A highly selective colorimetric and ratiometric two-photon fluorescent probe for fluoride ion detection

A naphthalimide-based highly selective colorimetric and ratiometric fluorescent probe for the fluoride ion displayed both one- and two-photon ratiometric changes. Upon reaction with the F(-) (TBA(+) and Na(+) salts) anion in CH(3)CN as well as in aqueous buffer solution, probe 1 shows dramatic color changes from colorless to jade-green and remarkable ratiometric fluorescence enhancements signals. These properties are mechanistically ascribed to a fluoride-triggered Si-O bond cleavage that resulted in a green fluorescent 4-amino-1,8-naphthalimide.     

A ratiometric probe for the selective time-gated luminescence detection of potassium in water

A europium probe for the ratiometric detection of potassium in water is presented. This probe demonstrates high sensitivity, with an affinity for K(+) in the mM range, and high selectivity for K(+) over Na(+), Ca(2+), Mg(2+) and Li(+). The long luminescence lifetime of the probe and its large Stokes shift further enable accurate determination of the concentration of K(+) in complex aqueous media.     

A highly selective colorimetric and ratiometric fluorescent chemodosimeter for imaging fluoride ions in living cells

A simple but highly selective colorimetric and ratiometric fluorescent chemodosimeter was designed and synthesized to detect fluoride ions (F(-)) in aqueous solution and living cells by virtue of the strong affinity of F(-) toward silicon.     

A new selective fluorescent probe for lead ions

A new fluorescent probe(BPbl) for Pb~(2+) has been synthesized,where diethanolamine(receptor) is linked with 4,4-difluoro-4-bora-3a, 4a-diaza-s-indacene(BODIPY)(fluorophore) via a methylene group(spacer).The absorption(496 nm) and emission (505 nm) wavelengths are in visible range.The fluorescence quantum yields of the lead-free and lead-bound states of BPb_1 in acetonitrile are 0.013 and 0.693,respectively.The large chelation enhanced fluorescence effect(CHEF) with Pb~(2+) can be explained by the blocki...     

A highly selective fluorescent probe for thiol bioimaging

A new fluorescent turn-on probe (3) for the selective sensing and bioimaging of thiols is reported. In aqueous buffer solutions at physiological pH, thiols cleave the 2,4-dinitrobenzenesulfonyl group to release the red-emissive donor-acceptor fluorophore (4). The probe displays excellent immunity to interference from nitrogen and oxygen nucleophiles and the imaging of thiols in living cells is demonstrated.     

A highly selective fluorescent chemosensor for lead ions

A simple fluorescent chemosensor 1 exhibits a 40-fold fluorescence enhancement upon addition of lead ion and yet is insensitive to most of univalent and divalent metal ions. The high affinity of 1 toward Pb2+ presumably results from the cooperative binding behaviors of two potential metal binding sites: the dicarbonyl and the 15-monoazacrown-5 ether.     

A highly selective fluorescent probe for nanomolar detection of ferric ions in the living cells and aqueous media

A dipodal fluorescent probe 3, with imine and hydroxyl moieties as binding sites, has been synthesized and characterized with spectroscopic methods, single-crystal X-ray techniques, and DFT. The synthesized probe 3 (φ = 0.0028) showed highly sensitive and highly specific fluorescent ‘turn-on’ effect (λ_em = 453 nm) for the 1:1 binding with Fe³⁺ ions to form probe 3.Fe³⁺ complex (φ = 0.203) in semi-aqueous medium (acetonitrile:water (50:50; v/v)) and live cells. The 1:1 binding stoichiometry of probe 3 and Fe³⁺ ions was proposed by DFT calculations and confirmed by the NMR spectroscopy, crystal structures of probe 3 and 3.Fe³⁺ complex, and mass spectrum of probe 3.Fe³⁺ complex. The stability of probe 3.Fe³⁺ complex in a wide pH range (pH 2–12) and reversibility for binding with Fe³⁺ ions in the presence of EDTA indicates that it can be an effective chemosensor for the detection of Fe³⁺ ions in various samples, including living cells. Importantly, with the LOD of 21.5 nM for the detection of Fe³⁺ ions, probe 3 did not show any interference from potentially competing ions even at a 1:3 ratio, indicates its biocompatibility. The nanomolar limit of detection (21.5 nM), cell permeability, and low cytotoxicity allows the probe 3 to be an excellent tool for the live-cell imaging and detection of ferric ions in live cells.     

A selective and ratiometric bifunctional fluorescent probe for Al3+ ion and proton

A new bifunctional probe based on a pyrene-amino acid conjugate for the differential response of Al(3+) and H(+) was demonstrated for the first time. Interestingly, two solvent-dependent sensing mechanisms for Al(3+), which feature a ratiometric change from excimer to monomer in CH(3)OH and a turn-on response in water, are also disclosed.     

A highly selective colorimetric and turn-on fluorescent probe for cyanide anion

A new colorimetric and turn-on fluorescence chemosensor was developed for cyanide anion with high selectivity in the presence of other anions in an aqueous THF solution. The sensing mechanism is attributed to the interruption of π-conjugation by a nucleophilic addition of cyanide to the β-position of a dicyanoethylene unit.     

A highly selective and sensitive fluorescence probe for the hypochlorite anion

A new rhodamine B-based fluorescent probe for the hypochlorite anion (OCl(-)) has been designed, synthesized, and characterized. The probe comprises a spectroscopic unit of rhodamine B and an OCl(-)-specific reactive moiety of dibenzoylhydrazine. The probe itself is nearly nonfluorescent because of its spirolactam structure. Upon reaction with OCl(-), however, a largely enhanced fluorescence is produced due to the opening of the spirolactam ring by the oxidation of the exocyclic hydrazide and subsequently the formation of the hydrolytic product rhodamine B. Most notably, the fluorescence-on reaction shows high sensitivity and extremely high selectivity for OCl(-) over other common ions and oxidants, which makes it possible for OCl(-) to be detected directly in their presence. In addition, the reaction mechanism has been investigated and proposed. The OCl(-) anion selectively oxidizes the hydrazo group in the probe, and forms the analogue of dibenzoyl diimide, which in turn hydrolyzes and releases the fluorophore. The reaction mechanism that is described here might be useful in developing excellent spectroscopic probes with cleavable active bonds for other species.     

A highly selective fluorescent probe for pyrophosphate in aqueous solution

A new 4-amino-1,8-naphthalimide-based fluorescent chemosensor bearing a guanidiniocarbonyl pyrrole moiety has been synthesized. The sensor displays a selective fluorescent enhancement with pyrophosphate over ATP, ADP, AMP and other inorganic anions in aqueous solution.     

A highly selective and synthetically facile aqueous-phase cyanide probe

Disperse Orange 3 (4-(4-nitrophenylazo)aniline)-based chemosensor 1 has been prepared. This structurally simple receptor displays great selectivity for the cyanide anion over other common inorganic anions in aqueous environment and can detect cyanide in water sample at micromolar concentrations.     

A coumarin-based colorimetric and fluorescent probe for the highly selective detection of Au3+ ions

We develop a novel coumarin-alkyne derivative(NC7-AL), which can specifically react with Au~(3+) and give a colorimetric and fluorescent ‘‘turn-on' response toward Au~(3+). Notably, other alkynophilic metal species such as Au+, Ag+, Pd~(2+), Ni~(2+), Cu~(2+), and Hg~(2+) do not produce an interfering signal. A good linear relationship between emission intensity at 420 nm and Au~(3+) concentration from 0 to 2 equivalent is observed, and the detection limit(3s/k) is estimated to be ca. 3.58 nmol/L. Harnessing the Au~(3+)-induced color change from light yellow to colorless, we find that NC7-AL-based modified TLC plate can be used for convenient naked-eye detection of Au~(3+).     

A series of coordination polymers constructed from mixed ligands for highly selective luminescence sensing of Fe3+ ions

Transition Metal Chemistry - Four coordination polymers, namely {[Cd2(1,4-NDC)2(dbp)2]·DMF}n (1), {[Cd(1,4-NDC)(dbp)(H2O)]}n (2), {[Zn(2,6-NDC)(dbp)(H2O)]}n (3), and...     

A ratiometric luminescence probe for highly reactive oxygen species based on lanthanide complexes

Reactive oxygen species (ROS) are important mediators in a variety of pathological events, but the oxidative stress owing to excessive generation of ROS is implicated in many human diseases. In this work, we designed and synthesized a novel dual-functional chelating ligand, [4'-(p-aminophenoxy)methylene-2,2':6',2'-terpyridine-6,6'-diyl]bis(methylenenitrilo)tetrakis(acetic acid) (AMTTA), that can strongly coordinate with both Eu(3+) and Tb(3+) in aqueous solutions for the recognition and time-gated luminescence detection of highly ROS (hROS), hydroxyl radical ((?)OH), and hypochlorite (ClO(-)). The complexes AMTTA-Ln(3+) (Ln = Eu and Tb) are almost nonluminescent because of the photoinduced electron transfer from the electron-rich aminophenyl group to the terpyridine-Ln(3+) moiety but can rapidly react with hROS to afford highly luminescent complexes (4'-hydroxymethyl-2,2':6',2'-terpyridine-6,6'-diyl)bis(methylenenitrilo)tetrakis(acetate)-Ln(3+) (HTTA-Ln(3+)). Interestingly, when the AMTTA-Eu(3+)/Tb(3+) mixture (AMTTA/Eu(3+)/Tb(3+) = 2/1/1) was reacted with hROS, the intensity ratio of its Tb(3+) emission at 540 nm to its Eu(3+) emission at 610 nm, I(540)/I(610), showed a ratiometric response toward hROS, and the dose-dependent increase of the ratio displayed a double-exponential correlation to the concentration of hROS. This unique luminescence response allowed the AMTTA-Eu(3+)/Tb(3+) mixture to be used as a ratiometric probe for the time-gated luminescence detection of hROS.     

A BODIPY-indole conjugate as a colorimetric and fluorometric probe for selective fluoride anion detection

A BODIPY-indole conjugate, 1, behaves as a colorimetric and fluorometric probe for selective and sensitive detection of F⁻. Compound 1 interacts with F⁻ in a 1:1 stoichiometry via a hydrogen bonding interaction between the indolic NH proton and F⁻, leading to clear color change from blue to green and quenching of orange fluorescence.     

A highly selective bicyclic fluoroionophore for the detection of lithium ions

The macrobicyclic molecule, 21-(9-anthrylmethyl)-4,17,13,16-tetraoxa-1,10,21-triazabicyclo [8.8.5]tricosane-19,23-dione, I, was designed, synthesized and characterized as a fluoroionophore for the selective, optical detection of lithium ions. Compound I is based on a bridged diazacrown structure, which provides a semirigid binding framework. Binding takes place by electrostatic interactions between the oxygen atoms of the crown and the cation and is transduced to fluorescence emission from an attached anthracene fluorophore. In a 75:25 dichloromethane/tetrahydrofuran solvent mixture, I acts as an intramolecular electron transfer "off-on" fluorescence switch, exhibiting a greater than 190-fold enhancement in fluorescence emission intensity in the presence of lithium ions. The relative selectivity of I for lithium ions over sodium, potassium and ammonium ions was found to be log K(Li+,Na+) approximately -3.36, log K(Li+,K+) approximately -1.77 and log K(Li+,NH4+) approximately -2.78.