Probing the 5f orbital contribution to the bonding in a U(V) ketimide complex

Reaction of UCl(4) with 5 equiv of Li(N═C(t)BuPh) generates the homoleptic U(IV) ketimide complex [Li(THF)(2)][U(N═C(t)BuPh)(5)] (1) in 71% yield. Similarly, reaction of UCl(4) with 5 equiv of Li(N═C(t)Bu(2)) affords [Li(THF)][U(N═C(t)Bu(2))(5)] (2) in 67% yield. Oxidation of 2 with 0.5 equiv of I(2) results in the formation of the neutral U(V) complex U(N═C(t)Bu(2))(5) (3). In contrast, oxidation of 1 with 0.5 equiv of I(2), followed by addition of 1 equiv of Li(N═C(t)BuPh), generates the octahedral U(V) ketimide complex [Li][U(N═C(t)BuPh)(6)] (4) in 68% yield. Complex 4 can be further oxidized to the U(VI) ketimide complex U(N═C(t)BuPh)(6) (5). Complexes 1-5 were characterized by X-ray crystallography, while SQUID magnetometry, EPR spectroscopy, and UV-vis-NIR spectroscopy measurements were also preformed on complex 4. Using this data, the crystal field splitting parameters of the f orbitals were determined, allowing us to estimate the amount of f orbital participation in the bonding of 4.     

High-valent uranium alkyls: evidence for the formation of U(VI)(CH2SiMe3)6

Oxidation of [Li(DME)(3)][U(CH(2)SiMe(3))(5)] with 0.5 equiv of I(2), followed by immediate addition of LiCH(2)SiMe(3), affords the high-valent homoleptic U(V) alkyl complex [Li(THF)(4)][U(CH(2)SiMe(3))(6)] (1) in 82% yield. In the solid-state, 1 adopts an octahedral geometry as shown by X-ray crystallographic analysis. Addition of 2 equiv of tert-butanol to [Li(DME)(3)][U(CH(2)SiMe(3))(5)] generates the heteroleptic U(IV) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(3)] (2) in high yield. Treatment of 2 with AgOTf fails to produce a U(V) derivative, but instead affords the U(IV) complex (Me(3)SiCH(2))Ag(μ-CH(2)SiMe(3))U(CH(2)SiMe(3))(O(t)Bu)(2)(DME) (3) in 64% yield. Complex 3 has been characterized by X-ray crystallography and is marked by a uranium-silver bond. In contrast, oxidation of 2 can be achieved via reaction with 0.5 equiv of Me(3)NO, producing the heteroleptic U(V) complex [Li(DME)(3)][U(O(t)Bu)(2)(CH(2)SiMe(3))(4)] (4) in moderate yield. We have also attempted the one-electron oxidation of complex 1. Thus, oxidation of 1 with U(O(t)Bu)(6) results in formation of a rare U(VI) alkyl complex, U(CH(2)SiMe(3))(6) (6), which is only stable below -25 °C. Additionally, the electronic properties of 1-4 have been assessed by SQUID magnetometry, while a DFT analysis of complexes 1 and 6 is also provided.     

Synthesis, X-ray Crystal Structure Determination, and NMR Spectroscopic Investigation of Two Homoleptic Four-Coordinate Lanthanide Complexes: Trivalent ((t)Bu(2)P)(2)La[(&mgr;-P(t)Bu(2))(2)Li(thf)] and Divalent Yb[(&mgr;-P(t)Bu(2))(2)Li(thf)](2)(,)(1)

La(OSO(2)CF(3))(3) reacts with 4 equiv of LiP(t)Bu(2) in tetrahydrofuran to give dark red ((t)Bu(2)P)(2)La[(&mgr;-P(t)Bu(2))(2)Li(thf)] (1). Yb(OSO(2)CF(3))(3) reacts with LiP(t)Bu(2) in tetrahydrofuran in a 1:5 ratio to produce Yb[(&mgr;-P(t)Bu(2))(2)Li(thf)](2) (2) and 1/2 an equiv of (t)Bu(2)P-P(t)Bu(2). Both 1 and 2 crystallize in the monoclinic space group P2(1)/c. Crystal data for 1 at 214 K: a = 11.562 (1) ?, b = 15.914 (1) ?, c = 25.373 (3) ?, beta = 92.40 (1) degrees; V = 4664.5 ?(3); Z = 4; D(calcd) = 1.137 g cm(-)(3); R(F)() = 2.61%. Crystal data for 2 at 217 K: a = 21.641 (2) ?, b = 12.189 (1) ?, c = 20.485 (2) ?, beta = 109.01 (1) degrees; V = 5108.9 ?(3); Z = 4; D(calcd) = 1.185 g cm(-)(3); R(F)() = 2.80%. The molecular structures of 1 and 2 show the four-coordinate lanthanide atoms in distorted tetrahedral environments. These complexes are the first representatives of the lanthanide elements surrounded by four only-phosphorus-containing substituents. The main features of the crystal structure of 1 are the shortest La-P distances (2.857(1) and 2.861(1) ?) reported so far and a three-coordinate lithium cation. The molecular structure of 2 represents a divalent bis "ate" complex with two three-coordinate lithium cations. Complex 2 shows photoluminescent properties. VT NMR spectra ((7)Li and (31)P) are reported for 1and 2.     

Aluminium complexes containing bidentate and symmetrical tridentate pincer type pyrrolyl ligands: synthesis, reactions and ring opening polymerization

A series of aluminium derivatives containing substituted bidentate and symmetrical tridentate pyrrolyl ligands, [C(4)H(3)NH(2-CH(2)NH(t)Bu)] and [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)], in toluene or diethyl ether were synthesized. Their reactivity and application for the ring opening polymerization of ε-caprolactone have been investigated. The reaction of AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at room temperature affords [C(4)H(3)N(2-CH(2)NH(t)Bu)]AlMe(2) (1) in 70% yield by elimination of one equiv. of methane. Interestingly, while reacting AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at 0 °C followed by refluxing at 100 °C, [{C(4)H(3)N(2-CH(2)N(t)Bu)}AlMe](2) (2) has been isolated via fractional recrystalliztion in 30% yield. Similarly, reacting AlMe(3) with two equiv. of C(4)H(3)NH(2-CH(2)NH(t)Bu) generates [C(4)H(3)N(2-CH(2)NH(t)Bu)](2)AlMe (3) in a moderate yield. Furthermore, complex 1 can be transformed to an aluminium alkoxide derivative, [C(4)H(3)N(2-CH(2)NH(t)Bu)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlMe (4) by reacting 1 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in toluene via the elimination of one equiv. of methane. The reaction of AlR(3) with one equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] in toluene at room temperature affords [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlR(2) (5, R = Me; 6, R = Et) in moderate yield. Surprisingly, from the reaction of two equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] with LiAlH(4) in diethyl ether at 0 °C, a novel complex, [C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NH(t)Bu)](2)AlLi (7) has been isolated after repeating re-crystallization. Furthermore, reacting one equiv. of C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2) with AlH(3)·NMe(3) in diethyl ether generates an aluminium dihydride complex, [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlH(2) (8), in high yield. Additionally, treating 8 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in methylene chloride produces [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlH (9) with the elimination of one equiv. of H(2). The aluminium alkoxide complex 4 shows moderate reactivity toward the ring opening polymerization of ε-caprolatone in toluene.     

Syntheses, luminescence behavior, and assembly reaction of tetraalkynylplatinate(II) complexes: crystal structures of [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3) and [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)

A series of tetraalkynylplatinate(II) complexes, (NBu(4))(2)[Pt(Ctbd1;CR)(4)] (R = C(6)H(4)N-4, C(6)H(4)N-3, and C(6)H(3)N(2)-5), and the diynyl analogues, (NBu(4))(2)[Pt(Ctbd1;CCtbd1;CR)(4)] (R = C(6)H(5) and C(6)H(4)CH(3)-4), have been synthesized. These complexes displayed intense photoluminescence, which was assigned as metal-to-ligand charge transfer (MLCT) transitions. Reaction of (Bu(4)N)(2)[Pt(Ctbd1;CC(5)H(4)N-4)(4)] with 4 equiv of [Pt((t)Bu(3)trpy)(MeCN)](OTf)(2) in methanol did not yield the expected pentanuclear platinum product, [Pt(Ctbd1;CC(5)H(4)N)(4)[Pt((t)Bu(3)trpy)](4)](OTf)(6), but instead afforded a strongly luminescent 4-ethynylpyridine-bridged dinuclear complex, [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3,) which has been structurally characterized. The emission origin is assigned as derived from states of predominantly (3)MLCT [d(pi)(Pt) --> pi((t)Bu(3)trpy)] character, probably mixed with some intraligand (3)IL [pi --> pi(Ctbd1;C)], and ligand-to-ligand charge transfer (3)LLCT [pi(Ctbd1;C) --> pi((t)()Bu(3)trpy)] character. On the other hand, reaction of (Bu(4)N)(2)[Pt(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(4)] with [Ag(MeCN)(4)][BF(4)] gave a mixed-metal aggregate, [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)]. The crystal structure of [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)] has also been determined. A comparison study of the spectroscopic properties of the hexanuclear platinum-silver complex with its precursor complex has been made and their spectroscopic origins were suggested.     

Synthetic and structural investigations of monomeric dilithium boraamidinates and bidentate NBNCN ligands with bulky N-bonded groups

The dilithiated boraamidinate complexes [Li(2)[PhB(NDipp)(2)](THF)(3)] (7a) (Dipp = 2,6-diisopropylphenyl) and [Li(2)[PhB(NDipp)(N(t)Bu)](OEt(2))(2)] (7b), prepared by reaction of PhB[N(H)Dipp][N(H)R'] (6a, R' = Dipp; 6b, R' = (t)Bu) with 2 equiv of (n)BuLi, are shown by X-ray crystallography to have monomeric structures with two terminal and one bridging THF ligands (7a) or two terminal OEt(2) ligands (7b). The derivative 7a is used to prepare the spirocyclic group 13 derivative [Li(OEt(2))(4)][In[PhB(NDipp)(2)](2)] (8a) that is shown by an X-ray structural analysis to be a solvent-separated ion pair. The monoamino derivative PhBCl[N(H)Dipp] (9a), obtained by the reaction of PhBCl(2) with 2 equiv of DippNH(2), serves as a precursor for the synthesis of the four-membered BNCN ring [[R'N(H)](Ph)B(mu-N(t)Bu)(2)C(n)Bu] (10a, R' = Dipp). The X-ray structures of 6a, 9a, and 10a have been determined. The related derivative 10b (R' = (t)Bu) was synthesized by the reaction of [Cl(Ph)B(mu-N(t)Bu)(2)C(n)Bu] with Li[N(H)(t)Bu] and characterized by (1)H, (11)B, and (13)C NMR spectra. In contrast to 10a and 10b, NMR spectroscopic data indicate that the derivatives [[DippN(H)](Ph)B(NR')(2)CR(NR')] (11a: R =( t)Bu, R' = Cy; 11b: R = (n)Bu, R' = Dipp) adopt acyclic structures with three-coordinate boron atoms. Monolithiation of 10a produces the novel hybrid boraamidinate/amidinate (bamam) ligand [Li[DippN]PhB(N(t)Bu)C(n)Bu(N(t)Bu)] (12a).     

Synthesis and reactivity of cationic niobium and tantalum methyl complexes supported by imido and β-diketiminato ligands

The synthesis and reactivity of the cationic niobium and tantalum monomethyl complexes [(BDI)MeM(N(t)Bu)][X] (BDI = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-(i)Pr(2)C(6)H(3); M = Nb, Ta; X = MeB(C(6)F(5))(3), B(C(6)F(5))(4)] was investigated. The cationic alkyl complexes failed to irreversibly bind CO but formed phosphine-trapped acyl complexes [(BDI)(R(3)PC(O)Me)M(N(t)Bu)][B(C(6)F(5))(4)] (R = Et, Cy) in the presence of a combination of trialkylphosphines and CO. Treatment of the monoalkyl cationic Nb complex with XylNC (Xyl = 2,6-Me(2)-C(6)H(3)) resulted in irreversible formation of the iminoacyl complex [(BDI)(XylN[double bond, length as m-dash]C(Me))Nb(N(t)Bu)][B(C(6)F(5))(4)], which did not bind phosphines but would add a methide group to the iminoacyl carbon to provide the known ketimine complex (BDI)(XylNCMe(2))Nb(N(t)Bu). Further stoichiometric chemistry explored i) migratory insertion reactions to form new alkoxide, amidinate, and ketimide complexes; ii) protonolysis reactions with Ph(3)SiOH to form thermally robust cationic siloxide complexes; and iii) catalytic high-density polyethylene formation mediated by the cationic Nb methyl complex.     

Cubic and spirocyclic radicals containing a tetraimidophosphate dianion [P(NR)3(NR')]*2-

The reaction of Cl(3)PNSiMe(3) with 3 equiv of LiHNR (R = (i)Pr, Cy, (t)Bu, Ad) in diethyl ether produces the corresponding tris(amino)(imino)phosphoranes (RNH)(3)PNSiMe(3) (1a, R = (i)Pr; 1b, R = Cy; 1c, R = (t)Bu; 1d, R = Ad); subsequent reactions of 1b-d with (n)BuLi yield the trilithiated tetraimidophosphates {Li(3)[P(NR)(3)(NSiMe(3))]} (2a, R = Cy; 2b, R = (t)Bu; 2c, R = Ad). The reaction of [((t)BuNH)(4)P]Cl with 1 equiv of (n)BuLi results in the isolation of ((t)BuNH)(3)PN(t)Bu (1e); treatment of 1e with additional (n)BuLi generates the symmetrical tetraimidophosphate {Li(3)[P(N(t)Bu)(4)]} (2d). Compounds 1 and 2 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy; X-ray structures of 1b,c were also obtained. Oxidations of 2a-c with iodine, bromine, or sulfuryl chloride produces transient radicals in the case of 2a or stable radicals of the formula {Li(2)[P(NR)(3)(NSiMe(3))]LiX.3THF}* (X = Cl, Br, I; R = (t)Bu, Ad). The stable radicals exhibit C(3) symmetry and are thought to exist in a cubic arrangement, with the monomeric LiX unit bonded to the neutral radical {Li(2)[P(NR)(3)(NSiMe(3))]}* to complete the Li(3)N(3)PX cube. Reactions of solvent-separated ion pair {[Li(THF)(4)]{Li(THF)(2)[(mu-N(t)Bu)(2)P(mu-N(t)Bu)(2)]Li(THF)(2)} (6) with I(2) or SO(2)Cl(2) produce the persistent spirocyclic radical {(THF)(2)Li(mu-N(t)Bu)(2)P(mu-N(t)Bu)Li(THF)(2)}* (10a); all radicals have been characterized by a combination of variable concentration EPR experiments and DFT calculations.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Synthesis and group 4 complexes of tris(pyrrolyl-alpha-methyl)amine

The tetradentate, trianionic ligand tris(pyrrolyl-alpha-methyl)amine (H(3)tpa) is available in 84% yield in a single step by a triple Mannich reaction involving 3 equiv of pyrrole, 3 equiv of formaldehyde, and ammonium chloride. The new ligand is readily placed on titanium by transamination on Ti(NMe(2))(4), which generates Ti(NMe(2))(tpa) (1) in 73% yield. Treating 1 with 1 equiv of 1,3-dimethyl-2-iminoimidazolidine (H-imd) in toluene provided a rare example of a titanium 2-iminoimidazolidinide, which displays some interesting structural features. Of note is the Ti-N(imd) distance of 1.768(2) A, a typical Ti-N double to triple bond distance. Reaction of Zr(NMe(2))(4) with H(3)tpa gave a complex of variable composition, probably varying in the amount of labile dimethylamine retained. However, stable discreet compounds were available by addition of THF, pyridine, or 4,4'-di-tert-butyl-2,2'-bipyridine (Bu(t)bpy) to in situ generated Zr(NMe(2))(NHMe(2))(x)(tpa). Three chloro zirconium complexes were generated using three different strategies. Treating Zr(tpa)(NMe(2))(Bu(t)bpy) (5) with ClSiMe(3) afforded Zr(tpa)(Cl)(Bu(t)bpy) (6) in 92% yield. Reaction of Li(3)tpa with ZrCl(4)(THF)(2) in THF gave a 72% yield of ZrCl(tpa)(THF)(2) (7). In addition, treatment of ZrCl(NMe(2))(3) with H(3)tpa cleanly generated ZrCl(NHMe(2))(2)(tpa) (8) in 95% yield. An organometallic zirconium complex was generated on treatment of 6 with LiCtbd1;CPh; alkynyl Zr(Ctbd1;CPh)(tpa)(Bu(t)bpy) (9) was isolated in 62% yield. 1, Ti(imd)(tpa) (2), 6, and 9 were characterized by X-ray diffraction.     

Preparation and x-ray structures of alkali-metal derivatives of the ambidentate anions [tBuN(E)P(mu-NtBu)2P(E)NtBu]2- (E = S, Se) and [tBuN(Se)P(mu-NtBu)2PN(H)tBu)]-

The ambidentate dianions [(t)BuN(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu](2)(-) (5a, E = S; 5b, E = Se) are obtained as their disodium and dipotassium salts by the reaction of cis-[(t)Bu(H)N(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (6a, E = S; 6b, E = Se), with 2 equiv of MN(SiMe(3))(2) (M = Na, K) in THF at 23 degrees C. The corresponding dilithium derivative is prepared by reacting 6a with 2 equiv of (t)BuLi in THF at reflux. The X-ray structures of five complexes of the type [(THF)(x)()M](2)[(t)BuN(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu] (9, M = Li, E = S, x = 2; 11a/11b, M = Na, E = S/Se, x = 2; 12a, M = K, E = S, x = 1; 12b, M = K, E = Se, x = 1.5) have been determined. In the dilithiated derivative 9 the dianion 5a adopts a bis (N,S)-chelated bonding mode involving four-membered LiNPS rings whereas 11a,b and 12a,b display a preference for the formation of six-membered MNPNPN and MEPNPE rings, i.e., (N,N' and E,E')-chelation. The bis-solvated disodium complexes 11a,b and the dilithium complex 9 are monomeric, but the dipotassium complexes 12a,b form dimers with a central K(2)E(2) ring and associate further through weak K.E contacts to give an infinite polymeric network of 20-membered K(6)E(6)P(4)N(4) rings. The monoanions [(t)Bu(H)N(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu)](-) (E = S, Se) were obtained as their lithium derivatives 8a and 8b by the reaction of 1 equiv of (n)BuLi with 6a and 6b, respectively. An X-ray structure of the TMEDA-solvated complex 8a and the (31)P NMR spectrum of 8b indicate a N,E coordination mode. The reaction of 6b with excess (t)BuLi in THF at reflux results in partial deselenation to give the monolithiated P(III)/P(V) complex [(THF)(2)Li[(t)BuN(Se)P(mu-N(t)Bu)(2)PN(H)(t)Bu]] 10, which adopts a (N,Se) bonding mode.     

Lithiation of (tBuNH)3PNSiMe3 and formation of tetraimidophosphate complexes containing M3O3 rings (M = Li, K): X-ray structure of the stable radical [(Me3SiN)P(mu3-N(t)Bu)3[mu3-Li(THF)]3(OtBu))

The reaction of ((t)BuNH)(3)PNSiMe(3) (1) with 1 equiv of (n)BuLi results in the formation of Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] (2); treatment of 2 with a second equivalent of (n)BuLi produces the dilithium salt Li(2)[P(NH(t)Bu)(N(t)Bu)(2)(NSiMe(3))] (3). Similarly, the reaction of 1 and (n)BuLi in a 1:3 stoichiometry produces the trilithiated species Li(3)[P(N(t)Bu)(3)(NSiMe(3))] (4). These three complexes represent imido analogues of dihydrogen phosphate [H(2)PO(4)](-), hydrogen phosphate [HPO(4)](2)(-), and orthophosphate [PO(4)](3)(-), respectively. Reaction of 4 with alkali metal alkoxides MOR (M = Li, R = SiMe(3); M = K, R = (t)Bu) generates the imido-alkoxy complexes [Li(3)[P(N(t)Bu)(3)(NSiMe(3))](MOR)(3)] (8, M = Li; 9, M = K). These compounds were characterized by multinuclear ((1)H, (7)Li, (13)C, and (31)P) NMR spectroscopy and, in the cases of 2, 8, and 9.3THF, by X-ray crystallography. In the solid state, 2 exists as a dimer with Li-N contacts serving to link the two Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] units. The monomeric compounds 8 and 9.3THF consist of a rare M(3)O(3) ring coordinated to the (LiN)(3) unit of 4. The unexpected formation of the stable radical [(Me(3)SiN)P(mu(3)-N(t)Bu)(3)[mu(3)-Li(THF)](3)(O(t)Bu)] (10) is also reported. X-ray crystallography indicated that 10 has a distorted cubic structure consisting of the radical dianion [P(N(t)Bu)(3)(NSiMe(3))](.2)(-), two lithium cations, and a molecule of LiO(t)Bu in the solid state. In dilute THF solution, the cube is disrupted to give the radical monoanion [(Me(3)SiN)((t)BuN)P(mu-N(t)Bu)(2)Li(THF)(2)](.-), which was identified by EPR spectroscopy.     

Cationic Ti(IV) and neutral Ti(III) titanocene-phosphinoaryloxide frustrated Lewis pairs: hydrogen activation and catalytic amine-borane dehydrogenation

Titanium-phosphorus frustrated Lewis pairs (FLPs) based on titanocene-phosphinoaryloxide complexes have been synthesised. The cationic titanium(IV) complex [Cp(2)TiOC(6)H(4)P((t)Bu)(2)][B(C(6)F(5))(4)] 2 reacts with hydrogen to yield the reduced titanium(III) complex [Cp(2)TiOC(6)H(4)PH((t)Bu)(2)][B(C(6)F(5))(4)] 5. The titanium(III)-phosphorus FLP [Cp(2)TiOC(6)H(4)P((t)Bu)(2)] 6 has been synthesised either by chemical reduction of [Cp(2)Ti(Cl)OC(6)H(4)P((t)Bu)(2)] 1 with [CoCp*(2)] or by reaction of [Cp(2)Ti{N(SiMe(3))(2)}] with 2-C(6)H(4)(OH){P((t)Bu)(2)}. Both 2 and 6 catalyse the dehydrogenation of Me(2)HN·BH(3).     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.     

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu)

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.     

Synthesis and reactivity of a uranyl-imidazolyl complex

Treatment of [UO(2)(Ar(2)nacnac)Cl](2) with 4 equiv. of Li(C(4)H(5)N(2)) results in the formation of a rare uranyl organometallic complex [Li(MeIm)][UO(μ-O)(Ar(2)nacnac)(μ-C,N-C(4)H(5)N(2))(2)] (2), in moderate yield. Reaction of 2 with 1 equiv. of MCl(2) (M = Fe, Co) yields the bimetallic complexes [MCl(MeIm)][UO(2)(Ar(2)nacnac)(μ-N,C-C(4)H(5)N(2))(2)] (M = Fe, 3; M = Co, 4).     

Investigations of the TeCl(4)-(t)BuNHLi Reaction: Synthesis, X-ray Structures, and Fluxional Behavior of the Tellurium-Nitrogen Compounds [Li(2)Te(N(t)Bu)(3)](2), {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2), and {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2)

The reaction of (t)BuNHLi with TeCl(4) in toluene at -78 degrees C produces (t)BuNTe(&mgr;-N(t)Bu)(2)TeN(t)Bu (1) (55%) or [((t)BuNH)Te(&mgr;-N(t)Bu)(2)TeN(t)Bu]Cl (2) (65%) for 4:1 or 7:2 molar ratios, respectively. The complex {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2) (5) is obtained as a minor product (23%) from the 4:1 reaction. It is a centrosymmetric dimer in which each half consists of the tellurium diimide dimer 1 bonded through an exocyclic nitrogen atom to a molecule of LiTe(N(t)Bu)(2)(NH(t)Bu) which, in turn, is linked to a LiCl molecule. Crystals of 5 are monoclinic, of space group C2/c, with a = 27.680(6) ?, b = 23.662(3) ?, c = 12.989(2) ?, beta = 96.32(2) degrees, V = 8455(2) ?(3), and Z = 4. The final R and R(w) values were 0.046 and 0.047. At 65 degrees C in toluene solution, 5 dissociates into 1, LiCl, and {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2) (4), which may also be prepared by treatment of [Li(2)Te(N(t)Bu)(3)](2) (6) with 2 equiv of HCl gas. The centrosymmetric structure of 6 consists of a distorted hexagonal prism involving two pyramidal Te(N(t)Bu)(3)(2)(-) anions linked by four Li atoms to give a Te(2)N(6)Li(4) cluster. Crystals of 6 are monoclinic, of space group P2(1)/c, with a = 10.194(2) ?, b = 17.135(3) ?, c = 10.482(2) ?, beta = 109.21(1) degrees, V = 1729.0(5) ?(3), and Z = 2. The final R and R(w) values were 0.026 and 0.023. VT (1)H and (7)Li NMR studies reveal that, unlike 1, compounds 2, 4, and 6 are fluxional molecules. Possible mechanisms for these fluxional processes are discussed.     

Reactions of Li- and Yb-coordinated N,N'-bis(trimethylsilyl)-beta-diketiminates: one- and two-electron reductions, deprotonation, and C-N bond cleavage

The synthesis and characterisation of novel Li and Yb complexes is reported, in which the monoanionic beta-diketiminato ligand has been (i) reduced (SET or 2 [times] SET), (ii) deprotonated, or (iii) C-N bond-cleaved. Reduction of the lithium beta-diketiminate Li(L(R,R'))[L(R,R')= N(SiMe(3))C(R)CHC(R')N(SiMe(3))] with Li metal gave the dilithium derivative [Li(tmen)(mu-L(R,R'))Li(OEt(2))](R = R'= Ph; or, R = Ph, R[prime or minute]= Bu(t)). When excess of Li was used the dimeric trilithium [small beta]-diketiminate [Li(3)(L(R,R[prime or minute]))(tmen)](2)(, R = R'= C(6)H(4)Bu(t)-4 = Ar) was obtained. Similar reduction of [Yb(L(R,R'))(2)Cl] gave [Yb[(mu-L(R,R'))Li(thf)](2)](, R = R[prime or minute]= Ph; or, R = R'= C(6)H(4)Ph-4 = Dph). Use of the Yb-naphthalene complex instead of Li in the reaction with [Yb(L(Ph,Ph))(2)] led to the polynuclear Yb clusters [Yb(3)(L(Ph,Ph))(3)(thf)], [Yb(3)(L(Ph,Ph))(2)(dme)(2)], or [Yb(5)(L(Ph,Ph))(L(1))(L(2))(L(3))(thf)(4)] [L(1)= N(SiMe(3))C(Ph)CHC(Ph)N(SiMe(2)CH(2)), L(2)= NC(Ph)CHC(Ph)H, L(3)= N(SiMe(2)CH(2))] depending on the reaction conditions and stoichiometry. The structures of the crystalline complexes 4, 6x21/2(hexane), 5(C(6)D(6)), and have been determined by X-ray crystallography (and have been published).     

Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.