Solution Chemistry of Arsenic Anions in the Presence of Metal Cations

The interaction of arsenic(V) and arsenic(III) oxyanions with metal cations was investigated by potentiometry under temperature and ionic strength conditions approaching those prevailing in natural waters. The selection includes the major metal cations and some other ions of high environmental relevance. Ionic pairs [M(As^VO₄)]^?, [M(HAs^VO₄)] and [M(H₂As^IIIO₃)]⁺ formation is suggested for all +2 metal cations, based on the potentiometric results. These ion-pairs between arsenic anions and other metal cations are hardly ever mentioned or taken into account when arsenic speciation in natural waters is considered. These results provide the basis for studying arsenic speciation in natural aquatic systems, on which environmental fate, bioavailability and toxicity of the element depend. Some extrapolations to the conditions of the natural waters are presented as well as some insights into the adsorption process onto hydrous oxides.     

Selenite and Selenate Speciation in Natural Waters: Interaction with Divalent Metal Ions

Selenium is a trace element of environmental relevance. Studies on its solution chemistry are scarce and were mostly carried out under experimental conditions of little relevance to environmental research. Thus, we have performed new studies of selenium speciation in solutions of low ionic strength, in contrast to those prevailing in the literature data. In this work, potentiometric titrations (at 20.0 °C, and I=0.15 mol⋅L⁻¹ NaClO₄) were carried out for systems containing Se(VI) or Se(IV) oxyanions and divalent metal ions (Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg, and Pb). Ion pairs such as [M(SeO₄)] and [M(HSeO₄)₂], or [M(HSeO₃)]⁺ and [M(SeO₃)], exist in solutions. The data reported here provide the basis for determining selenium speciation in natural aquatic systems, on which the bioavailability and toxicity of this element depends.     

Molybdenum(VI) complexation by amino-acids. Part 1 Species in aqueous solution of sodium molybdate and L-aspartate

Summary The complexation of molybdenum(VI) by L-aspartate in dilute aqueous solutions, at pH 6, was studied using u.v. spectrophotometry,¹H and¹³C n.m.r. spectroscopy. A single complex anion, [MoO₃(C₄H₅NO₄)]^2–, is observed in solution. The conformation of the aspartate ion in the complex was determined and shown to be consistent with it acting as a terdentate ligand. The formation constant of the complex was determined at different ionic strengths. Job's method has been employed, here and elsewhere, to study the stoichiometry of the complex. However, the result is strongly affected by polymerization of molybdenum(VI): this effect is discussed.     

Supramolecular architecture of the [M(1-MeIm)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>]<Superscript>2+</Superscript> (M = Ni,Co) complexes with the terephthalate anion

The [M(1-MeIm)₂(H₂O)₄](Tpht) · 4H₂O complexes (where M = Ni, Co; 1-MeIm is 1-methylimidazole; H₂Tpht is terephthalic acid) are synthesized and characterized by X-ray diffraction analysis. The ionic structure is built of the [M(1-MeIm)₂(H₂O)₄]²⁺ cations and (Tpht)^2? anions. The metal ions have a distorted octahedral coordination. The cations and anions are united by hydrogen bonding system.     

Speciation, liquid-liquid extraction, sequential separation, preconcentration, transport and ICP-AES determination of Cr(III), Mo(VI) and W(VI) with calix-crown hydroxamic acid in high purity grade materials and environmental samples

A new functionalized calix[6]crown hydroxamic acid is reported for the speciation, liquid-liquid extraction, sequential separation and trace determination of Cr(III), Mo(VI) and W(VI). Chromium(III), molybdenum(VI) and tungsten(VI) are extracted at pH 4.5, 1.5 M HCl and 6.0 M HCl, respectively with calixcrown hydroxamic acid (37,38,39,40,41,42-hexahydroxy7,25,31-calix[6]crown hydroxamic acid) in chloroform in presence of large number of cations and anions. The extraction mechanism is investigated. The various extraction parameters, appropriate pH/M HCl, choice of solvent, effect of the reagent concentration, temperature and distribution constant have been studied. The speciation, preconcentration and kinetic of transport has been investigated. The maximum transport is observed 35, 45 and 30 min for chromium(III), molybdenum(VI) and tungsten(IV), respectively. For trace determination the extracts were directly inserted into the plasma for inductively coupled plasma atomic emission spectrometry, ICP-AES, measurements of chromium, molybdenum and tungsten which increase the sensitivity by 30-fold, with detection limits of 3 ng ml⁻¹. The method is applied for the determination of chromium, molybdenum and tungsten in high purity grade ores, biological and environmental samples. The chromium was recovered from the effluent of electroplating industries.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Cyclothiazenokomplexe von Molybdän(V) und (VI), sowie von Wolfram(VI) Die Kristallstruktur von (PPh4)2[MoCl3(N3S2)]2 · 2 CH2Cl2

Cyclothiazeno Complexes of Molybdenum(V), Molybdenum(VI), and Tungsten(VI). Crystal Structure of (PPh₄)₂[MoCl₃(N₃S₂)]₂ · 2 CH₂Cl₂ . From excess trithiazylchloride and molybdenum or tungsten hexacarbonyl, respectively, the cyclothiazeno complexes [MCl₃(N₃S₂)]₂(S₂N₂) are obtained. They possess metal atoms linked via a planar S₂N₂ ring. The corresponding bromo compounds [MBr₃(N₃S₂)]₂(S₂N₂) can be obtained in liquid bromine from S₄N₄ and MoBr₄ or WBr₆, respectively, or from S₄N₄ with the corresponding metal hexacarbonyls in the presence of bromine. Thermolysis of [WBr₃(N₃S₂)]₂(S₂N₂) yields [WBr₃(N₃S₂)]₂ which is dimerized via nitrogen bridges. When [MoCl₃(N₃S₂)]₂(S₂N₂) reacts with tetraphenylphosphonium chloride in dichloromethane, the S₂N₂ acts as reducing agent, and the paramagnetic molybdenum(V) complex (PPh₄)₂[MoCl₃(N₃S₂)]₂ · 2 CH₂Cl₂ is obtained (μ_eff = 1.2 B.M.). The i.r. spectra are reported. The crystal structure of (PPh₄)₂[MoCl₃(N₃S₂)]₂ · 2 CH₂Cl₂ was determined by X-ray diffraction (2524 independent reflexions, R = 0.052). It crystallizes in the space group P1 with the lattice con- stants a = 943.9, b = 1209.6, c = 1469.2 pm, α = 69.27, β = 72.20 and γ = 82.08°, Z = 1. There are tetraphenylphosphonium cations and centrosymmetric, dimeric anions [MoCl₃(N₃S₂)]₂^2?. The molybdenum atoms are part of six-membered cyclothiazeno rings MoN₃S₂ with MoN bond lengths of 177 and 197 pm; the N atom with the longer MoN bond is linked to the second Mo atom, so that a planar Mo₂N₂ ring results; this ring is nearly coplanar with the two MoN₃S₂ rings. Furthermore, each molybdenum atom is linked with three chlorine atoms with MoCl bond lengths of 240–242 pm, so that the Mo atoms possms a distorted octahedral coordination.     

Kinetics and mechanism of oxidation of some nickel(II)–imine–oxime complexes by peroxodisulfate in aqueous acidic solutions

The kinetics of the oxidation of [Ni(II)(H₂L¹)](ClO₄)₂, (H₂L¹ = 3,8-dimethyl-4,7-diaza-3,7-decadiene-2,9-dione dioxime) and [Ni(II)(HL²)]ClO₄, (H₂L² = 3,9-dimethyl-4,8-diaza-3,8-undecadiene-2,10-dione dioxime) by peroxodisulfate anion (PDS) in aqueous media at 298.0 K have been studied. The kinetics of oxidation of both Ni(II) complexes was found to be first order in the complex concentration. The dependence of the pseudo-first-order rate constant, k _obs, for both complexes showed first-order dependence on PDS concentration. The kinetics of oxidation of [Ni(II)(H₂L¹)]²⁺ complex showed a complex dependence on [H⁺] over the pH range of 4.98–7.50, whereas that of [Ni(II)(HL²)]⁺ is independent of pH over the pH range of 5.02–7.76. The value of k _obs, for both complexes, decreased with increasing ionic strength consistent with the involvement of oppositely charged ions in the rate-determining step. The effect of ionic strength is more pronounced for [Ni(II)(H₂L¹)]²⁺–PDS reaction than for [Ni(II)(HL²)]⁺–PDS reaction, confirming the higher charges of the latter.     

Halide abstraction reactions of tin(IV) chloride and the group 3 chlorides MCl3 (M = Sc,Y, La) in thf: crystal and molecular structure of [ScCl2(thf)4][SnCl5(thf)]

Direct treatment (1:1) of MCl₃ (M = Sc, Y or La) with SnCl4 in thf provides colourless compounds of the type ScSnCl₇(thf)₅ and MSnCl₇(thf)₆ (M = Y, La), which have been characterised by elemental analysis and spectroscopic studies. An X-ray determination of ScSnCl₇(thf)₅ reveals an ionic structure comprising individual six-coordinate [ScCl₂(thf)₄]⁺ cations and [SnCl₅(thf)]^-anions. The cations feature an octahedral metal geometry in which a linear Cl-Sc-Cl unit is surrounded by an equatorial girdle of four solvent (thf) molecules.     

Reactions of a Polyhalide Ionic Liquid with Copper,Silver, and Gold

The reactions of copper, silver, and gold with the imidazolium-based polyhalide ionic liquid (IL) [C₆C₁Im][Br₂I] were investigated by using X-ray photoelectron spectroscopy (XPS), weight-loss measurements, and gas-phase mass spectrometry. All three Group 11 metals are strongly corroded by the IL at moderate temperatures to give a very high content of dissolved Cu^I, Ag^I, and Au^I species. The IL–metal solutions are stable against contact with water and air. The replacement of imidazolium with inorganic sodium cations decreased metal corrosion rates by orders of magnitude. Our results clearly indicate metal oxidation by iodide from dibromoiodide anions to form molecular iodine and anionic [Br-M^I-Br]⁻ (M=Cu, Ag, Au) complexes stabilized by imidazolium counterions. From experiments with a trihalide IL with imidazolium methylated at the 2-position, we ruled out the formation of imidazole–carbene as a cause of the observed corrosion. In contrast to Group 11 metals, molybdenum is inert against the trihalide IL, which is attributed to surface passivation.     

Syntheses and structural characterization of six ionic salts based on bis(benzimidazole)/bis(imidazole) and perchlorometallates of Zn and Cu

Six salts, ([(H₂L1)(ZnCl₄)] (1) (L1 = 1,1′-bis(benzimidazolyl)methane), [(H₂L1)(CuCl₄)]·H₂O (2), [(H₂L2)(ZnCl₄)] (3) (L2 = 1-(3-(1H-benzimidazol-1-yl)propyl)-1H-benzimidazole), [( H₂L2)(CuCl₄)] (4), [(H₂L3)(CuCl₄)]·H₂O (5) (L3 = 1- (4-(1H-benzimidazol-1-yl)butyl)-1H-benzimidazole), and [(H₂L4)(ZnCl₄)]·H₂O (6) (L4 = 3,6-bis(imidazol-1-yl)pyridazine)), derived from bis(benzimidazole)/bis(imidazole) and metal(II) chloride dihydrate (zinc(II) chloride and copper(II) chloride dihydrate) were prepared and characterized by IR, X-ray structure analysis, elemental analysis, and TG analysis. The aromatic rings of the cations in all of the compounds are planar. X-ray diffraction analysis revealed that all the complexes have 3-D layer network structures built from hydrogen bonds between the cations and chlorometallate anions. Water molecules also play an important role in structure extension in 2, 5, and 6. The arrangements of the anions and cations in their solid state are dominated not only by size and symmetry of the cations, but also by the non-covalent interactions existing in the crystal structures.     

Two polyoxometallate‐based supramolecular compounds influenced by the ratio between the polyoxometallate anion and organic cation

Two polyoxometallate‐based compounds, tris[1,1′‐(butane‐1,4‐diyl)bis(1H‐imidazol‐3‐ium)] bis[tetracosa‐μ₂‐oxido‐dodecaoxido‐μ₁₂‐phosphato‐dodecamolybdenum(VI)], (C₁₀H₁₆N₄)₃[PMo₁₂O₄₀]₂, (I), and 1,1′‐(butane‐1,4‐diyl)bis(1H‐imidazol‐3‐ium) 1‐[4‐(1H‐imidazol‐1‐yl)butyl]‐1H‐imidazol‐3‐ium tetracosa‐μ₂‐oxido‐dodecaoxido‐μ₁₂‐phosphato‐dodecamolybdenum(VI) dihydrate, (C₁₀H₁₆N₄)(C₁₀H₁₅N₄)[PMo₁₂O₄₀]·2H₂O, (II), were synthesized by hydrothermal techniques at different pH values. The stoichiometric ratio between the polyoxometallate (POM) anions and organic cations is 2:3 in (I), with one of the cations lying on an inversion centre. The doubly protonated 1,1′‐(butane‐1,4‐diyl)diimidazole (BIM) cations are linked to the [PMo₁₂O₄₀]³⁻ anions by hydrogen bonds to form a three‐dimensional supramolecular network. The stoichiometric ratio of POM anions and organic cations is 1:2 in (II), and the anion is located about a centre of inversion. The partly protonated BIM cations and solvent water molecules form hydrogen bonds with the [PMo₁₂O₄₀]³⁻ anions, yielding a two‐dimensional supramolecular layer. The different lattice architectures of (I) and (II) may be governed by the ratio between the POM anions and organic cations, which, in turn, is determined by the pH value.     

烷基咪唑离子液体对脂肪酶催化酯水解反应活性的影响

考察了1-烷基-3-甲基咪唑类离子液体对柱状假丝酵母脂肪酶(CRL)催化橄榄油水解反应活性的影响,利用电导法确定了磷酸盐缓冲液中Br^-,Cl^-,[BF₄]^-系列咪唑离子液体的临界胶束浓度(CMC)和[PF₆]^-系列咪唑离子液体的溶解度.结果显示,离子液体的阴、阳离子对酶活性的影响规律与离子液体的Kosmotropicity性质无明显关联,但与离子液体在体系中的含量密切相关,在最适离子液体含量时,酶活性达到最高;阳离子[C_nMIM]⁺中的n越大,可促进酶活性的离子液体适宜含量越低;Br^-,[BF₄]^-系列离子液体的浓度超过CMC时则抑制酶活;阴离子对酶活性的最大促进作用顺序为Br^->Cl^->[BF₄]^->[PF₆]^-.离子液体对酶活性的影响随体系pH和温度的不同而改变,在最适离子液体浓度时的最适pH均为7.000.在pH 7.000,30 ^oC以及[C₈MIM]Br离子液体浓度为47.6 mmol/L的最佳条件下,最高相对酶活力和比活力分别达到1734%和54.4 U/mg protein.     

Triphenyltetrazolium chloride as a new analytical reagent for molybdenum(VI): Application to plant analysis

Solvent extraction of molybdenum(VI) ion associate with triphenyltetrazolium chloride (TTC) has been studied. TTC was proposed as reagent for the spectrophotometric determination of micro amounts of molybdenum(VI) at λ_max 250 nm. The optimum conditions for extraction of molybdenum(VI) as an ionassociation complex with TTC has been determined. Beer’s law is obeyed in the range of 0.5–10 μg/mL molybdenum(VI). The molar absorptivity of the ion-pair is 1 × 10⁶ L/mol cm. The sensitivity of the method is 9.6 × 10⁻⁵ μg/cm². The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: distribution constant K _D = 32.64, extraction constant K _ex = 2.19 × 10¹⁰ association constant β = 6.71 × 10⁸. The interferences of different cations, anions on molybdenum(VI) determination were also investigated. A sensitive and selective method for the determination of microquantities of molybdenum(VI) has been developed. The determination was carried out without preliminary separation of molybdenum. A novel procedure of molybdenum(VI) extraction and spectrophotometric determination in different plant samples was examined.     

Modulating the Solubilities of Ionic Liquid Components in Aqueous–Ionic Liquid Biphasic Systems: A Q‐NMR Investigation

Aqueous–ionic liquid (A–IL) biphasic systems have been examined in terms of deuterated water, acid, and IL cation and anion mutual solubilities in the upper (water‐rich, in mole fraction) and lower phase of aqueous/IL biphasic systems at ambient temperature. The biphasic mixtures were composed of deuterated acids of various concentrations (mainly DCl, DNO₃, and DClO₄ from 10^?2 to 10^?4 M ) and five ionic liquids of the imidazolium family with a hydrophobic anion (CF₃SO₂)₂N^?, that is, [C₁C_nim][Tf₂N], (n=2, 4, 6, 8 and 10). The analytical techniques applied were ¹H NMR, ¹⁹F NMR, Karl–Fischer titration, pH potentiometry for IL cations and anions, and water and acid determination. The effects of the ionic strength (μ=0.1 M NaCl and NaNO₃ as well as μ=0.1 M , 0.2 M and 0.4 M NaClO₄, according to the investigated acid), the nature of the IL cation, and the nature of the mineral acid on the solubilities of the (D₂O, D⁺, Tf₂N^?, C₁C_nim⁺) entities in the lower or upper phases were determined. The addition of sodium perchlorate was found to enhance the Tf₂N^? solubility while inhibiting the solubility of the ionic liquid cation. Differences in IL cation and anion solubilities of up to 42 mM were evidenced. The consequences for the characterization of the aqueous biphasic system, the solvent extraction process of the metal ions, and the ecological impact of the ILs are discussed.     

Synthesis and Structure of Heterometallic Chromium(III) Complexes with Ethylenediaminetetraacetic Acid

The complexes [M(Tsc)₂][Cr(Edta)]₂, where M is Ni, Cu; Tsc is thiosemicarbazide; Edta^4– is the ethylenediaminetetraacetate anion, were synthesized and characterized by X-ray diffraction. The ionic structures are composed of the [M(Tsc)₂]²⁺ cations and [Cr(Edta)]^– anions with a component ratio of 1 : 2. The cation has a distorted trans-square coordination. The carboxyl groups of the H₄Edta molecule are deprotonated and the ligand is attached to the Cr atom in the hexadentate chelating mode. The cations and anions are linked by a system of hydrogen bonds.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 5, 2005, pp. 370–375.Original Russian Text Copyright © 2005 by Ciornea, Filippova, Gulea, Shova, Borta, Simonov.     

Aqueous Solutions of Ionic Liquids: Microscopic Assembly

Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure–property relationships of such systems is hence desirable. One of the crucial molecular‐level interactions that influences the macroscopic behavior is hydrogen bonding. In this work, we conduct molecular dynamics simulations to investigate the effects of ionic liquids on the hydrogen‐bond network of water in dilute aqueous solutions of ionic liquids with various combinations of cations and anions. Calculations are performed for imidazolium‐based cations with alkyl chains of different lengths and for a variety of anions, namely, [Br]^?, [NO₃]^?, [SCN]^?, [BF₄]^?, [PF₆]^?, and [Tf₂N]^?. The structure of water and the water–ionic liquid interactions involved in the formation of a heterogeneous network are analyzed by using radial distribution functions and hydrogen‐bond statistics. To this end, we employ the geometric criterion of the hydrogen‐bond definition and it is shown that the structure of water is sensitive to the amount of ionic liquid and to the anion type. In particular, [SCN]^? and [Tf₂N]^? were found to be the most hydrophilic and hydrophobic anions, respectively. Conversely, the cation chain length did not influence the results.     

[Mo(NPPh3)4]2+ [MoNCl3(NPPh3)]2− · C7H8, ein Phosphaniminato-Komplex mit einem Dikation von Molybdän(VI)

[Mo(NPPh₃)₄]²⁺ [MoNCl₃(NPPh₃)]₂^? · C₇H₈, a Phosphoraneiminato Complex with a Dication of Molybdenum(VI). The title compound was prepared by the reaction of MoNCl₃ with Me₃SiNPPh₃ in acetonitrile solution. Red single crystals separated upon addition of toluene. They were characterized by IR spectroscopy and by an X-ray structure determination. (Space group P1 , Z = 2, 6918 observed unique reflections, R = 0.059. Lattice dimensions at 20°C: a = 1 181.4, b = 2 021.4, c =2 409.7pm; α = 65.87°, β = 101.09°, γ= 78.97°). In the dication [Mo(NPPh₃)₄]²⁺ the molybdenum atom is surrounded in a tetrahedral fashion by the four nitrogen atoms of the phosphorane iminato ligands. The MoN and PN bond lengths correspond well with double bonds. In the two anions [MoNCl₃(NPPh₃)]^?, which occur in different conformations, the molybdenum atoms are fivefold coordinated by the terminal nitride ligand Mo?N: in axial positions and by the three chlorine atoms and the nitrogen atom of the (NPPh₃)^? ligand in the equatorial positions.     

Adsorption of51Cr(VI) on manganese dioxide from aqueous solution

Sorption of⁵¹Cr(VI) by MnO₂ has been studied as a function of pH and ionic concentration in the presence of certain added cations and anions. The findings are explained in the light of deprotonation/hydroxyl ion association reaction on oxide surface and its subsequent interaction with the tracer. Infrared spectroscopy has shown the chemical interaction of Cr(VI) on the surface of MnO₂. The influence of certain interfering ions has been shown on the sorption of⁵¹Cr(VI) on MnO₂ surface. An attempt has been made to concentrate traces of⁵¹Cr under optimum experimental conditions. The experimental observation shows that the activity sorbed under specified conditions can be recovered appreciably by leaching the pre-adsorbed carrier.     

Dinuclear cobalt and manganese squarate complexes with bidentate N-donor ligand: syntheses, crystal structures, spectroscopic, thermal and voltammetric studies

The crystal structures of [M₂(phen)₄(H₂O)₂(C₄O₄)]· C₄O₄· 8H₂O [M = Co²⁺ (1), Mn²⁺ (2); phen: 1,10-phenanthroline] complexes have been prepared and characterized by IR spectroscopy, thermal analysis and single X-ray diffraction techniques. Their structures consist of [Co₂(phen)₄(H₂O)₂(C₄O₄)]²⁺ (1) and [Mn₂(phen)₄(H₂O)₂(C₄O₄)]²⁺ (2) dinuclear cobalt(II) and manganese(II) cations, uncoordinated C₄O ₄ ^2? (SQ^2?) dianion and crystalization water molecules. In both complexes the metal ions have distorted octahedral geometry. The squarate adopts the μ-1,3 (1) and (2) bis(monodentate) coordination modes, the intradimer M–M separation being 8.053(7) Å (1) and 8.175(4) Å (2), respectively, while the other squarate acts as a counter anion. The voltammetric behaviour of complexes (1) and (2) was investigated in DMSO (dimethylsulfoxide) solution by cyclic voltammetry using n-Bu₄NClO₄ as supporting electrolyte. The complexes exhibit both metal and ligand centred electroactivity in the potential ?±1.75 V versus Ag/AgCl reference electrode. The dianion SQ^2? is oxidized in two consecutive steps to the corresponding radical monoanion and neutral form.