The effects of magnesium and aluminium ions’ additions on the kinetics of titanium dioxide structural transformation

Catalytic fast pyrolysis analysis of miscanthus over HZSM-5, La/ZSM-5, and Ca/ZSM-5 was performed using pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS). The characteristics of the catalysts used in this study were analyzed using XRD, SEM, Pyridine IR, ICP, and N₂ adsorption. The catalytic performance of the three catalysts was evaluated in terms of deoxygenation. Py–GC/MS results show that with increasing temperature, pyrolysis vapor yield first increased and then decreased. This may be due to secondary cracking at higher temperatures, which produced more gas products. Moreover, hydrocarbon content increased with rising temperature. The optimum temperature was found to be 600 °C, which resulted in the greatest liquid yield. All three catalysts increased pyrolysis vapor yield by about 30 %. Moreover, the hydrocarbon content of miscanthus increased from 6 to 39 %, 46, and 44 %, respectively, when HZSM-5, La/ZSM-5, and Ca/ZSM-5 were applied. In conclusion, the three catalysts were effective for deoxygenation of pyrolysis vapor yield. Considering both economic and catalytic upgrading effect, Ca/ZSM-5 may be the best catalyst.     

Influence de l'aluminium sur la tenue à l'oxydation du titane entre 550 et 750 °C

The oxidation behaviour of TiAl binary alloys (1.65 wt.% Al and 10 wt.% Al) was studied between 550 and 750 °C in pure oxygen for times up to 500 h. From thermogravimetric studies it appears that these alloys have a better oxidation resistance than that of pure titanium. The morphological observations showed a marked influence of aluminium on the oxide scale structure and crystallization. However, the X-ray diffraction experiments revealed only the presence of rutile and α alumina, the latter being essentially localized close to the outer interface. The influence of aluminium on the oxidation behaviour of these alloys is discussed in comparison with published data and the observations made for pure titanium.     

Influence of the synthesis conditions on the structure and composition of the titanium–magnesium nanocatalyst and on its activity in isoprene polymerization

Synthesis of titanium–magnesium nanocatalyst in a high-pressure reactor under the conditions modeling the industrial conditions was studied. A laboratory scale plant including the units for the product synthesis, washing, and filtration was developed. The effect of elevated pressure (10–90 atm) on the process course, on the properties of the catalyst formed, and on the isoprene polymerization was studied for the first time. An increase in pressure leads to an increase in titanium incorporation into the catalyst from 1.52 to 2–2.3 wt % and simultaneously to an increase in the trivalent titanium content to 81 wt %. The titanium–magnesium nanocatalyst with such properties exhibits enhanced performance in isoprene polymerization without deteriorating the polymer microstructure. The development of the catalyst synthesis procedure on the laboratory scale plant will allow pilot-scale modeling of this process in the future.     

The phase diagram of the system ZrO2CaOMgO between 1200°C and 1700°C

Solid state phase relations in the system ZrO₂CaOMgO were investigated at 1700°, 1600°, 1500°, 1400°, 1300° and 1200°C. The most significant equilibrium isotherms are reported and the phase diagram of the system in the 1700° to 1200°C temperature range is proposed.     

Influence of hydroperoxides on the enantioselectivity of metal-catalyzed asymmetric Baeyer–Villiger oxidation and epoxidation with chiral ligands

Chiral hydroperoxides have a significant influence on the enantioselectivity of the metal-catalyzed asymmetric Baeyer–Villiger oxidation of cyclic ketones and the epoxidation of allylic alcohols, when chiral ligands are employed. If both the ligand and the hydroperoxide are enantiopure, the ligand determines the formation of the preferred product enantiomer in both reactions.     

Measurement of the hall mobility of injected electrons in liquid tetramethylsilane between 22 and 164 °C

We have measured the Hall mobility of excess electrons in liquid tetramethylsilane (TMS) between room temperature and 164°C. The novel result is that, within an experimental error of ≈10%, the Hall mobility μ_h is equal to the drift mobility μ_d; μ_h = 101 ± 7 cm²/V s at 22°C and 53 ± 5 cm²/Vs at 164°C. This indicates that, contrary to what is observed in neopentane, traps are unimportant and, in particular, are not responsible for the mobility drop observed close to the critical point in TMS.     

Influence of organic corrosion inhibitors on the corrosion performance of organic–inorganic hybrid coatings applied on aluminium alloy

The proposed work aims to develop and study sol–gel derived anticorrosion films for aluminium. To further improve performance of these films, organic corrosion inhibitors were incorporated into the films. The organic–inorganic hybrid films with and without corrosion inhibitors were deposited on an aluminium substrate by dip coating. The films were characterized by electrochemical impedance spectroscopy (EIS), DC polarisation techniques, and neutral salt spray test to evaluate their anticorrosion properties. This study shows that very low and very high MBT concentrations deteriorate the corrosion performance of coatings, and consequently, there is an optimum concentration of MBT. EIS results revealed a higher corrosion inhibitive activity of 2-mercaptobenzothiazole (MBT) compared to that of 2-amino-5-methylthiazole and 1,2,3 benzotriazole.     

Pressure and isotope effects on the proton jump of the hydroxide ion at 25°C

The limiting molar conductances Λ⁰ of potassium deuteroxide KOD in D₂O and potassium hydroxide KOH in H₂O were determined at 25°C as a function of pressure to disclose the difference in the proton-jump mechanism between an OH^? (OD^?) and a H₃O⁺ (D₃O⁺) ion. The excess conductance of the OD^? ion in D₂O λ _E ^O (OD ^-), as estimated by the equation $$\lambda _E^O (OD^ - ) = \Lambda ^O (KOD/D_2 O) - \Lambda ^O (KCl/D_2 O)$$ increases a little with pressure as well as the excess conductance of the OH^? ion in H₂O $$\lambda _E^O (OH^ - ) = \Lambda ^O (KOH/H_2 O) - \Lambda ^O (KCl/H_2 O)$$ However, their rates of increase with pressure are much smaller than those of the excess deuteron and proton conductances, λ _E ^O (D ⁺) and λ _E ^O (H ⁺). With respect to the isotope effect on the excess conductance, λ _E ^O (OH ^-)/λ _E ^O (D ⁺) decreases with presure as in the case of λ _E ^O (H ⁺)/λ _E ^O (D ⁺), but the value of λ _E ^O (OH ^-)/λ _E ^O (OD ^-) itself is much larger than that of λ _E ^O (H ⁺)/λ _E ^O (D ⁺) at each pressure. These results are ascribed to the difference in the pre-rotation of water molecules, which is brought about by the difference in the intial orientation of the rotating water molecule adjacent to the OH^? (OD^?) or the H₃O⁺ (D₃O⁺) ion.     

Dependence of the volume characteristics and viscosity of solutions of methanol-octane-naphthalene on composition at 25°C

The limiting solubility of naphthalene in a mixture of methanol-octane at 25°C is determined via isothermal saturation. The kinematic viscosity of a mixture of methanol-octane-naphthalene is measured at 25°C. Data on the density of triple mixtures of methanol-octane-naphthalene, used to calculate the partial and apparent molar volumes of naphthalene, are obtained with a high degree of accuracy. The obtained results are discussed in terms of the interactions that occur in solution.     

Salt effects on the protonation of ortho-phosphate between 10 and 50°C in aqueous solution. A complex formation model

Protonation constants of o-phosphate were studied potentiometrically, using the (H⁺)-glass electrode in aqueous NaCl, KCl and tetraethylammonium iodide solutions, at 0IIM and 10T50°C. The differences found in the protonation constants for different salt solutions are explained by a complex formation model. The formation of the species MPO ₄ ^2– , MHPO ₄ ^– , MH₂PO ₄ ⁰ , M₂PO ₄ ^– and M₂HPO ₄ ⁰ (M=Na⁺, K⁺) is hypothesized. In mixed NaCl-KCl solutions, it is possible to find the mixed metal species NaKPO ₄ ^– and NaKHPO ₄ ⁰ . Ionic strength and temperature dependence parameters are reported for all species. The relevance of Na⁺ and K⁺ complexes is discussed in connection with speciation problems of natural fluids, such as marine water and urine.     

Influence of swallowing Aids on the adsorption and palatability of Kremezin®

The purpose of this study was to evaluate the effect of three swallowing aids on the adsorbent properties and palatability of a mixture of the oral charcoal adsorbent, Kremezin?. None of the swallowing aids had any effect on the adsorption of indole by Kremezin?, either in vitro and in vivo. In gustatory sensation tests of the palatability of the swallowing aids with Kremezin?, 14 items were evaluated according to the semantic differential (SD) method. Factor analysis of the results identified two main factors 'Remaining after removing from mouth' and 'Sense of holding in mouth' as predominantly determining the palatability. The swallowing aid with the highest viscosity allowed the best dispersion of Kremezin?, and also improved the palatability of Kremezin? the most.     

Further study on the synthesis of F-containing porphyrins and their catalytic activity on oxidation of cyclohexene

Reaction of tetrakis(p-allyloxyphenyl)porphyrin and perfluoroalkanesulfonyl bromides givestetrakis(p-polyfluoroalkoxylphenyl)substituted porphyrins.The yields are over 90%.The synthesis ofthe metal ion complexes of these F-containing porphyrins is also reported.Preliminary results on thestudy of the catalytic activity of the manganese(Ⅲ)complexes of various fluorinated porphyrins onoxidation of cyclohexene indicate that the introduction of R_F group into porphyrin contributes to thestability of the catalysts.     

Electrical conductivity of titanium pyrophosphate between 100 and 400 °C: effect of sintering temperature and phosphorus content

The synthesis of titanium pyrophosphate is carried out, and the material is sintered at different temperatures between 370 and 970 °C. Yttrium is added during the synthesis to act as acceptor dopant, but it is mainly present in the material in secondary phases. The conductivity is studied systematically as a function of sintering temperature, pH₂O, pO₂, and temperature (100–400 °C). Loss of phosphorus upon sintering above 580–600 °C is confirmed by energy dispersive spectroscopy and combined thermogravimetry and mass spectrometry. The conductivity decreases with increasing sintering temperature and decreasing phosphorus content. The highest conductivity is 5.3?×?10^?4 S cm^?1 at 140 °C in wet air (pH₂O?=?0.22 atm) after sintering at 370 °C. The conductivity is higher in wet atmospheres than in dry atmospheres. The proton conduction mechanism is discussed, and the conductivity is attributed to an amorphous secondary phase at the grain boundaries, associated with the presence of excess phosphorus in the samples. A contribution to the conductivity by point defects in the bulk may explain the conductivity trend in dry air and the difference in conductivity between oxidizing and reducing atmospheres at 300–390 °C. Slow loss of phosphorus by evaporation over time and changes in the distribution of the amorphous phase during testing are suggested as causes of conductivity degradation above 220 °C.     

Influence of Cyclodextrin on the Styrene Polymerization

Cyclodextrin (CD) are oligosaccharides consisting of 6(α), 7(β), 8(γ) units of 1,4-linked glucose. Due to their polar hydrophilic outer shell and relatively hydrophobic cavity, they are able to build up host-guest complexes by inclusion of suitable hydrophobic molecules. The formation of these complexes leads to significant changes of the solubility and reactivity of the guest molecules, but without any chemical modification. Thus, water insoluble molecules may become completely water solu…     

HPLC–MS determination of the oxidation products of the reaction between α- and β-pinene and OH radicals

Biogenic non-methane hydrocarbons such as isoprene, alpha-pinene, and beta-pinene, are emitted by forests in very large quantities. To evaluate the role of alpha- and beta-pinene and their contribution to the global production of trace gases and especially aerosol precursors, a study of the oxidation mechanism of alpha- and beta-pinene with hydroxyl radicals must be conducted.The degradation products of both monoterpenes with hydroxyl radicals were identified and quantified in a fast-flow reactor. The products were collected on a liquid-nitrogen trap coated with a 2,4-DNPH solution to which two internal standards (benzaldehyde-2,4-DNPH and tolualdehyde-2,4-DNPH) had been added. The collection method was based on the in situ conversion of aldehyde and/or ketone compounds to their 2,4-dinitrophenylhydrazone derivatives. The derivatives were analyzed by HPLC-MS using APCI(-). TIC chromatograms and mass spectral data for the various oxidation products are presented.For alpha-pinene, pinonaldehyde is the most important degradation product, with smaller amounts of acetone, formaldehyde, campholenealdehyde, and acetaldehyde. For beta-pinene, nopinone and formaldehyde are the most abundant products, of almost equal importance, whereas acetone and acetaldehyde are minor compounds.     

Statistical quantification of the influence of material properties on the oxidation and ignition of activated carbons

The influence of material properties on the reactivities of activated carbon materials have been studied on a laboratory scale. Carbon samples having diversified origin and properties were characterized using a thermogravimetry (TG) coupled with a differential scanning calorimetry (DSC). Reactivity parameters like the Point of Initial Oxidation (PIO) representing the beginning of the oxidation reactions and the Spontaneous Ignition Temperature (SIT) where the bed combustion takes place in a self sustaining manner were experimentally determined. The intrinsic properties of the activated carbons influencing oxidation and ignition were examined qualitatively followed by quantitative statistical correlations. Results from both qualitative and statistical correlations showed that increase in the oxygen content in the form of surface oxygenated groups increased the reactivity of activated carbons. It was by far the single most influential property discriminated from the analysis. The porosity characteristics like the specific surface area and pore volume did show some vague trends but could not be validated like that of the oxygen content. The effects of these individual properties on the oxidation and ignition reactivity are discussed.     

Influence of valence and concentration of electrolytes on the ζ-potential of polyacrylic lattices

The -potential of copolymer particles of acrylic amide, acrylic acid, acrylic butyl ester, and styrene were measured in different electrolyte solutions. In an isotonic solution of sodium chloride, they vary with the content of acrylic acid between –36 mV and –49 mV. In the presence of 21-electrolytes, the -potential could be correlated with the logarithm of the electrolyte concentration. The 21-electrolytes predominantly determine the -potential of the particles not only in the solutions of these electrolytes, but also in mixed electrolyte solutions. In the presence of human serum, the electrophoretic mobility increases with increasing acrylic acid content of the polymer.     

Influence of β-cyclodextrin on the protolytic and complexing ability of p-aminobenzoic acid

UV spectroscopy was used to study the protolytic properties and determine the ionization constants of p-aminobenzoic acid in the presence of β-cyclodextrin. Formation of supramolecular structures of 1: 1 composition was established. Stability constants of the β-cyclodextrin-p-aminobenzoic acid inclusion complex were calculated, as were the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) of its formation. The complexing process between β-cyclodextrin and p-aminobenzoic acid was found to occur spontaneously in the temperature range under investigation while being accompanied by energy liberation and leading to a reduction in the system’s entropy.