme attempting to improve the interface between the mineral and the organic matrix. The influences of the alkali and enzyme pretreatments on microstructure and physicochemical properties of HA–SF composite were examined and compared. The results reveal that both the two kinds of pretreatments facilitate the formation of highly ordered three-dimensional porous network throughout the composites, increase the microhardness of the composite, and promote the preferential growth of HA crystallites along c-axis. Among all the as-prepared samples, the composite containing the enzyme pretreated SF shows desirable hierarchical microstructure with higher degree of organization and more uniform pore size distribution. Due to the enzyme pretreatment, HA crystallites undergo obvious changes in morphology from rod-like to␣whisker-like and in crystal growth towards more apparent epitaxy along c-axis. The alkali pretreatment induces the stronger chemical interactions between HA and SF and thus to strengthen the inorganic–organic interfacial adhesion. The newly developed HA–SF composites are expected to be attractive biomedical materials for bone repair and remodeling.     

In situ deposition of flower-like ZnO on silk fibroin fibers

In this paper, a convenient biomineralization technique has been developed to form and assemble flower-like zinc oxide (ZnO) on silk fibroin fiber (SFF). Therein, SFF functions as supporting substrate and reactive sites for the in situ generation of ZnO particles. The photoluminescence (PL) of the resulting nanocomposite ZnO/SFF is investigated extensively. The PL peaks are mainly in the visible region (red), which is different from the usual ZnO region (green and violet). As-prepared ZnO/SFF nanocomposites could be useful in the medical field, photoelectron transfer devices, biomolecular detection, and antibacterial agents.     

丝素氨基酸寡肽链生长过程中的尺寸效应

运用密度泛函理论,对甘氨酸丙氨酸依次交替组成的13 条丝素寡肽链进行结构优化,并计算了平均结合能、偶极矩,绘出寡肽链的振动红外光谱. 计算结果发现,随着寡肽链的生长,平均结合能单调变化,典型官能团的红外特征峰均发生频移. 但官能团的伸缩振动和弯曲振动表现出相反的红移和蓝移趋势. 揭示出丝素氨基肽链的物理化学性质在生长过程存在尺寸效应及各向异性. 该现象源于同类官能团之间的耦合效应,以及分子内氢键作用对伸缩振动和弯曲振动具有不同的影响. 关键词： 寡肽 红外光谱 尺寸效应 奇偶效应     

Silver nanoparticle coverage dependence of surface-enhanced Raman scattering

We report surface-enhanced Raman scattering (SERS) from 4-mercaptopyridine adsorbed on nanotextured silver surfaces as the coverage of silver is varied. The degree of surface enhancement is strongly dependent on silver coverage and correlated to the extinction of the surface at the Raman excitation wavelength, that extinction being determined by multiparticle surface plasmon resonances. The coverage dependence of the Raman intensity is consistent with signals being dominated by molecules at junctions inside nanoparticle aggregates where electromagnetic energy is localized into “hot spots” by interactions of the incident and scattered fields with the surface plasmons. The Raman intensity drops precipitously near the conductivity percolation threshold because these hot spots are destroyed when conducting paths allow plasmons to propagate. Our approach to substrate preparation provides clean surfaces with average enhancements ≥10⁷, an order of magnitude larger than typical for SERS. PACS 78.67.-n; 78.68.+m; 33.20.Fb     

In situ bioinspired synthesis of silver chloride nanocrystals on silk fibroin fibers

Silver chloride (AgCl) nanocrystals were formed and grown on silk fibroin fibers (SFFs) by a room-temperature process. Practically, the degummed SFFs were immersed into silver nitrate solution and sodium chloride solution in turn. The amino acids on the SFF surface were negatively charged in alkaline impregnant, providing locations to immobilize silver ions and form silver chloride seeds. AgCl nanocrystals can further grow into cubic AgCl nanocrystals with an edge of about 100 nm. The morphologies of the AgCl nanocrystals were mostly influenced by the concentration of sodium chloride solution and the special configurations of the SFFs. The target AgCl/SFF nanocomposites constructed by AgCl nanocrystals and substrate SFFs could be used as photocatalysts in water splitting and antibacterial agents. This work provides an important example in the introduction of natural biofibers to the synthesis of functional hybrid nanocomposites by a green and mild technique.     

The application with tetramethyl pyrazine for antithrombogenicity improvement on silk fibroin surface

Chuanxiongqin (tetramethyl pyrazine, TMPZ) is an active ingredient of the Chinese herb and was used to improve the anticoagulant activity of silk fibroin (SF). The side methyl of TMPZ was oxidized, and then linked to polyacrylic acid (PAA) via an ester bond. The prepared conjugate was further mixed with SF solutions at different ratios to make blend films. The resulting products were characterized by FTIR, UV spectrometer and X-ray photoelectron spectroscopy (XPS). The in vitro antithrombogenicity were evaluated by the activated partial thromboplastin time (APTT) and the prothrombin time (PT). It was shown that blend films had longer coagulation time than the pure SF film.     

Formation of silk fibroin nanoparticles in water-miscible organic solvent and their characterization

When Silk fibre derived from Bombyx mori, a native biopolymer, was dissolved in highly concentrated neutral salts such as CaCl₂, the regenerated liquid silk, a gradually degraded peptide mixture of silk fibroin, could be obtained. The silk fibroin nanoparticles were prepared rapidly from the liquid silk by using water-miscible protonic and polar aprotonic organic solvents. The nanoparticles are insoluble but well dispersed and stable in aqueous solution and are globular particles with a range of 35–125 nm in diameter by means of TEM, SEM, AFM and laser sizer. Over one half of the ɛ-amino groups exist around the protein nanoparticles by using a trinitrobenzenesulfonic acid (TNBS) method. Raman spectra shows the tyrosine residues on the surface of the globules are more exposed than those on native silk fibers. The crystalline polymorph and conformation transition of the silk nanoparticles from random-coil and α-helix form (Silk I) into anti-parallel β-sheet form (Silk II) are investigated in detail by using infrared, fluorescence and Raman spectroscopy, DSC, ¹³C CP-MAS NMR and electron diffraction. X-ray diffraction of the silk nanoparticles shows that the nanoparticles crystallinity is about four fifths of the native fiber. Our results indicate that the degraded peptide chains of the regenerated silk is gathered homogeneously or heterogeneously to form a looser globular structure in aqueous solution. When introduced into excessive organic solvent, the looser globules of the liquid silk are rapidly dispersed and simultaneously dehydrated internally and externally, resulting in the further chain–chain contact, arrangement of those hydrophobic domains inside the globules and final formation of crystalline silk nanoparticles with β-sheet configuration. The morphology and size of the nanoparticles are relative to the kinds, properties and even molecular structures of organic solvents, and more significantly to the looser globular substructure of the degraded silk fibroin in aqueous solution. It is possible that the silk protein nanoparticles are potentially useful in biomaterials such as cosmetics, anti-UV skincare products, industrial materials and surface improving materials, especially in enzyme/drug delivery system as vehicle.     

丝素蛋白在甲醇-水混合溶剂中构象变化的光谱学研究

应用圆二色谱、内源荧光和外源荧光探针研究了丝素蛋白在甲醇-水混合溶剂中的构象变化及机理。结果显示,在浓度低于30%(V/V)的甲醇-水混合溶剂中,处于无规卷曲状态的丝素蛋白可以通过疏水相互作用形成小的疏水区域,随着甲醇浓度的增加,丝素蛋白发生由无规卷曲向β-折叠的构象转变,削弱了疏水侧链的相互作用。分析表明,丝素蛋白的构象变化与溶剂体系的微观结构密切相关,其稳定性主要由肽键单元与混合溶剂中的分子簇之间的相互作用决定。低浓度的甲醇-水混合溶剂保持水固有的氢键结构,对丝素蛋白肽键单元的溶剂化和丝素蛋白构象的影响较小,而随着甲醇浓度的增加,溶剂结构出现由四面体结构的水分子簇向链状结构的甲醇分子簇的转变,丝素蛋白通过形成分子内氢键减少肽键单元与溶剂分子的接触,从而引发丝素蛋白的构象转变。     

Tubuliform silk protein: A protein with unique molecular characteristics and mechanical properties in the spider silk fibroin family

Orb–web weavers can produce up to six different types of silk and a glue for various functions. Tubuliform silk is unique among them due to its distinct amino acid composition, specific time of production, and atypical mechanical properties. To study the protein composing this silk, tubuliform gland cDNA libraries were constructed from three orb–weaving spiders Argiope aurantia, Araneus gemmoides, and Nephila clavipes. Amino acid composition comparison between the predicted tubuliform silk protein sequence (TuSp1) and the corresponding gland protein confirms that TuSp1 is the major component in tubuliform gland in three spiders. Sequence analysis suggests that TuSp1 shares no significant similarity with its paralogues, while it has conserved sequence motifs with the most primitive spider, Euagrus chisoseus silk protein. The presence of large side-chain amino acids in TuSp1 sequence is consistent with the frustrated β-sheet crystalline structure of tubuliform silk observed in transmission electron microscopy. Repeat unit comparison within species as well as among three spiders exhibits high sequence conservation. Parsimony analysis based on carboxy terminal sequence shows that Argiope and Araneus are more closely related than either is to Nephila which is consistent with phylogenetic analysis based on morphological evidence. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users. PACS 61.41; 87.14 Ee; 87.15 Cc     

Stability toward alkaline hydrolysis of B. mori silk fibroin grafted with methacrylamide

Bombyx mori silk fibroin fibers were grafted with methacrylamide (MAA) and characterized by Raman and infrared (IR) vibrational spectroscopy before and after hydrolysis in NaOH 5% to elucidate the possible interactions between the two components and the stability of the fibers toward alkaline hydrolysis. Upon grafting, the fibers underwent conformational rearrangements toward a more unordered state and lost orientation at weight gains higher than 60%. Vibrational spectroscopy disclosed the occurrence of intermolecular interactions (mainly hydrogen bonds) between B. mori silk fibroin and polyMAA in the grafted fibers, and the formation of covalent bonds has been explored. These strong interactions made the grafted fibers as a whole more stable toward alkaline hydrolysis because they prevented the solubilization of the polymer upon hydrolysis and made slower the transformation of its CONH₂ groups into COOH and COO⁻ groups. Upon hydrolysis, silk fibroin underwent an enrichment in the β‐sheet crystalline domains, because of the preferential removal of the unordered domains, which were more prone to the OH⁻ attack. IR and Raman spectroscopy proved valid techniques to investigate the degradation mechanism and kinetics of grafted silk fibroin fibers and so for designing high‐performing silk‐based materials. The A₇₃₁/A₁₀₀₄ Raman intensity ratio was proposed to spectroscopically evaluate the composition of the grafted samples; its value was found to linearly increase with weight gain (R² = 0.998), envisaging the possibility of using Raman spectroscopy as a routine analytical technique for qualitative and quantitative characterization of grafted industrial samples. Copyright © 2016 John Wiley & Sons, Ltd.     

The application with protocatechualdehyde to improve anticoagulant activity and cell affinity of silk fibroin

Protocatechualdehyde (PCA) is one of the effective ingredients extracted from Danshen (Radix Salviae Miltiorrhizae) and was employed to modify the silk fibroin (SF) by graft polymerization and surface adsorption. The surface composition of modified SF was characterized by attenuated total reflectance Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and UV spectrophotometer. The anticoagulant activity of modified SF was assessed by in vitro coagulation test and platelet adhesion measurement. The endothelial cell affinity was evaluated by a parallel plate flow chamber. The test results indicated that with the introduction of PCA into SF, the anticoagulant activity has been improved obviously. And the SF surface composition altered by PCA, but did not disturb its β-sheet conformation. Moreover, the adsorbed PCA on SF surface can enhance the endothelial cell affinity.     

High performance pentacene organic field-effect transistors consisting of biocompatible PMMA/silk fibroin bilayer dielectric

Pentacene organic field-effect transistors （OFETs） based on single- or double-layer biocompatible dielectrics of poly（methyl methacrylate） （PMMA） and/or silk fibroin （SF） are fabricated. Compared with those devices based on sin- gle PMMA or SF dielectric or SF/PMMA bilayer dielectric, the OFETs with biocompatible PMMA/SF bilayer dielectric exhibit optimal performance with a high field-effect mobility of 0.21 cm2/Vs and a current on/off ratio of 1.5 × 104. By investigating the surface morphology of the pentacene active layer through atom force microscopy and analyzing the elec- trical properties, the performance enhancement is mainly attributed to the crystallization improvement of the pentacene and the smaller interface trap density at the dielectric/organic interface. Meanwhile, a low contact resistance also indicates that a good electrode/organic contact is formed, thereby assisting the performance improvement of the OFET.     

Surface modification and properties of Bombyx mori silk fibroin films by antimicrobial peptide

The Bombyx mori silk fibroin films (SFFs) were modified by a Cecropin B (CB) antimicrobial peptide, (NH₂)-NGIVKAGPAIAVLGEAAL-CONH₂, using the carbodiimide chemistry method. In order to avoid the dissolution of films during the modification procedure, the SFFs were first treated with 60% (v/v) ethanol aqueous solution, resulting a structural transition from unstable silk I to silk II. The investigation of modification conditions showed that the surface-modified SFFs had the satisfied antimicrobial activity and durability when they were activated by EDC·HCl/NHS solution followed by a treatment in CB peptide/PBS buffer (pH 6.5 or 8) solution at ambient temperature for 2 h. Moreover, the surface-modified SFFs showed the smaller contact angle due to the hydrophilic antimicrobial peptides coupled on the film surface, which is essential for the cell adhesion and proliferation. AFM results indicated that the surface roughness of SFFs was considerably increased after the modification by the peptides. The elemental composition analysis results also suggested that the peptides were tightly coupled to the surface of SFFs. This approach may provide a new option to engineer the surface-modified implanted materials preventing the biomaterial-centered infection (BCI).     

Silver and gold nanoparticle coated membranes applied to protein dot blots

Detection and identification of low abundance biomarker proteins is frequently based on various types of membrane-based devices. Lowering of the protein detection limits is vital in commercial applications such as lateral flow assays and in Western blots widely used in proteomics. These currently suffer from insufficient detection sensitivity and low retention for small 2–5 kDa proteins. In this study, we report the deposition of two types of metal nanoparticles: gold colloids (50–95 nm diameter) and silver fractals onto a range of commonly used types of membranes including polyvinylidene fluoride (PVDF). Due to strong affinity of proteins to noble metals, such modified membranes have the potential to effectively capture trace proteins preventing their loss. The membranes modified by metal particles were characterized optically and by SEM. The membrane performance in protein dot blots was evaluated using the protein—fluorophore conjugates Deep Purple-bovine serum albumin and fluorescein—human serum albumin. We found that the metal nanoparticles increase light extinction by metals, which is balanced by increased fluorescence, so that the effective fluorescence signal is unchanged. This feature combined with the capture of proteins by the nanoparticles embedded in the membrane increases the detection limit of membrane assays.     

Comparative Raman spectroscopic analysis of orientation in fibers and regenerated films of Bombyx mori silk fibroin

This study is focused on the Raman spectroscopic analysis of degummed silk fibroin (SF) fibers and regenerated Bombyx mori silk fibroin films: a correlation was found between some spectral features related to the methylene deformation modes and the molecular orientation of the samples. Polarized Raman spectra on SF fibers were used to obtain the orientation distribution function of carbonyl groups along the protein backbone. The variation of the intensity ratio of 1400/1450 cm⁻¹ for the peaks attributed to the wagging and bending deformation modes of CH₂ groups with respect to the angular orientation of the fiber was measured and quantitatively correlated with the orientation distribution function of the carbonyl groups. Unpolarized Raman spectra were measured for regenerated silk fibroin films and lyophilized solutions. The variation of the intensity ratio of 1415/1455 cm⁻¹, which is related to the deformation modes of CH₂ groups in SF regenerated materials, was qualitatively related to the microstructural orientation of the samples observed by scanning electron microscopy (SEM), and to the presence of Silk I phase as suggested by the analysis of samples obtained in different casting conditions and also by the measurements on mechanically deformed films. The results obtained showed the utility of the spectroscopic intensity ratio of 1400/1450 cm⁻¹ for the rapid assessment of molecular orientation in silk fibers, which could be useful for quality and process control of regenerated silk‐based textiles. Moreover, the qualitative dependence of the intensity ratio of 1415/1455 cm⁻¹ was found to be sensitive to both the microstructural orientation and Silk I content of regenerated silk fibroin films, suggesting a possible correlation of this Raman marker of the Silk I phase with the degree of molecular order brought about by this polymorph. Copyright © 2006 John Wiley & Sons, Ltd.     

Size exclusion chromatography for analyses of fibroin in silk: optimization of sampling and separation conditions

A direct goal of this paper was to improve the methods of sample preparation and separation for analyses of fibroin polypeptide with the use of size exclusion chromatography (SEC). The motivation for the study arises from our interest in natural polymers included in historic textile and paper artifacts, and is a logical response to the urgent need for developing rationale-based methods for materials conservation. The first step is to develop a reliable analytical tool which would give insight into fibroin structure and its changes caused by both natural and artificial ageing. To investigate the influence of preparation conditions, two sets of artificially aged samples were prepared (with and without NaCl in sample solution) and measured by the means of SEC with multi angle laser light scattering detector. It was shown that dialysis of fibroin dissolved in LiBr solution allows removal of the salt which destroys stacks chromatographic columns and prevents reproducible analyses. Salt rich (NaCl) water solutions of fibroin improved the quality of chromatograms.     

Silver nanoparticle supported on halloysite nanotubes catalyzed reduction of 4-nitrophenol (4-NP)

The silver nanoparticles with about 10 nm diameter were immobilized onto the halloysite nanotubes (HNTs) via the in situ reduction of AgNO₃ by polyol process. The silver nanoparticles supported halloysite nanotubes (Ag/HNTs), with Ag content of about 11%, were used for the catalyzed reduction of 4-nitrophenol (4-NP) with NaBH₄ in alkaline aqueous solutions. The effect of the reduction of 4-NP catalyzed by the catalysts in the presence of variable concentration NaBH₄ was investigated. It was found that the reduction rate increased with the increasing of the amounts of NaBH₄. And the larger amounts of NaBH₄ reduced the induction time.     

Influence of grafting with acrylate compounds on the conformational rearrangements of silk fibroin upon electrospinning and treatment with aqueous methanol

Silk fabrics from Bombyx mori silkworm were grafted with 2‐hydroxyethyl methacrylate (HEMA) as well as a binary system of HEMA and 4‐hydroxybutyl acrylate (HBA) and then analysed by Raman and infrared (IR) spectroscopy to elucidate the interactions between the components and their possible conformational changes. The samples were then dissolved in trifluoroacetic acid and electrospun; the influence of the grafted polymers on the silk fibroin rearrangements upon these treatments was investigated by vibrational spectroscopy. Upon grafting, the fabrics underwent conformational rearrangements towards a more unordered state, although they kept their prevailing β‐sheet conformation; also the polymeric component underwent hydrogen bonding and backbone rearrangements upon interaction with silk fibroin and the occurrence of strong covalent bonds cannot be excluded. By immersing the as‐electrospun grafted and pure fibroin nanofibres (prevalently unordered) in aqueous methanol, they partially recovered the β‐sheet content observed in the corresponding starting fabrics; the percentage of recovery decreased along the series: pure silk > HEMA‐grafted silk > HEMA and HBA‐grafted silk. This trend suggests that the presence of the polyHEMA grafted component hinders the silk fibroin recrystallization into β‐sheet upon aqueous methanol treatment; moreover, the addition of the more sterically hindered HBA monomer in the grafting system further prevented this process. Copyright © 2016 John Wiley & Sons, Ltd.     

Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles

This study describes methods developed for reliable quantification of size- and element-specific release of engineered nanoparticles (ENP) from consumer spray products. A modified glove box setup was designed to allow controlled spray experiments in a particle-minimized environment. Time dependence of the particle size distribution in a size range of 10–500 nm and ENP release rates were studied using a scanning mobility particle sizer (SMPS). In parallel, the aerosol was transferred to a size-calibrated electrostatic TEM sampler. The deposited particles were investigated using electron microscopy techniques in combination with image processing software. This approach enables the chemical and morphological characterization as well as quantification of released nanoparticles from a spray product. The differentiation of solid ENP from the released nano-sized droplets was achieved by applying a thermo-desorbing unit. After optimization, the setup was applied to investigate different spray situations using both pump and gas propellant spray dispensers for a commercially available water-based nano-silver spray. The pump spray situation showed no measurable nanoparticle release, whereas in the case of the gas spray, a significant release was observed. From the results it can be assumed that the homogeneously distributed ENP from the original dispersion grow in size and change morphology during and after the spray process but still exist as nanometer particles of size <100 nm. Furthermore, it seems that the release of ENP correlates with the generated aerosol droplet size distribution produced by the spray vessel type used. This is the first study presenting results concerning the release of ENP from spray products.