Doubly <Emphasis Type="Italic">Q</Emphasis>-Switched Nd:YAG Ceramic Laser

Using simultaneously both an acousto-optic (AO) modulator and a Cr⁴⁺:YAG saturable absorber in the cavity, we demonstrate for the first time the performance of a diode-pumped doubly Q-switched Nd:YAG ceramic laser. In contrast to purely acousto-optic Q-switched laser, this doubly Q-switched laser can generate shorter and more symmetric pulses. At an absorbed pump power of 10 W and a repetition rate of 20 kHz, the pulse width is compressed to 30 and 25 ns, respectively.     

A Tm:YLF End-Pumped Acousto-Optic <Emphasis Type="Italic">Q</Emphasis>-Switched Ho:YAG Laser

We report an acoustic Q-switched Ho:YAG laser end-pumped by a 1,908 nm Tm:YLF laser. The doping concentration of Ho:YAG crystal is 2 at.%, and dimensions ø5×20 mm. We measure the pulsedlaser output characteristics of the Ho:YAG laser at different repetition rates (RF). Under optimum experimental conditions, the high-power 2.1 μm output power reaches 4.17 W at a given pump power of 13.25 W and repetition frequency of 8.0 kHz. For a slope efficiency of 16.88%, the corresponding optical-to-optical conversion efficiency reaches 31.47%. We obtain a minimum single pulsed energy of 7.36 mJ and a pulse width of 52.8 ns at a pump power of 10.52 W and repetition rate of 0.5 kHz, with a peak power of 139 kW.     

A Compact YAG/Nd:YAG/Cr:YAG Passively <Emphasis Type="Italic">Q</Emphasis>-Switched Pulse Burst Laser Pumped by 885 nm Laser Diode

We demonstrate a high-repetition-rate, short-pulse-width pulse burst laser from a compact 885 nm laser diode directly pumped by a passively Q-switched YAG/Nd:YAG/Cr:YAG laser. We investigate the output laser characteristics with different output transmissions and spot sizes of the pumping laser and compare these characteristics. After optimization, we achieve a shortest pulse width of 1.4 ns generated by a 1,064 nm pulse burst laser. The single-pulse energy reaches 239 μJ at 86.3 kHz, with a peak power of 117.2 kW.     

Double-Arched LDA Stagger-Pumped Electro-Optic <Emphasis Type="Italic">Q</Emphasis>-Switched Nd:YAG Green Laser Using KTP Double-Crystal Extracavity Frequency Doubling

We develop a laser utilizing second harmonic generation that exhibits both high single-pulse energy and high beam quality. The system starts with a double-arched laser-diode-array stagger-pumped electro-optic Q-switched Nd:YAG with a thermal lensing compensated convex-concave resonator. The 1,064 nm output beam is then frequency doubled in an extracavity KTP double-crystal assembly that offsets birefringence walk-off. We obtain a maximum single-pulse energy of 72.7 mJ at 532 nm with 176 mJ at 1,064 nm. The corresponding optical-to-optical conversion efficiency is 41.3%, and the pulse width is 9.2 ns at a repetition rate of 20 Hz. The beam quality factor M² is 1.83 in both horizontal and vertical directions at the maximum output energy, and the energy stability is better than 3% across half an hour.     

High-Pulse-Energy Passively <Emphasis Type="Italic">Q</Emphasis>-Switched 1,123 nm Laser with a Nd:GdYAG Mixed Garnet as Laser Medium

We demonstrate a diode-pumped passively Q-switched Nd:GdYAG mixed garnet laser at 1,123 nm. A Cr⁴⁺:YAG crystal with an initial transmission of 97% is used as the saturable absorber. The maximum average output power is 1.05 W at an absorbed pumping power of 8.12 W. A single-pulse energy can reach up to 78.9 μJ, with a corresponding pulse repetition rate of 13.3 kHz.     

<Emphasis Type="Italic">Q</Emphasis>-Switched Yb-Doped Fiber Ring Laser with a Saturable Absorber Based on a Graphene Polyvinyl Alcohol Film

We propose, design, and demonstrate a Q-switched ytterbium-doped fiber laser (YDFL) employing a thin graphene polyvinyl alcohol (PVA) film as a passive saturable absorber (SA). The graphene is synthesized by electrochemical exfoliation of graphite at room temperature in 1% sodium dodecyl sulfate (SDS) aqueous solution. Graphene flakes obtained from the process are mixed with PVA solution as the host polymer to produce a thin film, which acts as a passive Q-switcher in the YDFL ring cavity. The laser generates a stable pulse operating at a wavelength of 1,076.4 nm with a threshold pump power of 73.7 mW. At a maximum 980 nm pump power of 113.6 mW, the YDFL generates an optical pulse train with a repetition rate of 25.53 kHz and a pulse width of 10 μs. The maximum pulse energy of 50.9 nJ is obtained at a pump power of 109.9 mW. A higher-performance Q-switched YDFL is expected to be achieved with optimization of the graphene saturable absorber and the laser cavity.     

A Novel 1,066 nm Nd:Gd<Subscript>0<Emphasis Type="Italic">.</Emphasis>69</Subscript>Y<Subscript>0<Emphasis Type="Italic">.</Emphasis>3</Subscript>NbO<Subscript>4</Subscript> Passively <Emphasis Type="Italic">Q</Emphasis>-Switched Pulse-Burst Laser

We demonstrate for the first time a Cr⁴⁺:YAG passively Q-switched 1066 nm pulse-burst laser under 879 nm direct pump with a novel Nd:Gd_0.69Y_0.3NbO₄ crystal. The output laser characteristics with different pump repetition rates and different Cr⁴⁺:YAG initial transmission are studied. Without the Cr⁴⁺:YAG, we obtain a maximum output energy of 2.55 mJ at an absorbed pump energy of 5.79 mJ with the highest 48% slope efficiency. The pulse-burst laser contains a maximum of 7 pulses for a Cr⁴⁺:YAG initial transmission of 55% and a pump repetition rate of 1 kHz. The single-pulse energy and narrowest pulse width reach 160 μJ and 5.5 ns at 38.2 kHz, with a peak power of 32 kW.     

Resonant acoustic spectroscopy at low <Emphasis Type="Italic">Q</Emphasis> factors

The application of resonant acoustic spectroscopy to rock, building materials, and materials with cracks is hindered by the substantial mechanical losses in these materials and by the overlapping of the individual resonance responses. The paper describes a method for the determination of the resonance frequencies in low-Q materials in the presence of a strong overlapping of resonances. The effect of cracks on the values of the resonance frequencies and Q factors is studied experimentally.     

<Emphasis Type="Italic">Q</Emphasis>-Manifolds and Mackenzie Theory

Double Lie algebroids were discovered by Kirill Mackenzie from the study of double Lie groupoids and were defined in terms of rather complicated conditions making use of duality theory for Lie algebroids and double vector bundles. In this paper we establish a simple alternative characterization of double Lie algebroids in a supermanifold language. Namely, we show that a double Lie algebroid in Mackenzie’s sense is equivalent to a double vector bundle endowed with a pair of commuting homological vector fields of appropriate weights. Our approach helps to simplify and elucidate Mackenzie’s original definition; we show how it fits into a bigger picture of equivalent structures on ‘neighbor’ double vector bundles. It also opens ways for extending the theory to multiple Lie algebroids, which we introduce here.     

Amplification of a <Emphasis Type="Italic">Q</Emphasis>-Switched Ho:GdVO<Subscript>4</Subscript> Oscillator in Thulium-Doped Large-Mode-Area Fiber

We report a high peak power, narrow linewidth, stable pulsed Ho:GdVO₄ amplifier based on thuliumdoped fiber, which produces 6.65 W average output power at 2,048 nm and 56.8 kW peak power with 11.7 ns pulse width at 10 kHz repetition rate. We use a simple Q-switched Ho:GdVO₄ laser as a seed laser and a thulium-doped fiber pumped by a 792 nm laser diode as an amplifier. The fiber amplifier provided 6.5 dB gain to the input signal. The spectral linewidth of the Ho:GdVO₄ amplifier remains < 0.5 nm with an M² beam quality of 1.36.     

<Emphasis Type="Italic">f</Emphasis>(<Emphasis Type="Italic">R</Emphasis>) Cosmology from <Emphasis Type="Italic">q</Emphasis>-theory

From a macroscopic theory of the quantum vacuum in terms of conserved relativistic charges (generically denoted by q ^(a) with label a), we have obtained, in the low-energy limit, a particular type of f(R) model relevant to cosmology. The macroscopic quantum-vacuum theory allows us to distinguish between different phenomenological f(R) models on physical grounds. The text was submitted by the authors in English.     

<Emphasis Type="Italic">Q</Emphasis><Superscript>2</Superscript> evolution of parton densities at smal-<Emphasis Type="Italic">x</Emphasis> values

In the leading twist approximation of the Wilson operator product expansion with “frozen” and analytic strong coupling constants we show that Bessel-inspired behavior of the structure function F ₂ at small x, obtained for a flat initial condition in the DGLAP evolution equations, leads to good agreement with the deep-inelastic scattering experimental data from HERA.     

Non-vacuum Bianchi types <Emphasis Type="Italic">I</Emphasis> and <Emphasis Type="Italic">V</Emphasis> in <Emphasis Type="Italic">f</Emphasis> (<Emphasis Type="Italic">R</Emphasis>) gravity

In a recent paper (Sharif and Shamir in Class. Quantum Grav. 26:235020, 2009), we have studied the vacuum solutions of Bianchi types I and V spacetimes in the framework of metric f (R) gravity. Here we extend this work to perfect fluid solutions. For this purpose, we take stiff matter to find energy density and pressure of the universe. In particular, we find two exact solutions in each case which correspond to two models of the universe. The first solution gives a singular model while the second solution provides a non-singular model. The physical behavior of these models has been discussed using some physical quantities. Also, the function of the Ricci scalar is evaluated.     

Voltage-on-Type RTP Pockels Cell for <Emphasis Type="Italic">Q</Emphasis>-switch of an Er:YAG Laser at 1,617 nm

We report a resonantly diode-pumped electro-optic Q-switched Er:YAG laser operating at 1,617 nm using a voltage-on-type rubidium titanyl phosphate (RTP) Pockels cell as the modulator. The Er:YAG laser operates at a very stable Q-switching mode with a per pulse energy yield of 1.5 mJ and a pulse duration of 114 ns at 1 kHz PRF under an incident pump power of 21.6 W.     

Ferromagnetism and ferroelectricity in Eu<Emphasis Type="Italic">X</Emphasis> (<Emphasis Type="Italic">X</Emphasis> = <Emphasis Type="Italic">O</Emphasis>, <Emphasis Type="Italic">S</Emphasis>): pressure effects

Ferromagnetism and ferroelectricity in Eu monochalcogenides have been investigated by ab initio density functional theory in the DFT+U approach. Exchange interaction parameters and Curie temperatures under pressure are studied and discussed using Heisenberg Hamiltonian with first and second-nearest-neighbor interactions. The calculations showed that the hydrostatic pressure perfectly improves the Curie temperature (EuO: T _C = 175 K; EuS: T _C = 33.8 K) and in the other hand it cannot induce the spontaneous polarization (P _s ). The effect of uniaxial and biaxial pressure is also studied. Although the uniaxial strains slightly increases the Curie temperature, it ensures the ferrolectricity in these systems by producing a spontaneous polarization of the order of P _s (EuO) = 57.50 μC/cm² and P _s (EuS) = 42.86 μC/cm² with pressures of 5% and 4%, respectively. The search for new model systems is a necessity to better understand the physics related to multiferroïc materials and to consider possible applications.     

<Emphasis Type="Italic">V</Emphasis>-<Emphasis Type="Italic">A</Emphasis> sum rules with <Emphasis Type="Italic">D</Emphasis> = 10 operators

The difference of vector and axial-vector charged current correlators is analyzed by means of QCD sum rules. The contribution of 10-dimensional 4-quark condensates is calculated and its value is estimated within the framework of the factorization hypothesis. It is compared to the result obtained from an operator fit of Borel sum rules in the complex q ²-plane, calculated from experimental data on hadronic -decays. This fit gives accurate values of the light quark condensate and the quark-gluon mixed condensate. The size of the high-order operators and the convergence of the operator series are discussed.Received: 10 May 2004, Revised: 7 September 2004, Published online: 18 November 2004     

Spherical Symmetric Perfect Fluid Collapse in <Emphasis Type="Italic">f</Emphasis>(<Emphasis Type="Italic">R</Emphasis>, <Emphasis Type="Italic">T</Emphasis>) Gravity

This paper contains the study of spherically symmetric perfect fluid collapse in the frame work of f(R, T) modified theory of gravity. We proceed our work by considering the non-static spherically symmetric background in the interior and static spherically symmetric background in the exterior regions of the star. The junction conditions between exterior and interior regions are presented by matching the exterior and interior regions. The field equations are solved by taking the assumptions that the Ricci scalar as well as the trace of energy-momentum tensor are to be constant, for a particular f(R, T) model. By inserting the solution of the field equations in junction conditions, we evaluate the gravitational mass of the collapsing system. Also, we discuss the apparent horizons and their time formation for different possible cases. It is concluded that the term f(R ₀, T ₀) behaves as a source of repulsive force and that’s why it slowdowns the collapse of the matter.     

Energy dependence of Cronin momentum in saturation model for <Emphasis Type="Italic">p</Emphasis> + <Emphasis Type="Italic">A</Emphasis> and <Emphasis Type="Italic">A</Emphasis> + <Emphasis Type="Italic">A</Emphasis> collisions

The energy dependence of the Cronin momentum for p + A and A + A collisions in the saturation model are calculated. This dependence is consistent with simple dimensional considerations and can be used to test the validity of the saturation model. It gives the possibility to distinguish the different variants of the saturation model with precise experimental data and to measure the x dependence of the saturation momentum.     

<Emphasis Type="Italic">f</Emphasis> (<Emphasis Type="Italic">R</Emphasis>) black holes

We study the f (R)-Maxwell black hole imposed by constant curvature and its all thermodynamic quantities, which may lead to the Reissner-Nordström-AdS black hole by redefining Newtonian constant and charge. Further, we obtain the f (R)-Yang-Mills black hole imposed by constant curvature, which is related to the Einstein-Yang-Mills black hole in AdS space. Since there is no analytic black hole solution in the presence of Yang-Mills field, we obtain asymptotic solutions. Then, we confirm the presence of these solutions in a numerical way.