Synthesis,phase formation,and thermal expansion of sulfate phosphates with the NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> structure

The NaFeZr(PO₄)₂SO₄ and Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 sulfate phosphates with the NaZr₂(PO₄)₃ (NZP) structure were synthesized and studied using X-ray diffraction, electron microprobe analysis, IR spectroscopy, and simultaneous differential thermal and thermogravimetric analysis. The phase formation and thermal stability of the compounds were studied by powder X-ray diffraction and DTA–TG. The Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 structure was refined by full-profile analysis. The structure framework is composed of randomly occupied (Fe,Zr)O₆ octahedra and (P,S)O₄ tetrahedra; the Pb²⁺ ions occupy extra-framework sites. The thermal expansion of Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 in the temperature range from–120 to 200°C was studied by temperature X-ray diffraction. In terms of the average linear coefficient of thermal expansion (α_av = 1.7 × 10^–6°C^–1), this compound can be classified as having low expansion. The combination of different tetrahedral anions (a phosphorus and a smaller sulfur one) in the NZP resulted in a decrease in the framework size and cavities and enabled the preparation of low-expansion sulfate phosphate with a smaller extra-framework cation (cheap Pb) instead of larger cations (Cs, Ba, Sr) used most often in the monoanionic phosphates.     

Synthesis of hydroxyapatite by hydrolysis of α-Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Conditions for hydroxyapatite (HAP) synthesis in aqueous solutions by hydrolysis of α-Ca₃(PO₄)₂ were studied. Temperature exerts a substantial effect on the rate of α-Ca₃(PO₄)₂ hydrolysis and also changes the morphology of the reaction products. At 40 °C, the plate-like intersecting (perpendicular to the surface of the initial particles) crystals of HAP grow. Their maximum size after the 24-h hydrolysis is 1–2 µm. Needle like HAP crystals are formed upon boiling of the suspension. The morphology observed for the HAP particles agrees well with the conclusions obtained by analysis of the kinetics of tricalcium phosphate hydrolysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 78–85, January, 2005.     

Synthesis and crystal structure of phosphate Ba<Subscript>1.5</Subscript>Fe<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Double phosphate Ba_1.5Fe₂(PO₄)₃ was synthesized and structurally studied. Single crystals were synthesized by the fusion method. Cubic crystals, Z = 4, space group P2₁3, a = 9.866(1) Å. This structure is built of polyhedrons of four types: PO₄ tetrahedrons, two virtually regular FeO₆ octahedrons, BaO₁₂ twelve-vertex polyhedrons, and BaO₉ nine-vertex polyhedrons. These polyhedrons share common oxygen vertices to form three-dimensional [Fe₂(PO₄)₃]_3∞ framework containing barium atoms in cavities.     

Synthesis and study of the phosphate Cs<Subscript>2</Subscript>Mn<Subscript>0.5</Subscript>Zr<Subscript>1.5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The new phosphate Cs₂Mn_0.5Zr_1.5(PO₄)₃ was synthesized for the first time and characterized by X-ray diffraction. Its crystal structure was refined in space group P2₁3, Z = 4 at 25°C (a = 10.3163(1) Å, V = 1097.93(1) ų), by the Rietveld method using the powder X-ray diffraction data. The structure is built of an octahedral-tetrahedral framework {[Mn_0.5Zr_1.5(PO₄)₃]^2?}_3∞ with cesium atoms being located in large cavities. The hydrolytic stability of the powdered phosphate containing ¹³⁷Cs radionuclide was studied. The minimum achieved ¹³⁷Cs leaching rate was 4 × 10^?8 g/cm₂ day.     

Synthesis,structure formation,and thermal expansion of A<Superscript>+</Superscript>M<Superscript>2+</Superscript>MgE<Superscript>4+</Superscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The compounds AMMgE(PO₄)₃ (A = Na, K, Rb, Cs; M = Sr, Pb, Ba; E = Ti, Zr) were synthesized by the sol–gel procedure followed by heat treatment and studied by X-ray diffraction, differential thermal and electron microprobe analysis, and IR spectroscopy. The phosphates crystallize in the kosnarite (KZr₂(PO₄)₃, space group \(R\bar 3\)) and langbeinite (K₂Mg₂(SO₄)₃, space group P2₁3) structural types. The structure of KPbMgTi(PO₄)₃ was refined by full-profile analysis (space group P2₁3, Z = 4, a = 9.8540(3) Å, V = 956.83(4) ų). The structure is formed by a framework of vertex-sharing MgO₆ and TiO₆ octahedra and PO₄ tetrahedra. The K and Pb atoms fully occupy the extra-framework cavities and are coordinated to nine oxygen atoms. A variable-temperature X-ray diffraction study of KPbMgTi(PO₄)₃ showed that the compound expands isotropically and refer to medium-expansion class (linear thermal expansion coefficients α _a = α _b = α _c = 8 × 10^–6°C^–1). The number of stretching and bending modes of the PO₄ tetrahedron observed in the IR spectra is in agreement with that predicted by the factor group analysis of vibrations for space groups \(R\bar 3\) and P2₁3. A structural transition from the cubic langbeinite to the rhombohedral kosnarite was found for CsSrMgZr(PO₄)₃. In the morphotropic series of ASrMgZr(PO₄)₃ (A = Na, K, Rb, Cs) the kosnarite–langbeinite transition occurs upon the Na → K replacement. The effect of the sizes and electronegativities of cations combined in AMMgE(PO₄)₃ on the change of the structural type was analyzed.     

Synthesis and crystal structure of phosphates A<Subscript>2</Subscript>FeTi(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> (A = Na,Rb)

Triple phosphates A₂FeTi(PO₄)₃ (A = Na, Rb) were synthesized by the solid-phase method and studied by electronic microscopy, electron probe X-ray microanalysis, and IR and Mössbauer spectroscopy. The crystal structure of the obtained compounds was refined by X-ray powder diffraction (the Rietveld method). The unit-cell parameters are as follows: for Na₂FeTi(PO₄)₃ (space group R \(\overline 3 \) c, Z = 6), a = 8.6015(1) Å, c = 21.718(1) Å, V = 1391.52(1) ų; for Rb₂FeTi(PO₄)₃ (space group P2₁3, Z = 4), a = 9.8892(2) Å, V = 967.12(1) ų. The base of the crystal structures is a mixed octahedral-tetrahedral framework {[FeTi(PO₄)₃]^2?}_3∞. Na⁺ and Rb⁺ cations are arranged in cavities of the framework. The influence of cationic substitutions on the change of the structural type of the isoformular compounds A₂FeTi(PO₄)₃ (A = Na, Rb) was considered.     

Synthesis,structure, and properties of M<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> (M = Rb,Cs)

Vanadium(V) complexes of general composition M₃VO₂(SO₄)₂ (M = Rb, Cs) were synthesized by a solid-state route. The individuality of the synthesized compounds was proved by X-ray and neutron diffraction, vibrational spectroscopy, and microscopic analysis. The X-ray diffraction patterns of M₃VO₂(SO₄)₂ were indexed to fit the monoclinic system (space group P2/c, Z = 4) with the following unit cell parameters: a = 11.6487(2) Å, b = 8.4469(2) Å, c = 12.1110(2) Å, β = 109.483(1)°, V = 1123.43 ų (Rb); a = 12.0546(3) Å b = 8.7706(2) Å, c = 12.6496(3) Å, β = 109.843(2)°, V = 1257.99 ų (Cs). In the crystal structure of M₃VO₂(SO₄)₂, [VO₂(SO₄)₂]^3? complex anions can be discerned in which the vanadium atom is surrounded by five oxygen atoms: two oxygen atoms form short terminal V–O bonds, and three oxygen atoms are from the two sulfato groups, one of which acts as a monodentate ligand and the other acts as a bidentate chelating ligand.     

Indium strontium hydrogen phosphate SrIn<Subscript>2</Subscript>[PO<Subscript>3</Subscript>(OH)]<Subscript>4</Subscript>: Synthesis and crystal structure

Indium strontium hydrogen nitrate SrIn₂[PO₃(OH)]₄ was synthesized under mild hydrothermal conditions (T = 180 or 200°C) and characterized using IR spectroscopy, chemical analysis, and thermal analysis. A structure model obtained ab initio was refined by the Rietveld method: a= 9.6412(1) Å, b = 13.763(1) Å, c = 9.3579(1) Å, R _obs = 0.0183, R _p = 0.0493 (space group B22₁2, Z = 4). The acentricity of the structure was confirmed by SHG tests (I _2ω/I _2ω(SiO2) ≈ 2.0). In the SrIn₂[PO₃(OH)]₄ structure, indium atoms reside in distorted InO₆ octahedra and form, together with PO₃(OH) tetrahedra, a mixed 3D structure {In₂[PO₃(OH)]₄} _3∞ ^2? whose voids are occupied by Sr²⁺ cations (CN = 8). The block-dimer In₂(HPO₄)₁₀ is the most informative unit of the framework. Blocks are condensed into infinite columns running in the [101] direction. The compound is thermally stable up to 400°C.     

Preparation and X-ray diffraction study of phosphate sulfates M<Subscript>2</Subscript>MgTi(SO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Phosphate sulfates M₂MgTi(SO₄)(PO₄)₂ (M = alkali metal) prepared by the sol–gel technique with ethanol as salting-out agent were characterized by differential thermal analysis, electron probe microanalysis, and X-ray phase analysis. The crystal structure of the compounds synthesized (M = Na, K) was refined by powder X-ray diffraction. The phase stability of the phosphate sulfates under heating was examined.     

Synthesis,crystal structure,and vibrational spectra of M<Subscript>4</Subscript>V<Subscript>2</Subscript>O<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> (M = K,Rb, Cs)

Synthesis was performed and physicochemical properties were studied for the M₄V₂O₃(SO₄)₄ complexes, where M = K, Rb, or Cs. Their crystal structures were determined using the set of data from X-ray diffraction and neutron diffraction studies. All compounds crystallize in a triclinic lattice (space group \(P\bar 1\), Z = 2) with the parameters: a = 7.7688(2), 7.8487(1), 8.1234(1) Å; b = 10.4918(3), 10.8750(2), 11.1065(1) Å; c = 11.9783(4), 12.1336(2), and 11.8039(1) Å; α = 76.600(2)°, 77.910(1)°, 79.589(1)°; β = 75.133(2)°, 75.718(1)°, 87.939(1)°; γ = 71.285(2)°, 72.189(1)°, 75.567(1)°; V = 881.78(5), 945.42(3), 1014.34(2) ų for K, Rb, Cs, respectively. The structure of M₄V₂O₃(SO₄)₄ was found to be formed by discrete complex anions V₂O₃(SO₄) ₄ ^4? incorporating two oxygen-bridged vanadium atoms in a distorted octahedral oxygen environment. The sulfate groups are coordinated by the vanadium atoms in the chelating mode with a large scatter of S-O interatomic distances and OSO angles. Every VO₆ octahedron has a short terminal vanadium-oxygen bond with a length of about 1.6Å. The V₂O₃(SO₄) ₄ ^4? complex anions in potassium and rubidium compounds differ from that in Cs₄V₂O₃(SO₄)₄ in the type of symmetry and mutual spatial orientation. The vibrational spectra were presented and interpreted in line with the structural analysis data.     

Synthesis and characterization of macroporous Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites as cathode materials for Li-ion batteries

The macroporous Li₃V₂(PO₄)₃/C composite was synthesized by oxalic acid-assisted carbon thermal reaction, and the common Li₃V₂(PO₄)₃/C composite was also prepared for comparison. These samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and electrochemical performance tests. Based on XRD and SEM results, the sample has monoclinic structure and macroporous morphology when oxalic acid is introduced. Electrochemical tests show that the macroporous Li₃V₂(PO₄)₃/C sample has a high initial discharge capacity (130 mAh g⁻¹ at 0.1 C) and a reversible discharge capacity of 124.9 mAh g⁻¹ over 20 cycles. Moreover, the discharge capacity of the sample is still 91.5 mAh g⁻¹, even at a high rate of 2 C, which is better than that of the sample with common morphology. The improvement in electrochemical performance should be attributed to its improved lithium ion diffusion coefficient for the macroporous morphology, which was verfied by cyclic voltammetry and electrochemical impedance spectroscopy.     

Surface and bulk conduction and thermodynamic properties of ionic salt CsH<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Transport properties of ionic salt CsH₅(PO₄)₂ are studied by the impedance method. The salt’s bulk conductivity ranges from 10^?8 to 10^?4 S cm^?1 in the temperature interval 90 to 145°C. The apparent activation energy is high (1.6–2.0 eV). The conductivity is slightly anisotropic: it is maximum in the [001] direction and minimum in the [100] direction (～5.6 and 1 times × 10^?6 S cm^?1, respectively, at 130°C). The conductivity of polycrystalline samples is higher by 1–2 orders of magnitude, and the activation energy drops to 1.05 eV due to the formation of a pseudoliquid layer with a high proton mobility at the intercrystallite boundary. The salt’s thermodynamic properties are examined by differential scanning calorimetry and thermogravimetry. No phase transitions are discovered in the salt up to the melting point (151.6°C), with the melting enthalpy equal to ～34 kJ mol^?1. The crystallization occurs at lower temperatures (107°C) and the crystallization enthalpy (?18 kJ mol^?1) is lower than the melting enthalpy. The melting is accompanied by slow decomposition of the salt. Factors affecting the proton transport in the salt are analyzed.     

Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/nitrogen-doped reduced graphene oxide nanocomposite with enhanced lithium storage properties

The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide (LVP/N-RGO) composite was prepared by a facile one-pot hydrothermal method and evaluated as cathode material for lithium-ion batteries. It is clearly seen that the novel porous structure of the as-prepared LVP/N-RGO significantly facilitates electron transfer and lithium-ion diffusion, as well as markedly restrains the agglomeration of Li₃V₂(PO₄)₃ (LVP) nanoparticles. The introduction of N atom also has positive influence on the conductivity of RGO, which improves the kinetics of electrochemical reaction during the charge and discharge cycles. It can be found that the resultant LVP/N-RGO composite exhibits superior rate properties (92 mA h g^?1 at 30 C) and outstanding cycle performance (122 mA h g^?1 after 300 cycles at 5 C), indicating that nitrogen-doped RGO could be used to improve the electrochemical properties of LVP cathodes for high-power lithium-ion battery application.

Open image in new window

Graphical abstract The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide composite with significantly accelerating electron transfer and lithium-ion diffusion exhibits superior rate property and outstanding cycle performance.

     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Synthesis,molecular, crystal and electronic structure of [RuCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>2</Subscript>(3,5-Me<Subscript>2</Subscript>HPz)<Subscript>2</Subscript>]

The reaction of [RuCl₂(PPh₃)₃] complex with dimethylpyrazole has been examined. A new ruthenium complex—[RuCl₂(PPh₃)₂(3,5-Me₂HPz)₂] has been obtained and characterized by IR, ¹H NMR and UV-VIS measurements. Crystal and molecular structure of the complex has been determined. The electronic structure of the complex has been calculated by TDDFT method.     

Synthesis,crystal structure,and biological properties of the complex [Co(DmgH)<Subscript>2</Subscript>(Seu)<Subscript>1.4</Subscript>(Se-Seu)<Subscript>0.5</Subscript>(Se<Subscript>2</Subscript>)<Subscript>0.1</Subscript>][BF<Subscript>4</Subscript>]

A new Co(III) dioxime complex with selenocarbamide was obtained by the reaction of Co(BF₄)₂ ? 6H₂O, DmgH₂, and Seu (DmgH2 = dimethylglyoxime, Seu = selenocarbamide). According to X-ray diffraction (CIF file CCDC no. 1485732), the product was an ionic coordination compound with unusual composition, [Co(DmgH)₂(Seu)_1.4(Se-Seu)_0.5(Se₂)_0.1][BF₄] (I). Apart from two monodeprotonated DmgH￣ molecules, the central atom coordinates neutral Seu, Se-Seu, and Se₂ molecules. Thus, the crystal contains the complex cations [Co(DmgH)₂(Seu)₂]⁺, [Co(DmgH)₂(Seu)(Se-Seu)]⁺, and [Co(DmgH)₂(Seu)(Se₂)]⁺. Each [BF₄]￣ anion is linked to the cations not only by electrostatic forces but also by intermolecular N–H···F hydrogen bonds (H-bonds). The complex cations are combined by intermolecular N–H···O H-bonds. The new coordination compound was found to possess biological activity. Treatment of the garlic (Allium sativum L.) foliage with an aqueous solution of I optimizes the content of selenium in the leaves and cloves and enhances the growth and plant productivity. The organs of treated plants are characterized by enhanced antioxidant protection owing to increasing activity of antioxidant enzymes and contents of proline and assimilation pigments, and decreasing lipid peroxidation.     

Impact of carbon coating thickness on the electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites

A series of Li₃V₂(PO₄)₃/C composites with different amounts of carbon are synthesized by a combustion method. The physical and electrochemical properties of the Li₃V₂(PO₄)₃/C composites are investigated by X-ray diffraction, element analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy and electrochemical measurements. The effects of carbon content of Li₃V₂(PO₄)₃/C composites on its electrochemical properties are conducted with cyclic voltammetry and electrochemical impedance. The experiment results clearly show that the optimal carbon content is 4.3 wt %, and more or less amount of carbon would be unfavorable to electrochemical properties of the Li₃V₂(PO₄)₃/C electrode materials. The results would provide some basis for further improvement on the Li₃V₂(PO₄)₃ electrode materials.     

Natural graphite enhanced the electrochemical performance of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode material for lithium ion batteries

Natural graphite treated by mechanical activation can be directly applied to the preparation of Li₃V₂(PO₄)₃. The carbon-coated Li₃V₂(PO₄)₃ with monoclinic structure was successfully synthesized by using natural graphite as carbon source and reducing agent. The amount of activated graphite is optimized by X-ray diffraction, scanning electron microscope, transmission electron microscope, Raman spectrum, galvanostatic charge/discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy tests. Our results show that Li₃V₂(PO₄)₃ (LVP)-10G exhibits the highest initial discharge capacity of 189 mAh g^?1 at 0.1 C and 162.9 mAh g^?1 at 1 C in the voltage range of 3.0–4.8 V. Therefore, natural graphite is a promising carbon source for LVP cathode material in lithium ion batteries.