GO/Fe3O4/有机胺复合材料的制备及对结晶紫染料的吸附性能

用改进的Hummers法制备了氧化石墨烯,用乙二胺、乙二胺与丁二胺/己二胺混溶来改性氧化石墨烯。用水热法制备了Fe3O4,并用物理混合法制备了GO/Fe3O4/有机胺的三元复合体系。用透射电镜、扫描电镜、红外光谱、热重分析、X射线衍射、VSM和XPS等对所制得的样品进行了结构表征和性能测试,研究了三元复合粒子对结晶紫染料的吸附性能及影响结晶紫染料吸附效果的因素。结果表明:所制备的Fe3O4的平均粒径约为200 nm,粒径分布均匀;复合物中GO为典型的片状结构,GO及有机胺的掺杂没有影响Fe3O4的尖晶石结构;复合物为超顺磁性,Ms为53.0 emu·g~(-1)。吸附结果表明:石墨烯/Fe3O4/有机胺的三元复合材料对结晶紫染料的最大吸附量随浓度增大而增大,而吸附结晶紫染料的移除率却随结晶紫染料浓度增大而减小,并趋向一定值;乙二胺和己二胺混溶比例为5∶1的GO/Fe3O4复合材料吸附性能最佳:结晶紫浓度为400 mg·L~(-1),最大吸附量为164.3 mg·L~(-1)。     

Size dependent electron-phonon coupling in Li0.5Co0.1Fe2.4O4 nanoparticles investigated by Raman spectroscopy

The Raman spectra of Li_0.5Co_0.1Fe_2.4O₄ nanoparticles have been recorded in the spectral range, 400-800 cm⁻¹ at four different particle sizes. X-ray and TEM measurements were done to determine crystal structure and size of the nanoparticles. X-ray diffraction (XRD) shows that the Li_0.5Co_0.1Fe_2.4O₄ nanoparticles have an order phase spinel structure without any impurity. The size of the nanocrystal was calculated through XRD patterns and TEM micrographs and it turns out to be 34-42 nm. The Raman spectra of each size nanoparticles show five Raman bands. The most intense Raman band shows a noticeable asymmetrical feature towards lower wavenumber side. A line shape analysis was performed to get the exact spectral parameters of the Raman bands. The intensity of asymmetrical feature keeps on increasing with decreasing the particle size from 42 nm to 34 nm and finally evolved as a new Raman band. The appearance of new band and its intensity response relative to the intensity of the main Raman band as a function of particle size has been explained in terms of electron-phonon coupling. It was observed that the strength of electron-phonon coupling goes on increasing with reducing the particle size. The red shifting of the Raman bands upon reducing the crystalline size is explained in terms of the lattice expansion, which is well supported by the XRD data.     

Electrochemical kinetics and cycling performance of nano Li[Li0.23Co0.3Mn0.47]O2 cathode material for lithium ion batteries

Li[Li_0.23Co_0.3Mn_0.47]O₂ cathode material was prepared by a sol–gel method. The material had a primary particle size of about 100 nm, covered by a 30 Å of Li₂CO₃ layer. The material showed promising electrochemical performance when cycled up to 3C rate. The electrochemical kinetics of the first charge was much slower than that of the second charge, due to the complex electrochemical process which involved not only Li⁺ diffusion but also release of oxygen. By taking account of this, the material was pre-charged very slowly (C/50) in the first cycle. This led to excellent electrochemical performance in the following cycles. For instance, the 1C-rate capacity increased to 168 mA h g⁻¹ after 50 cycles, comparing with the 145 mA h g⁻¹ obtained without pre-charging.     

Effect of capping and particle size on Raman laser-induced degradation of γ-Fe2O3 nanoparticles

Diol capped γ-Fe₂O₃ nanoparticles are prepared from ferric nitrate by refluxing in 1,4-butanediol (9.5 nm) and 1,5-pentanediol (15 nm) and uncapped particles are prepared by refluxing in 1,2-propanediol followed by sintering the alkoxide formed. X-ray diffraction (XRD) shows that all the samples have the spinel phase. Raman spectroscopy shows that the samples prepared in 1,4-butanediol and 1,5-pentanediol and 1,2-propanediol (sintered at 573 and 673 K) are γ-Fe₂O₃ and the 773 K-sintered sample is Fe₃O₄. Raman laser studies carried out at various laser powers show that all the samples undergo laser-induced degradation to α-Fe₂O₃ at higher laser power. The capped samples are however, found more stable to degradation than the uncapped samples. The stability of γ-Fe₂O₃ sample with large particle size (15.4 nm) is more than the sample with small particle size (10.2 nm). Fe₃O₄ having a particle size of 48 nm is however less stable than the smaller γ-Fe₂O₃ nanoparticles.     

Synthesis and characterization of novel magnetic Fe3O4/polyphosphazene nanofibers

Novel magnetic Fe₃O₄/polyphosphazene nanofibers were successfully prepared via a facile approach by ultrasonic irradiation. The structure and morphology were characterized by SEM, TEM, EDX, IR and XRD. The characterization results show that the magnetic Fe₃O₄/polyphosphazene nanofibers are several microns in length and 50–100 nm in diameter with Fe₃O₄ nanoparticles of 5–10 nm attached on the surface. The interaction between Fe₃O₄ nanoparticles and polyphosphazene nanofibers was thought as coordination behavior. TG curves show that the magnetic Fe₃O₄/polyphosphazene nanofibers have good thermostability and high magnetism content of about 44%. Magnetic studies show that the magnetic nanofibers exhibit good superparamagnetic properties with high magnetization saturation value of about 36 emu/g.     

Li3PO4表面修饰提高球形LiNi0.5Mn1.5O4正极材料的性能

通过共沉淀法制备了球形LiNi_0.5Mn_1.5O₄@Li₃PO₄复合材料,并采用X射线衍射(XRD)、扫描电镜(SEM)、红外光谱(FT-IR)、循环伏安(CV)、电化学阻抗谱(EIS)及充放电测试研究了其结构与电化学性能.XRD和SEM表明,Li₃PO₄包覆影响了球形LiNi_0.5Mn_1.5O₄的晶格常数.CV和EIS表明,质量百分数5% Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄具有比纯LiNi_0.5Mn_1.5O₄更高的锂离子嵌脱可逆性,更大的锂离子扩散系数和更小的电荷转移电阻,说明在锂离子扩散过程中,质量百分数5%Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄具有更高的电子电导率.充放电测试表明,原位Li₃PO₄改性提高了材料的电子电导率、电化学活性,进而提高了高倍率放电容量.质量百分数5% Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄提高的电化学性能归因于Li₃PO₄的包覆、纳米颗粒组成球形的粒径引起的高的电子电导率和小的电化学极化.     

Synthesis of nanospherical Fe3BO6 anode material for lithium-ion battery by the rheological phase reaction method

This paper developed a novel method, the rheological phase reaction method, to synthesize nanospherical Fe₃BO₆. The sizes and morphologies of products vary with the calcination temperatures. Spherical particles with a uniform size about 40 nm in a monodisperse state were obtained at 800 °C, while the spherical particles with a larger size of 100-500 nm were obtained at 900 °C. The electrochemical properties of these Fe₃BO₆ nanospheres were investigated. Sample synthesized at 800 °C delivers a high reversible capacity above 500 mAh g⁻¹. Sample synthesized at 900 °C possesses relatively good cycleability with a capacity retaining of 376 mAh g⁻¹ after 10 cycles. The measurement of electrochemical impedance spectra for the first time indicated that smaller Fe₃BO₆ nanoparticles intend to give higher impedance of solid-electrolyte interface layer and lower charge-transfer impedance after the first discharge. Additionally, it can be speculated that the increase of resistance charge-transfer is the possible reason for the capacity fading during cycling.     

Hydrothermal synthesis of monodisperse Fe3O4 nanoparticles based on modulation of tartaric acid

In this paper, monodisperse Fe₃O₄ nanoparticles with single crystalline structure were synthesized via a facile environment-friendly method. And the size of the nanoparticles ranges from 10 nm to 15 nm. As-synthesized Fe₃O₄ were characterized by X-ray diffraction instrument (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectrometer and field emission transmission electron microscope (FE-TEM). The effect of tartaric acid (TA) amount on products was investigated by XRD and TEM. The results indicated that TA could commendably modulate the crystalline phase, morphology and size of nanometer Fe₃O_4. A possible generated mechanism of Fe₃O₄ crystals was proposed in virtue of UV–vis absorption spectra. Besides, the magnetic properties of as-synthesized Fe₃O₄ were detected.     

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>composite particles

Using Fe₃O₄ nano-particles as seeds, a new type of Fe₃O₄/Au composite particles with core/shell structure and diameter of about 170 nm was prepared by reduction of Au³⁺ with hydroxylamine in an aqueous solution. Particle size analyzer and transmission electron microscope were used to analyze the size distribution and microstructure of the particles in different conditions. The result showed that the magnetically responsive property and suspension stability of Fe₃O₄ seeds as well as reduction conditions of Au³⁺to Au⁰are the main factors which are crucial for obtaining a colloid of the Fe₃O₄/Au composite particles with uniform particle dispersion, excellent stability, homogeneity in particle sizes, and effective response to an external magnet in aqueous suspension solutions. UV-Vis analysis revealed that there is a characteristic peak of Fe₃O₄/Au fluid. For particles with d(0.5)=168 nm, the λmax is 625 nm.     

Li3PO4表面修饰提高球形LiNi0.5Mn1.5O4正极材料的性能

通过共沉淀法制备了球形LiNi_0.5Mn_1.5O₄@Li₃PO₄复合材料,并采用X射线衍射(XRD)、扫描电镜(SEM)、红外光谱(FT-IR)、循环伏安(CV)、电化学阻抗谱(EIS)及充放电测试研究了其结构与电化学性能。XRD和SEM表明,Li₃PO₄包覆影响了球形LiNi_0.5Mn_1.5O₄的晶格常数。CV和EIS表明,质量百分数5% Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄具有比纯LiNi_0.5Mn_1.5O₄更高的锂离子嵌脱可逆性,更大的锂离子扩散系数和更小的电荷转移电阻,说明在锂离子扩散过程中,质量百分数5%Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄具有更高的电子电导率。充放电测试表明,原位Li₃PO₄改性提高了材料的电子电导率、电化学活性,进而提高了高倍率放电容量。质量百分数5% Li₃PO₄包覆的LiNi_0.5Mn_1.5O₄提高的电化学性能归因于Li₃PO₄的包覆、纳米颗粒组成球形的粒径引起的高的电子电导率和小的电化学极化。     

A Facile synthesis of flower-like Co3O4 porous spheres for the lithium-ion battery electrode

The porous hierarchical spherical Co₃O₄ assembled by nanosheets have been successfully fabricated. The porosity and the particle size of the product can be controlled by simply altering calcination temperature. SEM, TEM and SAED were performed to confirm that mesoporous Co₃O₄ nanostructures are built-up by numerous nanoparticles with random attachment. The BET specific surface area and pore size of the product calcined at 280 °C are 72.5 m² g⁻¹ and 4.6 nm, respectively. Our experiments further demonstrated that electrochemical performances of the synthesized products working as an anode material of lithium-ion battery are strongly dependent on the porosity.     

PREPARATION OF Fe3O4/PSt MAGNETIC PARTICLES IN THE PRESENCE OF MAGNETIC FLUID IN ETHANOL/WATER MIXTURE*

Fe_3O_4/Polystyrene(PSt) magnetic particles with core/shell structure have been prepared in thepresence of Fe_3O_4 magnetic fluid in ethanol/water medium by dispersion polymeriation of styrene. A Fe_3O_4particle formation mechanism was proposed. According to this mechanism, the size of particle nuclei isdetermined by the extent of aggregation of Fe_3O_4 /oligomer. Magnetic particles with diameter ranging from 5to 200 μm were prepared under different reaction conditions. Some polymerization parameters such as theconcentration of monomer, stabilizer, initiator, and ethanol which affect particle size and size distribution arediscussed and their effect on particle formation are explained by the proposed mechanism.     

Determination of arsenic(III) and arsenic(V) binding to microwave assisted hydrothermal synthetically prepared Fe3O4, Mn3O4, and MnFe2O4 nanoadsorbents

The potential of the Fe₃O₄, Mn₃O₄, and MnFe₂O₄ nanophases for the removal of arsenic(III) and (V) from aqueous solutions was investigated using the batch technique. The structure and grain size of the nanoadsorbents were characterized using XRD and Secherrer's equation. The Fe₃O₄, Mn₃O₄, and MnFe₂O₄ had the crystal structure of magnetite, hausmannite, and Jacobsite, while the grain sizes were 28, 25, and 12 nm, respectively. It was found that the sorption determined using 100 ppb of either As(III) or (V) was pH independent from pH 2 through pH 6. However, at pH below 3 the nanomaterials released high concentrations of iron and manganese into solution. The amount of both As(III) and (V) per gram of adsorbent was found to increase with increasing concentration of As in solution. The XRD analysis showed no decrease in the average grain size of the nanoadsorbents reacted with 1000 ppm of either As(III) or (V) or a combination of 500 ppm of each As species. Finally Fe₃O₄, Mn₃O₄, and MnFe₂O₄ showed binding capacities (µg/g) of 32.2, 8.9, and 718 for As(III) and 1575, 212 and 2125 for As(V), respectively.     

Neutron diffraction study and superparamagnetic behavior of ZnFe2O4 nanoparticles obtained with different conditions

Spinel-type (S.G.= Fd3?m) ZnFe₂O₄ fine particles with sizes from 4 to 19 nm prepared by solvothermal and microwave-assisted solvothermal methods have been studied by neutron powder diffraction at room temperature. The cation distribution corresponding to mixed spinel structure (Zn²⁺_1−xFe³⁺_x)[Fe³⁺_2−xZn²⁺_x]O₄ along with the unit cell parameter has been estimated after Rietveld refinement of the obtained neutron diffraction data for all the samples. It has been found that the inversion degree parameter (x) takes values between 0.11 and 0.20 depending not only on the particle size but also on the synthesis conditions as well. All the samples behave as superparamagnetic with an effective magnetic moment per particle (μ_SP) from 7.0×10² to 7.7×10³ μ_B. The sample obtained by microwave assistance displays a different magnetic behavior as the ZFC and FC magnetic susceptibility and the magnetization versus applied field hysteresis loop measured at 5 K suggest. This is related with the dipole interactions that are a consequence of the higher inversion degree and μ_SP.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Synthesis and characterization of poly(3-thiophene acetic acid)/Fe3O4 nanocomposite

Poly(3-thiophene acetic acid)/Fe₃O₄ nanocomposite is synthesized by the precipitation of Fe₃O₄ in the presence of poly(3-thiophene acetic acid) (P3TAA). Structural, surface, morphological, thermal properties and conductivity characterization/evaluation of the nanocomposite were performed by XRD, FT-IR, TEM, TGA, and conductivity measurements, respectively. The capping of P3TAA around Fe₃O₄ nanoparticles was confirmed by FT-IR spectroscopy, the interaction being via bridging oxygens of the carboxylate and the nanoparticle surface through bidentate binding. The crystallite and particle size were obtained as 9 ± 2 nm and 11 ± 1 nm from XRD line profile fitting and TEM image analysis, respectively, which reveal nearly single crystalline nature of Fe₃O₄ nanoparticles. Magnetization measurements reveal that P3TAA coated magnetite particles do not saturate at higher fields. There is no coercivity and remanence revealing superparamagnetic character. Magnetic particle size calculated from the theoretical fitting as 9.1 nm which coincides the values determined from TEM micrographs and XRD line profile fitting. The comparison to the TEM particle size reveals slightly modified magnetically dead nanoparticle surface.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83A·m₂·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

锰源对燃烧法制备5V级正极材料LiNi0.5Mn1.5O4的影响

以硝酸锰和醋酸锰,采用蔗糖燃烧法制备锂离子电池正极材料LiNi0.5Mn1.5O4通过XRD、SEM、粒径分布测试、循环伏安、恒流充放电测试以及交流阻抗等方法,研究了醋酸锰和硝酸锰对产物的结构、形貌、粒径及电化学性能的影响。XRD测试结果表明样品的结构都为立方尖晶石型,属于Fd3m空间群。不同的锰源对材料的粒径及粒径分布有很大的影响。以醋酸锰为原料制得的材料的粒径较小并且分布更均匀,有利于锂离子的脱出和嵌入从而提高电化学性能。以醋酸锰为锰源制得的LiNi0.5Mn1.5O4在3.6~5.2 V的充放电电压范围内的电化学性能更好,1C(1C=140.0 mA.g-1)倍率的首次放电容量为144.5 mAh.g-1,循环100周后容量保持率为96%,在3C,5C,10C以及20C的放电容量分别为136.3,132.0,124.7以及96.6 mAh.g-1。     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核,聚合物为中间层,金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF-8)。首先利用溶剂热法制备Fe₃O₄纳米粒子,然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层,最后通过原位沉积法在PAA外部包覆ZIF-8。在对Fe₃O₄@PAA@ZIF-8的组成和结构进行表征的基础上,深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示Fe₃O₄@PAA@ZIF-8具有明显的三层结构,Fe₃O₄的平均粒径为117nm,PAA层厚度约为17 nm,ZIF-8层的厚度约为14 nm。Fe₃O₄@PAA@ZIF-8对MG的吸附量随着p H的升高而增大,吸附过程符合准二阶动力学模型和Langmuir等温吸附模...     

Synthesis and magnetic properties of nanocomposite Ni1?xCoxFe2O4–BaTiO3 fibers by organic gel-thermal decomposition process

Nanocomposites of ferrite and ferroelectric phases are attractive functional ceramic materials. In this work, the nanocomposite Ni_1−x Co _x Fe₂O₄–BaTiO₃(x = 0.2, 0.3, 0.4, 0.5) fibers with fine diameters of 3 ~ 7 μm and high aspect ratios were synthesized by the organic gel-thermal decomposition process from the raw materials of citric acid and metal salts. The structure, thermal decomposition process and morphologies of the gel precursors and the resultant fibers derived from thermal decomposition of the gel precursors were characterized by Fourier transform infrared spectroscopy, thermogravimetric differential thermal analysis, X-ray diffraction and scanning electron microscopy. The magnetic properties of the nanocomposite fibers were measured by vibrating sample magnetometer. The nanocomposite fibers of ferrite Ni_1−x Co _x Fe₂O₄ and perovskite BaTiO₃ are formed at the calcination temperature of 900 °C for 2 h. The average grain sizes of Ni_1−x Co _x Fe₂O₄ and BaTiO₃ in the nanocomposite fibers increase from about 15 nm to approximately 67 nm with the increasing calcination temperatures from 900 to 1,180 °C. The saturation magnetization of the nanocomposite Ni_1−x Co _x Fe₂O₄–BaTiO₃(x = 0.2, 0.3, 0.4, 0.5) fibers increases with the increase of grain sizes of Ni_1−x Co _x Fe₂O₄ and Co content, while the coercivity reaches a maximum value at the single-domain size of about 65 nm of Ni_0.5Co_0.5Fe₂O₄ obtained at the calcination temperature of 1,100 °C.