Conformational analysis of 2-aminophenyl-, 2-aminobenzyl-, and 2-nitrobenzyl(diphenyl)phosphine oxides

The polarity and conformations of 2-aminophenyl-, 2-aminobenzyl-, and 2-nitrobenzyl(diphenyl)-phosphine oxides were studied by the dipole moment method, IR spectroscopy, and quantum chemical calculations. 2-Aminophenyl- and 2-aminobenzyl(diphenyl)phosphine oxides were found to exist preferentially as conformers with intramolecular hydrogen bond. 2-Nitrobenzyl(diphenyl)phosphine oxide is likely to be represented by equilibrium mixture of three conformers in which the phosphoryl and nitro groups are oriented syn or anti with respect to the \(PC_{sp^3 } C_{sp^2 } \) fragment.     

Strongly photoluminescent Eu(III) tetrazolate ternary complexes with phosphine oxides as powerful sensitizers

The Eu(III) cation forms electrically neutral photoluminescent complex with 5-(2-pyridyl-1-oxide)tetrazolate (PTO) anion. Although the photoluminescence properties of such tertiary Eu(III) and Tb(III) complexes were not as high (13 and 31% photoluminescence quantum yield, respectively) as reported for other diketonate lanthanide complexes probably because of high number of nitrogen atoms involved in PTO which leads to attachment of water molecules, reducing the luminescence quantum yield with vibrational and rotational quenching. Here, we report the removal of quencher molecules from the coordination sphere of tris–europium tetrazolate oxide complex by replacing them with various phosphine oxides which leads to improved photoluminescence quantum yield for the complexes by acting as auxiliary co-ligands with that of the main antenna 5-(2-pyridyl-1-oxide)tetrazolate. The coordination sphere in these complexes can be complemented by aromatic phosphine oxides to provide highly photoluminescent Eu(III) complexes. The highest quantum yield was 38% in 3 [Eu(PTO)₃·DPEPO](H₂O)₅ containing bis(2-(diphenylphosphino)phenyl) ether oxide (DPEPO) as compared to tris–europium complex with 5-(2-pyridyl-1-oxide)tetrazolate.     

Extraction and coordination behavior of diphenyl hydrogen phosphine oxide towards actinides

Extraction behavior of some selected actinides like U(VI), Th(IV), and Am(III) was investigated with three different H-phosphine oxides, viz. diphenyl hydrogen phosphine oxide (DPhPO), dihexyl hydrogen phosphine oxide (DHePO) and diphenyl phosphite (DPP). The H-phosphine oxides exhibited a dual nature towards the extraction of actinides where the ligand not only extracts the metals by cation exchange but also by coordination with the phosphoryl group at lower and higher acidic concentrations, respectively. Among all ligands employed, DPhPO showed highest extraction with actinides with a substituent dependent trend as follows: DPhPO > DHePO > DPP. This trend emphasizes the importance of substituents around the phosphine oxide towards their extraction of actinides. The coordination behavior of DPhPO was studied by investigating its corresponding complexes with Th(NO₃)₄ and UO₂(NO₃)₂. The metal complexes of these actinides were characterized using FT-IR, ¹H and ³¹P NMR spectroscopic techniques. Density Functional Theory (DFT) calculations were also performed to understand the electronic and geometric structure of the ligand and the corresponding metal complexes.     

Studies on highly regio- and stereoselective fluorohydroxylation reaction of 3-aryl-1,2-allenyl phosphine oxides with Selectfluor

The fluorohydroxylation of allenyl phosphine oxides with Selectfluor in commercial MeCN without prior treatment or a mixed solvent of anhydrous MeCN (refluxed over CaH₂ and distilled before use) and 7.0 equiv of H₂O or MeNO₂/H₂O=10/1 afforded 2-fluoro-3-hydroxy-1(E)-alkenyl diphenyl phosphine oxides in moderate yields with very high regio- and stereoselectivities. The E-stereoselectivity is believed to be controlled by the phosphine oxide functionality. In the reaction of 3-(4-methoxyphenyl)-1,2-propadienyl diphenyl phosphine oxide, further fluorination on the electron-rich phenyl ring was also observed.     

Studies on highly regio- and stereoselective selenohydroxylation reaction of 1,2-allenyl phosphine oxides with PhSeCl

The selenohydroxylation of readily available 1,2-allenyl phosphine oxides with PhSeCl in MeCN/H₂O afforded 3-hydroxy-2-phenylselanyl-1(E)-alkenyl diphenyl phosphine oxides in good yields with very high regio- and stereoselectivities including the high efficiency of the axial chirality transfer. The E-stereoselectivity is believed to be determined by the neighboring group participation effect of the diphenyl phosphine oxide functionality.     

Lithiation-methylation of thiasilinane 1-oxides

Lithiation-methylation of 3,3-dimethyl-1λ⁴,3-thiasilinane 1-oxide and 4,4-dimethyl-1λ⁴,4-thiasilinane 1-oxide under the action of butyllithium or lithium diisopropylamide and methyl iodide was studied. In both cases, monomethylation proceeds selectively α to the sulfoxide group to form 2,3,3-trimethyl-1λ⁴,3-thiasilinane 1-oxide and 2,4,4-trimethyl-1λ⁴,4-thiasilinane 1-oxide, respectively. Subsequently, 2,3,3-trimethyl-1λ⁴,3-thiasilinane 1-oxide undergoes monomethylation into the same α position to give 2,2,3,3-tetramethyl-1λ⁴,3-thiasilinane 1-oxide, while 4,4-dimethyl-1λ⁴,4-thiasilinane 1-oxide is dimethylated into the neighboring α’ position to form two stereoisomers of 2,4,4,6-tetramethyl-1λ⁴,4-thiasilinane 1-oxide with axial-equatorial or equatorial-equatorial methyl groups in the 2 and 6 positions.     

Reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate

Diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide was synthesized by the reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate. As shown by the ¹H, ¹³C, ¹⁹F, ³¹P, ²⁹Si multinuclear NMR spectroscopy data, the silicon atom in the molecule is tetracoordinate. The absence of P=O→Si interaction in diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide, as follows from the comparison of the calculated [GIAO B3LYP/6-311++G(2d,p)] and experimental δ(²⁹Si) and δ(³¹P) values, is due to the formation of complex with BF₃ by the phosphoryl oxygen.     

Thermal properties of poly(tertiary phosphine oxides)

DTA and TGA (in air and in nitrogen) are presented for the poly(tertiary phosphine oxides), C₆H₅[(C₆H₅)P(O)CH₂CH₂]_nP(O)(C₆H₅)₂, where n = 1, 2, or 3.     

Reaction of Pentafluorophenyl(diphenyl)phosphine with Nitrilimines

Reaction of pentafluorophenyl(diphenyl)phosphine with nitrilimines is a multistep process leading to formation of unstable fused heterocycles with a fluorophosphorane moiety as primary products. Their hydrolysis involves opening of the heteroring and subsequent cleavage of the N-N bond in intermediate phosphorylated hydrazones. The final products are diphenyl(6-arylamino-2,3,4,5-tetrafluorophenyl)phosphine oxides.     

Extraction of plutonium from acidic media using various phosphine oxides

Extraction, loading and stripping studies of Pu(IV) have been carried out using three phosphine oxides namely Cyanex^Ò-923 (cyn-923), Cyanex^Ò-925 (cyn-925) and TOPO in dodecane from nitric acid medium. All the three phosphine oxides have shown very high extraction of Pu. The order of extraction for Pu by these compounds is cyn-923 > TOPO - cyn-925. Loading of Pu (30.0 mg/l) in 3.0M HNO₃ was carried out using 5% solution of each of the phosphine oxides in dodecane. It was found that even at an organic to aqueous phase ratio of 1:10, the loading of Pu is >96%. From the loaded organic phase, Pu could be almost quantitatively stripped using 0.1 or 0.5M oxalic acid. The extraction of Pu(IV) with cyn-925 has also been carried out from HCl, HNO₃ or HClO₄ (0.5 to 9.1M). The species extracted into the cyn-925/dodecane phase from 3.0M HNO₃ or HCl media was found to be Pu(L)₄ ^.2 cyn-925 where L = NO₃ ^– or Cl^–. Similar species were observed to be formed when dodecane was replaced by xylene, chlorobenzene or o-dichlorobenzene.     

Electron impact induced fragmentations and rearrangements of some phenyl substituted phosphine oxides

Electron impact induced fragmentations and rearrangements of 1-phenyl-2,2,3-trimethylphosphetane 1-oxide, 1-phenylphospholane 1-oxide and 1-phenylphosphorinane 1-oxide were investigated. A process common to all of these phosphine oxides was electron impact induced formation of new carbon-carbon bonds involving the phenyl rings. Evidence for such rearrangements included observation of hydrocarbon fragment ions containing seven or more carbons.     

Study of thermochemical properties of diphenyl[dialkyl(alkyl)carbamoylmethyl]phosphine oxides

The synthesis and the studies of properties of diphenyl[dialkyl(alkyl)carbamoylmethyl]phosphine oxides by differential scanning calorimetry, mass spectrometry and Knudsen effusion method were performed. The thermodynamic parameters of melting and vaporization were calculated.     

Flame retardant epoxy resins based on diglycidyl ether of (2,5-dihydroxyphenyl)diphenyl phosphine oxide

Phosphine oxide-containing epoxy resins were prepared from diglycidyl ether of (2,5-dihydroxyphenyl)diphenyl phosphine oxide and diglycidyl ether of bisphenol A by crosslinking with 4,4′-diaminodiphenylmethane. Several (2,5-dihydroxyphenyl)diphenyl phosphine oxide/diglycidyl ether of bisphenol A molar ratios were used to obtain materials with different phosphorus content. The properties of the thermosetting materials were evaluated by differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, and limiting oxygen index and related to the phosphorus content. Thermal and thermooxidative degradation was studied by GC/MS, ³¹P MAS NMR spectroscopy, and scanning electron microscopy. Limiting oxygen index values indicate good flame retardant properties that are related to the formation of a protective phosphorus-rich layer that slowed down the degradation and prevented it from being total. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2142–2151, 2007     

Synthesis and steric structure of 3,4-dimethyl-2-(3-methyl-1-phenylbuta-1,2-dienyl)-5-phenyl-1,3,2λ<Superscript>5</Superscript>-oxazaphospholane 2-oxide

Allenic 1,3,2-oxazaphospholanes on the basis of d-pseudoephedrine were synthesized. The steric structure of 3,4-dimethyl-2-(3-methyl-1-phenylbuta-1,2-dienyl)-5-phenyl-1,3,2λ⁵-oxazaphospholane 2-oxide was determined by X-ray diffraction.     

Pd(II) complexes of novel phosphine ligands: Synthesis,characterization, and catalytic activities on Heck reaction

Novel phosphine oxides, (((3-methylpyridin-2-yl)amino)methyl)diphenylphosphine oxide (1) and diphenyl((pyrazin-2-ylamino)methyl)phosphine oxide (2), were synthesized and characterized. Phosphines ligands (3 and 4) were obtained by the reduction of 1 and 2 with AlH₃, monitored by ³¹P NMR spectroscopy. Pd(II) complexes of 3 and 4 were synthesized and characterized (5 and 6). The catalytic activity of 5 and 6 was tested on the reaction of styrene with both activated and deactivated aryl bromides in air. The results of the catalytic experiments were discussed through DFT calculations.     

The dimerization of diphenyl(cyclopentadienyl)phosphine ligands by Diels-Alder addition

Reaction of diphenyl(cyclopentadienyl)phosphine, 1, with [PdCl₂(PhCN)₂], [PtCl₂(SMe₂)₂] or [M(CO)₄(norbornadiene)], where M = Mo or W, gave the complexes [PdCl₂{(Ph₂P)₂C₁₀H₁₀}], [PtCl₂{(Ph₂P)₂C₁₀H₁₀}] or [M(CO)₄{(Ph₂P)₂C₁₀H₁₀}] respectively, in which the ligand underwent dimerization by Diels-Alder addition. The reaction occurs in a very selective way and this is rationalized in terms of a template effect, in which two ligands 1 in mutually cis positions undergo the Diels-Alder reaction. In contrast, the complex [Fe(CO)₄(Ph₂PC₅H₅)] is stable to Diels-Alder addition. The structures of the complexes were deduced by ¹H, ¹³C and ³¹P NMR spectroscopy. The major product contains a six-membered chelate ring while a minor product, formed in the palladium and platinum systems only, contains a five-membered chelate ring.     

Organometallic polymers. I. Synthesis of ferrocene-containing poly(phosphine oxides) and poly(phosphine sulfides)

Poly(phosphine oxides) and poly(phosphine sulfides) of ferrocene were synthesized in the melt phase. The resulting ferrocene polymers, linked by phosphorus bridges, were thermally stable and infusible solids, of low molecular weight (M?_n < 4000). Phenyldichlorophosphine, phenyldichlorophosphonate, and phenylphosphonothioic dichloride were copolymerized with ferrocene in the melt phase (80–110°C.) with ZnCl₂ as a catalyst. As the polymerization temperature was raised, cleavage of cyclopentadiene rings from iron became more pronounced, and cyclopentane-bridged polymers of ferrocene were produced in competition with the ferrocene–phosphorus polymers. The cleavage-polymerization process became predominant at 140°C. The structures of poly(phosphine oxides) (and sulfides) of ferrocene were verified by infrared and nuclear magnetic resonance spectroscopy.     

Neighboring group participation of phosphine oxide functionality in the highly regio- and stereoselective iodohydroxylation of 1,2-allenylic diphenyl phosphine oxides

Two sets of reaction conditions were established to enable the highly regio- and stereoselective iodohydroxylation of 1,2-allenylic diphenyl phosphine oxides, yielding (E)-2-iodo-3-hydroxy-1-alkenyl diphenyl phosphine oxides with very high stereoselectivity. The scope of this reaction was examined extensively. Notably, studies on the reactivity of optically active substrates indicated that the axial chirality in the starting allenes may be efficiently transferred to the center chirality of the products with no discernible loss of enantiopurity. Due to the importance of phosphine-containing compounds, both as reagents and ligands, this reaction shows potentials in organic synthesis. Investigations using ESI-MS technology on the (18)O-labeled product, which was prepared using (18)O-water as the solvent, indicated that the (18)O atom was bound to phosphorus in the final product and the oxygen atom of the hydroxyl comes from the phosphinyl functionality of the allene reactant. These results provided solid evidence for the formation of a five-membered cyclic intermediate from the neighboring group participation of the diphenylphosphinyl group. To the best of our knowledge, this is the first time that the neighboring group participation of this type of group was observed.     

Extraction of heterometal ruthenium(II) complexes by diphenyl(dibutylcarbamoylmethyl)phosphine oxide from nitrate-nitrite solutions

The synergistic extraction of [RuNO(NO₂)₄OH]^2? by diphenyl(dibutylcarbamoylmethyl)phosphine oxide (L) in the presence of nonprecious metal cations (M²⁺) is studied; the extraction occurs on the account of the formation of heterometal complexes [RuNO(NO₂)₄OHML_m] (M = Zn, Cu, Co, Ni) due to the addition of M²⁺ to ruthenium through the oxygen atoms of the OH and NO₂ groups and the bidentate coordination of L to M²⁺. The extraction constants for Ru/M complexes and ML_n(NO₃)₂ are determined. The variation in the extraction constants with changing M (Co, Zn, Cu > Ni) does not agree with the Irwing-Williams row, unlike the extraction with monodentate PO-containing extractants (Zn > Cu > Co > Ni). The feasibility of ruthenium extraction in the form of Ru/M complexes from complex nitrate-nitrite solutions is demonstrated.     

Reaction of N-(4,4-Diethoxybutyl)phosphamides with Chloro(diphenyl)phosphine. Synthesis of 2-(Diphenylphosphoryl)pyrrolidines

Russian Journal of Organic Chemistry - The reaction of N-(4,4-diethoxybutyl)phosphamides with chloro(diphenyl)phosphine in chloroform in the presence of acetic acid gave previously unknown...