溶剂极性对微波辐射老化制备前驱体及CuO/ZnO/Al2O3催化剂结构的影响

在制备CuO/ZnO/Al2O3催化剂的老化过程中,采用微波辐射老化技术,着重研究了溶剂极性对前躯体物相组成,烧后CuO/ZnO/Al2O3催化剂结构及其在浆态床合成甲醇工艺中催化性能的影响。通过XRD、DTG、H2-TPR,FTIR、HR-TEM和XPS对前驱体及催化剂表征表明,沉淀母液在微波辐射条件下进行老化,溶剂的极性对前躯体物相组成及催化剂结构影响显著。随着溶剂极性的增大,Zn2+/Cu2+取代Cu2(CO3)(OH)2/Zn5(CO3)2(OH)6中Cu2+/Zn2+的取代反应增强,使得前躯体中(Cu,Zn)5(CO3)2(OH)6和(Cu,Zn)2(CO3)(OH)2物相的含量增多,结晶度提高,导致烧后CuO/ZnO/Al2O3催化剂中CuO-ZnO协同作用增强,且CuO晶粒减小,表面Cu含量增加,催化剂活性和稳定性提高。水溶剂的极性最大,制备的催化剂活性和稳定性最好,甲醇的时空收率(STY)和平均失活率分别为320 mg.g-1.h-1和0.11%.d-1。     

微波诱导燃烧法合成类花状ZnO纳米材料及其晶体结构、荧光性质研究

以硝酸锌[Zn(NO3)2.6H2O]和尿素[CO(NH2)2]作前驱体,通过微波诱导燃烧技术可控合成具有不同形貌的ZnO纳米晶体,并用热重分析和差热分析进行了研究。对各种生长条件:微波功率,辐射时间和尿素/Zn2+物质的量的比对ZnO纳米晶体形貌的影响作了分析。结果表明:尿素/Zn2+物质的量的比对ZnO纳米材料的形貌具有显著影响。X衍射图表明合成的ZnO纳米结构呈六角形。傅里叶变换红外光谱图中400~500 cm-1处明显的峰为Zn-O的振动峰。ZnO纳米结构的发光光谱在366 nm的带边发射,因缺陷又由许多可见光发射峰组成。用扫描电子显微镜、透射电子显微镜、选区电子衍射研究了花状ZnO纳米结构的增长机理。本方法仅需几分钟就获得的了ZnO纳米结构。     

碱式硫酸锌转化法制备ZnO多孔片及其光致发光性能

采用化学浴沉积法制备了碱式硫酸锌(ZSH)纳米片, 并经1000 ℃煅烧处理得到了ZnO多孔片. 详细研究了ZSH在Zn²⁺-六亚甲基四胺前驱体溶液体系中的形成机理、ZSH 的热解过程、ZnO的结晶性、微结构以及光致发光性能. 结果表明, 所得ZnO多孔片呈规则六角形状, 其尺寸为10-50 μm, 厚度为200-500 nm, 由于高温固相反应中传质等因素的限制, 构成薄片的ZnO晶粒呈多边形或不规则形貌, 晶粒间的孔为亚微米孔, 尺寸在100-500 nm范围. ZnO多孔薄片结晶性良好, 在388 nm处表现出较强紫外发光, 无可见光区的缺陷发光. 机理分析表明, SO₄^2- 与Zn²⁺的高亲和力是Zn²⁺-六亚甲基四胺体系中ZSH生成的根本原因, 而ZSH的热分解过程对ZnO多孔片的形貌和微结构影响显著. 本研究提出了一种制备高结晶质量ZnO多孔材料的新方法, 所得ZnO多孔片可望在催化、染料敏化太阳能电池、紫外光电器件等领域得到应用.     

Formation of nanocrystalline ZnO particles into bacterial cellulose pellicle by ultrasonic-assisted in situ synthesis

Nanocrystalline zinc oxide particles were synthesized and simultaneously incorporated into a three-dimensional nanofibrous matrix of bacterial cellulose (BC) pellicles by a newly created method called “ultrasonic-assisted in situ synthesis”. The BC pellicles were first immersed in a zinc acetate solution. Then the Zn²⁺-absorbed BC pellicle was further immersed in ammonium hydroxide solution with simultaneous ultrasonic treatment. The effect of immersion time of the BC pellicles in zinc acetate solution and ultrasonic treatment time on crystalline size and percent incorporation of ZnO into the BC pellicles were determined. The crystalline size of ZnO incorporated in BC pellicles was in the range of ~54–63 nm that were similar to the diameter of BC nanofibrils. The amount of ZnO into the BC pellicles was found to increase with increasing immersion time. A longer ultrasonic treatment time resulted in smaller crystalline size of the incorporated ZnO. The particle size, morphology and dispersion of the synthesized ZnO in the BC matrix were examined by transmission electron microscope and scanning electron microscope with inbuilt energy dispersive X-ray analysis. The mechanism of the formation of the nanocrystalline ZnO particles onto the BC nanofibrils was discussed. Moreover, the antibacterial activity of the nanocrystalline ZnO particle-incorporated BC sheet against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) was also evaluated.     

In situ and simultaneous nanostructural and spectroscopic studies of ZnO nanoparticle and Zn-HDS formations from hydrolysis of ethanolic zinc acetate solutions induced by water

The simultaneous formation of nanometer sized zinc oxide (ZnO), and acetate zinc hydroxide double salt (Zn-HDS) is described. These phases, obtained using the sol-gel synthesis route based on zinc acetate salt in alcoholic media, were identified by direct characterization of the reaction products in solution using complementary techniques: nephelometry, in situ Small-Angle X-ray Scattering (SAXS), UV-Vis spectroscopy and Extended X-ray Absorption Fine Structures (EXAFS). In particular, the hydrolytic pathway of ethanolic zinc acetate precursor solutions promoted by addition of water with the molar ratio N=[H₂O]/[Zn²⁺] = 0.05 was investigated in this paper. The aim was to understand the formation mechanism of ZnO colloidal suspension and to reveal the factors responsible for the formation of Zn-HDS in the final precipitates. The growth mechanism of ZnO nanoparticles is based on primary particle (radius ≈ 1.5 nm) rotation inside the primary aggregate (radius <3.5 nm) giving rise to an epitaxial attachment of particles and then subsequent coalescence. The growth of second ZnO aggregates is not associated with the Otswald ripening, and could be associated with changes in equilibrium between solute species induced by the superficial etching of Zn-HDS particles at the advanced stage of kinetic.     

Microwave assisted hydrothermal synthesis of zinc hydroxystannate films on glass substrates

Zinc stannate (ZnSnO₃, Zn₂SnO₄) and its precursor, i.e. zinc hydroxystannate (ZnSn(OH)₆), have emerged as technological nanomaterials for different applications. Herein, we report synthesis of polycrystalline zinc hydroxystannate (ZHS) film on glass substrate through facile and efficient microwave assisted hydrothermal growth. The method comprises of three steps; deposition of ZnO seed films on glass substrates through spray pyrolysis, growth of ZnO nanorod arrays over the seeded substrates through microwave assisted hydrothermal method and transformation of the as-synthesized ZnO nanorod arrays into the ZHS films through microwave treatment in aqueous precursor solution of SnCl₄ and NaOH. The films were characterized by energy dispersive X-ray spectroscopy, X-ray diffraction and scanning electron microscopy (SEM). The films contain two crystalline phases namely ZnO with [002] as preferred growth direction and ZnSn(OH)₆ preferably grown along [200] vector. The obtained ZHS films consist of crystals of exclusively cubic structure with sizes up to several microns. Microwave irradiation time, NaOH/SnCl₄ molar ratio, concentration of Sn⁴⁺ ions, and the applied power are the four parameters which influence the size, aerial density and growth rate of ZHS microblocks.     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

微波辐射对浆态床合成甲醇CuO/ZnO/Al2O3催化剂前驱体晶相转变的影响

在微波辐射条件下,对CuO/ZnO/Al2O3催化剂的沉淀母液进行老化,通过XRD、TG、H2-TPR,FTIR、HR-TEM和XPS对前驱体及催化剂微观结构的进行表征,探讨了CuO/ZnO/Al2O3催化剂前驱体晶相转变过程中微波辐射的作用。结果表明,微波辐射有利于Cu2+取代Zn5(CO3)2(OH)6中Zn2+的同晶取代反应。微波辐射的老化过程中,首先发生Cu2+取代Zn5(CO3)2(OH)6中Zn2+生成(Cu,Zn)5(CO3)2(OH)6的同晶取代反应,并于1.0 h内基本完成;随着老化时间继续延长,主要进行Zn2+取代Cu2(CO3)(OH)2中Cu2+生成(Cu,Zn)2(CO3)(OH)2的同晶取代反应,同时(Cu,Zn)5(CO3)2(OH)6进一步结晶。与常规老化1 h制备的前驱体相比,微波辐射老化1.0 h制备的前驱体含有较多的(Cu,Zn)5(CO3)2(OH)6物相,有助于增强焙烧后CuO/ZnO/Al2O3催化剂中CuO-ZnO协同作用,提高表面铜含量,进而提高CuO/ZnO/Al2O3催化剂在浆态床合成甲醇的催化活性和稳定性,在400 h浆态床合成甲醇评价期间,甲醇时空收率最大达318.9 g.kg-1.h-1,失活率仅为0.11%.d-1。     

High Photocatalytic Properties of Zinc OxideNanoparticles with Amidoximated BacterialCellulose Nanofibers as Templates简

The freshly prepared water-wet amidoximated bacterial cellulose （Am-BC） serves as an effective nanoreactor to synthesis zinc oxide nanoparticles by in situ polyol method. The obtained ZnO/Am-BC nanocomposites have been characterized by field emission scanning electron microscopy （FE-SEM）, X-ray diffraction （XRD）, Fourier transformed infrared spectroscopy （FTIR） and thermogravimetric analysis （TGA）. The influence of the zinc acetate concentration on the morphologies and size ofZnO nanoparticles and the possible formation mechanism were discussed. The results indicated that uniform ZnO nanoparticles were homogeneously anchored on the Am-BC nanofibers through strong interaction between the hydroxyl and amino groups of Am-BC and ZnO nanoparticles. The loading content of ZnO nanoparticles is higher using Am-BC as a template than using the unmodified bacterial cellulose. The resultant nanocomposite synthesized at 0.05 wt% shows a high photocatalytic activity （92%） in the degradation of methyl orange.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Monitoring morphological and optical properties on hybrid porous polymer films

This work focuses on an optical and morphological comparative study of hybrid functional polymer porous films on glass substrates using the spin coating technique. The covering of these membranes, by a predeposited Zn²⁺ seed layer, was done applying the dip casting technique, which allows the synthesis of a large area and the control of the orientation of ZnO nanoparticles. It was possible to observe changes on the optical properties and surface morphology, which were attributed to both the spatial structure of the macromolecule and their interaction with the inorganic nanoparticles. It was also clear that hybrid porous matrices exhibit a blueshift with decreasing particle size.     

Pd/ZnO和Ag/ZnO复合纳米粒子的SPS和XPS研究

用焙烧前驱物碱式碳酸锌的方法制备了ZnO纳米粒子，采用光还原沉积贵金属的方法分别得到了质量分数为0.5％的Pd/ZnO和Ag/ZnO复合纳米粒子，并利用XRD、TEM、XPS和SPS等测试技术对样品进行表征.初步探讨了贵金属在ZnO纳米粒子表面形成原子簇的原因及沉积贵金属对ZnO纳米粒子表面光电压信号的影响.以光催化氧化气相正庚烷为模型反应，考察了沉积贵金属对ZnO纳米粒子光催化活性的影响，并探讨了光催化活性有所提高的内在原因.结果表明， ZnO纳米粒子沉积贵金属后，其表面光电压信号明显下降，而光催化活性却大大地提高，这说明可以通过表面光电压谱的测试来初步的评估纳米粒子的光催化活性，即粒子的表面光电压信号越弱，其光催化活性越高.     

Investigation of the growth parameters of hydrothermal ZnO nanowires for scale up applications

Zinc oxide nano-wires (ZnO NWs) are synthesized reproducibly with high yield via a low temperature hydrothermal technique. The influence of the growth duration time, growth temperature, zinc precursor and base concentration of Na₂CO₃ on the morphology of NWs is investigated. The growth products are characterised using scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). SEM analysis shows that the optimum growth temperature is 140 °C and finds that length and diameter of ZnO NWs have a relationship with growth duration time and base concentrations of Na₂CO₃. In addition, it is reported that a high (～90%) yield of ZnO NWs can be synthesised via using any of three different precursors: zinc chloride, zinc acetate and zinc nitrate. TEM and XRD results indicate the high purity and the single crystalline nature of the ZnO NWs. XPS confirms the absence of sodium contaminants on the surface and indicates a near flat band surface condition. PL shows a large visible band in the yellow part of the spectrum, and a small exciton emission peak, indicating a large defect concentration, which is reduced after annealing in air.     

Pd/ZnO和Ag/ZnO复合纳米粒子的制备、表征及光催化活性

 用焙烧前驱物碱式碳酸锌的方法制备了ZnO纳米粒子，采用光还原沉积贵金属的方法制备了Pd／ZnO和Ag／ZnO复合纳米粒子，并利用ICP，XRD，TEM和XPS等测试技术对样品进行了表征，初步探讨了贵金属在ZnO纳米粒子表面形成原子簇的原因．以光催化氧化气相正庚烷为模型反应，考察了样品的光催化活性以及贵金属沉积量对催化剂活性的影响．结果表明：沉积适量的贵金属，ZnO纳米粒子光催化剂的活性大幅度提高．同时，深入探讨了表面沉积贵金属的ZnO纳米粒子光催化剂活性有所提高的内在原因．     

Tuning the aspect ratio of hydrothermally grown ZnO by choice of precursor

Variable aspect ratio (length/diameter), one dimensional ZnO nanostructures are synthesized by reacting Zn²⁺ precursor derived from Zn·Ac₂, Zn·Cl₂ and Zn·(NO₃)₂ under hydrothermal treatment. The growth mechanism illustrating the formation of self-assembling from individual ZnO nanoparticles to rod-like form is explained briefly. XRD reveals that the ZnO obtained from various zinc salts are pure, wurtzite structure, with crystalline hexagonal phase. The qualitative analysis of ZnO formation and morphology of ZnO nanoparticles are estimated from FESEM and TEM micrographs. Strong UV absorption corresponding to the recombination of electron-hole pair is observed and the blue shift absorption obeys the size confinement effect. The extent of absorption relatively varies when the morphology is changed from nano-bundles to individual rod-like ZnO. When electrons are excited at wavelength of 240 nm, a strong near band edge (NBE) emission and surface defects emission are observed in the PL spectra. The broader emission situated in the blue-green region of the visible spectrum, originating from surface oxygen defects, is not observed in ZnO derived from Zn·Ac₂.     

Catalytic performance of metal oxide modified SiMCM-41 catalysts in diphenyl carbonate synthesis

Decomposition of CCl₄ into diphenyl carbonate (DPC) was examined over metal oxides modified SiMCM-41. ZnO/SiMCM-41 and Fe₂O₃/SiMCM-41 showed high activity in DPC synthesis. Although many other metal oxides, such as La₂O₃, CuO, Al₂O₃ and alkali or alkaline earth oxide, were success in destruction of CCl₄, they displayed nearly no activity on DPC synthesis. ZnO/SiMCM-41 and Fe₂O₃/SiMCM-41 were characterized by X-ray diffraction (XRD), UV-Raman, ²⁹Si MAS NMR and N₂ adsorption-desorption isotherms, and results showed that ferric and zinc oxide were supported onto SiMCM-41. The well ZnO dispersion in SiMCM-41 channels and the weak electrostatic interaction between chlorine anion and Zn²⁺ play an important role for the high activity of ZnO/SiMCM-41 in decomposition of CCl₄ into DPC.     

Synthesis and UV shielding properties of zinc oxide ultrafine particles modified with silica and trimethyl siloxane

This paper introduces a kind of ZnO ultrafine particles modified with silica and trimethyl siloxane (TMS). Thus zinc carbonate hydroxide (ZCH) as the precursor of ZnO was synthesized using chemical precipitation method, and the precursor was modified in situ with silica and TMS. The modified ZnO ultrafine particles were obtained after calcinating the modified precursors. The surface properties of the modified ZnO ultrafine particles were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectra (XPS), scanning electron microscope (SEM), and transmission electron microscopy (TEM). The effects of the modifiers on the photocatalytic activity and UV shielding ability of ZnO ultrafine particles were also investigated and discussed.     

Influences of Co doping on the structural,optical and magnetic properties of ZnO nanorods synthesized by hydrothermal route

Pure and Co-doped ZnO nanorods have been synthesized by a hydrothermal process. The structure, morphology and properties of as-prepared samples have been studied using X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectrometer as well as by superconducting quantum interference device (SQUID). The structure and morphology analyses show that Co doping can slightly impede the ZnO crystallinity, influence the nanorods morphology, but cannot change the preferred growth orientation of ZnO nanorods. The amount of Co doping contents is about 3.0 at% in ZnO nanorods and dopant Co²⁺ ions substitute Zn²⁺ ions sites in ZnO nanocrystal without forming any secondary phase. The optical measurements show that the Co doping can effectively tune energy band structure and enrich surface states in both UV and VL regions, which lead to novel PL properties of ZnO nanorods. In addition, ferromagnetic ordering of the as-synthesized Zn_1?xCo_xO nanorod arrays has been observed at room temperature, which should be ascribed to sp–d and d–d carrier exchange interactions and presence of abundant defects and oxygen vacancies.     

Synthesis and thermo-physical properties of water-based novel Ag/ZnO hybrid nanofluids

The comparative study on the thermo-physical properties of water-based ZnO nanofluids and Ag/ZnO hybrid nanofluids is reported in the present study. The outer surface of ZnO nanoparticles was modified with a thin coating of Ag nanoparticles by a wet chemical method for improved stability and heat transfer properties. The ZnO and Ag/ZnO nanofluids were prepared with varying volume concentration (??=?0.02–0.1%). The synthesized nanoparticles and nanofluids were characterized with different characterization methods viz., scanning electron microscopy, X-ray diffraction, dynamic light scattering, thermal conductivity measurement, and viscosity measurement. Results show that thermal conductivity of Ag/ZnO hybrid nanofluids is found to be significantly higher compared to ZnO nanofluids. The maximum thermal conductivity an enhancement for Ag/ZnO nanofluid (??=?0.1%) is found to 20% and 28% when it compared with ZnO nanofluid (??=?0.1%) and water, respectively.     

Preparation of ZnO Nanoparticles: Structural Study of the Molecular Precursor

The structure of zinc acetate derived precursor currently used in the sol-gel synthesis of ZnO nanoparticles is described. The reaction products obtained before and after reflux of ethanolic zinc acetate solution have been studied by UV-Vis, photoluminescence, FTIR and EXAFS at the Zn K edge. EXAFS results evidence for both precursor solutions a change from the octahedral coordination sphere of oxygen atoms characteristic of the solid zinc acetate dihydrate compound into a four-fold environment. The EXAFS spectra of precursor solutions can be satisfactorily reproduced using the molecular structure reported for Zn₄O(Ac)₆ (Ac = COOCH₃). UV-Vis and FTIR measurements are also in agreement with the formation of this oligomeric precursor. The structural modification is more pronounced after reflux at 80°C, because the increase of the Zn₄O(Ac)₆ amount and the formation of nearly 3.0 nm sized ZnO nanoparticle.