Research on the Solid State Fermentation of Jerusalem Artichoke Pomace for Producing <Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">R</Emphasis>-2,3-Butanediol by <Emphasis Type="Italic">Paenibacillus polymyxa</Emphasis> ZJ-9

R,R-2,3-butanediol (R,R-2,3-BD) was produced by Paenibacillus polymyxa ZJ-9, which was capable of utilizing inulin without previous hydrolysis. The Jerusalem artichoke pomace (JAP) derived from the conversion of Jerusalem artichoke powder into inulin extract, which was usually used for biorefinery by submerged fermentation (SMF), was utilized in solid state fermentation (SSF) to produce R,R-2,3-BD. In this study, the fermentation parameters of SSF were optimized and determined in flasks. A novel bioreactor was designed and assembled for the laboratory scale-up of SSF, with a maximum yield of R,R-2,3-BD (67.90 g/kg (JAP)). This result is a 36.3% improvement compared with the flasks. Based on the same bath of Jerusalem artichoke powder, the total output of R,R-2,3-BD increased by 38.8% for the SSF of JAP combined with the SMF of inulin extraction. Overall, the utilization of JAP for R,R-2,3-BD production was beneficial to the comprehensive utilization of Jerusalem artichoke tuber.     

Haloperidol imprinted polymer: preparation,evaluation, and application for drug assay in brain tissue

Several molecularly imprinted polymers (MIPs) were prepared in the present work, and their binding properties were evaluated in comparison with a nonimprinted polymer (NIP). An optimized MIP was selected and applied for selective extraction and analysis of haloperidol in rabbit brain tissue. A molecularly imprinted solid-phase extraction (MISPE) method was developed for cleanup and preconcentration of haloperidol in brain samples before HPLC-UV analysis. Selectivity of the MISPE procedure was investigated using haloperidol and some structurally different drugs with similar polarity that could exist simultaneously in brain tissue. The extraction and analytical process was calibrated in the range of 0.05–10 ppm. The recovery of haloperidol in this MISPE process was calculated between 79.9 and 90.4 %. The limit of detection (LOD) and the limit of quantification (LOQ) of the assay were 0.008 and 0.05 ppm, respectively. Intraday precision and interday precision values for haloperidol analysis were less than 5.86 and 7.63 %, respectively. The MISPE method could effectively extract and concentrate haloperidol from brain tissue in the presence of clozapine and imipramine. Finally, the imprinted polymer was successfully applied for the determination of haloperidol in a real rabbit brain sample after administration of a toxic dose. Therefore, the proposed MISPE method could be applied in the extraction and preconcentration before HPLC-UV analysis of haloperidol in rabbit brain tissue.     

Molecularly imprinted solid-phase extraction monolithic capillary column for selective extraction and sensitive determination of safranine T in wolfberry

A method was developed to sensitively determine safranine T in wolfberry by molecularly imprinted solid-phase extraction (MISPE) coupled with high-performance liquid chromatography and laser-induced fluorescence detection (HPLC-LIF). The MISPE capillary monolithic column was prepared by water-bath in situ polymerization, using safranine T, methacrylic acid (MAA), and ethylene dimethacrylate (EDMA) as template, functional monomer, and cross-linker, respectively. The properties of the homemade MISPE capillary monolithic column, including capacity and specificity, were investigated under optimized conditions and the morphologies of inner polymers were characterized by scanning electron microscopy (SEM). The mean recoveries of safranine T in wolfberry ranged from 91.2 % to 92.9 % and the intraday and interday relative standard deviation (RSD) values all ranged from 3.4 % to 4.2 %. Good linearity was obtained over 0.001–1.0 μg mL^–1 (r?=?0.9999) with a detection limit (S/N?=?3) of 0.4 ng g^–1. Under the selected conditions, enrichment factors of over 90-fold were obtained and the extraction on the monolithic column effectively cleaned up the wolfberry matrix. The results demonstrated that the proposed MISPE-HPLC-LIF method could be applied to sensitively determine safranine T in wolfberry.

Optimization of Modern Analytical SPME and SPDE Methods for Determination of <Emphasis Type="Italic">Trans</Emphasis>-2-nonenal in Barley,Malt and Beer

Trans-2-nonenal is an aldehyde contributing to an unpleasant off-flavor and odor of rancid butter in stored beer. The automated solid-phase microextraction technique (SPME) coupled with gas chromatography (GC) and solid-phase dynamic extraction (SPDE) coupled with gas chromatography were optimized and introduced to determine trans-2-nonenal in barley, malt and beer. Five types of SPME fibers coated with different stationary phases (100 μm PDMS, 65 μm PDMS/DVB, 85 μm CAR/PDMS, 50/30 μm DVB/CAR/PDMS, 85 μm PA) and two needles (PDMS, PDMS/AC) were compared and tested for their efficiencies in the headspace (HS) SPME and SPDE determination of trans-2-nonenal in barley, malt and beer. The highest extraction efficiency of HS-SPME was achieved with the PDMS/DVB fiber, and addition of 1.5 g of NaCl, extraction time was 20 min at 60 °C. The highest extraction efficiency of HS-SPDE was obtained with the PDMS needle, 15 extraction strokes at 60 °C and addition of 1.5 g of NaCl. Trans-2-nonenal was identified with the method of HS-SPME coupled gas chromatography-mass spectrometry (GC–MS); the samples were analyzed using the HS-SPME-GC-coupled gas chromatography-flame ionization detector (GC-FID) technique.     

Synthesis of 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids

Nitration of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one gave its 5-nitro derivative which was subjected to alkylation with dimethyl sulfate, diethyl sulfate, and benzyl(dimethyl)phenylammonium chloride. The resulting 1,3-dimethyl-, 1,3-diethyl-, and 1,3-dibenzyl-5-nitro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones were reduced to the corresponding 1,3-dialkyl-5-amino-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, and the latter reacted with itaconic acid to produce 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids. 1-(2-Oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acid was obtained by analogous reaction with 5-amino-2,3-dihydro-1H-imidazo[4,5-b]-pyridin-2-one.     

Toxicity of <Emphasis Type="Italic">Camellia sinensis</Emphasis>-Fabricated Silver Nanoparticles on Invertebrate and Vertebrate Organisms: Morphological Abnormalities and DNA Damages

Our understanding of nanoparticle toxicity and fate in the aquatic environment is still patchy. In the present study, the toxicity of silver nanoparticles coated by Camellia sinensis (Cs) leaf extract metabolites (Cs-AgNPs) was investigated in comparison with C. sinensis leaf extract and AgNO₃ on a micro-crustacean, Ceriodaphnia cornuta, and a fish Poecilia reticulata. 100% mortality of C. cornuta was observed post-exposure to AgNO₃ (40 µg/ml) if compared to the Cs leaf extract and Cs-AgNPs, showing 30 and 56% mortality at the same concentration, respectively. In P. reticulata 100% mortality was observed testing AgNO₃ and Cs-AgNPs post-exposure to 1 and 30 µg/ml, respectively. Light microscopy and CLSM images showed the accumulation of nanoparticles in the intestine of C. cornuta treated with Cs-AgNPs at 40 µg/ml. In addition, histological observations confirmed the abnormal tissue texture in nanoparticle-exposed P. reticulata, if compared to control fishes. Furthermore, C. cornuta and P. reticulata treated with Cs-AgNPs showed DNA damages compared to the control. Overall, these findings indicated relevant limits about the employ of silver-based pesticides in the environment, and also pointed out the Cs-AgNPs were less toxic to C. cornuta and P. reticulata if compared to silver ions.     

Organocatalytic approach toward the green one-pot synthesis of novel benzo[<Emphasis Type="Italic">f</Emphasis>]chromenes and 12<Emphasis Type="Italic">H</Emphasis>-benzo[5,6]chromeno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridines

An efficient tandem reaction approach is described to prepare novel benzo[f]chromenes from 2,3-dihydroxynaphthalene, malononitrile and aldehydes using 10 mol% guanidine hydrochloride as the catalyst under solvent-free conditions. The method was also extended to the preparation of novel 12H-benzo[5,6]chromeno[2,3-b]pyridines from 2-aminoprop-1-ene-1,1,3-tricarbonitrile instead of malononitrile under the same reaction conditions. The described one-pot three-component reaction is characterized by short reaction times, high-product yield, mild reaction conditions, simple workup procedure, and simple purification.     

Single-Step Partial Purification of Intracellular <Emphasis Type="Italic">β</Emphasis>-Galactosidase from <Emphasis Type="Italic">Kluyveromyces lactis</Emphasis> Using Microemulsion Droplets

Partial purification of β-galactosidase from the crude extract of Kluyveromyces lactis was carried out using water-in-isooctane microemulsions formed by the anionic surfactant, sodium di-ethylhexyl sulfosuccinate (Aerosol OT). In order to obtain the crude extract, yeast cells of K. lactis were disrupted by a cell disrupter and separated. The purification of β-galactosidase from the extract by a recently developed one-step reversed micellar (i.e., microemulsion-based) extraction method was then tested, by measuring total protein mass and enzyme activity in the product stream and by analyzing its composition using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and gel filtration chromatography. Effects of salt concentration, protein concentration, and pH on the extraction were investigated. Using this approach, a 5.4-fold purification of β-galactosidase was achieved with 96 % total activity recovery, using a feed containing crude extract and 50 mM K-phosphate buffer (pH 7.5) and 50 mM KCl. Gel filtration chromatography showed that the single extraction was successful at removing low molecular weight impurity proteins (molecular weight (MW)?<?42 kDa) from the crude extract.     

Evaluation of the Nitric Oxide and Nitrite Scavenging Capability,N-Nitrosamine Formation Inhibitory Activity,and Optimization of Ultrasound-Assisted Aqueous Two-Phase System Extraction of Total Saponins from <Emphasis Type="Italic">Coreopsis tinctoria</Emphasis> Flowering Tops by Response Surface Methodology

Coreopsis tinctoria flowering tops (CTFs) is a popular health product as herbal tea or as a traditional medicinal herb that is rich in saponins and exerts substantial biological activity. In this study, an ultrasound-assisted aqueous two-phase system (ATPS) was utilized to extract total saponins from CTFs and optimize the extraction process by response surface methodology. Moreover, the nitric oxide and nitrite scavenging capability, and N-nitrosamine formation inhibitory activity of total saponins were evaluated. Results showed that the optimal conditions for total saponins were 37.76% (w/w) ammonium sulfate and 35.62% (w/w) ethanol in ATPS coupled with ultrasonic-assisted extraction. Under the optimal conditions, the maximum yield of total saponins of 33.4 g/kg can be obtained from the CTFs raw material. The nitric oxide radical scavenging, nitrite scavenging, and N-nitrosamine inhibitory activities (SC₅₀) were 287.92 ± 7.42, 191.63 ± 7.69, and 1787.4 ± 51.26 μg/mL, respectively. The total saponins has a certain nitric oxide and nitrite scavenging capability, and N-nitrosamine formation inhibitory activity in vitro. Given these activities, research on saponins from CTFs provides profound and lasting implications for the novel applications of C. tinctoria.     

Stereochemistry of dihydroxylation of <Emphasis Type="Italic">N</Emphasis>-arylbicyclo[2.2.1]-hept-5-ene-<Emphasis Type="Italic">endo</Emphasis>- and -<Emphasis Type="Italic">exo</Emphasis>-2,3-dicarboximides

Stereochemistry of the oxidation of N-arylbicyclo[2.2.1]hept-5-ene-endo-and-exo-2,3-dicarboximides at the double bond with peroxyacetic acid generated in situ in the presence of sulfuric acid and with an anhydrous dioxane solution of peroxyacetic acid was studied. In both cases, the reaction was stereospecific, regardless of the substituent in the N-aryl group and configuration of the imide ring, but the reaction direction depended on the presence of water in the system. In the first case, the corresponding trans-5,6-dihydroxy derivatives were formed, while in the second, exo-5,6-epoxy derivatives. The oxidation of N-arylbicyclo[2.2.1]-hept-5-ene-endo-and-exo-2,3-dicarboximides with a solution of potassium permanganate in aqueous acetone gave the corresponding N-aryl-cis-5,6-dihydroxybicyclo[2.2.1]heptane-endo-and-exo-2,3-dicarboximides. The exo,cis,exo and exo,cis,endo configurations of the synthesized compounds were determined by ¹H NMR spectroscopy.     

Preparation and characterization of molecularly imprinted microspheres for selective extraction of trace melamine from milk samples

We describe molecularly imprinted microspheres (MIMs) for the selective extraction of melamine from milk. The MIMs were made from melamine as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the linking agent. The MIMs were synthesized by suspension polymerization and characterized by rebinding experiments. They displayed high adsorption capacity, fast rebinding kinetics, and highly specific rebinding of melamine. The imprinting factor is 4.1. Scatchard analysis revealed a one-type rebinding behavior, the dissociation constant and maximum rebinding capacity being 37.59 g L^?1 and 30.85 μmol g^?1, respectively. The MIMs exhibited a 25% cross-reactivity towards atrazine, but less than 3.0% towards prometryn, clenbuterol and metronidazole. In addition, a MIM-based solid phase extraction (MISPE) column for melamine was prepared by packing MIMs into a common SPE cartridge. The MISPE extraction gave recoveries of 89.8 to 100.6% of melamine, with relative standard deviations of 5.9 to 7.5%. There was no significant loss of rebinding capacity after more than 60 repeated uses, thus demonstrating the high stability of the MISPE column. The MSPE column also was applied to the extraction of melamine from spiked liquid and powdered milk with satisfying accuracy and precision.

Bioactive compounds from <Emphasis Type="Italic">Smilax excelsa</Emphasis> L.

Phytochemical investigation of EtOAc extract of Smilax excelsa has led to isolation and structure elucidation of five compounds. The structures of these compounds are established by different spectroscopic techniques including 1D and 2D-NMR, HRMS and ECD spectroscopy. The compounds were: solanesol (1), violasterol A (2), trans-resveratrol (3), 5-O-caffeoylshikimic acid (4) and 6-O-caffeoyl-β-d-fructofuranosyl-(2-1)-α-d-glucopyranoside (5). The configuration of compound 2 was established by electronic circular dichroism (ECD) spectroscopy. Meanwhile the cytotoxicity and antibacterial activity of the compounds were evaluated by MTT and MIC assays. Compounds 1 and 2 showed promising inhibition on MCF-7 cell line with IC₅₀ of 161.6 and 190.0 µM, respectively. Also compounds 2 and 3 illustrated activity against Staphylococcus aureus with MIC values of 142.5 and 136.9 µM, respectively.     

Recyclization of 1,3-dialkyl-6-nitro-1<Emphasis Type="Italic">H</Emphasis>-imidazo[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridine-2,5(3<Emphasis Type="Italic">H</Emphasis>,4<Emphasis Type="Italic">H</Emphasis>)-diones into imidazole derivatives

Treatment of 5-amino-1,3-dialkyl-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones with sodium nitrite in aqueous HCl gave 1,3-dialkyl-1H-imidazo[4,5-b]pyridine-2,5(3H,4H)-diones which were nitrated with potassium nitrate in sulfuric acid to 6-nitro derivatives, and the latter underwent recyclization into 4-amino-1,3-dialkyl-5-(1H-pyrazol-5-yl)-2,3-dihydro-1H-imidazol-2-ones by the action of hydrazine hydrate.     

Nitro derivatives of 1,3-dihydrobenzimidazol-2-one: I. Synthesis of <Emphasis Type="Italic">N</Emphasis>-nitrobenzimidazol-2-ones

1,3,5,6-Tetranitro-2,3-dihydro-1H-benzimidazol-2-one, 1,5,6-trinitro-2,3-dihydro-1H-benzimidazol-2-one, and 1,4,5,6-tetranitro-2,3-dihydro-1H-benzimidazol-2-one were synthesized for the first time by nitration of 5,6-di- and 4,5,6-trinitro-2,3-dihydro-1H-benzimidazol-2-ones with concentrated nitric acid in acetic anhydride.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

Quantitative Analysis of Phenolic Acids in Extracts Obtained from the Fruits of Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap

Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap. are, in common with all species belonging to the Apiaceae family, rich in coumarins and essential oils. Phenolic acids also present in the plant are very important pharmacologically, because of their broad spectrum of biological activity. A simple high-performance liquid chromatographic method has been developed for separation and quantitative analysis of the major phenolic acids in extracts obtained from the fruits of P. alsaticum and P. cervaria. Soxhlet extraction, ultrasound extraction, and accelerated solvent extraction under different conditions were used to find the most efficient extraction conditions. Optimum chromatographic performance was obtained with a C₁₈ column and acetonitrile—1% (v/v) aqueous acetic acid as mobile phase. Ferulic, p-coumaric, caffeic, vanillic, syringic, p-hydroxybenzoic, protocatechuic, chlorogenic, and gallic acids were investigated in the fruits of the plants. For all calibration plots linearity was good (R ² > 0.9991) in the ranges tested. The highest yields of most of the phenolic acids were achieved by use of accelerated solvent extraction. The predominant phenolic acid in the fruits of both plants was chlorogenic acid. The amounts, which depended on the method of extraction, were approximately 146 ± 1.616 and 109.92 ± 3.405 mg per 100 g dry weight for P. cervaria and P. alsaticum, respectively.     

A green and practical method for the synthesis of novel pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles and <Emphasis Type="Italic">bis</Emphasis>-pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles using sulfonic acid-functionalized ionic liquid

An efficient and practical protocol was developed for the synthesis of novel pyrano[2,3-c]pyrazoles and bis-pyrano[2,3-c]pyrazoles by one-pot four-component reaction of arylaldehyde, ethyl acetoacetate, hydrazine hydrate and dimethyl malonate using SO₃H-functionalized ionic liquid [DMBSI]HSO₄ as a potential green catalyst under solvent-free condition. The method presented is mild, environmentally friendly, inexpensive and functionality tolerant and produces the desired pyranopyrazoles in short reaction times (17–24 min) and excellent yields (85–95%). In addition, the catalyst can be reused at least ten times without almost any change in its catalytic activity.     

Extraction of Oil from Flaxseed (<Emphasis Type="Italic">Linum usitatissimum</Emphasis> L.) Using Enzyme-Assisted Three-Phase Partitioning

In this study, enzyme-assisted three-phase partitioning (EATPP) was used to extract oil from flaxseed. The whole procedure is composed of two parts: the enzymolysis procedure in which the flaxseed was hydrolyzed using an enzyme solution (the influencing parameters such as the type and concentration of enzyme, temperature, and pH were optimized) and three-phase partitioning (TPP), which was conducted by adding salt and t-butanol to the crude flaxseed slurry, resulting in the extraction of flaxseed oil into alcohol-rich upper phase. The concentration of t-butanol, concentration of salt, and the temperature were optimized to maximize the extraction yield. Under optimized conditions of a 49.29 % t-butanol concentration, 30.43 % ammonium sulfate concentration, and 35 °C extraction temperature, a maximum extraction yield of 71.68 % was obtained. This simple and effective EATPP can be used to achieve high extraction yields and oil quality, and thus, it is potential for large-scale oil production.     

Biosynthesis,characterization, and antimicrobial effect of silver nanoparticles obtained using <Emphasis Type="Italic">Lavandula</Emphasis> × <Emphasis Type="Italic">intermedia</Emphasis>

The use..... of aqueous leaf extract of Lavandula × intermedia for biosynthesis of silver nanoparticles (AgNPs) is presented. The plant extract was obtained by boiling dried leaves and using the obtained filtrate for the synthesis of AgNPs. The study was conducted to investigate an ecofriendly approach to metal nanoparticle synthesis and to evaluate the antimicrobial potential of both the aqueous plant extract and resulting silver nanoparticles against different microbes using the disc diffusion method. The synthesis of silver nanoparticles was monitored using ultraviolet–visible (UV–v is) spectroscopy, which showed a localized surface plasmon resonance band at 411 nm and a shift of the band to higher wavenumber of 422 nm after 90 min of reaction. Powder X-ray diffraction analysis and transmission electron microscopy of the obtained AgNPs revealed their crystalline nature, with average size of 12.6 nm. Presence of elemental silver was further confirmed by energy-dispersive X-ray spectroscopy. Fourier-transform infrared spectroscopy confirmed presence of phytochemicals from Lavandula × intermedia leaf extract on the AgNPs. The AgNPs showed good antimicrobial activity with inhibition zone ranging from 10 to 23 mm; the largest inhibition zone (23 mm) occurred against Escherichia coli. Generally, the AgNPs displayed more antimicrobial activity against all investigated pathogens compared with Lavandula × intermedia leaf extract, and were also more active than streptomycin against Klebsiella oxytoca and E. coli at the same concentration. The silver nanoparticles showed prominent antimicrobial activity with a lowest minimum inhibitory concentration (MIC) value of 15 μg/mL against E. coli, K. oxytoca, and Candida albicans.     

Synthesis,structure, physicochemical properties,and solid-phase thermolysis of Co<Subscript>2</Subscript>Sm(Piv)<Subscript>7</Subscript>(2,4-Lut)<Subscript>2</Subscript>

Heterometallic pivalate Co₂Sm(Piv)₇(2,4-Lut)₂ (1) was prepared for the first time and structurally characterized at 293 and 160 K. Antiferromagnetic exchange interactions are dominant in complex 1. This compound experiences a first-order phase transition within 210–260 K. A set of thermodynamic functions was obtained for this complex (C _p , H _T ⁰ - H ₁₈₀ ⁰ , and S _T ⁰ ), and parameters were determined for solid-phase thermolysis where samarium cobaltate SmCoO₃ is the only product.