4-氨基-1-丁醇的合成研究

使用四丁基溴化铵为相转移催化剂,以4-氯-1-丁醇作为起始原料,与邻苯二甲酰亚胺钾盐反应制备N-(4-羟基丁基)邻苯二甲酰亚胺(中间产物),中间产物在氢氧化钠的作用下水解得到4-氨基-1-丁醇。通过高分辨质谱、核磁共振谱等对中间产物和产品进行了测定和结构表征。考察了反应溶剂、4-氯-1-丁醇与邻苯二甲酰亚胺钾盐摩尔比、反应温度、反应时间、四丁基溴化铵与邻苯二甲酰亚胺钾盐摩尔比对中间产物收率的影响,优化反应条件之后4-氨基-1-丁醇最佳的总收率为77. 2%。此工艺路线具有合成方法简便、反应条件温和、产品收率高等优点,可以进行工业放大。     

TiO2膜电极光电催化降解苯甲酸的机理研究

利用自制纳米TiO2薄膜作电极, 对苯甲酸光电催化降解过程进行了系统研究. 同时利用扫描电镜(SEM)、X射线衍射图谱(XRD)和光电流-电压响应谱分析光催化剂的微观性质和光电性能. 选取较高的pH 10.5, 以利于苯甲酸降解中间产物的检测(GC/MS). 通过对比光电催化与单一的TiO2光催化体系中苯甲酸的降解动力学、总有机碳(TOC)的去除率、降解产物的生成(GC/MS)及活性自由基物种的产生(ESR), 提出光电催化降解苯甲酸的具体反应路径和氧化机理. 羟基化的苯甲酸在羟基自由基与活性氧自由基的共同作用下, 经由含六个碳原子的二酸(顺式己二烯二酸), 被进一步氧化成小分子酸和CO2.     

TiO2膜电极光电催化降解苯甲酸的机理研究

利用自制纳米TiO2薄膜作电极, 对苯甲酸光电催化降解过程进行了系统研究. 同时利用扫描电镜(SEM)、X射线衍射图谱(XRD)和光电流-电压响应谱分析光催化剂的微观性质和光电性能. 选取较高的pH 10.5, 以利于苯甲酸降解中间产物的检测(GC/MS). 通过对比光电催化与单一的TiO2光催化体系中苯甲酸的降解动力学、总有机碳(TOC)的去除率、降解产物的生成(GC/MS)及活性自由基物种的产生(ESR), 提出光电催化降解苯甲酸的具体反应路径和氧化机理. 羟基化的苯甲酸在羟基自由基与活性氧自由基的共同作用下, 经由含六个碳原子的二酸(顺式己二烯二酸), 被进一步氧化成小分子酸和CO2.     

一锅法合成2-(2-氨基苯甲酰胺基)苯甲酸类化合物

报道了一种一锅法高效合成2-(2-氨基苯甲酰胺基)苯甲酸类化合物的新方法.以取代2-氨基苯甲酸为原料,合成了20个2-(2-氨基苯甲酰胺基)苯甲酸类化合物,其中有9个新化合物,收率达84%～99%.该方法操作简单,反应条件温和,对环境友好,产率高,并且底物普适性好.探讨了电子效应和空间位阻因素对反应的影响,为2-(2-氨基苯甲酰胺基)苯甲酸类化合物的合成提供了一种新途径.并且,2-(2-氨基苯甲酰胺基)苯甲酸(3a)经一步反应可高效生成大环内酯4和喹唑啉酮5.     

窄能隙共轭聚合物:聚[(3-烷基)噻吩-2,5]-取代苯甲烯衍生物的合成与表征

合成了3-丁基噻吩和3-辛基噻吩,并分别与对硝基苯甲醛和对二甲氨基苯甲醛进行聚合反应得到了具有极低能隙的聚(3-丁基噻吩)对硝基苯甲烯(PBTNBQ)、聚(3-丁基噻吩)对二甲氨基苯甲烯(PBTDMABQ)和聚(3-辛基噻吩)对二甲氨基苯甲烯(POTDMABQ).采用红外光谱、核磁共振氢谱和紫外-可见吸收光谱确认了产物的结构,发现中间产物聚(3-烷基)噻吩取代苯甲烷衍生物中存在部分醌化产物.根据E_g与入射光子能量hν的关系,采用2种模型计算了3种聚合物薄膜的光学禁带宽度为PBTNBQ1.63,1.84eV;PBTDMABQ1.44,1.75eV和POTDMABQ1.32,1.69eV,属窄能隙共轭聚合物.     

水介质中9,10-二芳基吖啶的洁净合成

水介质中在十二烷基磺酸钠(SDS)催化下, 席夫碱与双甲酮反应合成了一系列9,10-二芳基吖啶衍生物, 同时分离得到一种中间产物. 所有产物的结构通过红外光谱和1H NMR光谱确定, 产物10-(4-氯苯基)-9-(4-甲氧基苯基)-3,3,6,6-四甲基-3,4,6,7,9,10-六氢化吖啶-1,8(2H,5H)-二酮(3i)和中间产物2-{4-氯苯基-[2-(4-甲氧基苯基氨基)-4,4-二甲基-6-氧代环已-1-烯基]甲基}-3-羟基-5,5-二甲基环已-2-烯酮(4h)的结构还通过单晶X射线衍射分析确证.     

N-[3-(4-甲基苯基)-3-氧代-1-芳基丙基]乙酰胺的三氟乙酸催化合成

以对甲基苯乙酮、芳香醛和乙腈为主要原料,通过三氟乙酸催化的改进的Dakin-West反应,顺利得到28个N-[3-(4-甲基苯基)-3-氧代-1-芳基丙基]乙酰胺,最高收率可达95%.18个新化合物的结构经1H NMR,13C NMR和HRMS证实.结构测试发现,羟基苯甲醛参与Dakin-West反应后得到的全部是羟基乙酰化的产物.作者首次证实,羟基苯甲醛参与的Dakin-West反应不是串联反应,而是羟基苯甲醛首先经TFA催化转化为乙酰氧基苯甲醛,然后参与Dakin-West反应,最终生成羟基乙酰化产物.通过碱性水解,可以选择性高收率地制备对应的羟基化β-乙酰氨基酮,同时也反证了羟基乙酰化产物的存在.该研究扩展了TFA催化的Dakin-West反应,为β-乙酰氨基酮的合成提供了新的方法.     

TiO2光催化降解4-氯苯酚过程中的电分析监测

采用循环伏安法和紫外光谱法对有机物的光催化降解进行机理研究和在线监测.以标准光催化剂DegussaP25在紫外光照射下催化降解4-氯苯酚,发现在降解过程中至少有两对氧化还原中间产物对苯二酚-苯醌和羟基氢醌-羟基苯醌.由4-氯苯酚及中间产物的电极响应,可以观测到它们在光催化降解过程中的含量变化,从而对整个过程实现在线监测,并由此全面了解光催化反应机理.从不同反应时间后测得的紫外光谱可以看到,苯环特征峰逐渐消失.这表明4-氯苯酚的苯环逐渐被打开,直至被彻底降解.     

SERS-HPLC联用技术对邻氨基苯硫酚与邻碘苯甲酰氯反应的监测

通过表面增强拉曼光谱(SERS)与高效液相色谱(HPLC)联用开展了在线监测催化剂对邻氨基苯硫酚(OATP)与邻碘苯甲酰氯反应的影响. 结果表明, 无催化剂时反应产物为1b{S-[2-(2碘苯甲酰氨基)苯基]-2-碘代苯硫酸盐}和2b{N,N′-[二硫(2, 1-亚苯基)]二(2-碘苯甲酰胺)}, 在醋酸铜催化下生成3b{10-(2-碘苯甲酰基)二苯并[b, f ][1, 4]硫氮杂-11(10H)-酮}; 无催化剂条件下经历亲核取代反应及硫自由基耦合的过程, 在醋酸铜催化下产物 1b 的结构发生变异生成3b. 所得结果与核磁质谱等常规非现场技术解析结构一致.     

N-羟基邻苯二甲酰亚胺/Co(acac)_2催化的α-紫罗兰酮的氧化反应

以分子氧(O_2)为氧化剂,在无溶剂条件下,研究了N-羟基邻苯二甲酰亚胺/乙酰丙酮亚钴(Ⅱ)体系对α-紫罗兰酮的催化氧化反应,分析了氧化产物,主要得到α-紫罗兰酮的烯丙位氧化产物5-氧代-α-紫罗兰酮,同时生成少量环氧α-紫罗兰酮及重排产物4-氧代-β-紫罗兰酮和环氧β-紫罗兰酮,提出了可能的反应机理,化合物的结构经IR、~1H NMR、MS和EA等测试技术得以表征;为了提高5-氧代-α-紫罗兰酮的选择性和催化氧化反应的转化率,优化了催化氧化反应的工艺条件:当反应温度为70 ℃,氧气压力为1.0 Mpa,N-羟基邻苯二甲酰亚胺和乙酰丙酮亚钴(Ⅱ)用量分别为α-紫罗兰酮的25%和1.0%,反应10 h,5-氧代-α-紫罗兰酮的产率达53.4%,反应转化率达95.0%以上,平行实验表明,实验重复性良好.     

Synthesis of benzofurazan derivatization reagents for carboxylic acids in liquid chromatography/electrospray ionization-tandem mass spectrometry

The applicability of benzofurazan derivatization regents to carboxylic acids analysis in LC/ESI-MS/MS (high-performance liquid chromatography/electrospray ionization tandem mass spectrometry) was examined. The product ion spectra of DAABD-AE {4-[2-(N,N-dimethylamino)ethylaminosulfonyl]-7-(2-aminoethylamino)-2,1,3-benzoxadiazole}, DAABD-PZ {4-[2-(N,N-dimethylamino)ethylaminosulfonyl]-7-N-piperazino-2,1,3-benzoxadiazole}, DAABD-PiCZ {4-[4-carbazoylpiperidin-1-yl]-7-[2-(N,N-dimethylamino)ethylaminosulfonyl]-2,1,3-benzoxadiazole}, DAABD-ProCZ {4-[2-carbazoylpyrrolidin-1-yl]-7-[2-(N,N-dimethylamino) ethylaminosulfonyl]-2,1,3-benzoxadiazole} and DAABD-Apy {4-[2-(N,N-dimethylamino)ethylaminosulfonyl]-7-(3-aminopyrrolidin-1-yl)-2,1,3-benzoxadiazole}, and their acetylated compounds were obtained. An intense fragment ion at m/z 151 corresponding to (dimethylamino)ethylaminosulfonyl moiety was observed in each spectra, suggesting that these reagents were suitable for ESI-MS/MS analysis. DAABD-AE, DAABD-APy and DAABD-PZ were applied to the analysis of octanoic acid and it was found that DAABD-AE and DAABD-APy gave high signal intensity suitable for LC/ESI-MS/MS.     

Influence of polarity of solvents on the spectral properties of bichromophoric coumarins

Absorption and fluorescence spectra of bichromophoric coumarins were investigated in different solvents and in polymer matrices. These bichromophoric coumarins were composed of a coumarin dimethylamino-substituted at position 7 or unsubstituted coumarin and phthalimide or a 1,8-naphthylimide linked with an iminomethyl bridge to the position 3 or 8 of the coumarin ring. Absorption spectra of 7-dimethylamino derivatives in position 3 of coumarin were quite similar, exhibiting broad bands around 430-440 nm like the parent compound 7-dimethylaminocoumarin-3-carbaldehyde. For coumarin derivatives substituted in position 8, the absorption maximum was shifted to shorter wavelength as for derivatives without position 7 dimethylamino substitution. The most intense fluorescence was observed for 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin in polar solvent, while intense fluorescence was observed for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxobenz[de]isoquinolinyl)iminomethyl]-coumarin in non polar solvent (chloroform), comparable with the fluorescence of 7-amino-4-methylcoumarin. Spectral measurements of bichromophoric coumarins in polymer matrices revealed that the maxima lies in between those for chloroform and methanol yielding more intense fluorescence then in solutions. Completely different solvent effects were observed for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxobenz[de]isoquinolinyl)imino-methyl]coumarin and 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin. With addition of polar methanol the intensity of fluorescence decreases, yielding a Stern-Volmer-like constant of 0.54 dm3 mol?1 for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxo-benz[de]isoquinolinyl)iminomethyl]coumarin and an even higher one of 1.08 dm3·mol?1 for 7-dimethylaminocoumarin-3-carbaldehyde compared to the rather low one of 0.024 dm3 mol?1 for 7-amino-4-methylcoumarin. Contrary to this, addition of methanol under identical conditions brings about an increase in fluorescence intensity of 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin (about 60-fold). The reasons for these different solvent effects are discussed.     

Microwave-assisted rapid photocatalytic degradation of malachite green in TiO2 suspensions: mechanism and pathways

Microwave-assisted photocatalytic (MPC) degradation of malachite green (MG) in aqueous TiO2 suspensions was investigated. A 20 mg/L sample of MG was rapidly and completely decomposed in 3 min with the corresponding TOC removal efficiency of about 85%. To gain insight into the degradation mechanism, both GC-MS and LC-ESI-MS/MS techniques were employed to identify the major intermediates of MG degradation, including N-demethylation intermediates [(p-dimethylaminophenyl)(p-methylaminophenyl)phenylmethylium (DM-PM), (p-methylaminophenyl)(p-methylaminophenyl)phenylmethylium (MM-PM), (p-methylaminophenyl)(p-aminophenyl)phenylmethylium (M-PM)]; a decomposition compound of the conjugated structure (4-dimethylaminobenzophenone (DLBP)); products resulting from the adduct reaction of hydroxyl radical; products of benzene removal; and other open-ring intermediates such as phenol, terephthalic acid, adipic acid, benzoic acid, etc. The possible degradation mechanism of MG included five processes: the N-demethylation process, adduct products of the hydroxyl radical, the breakdown of chromophores such as destruction of the conjugated structure intermediate, removal of benzene, and an open-ring reaction. To the best of our knowledge, it is the first time the whole MG photodegradation processes have been reported.     

Time-dependent density functional theory (TDDFT) study of the excited charge-transfer state formation of a series of aromatic donor-acceptor systems

Singlet excitation energy calculations for a series of acceptor para-substituted N,N-dimethyl-anilines that are dual (4-(N,N-dimethylamino)benzonitrile, 4DMAB-CN, 4-(N,N-dimethylamino)benzaldhyde, 4DMAB-CHO, 1-methyl-7-cyano-2,3,4,5-tetrahydro-1H-1-benzazepine, NMC7) and nondual (4-aminobenzonitrile, 4AB-CN, 3-(N,N-dimethylamino)benzonitrile, 3DMAB-CN, and 4-nitro(N,N-dimethyl) aniline, 4DMAB-NO(2)) fluorescent have been performed using time-dependent density functional theory (TDDFT). The B3LYP and MPW1PW91 functionals with a 6-311+G(2d,p) (Bg) basis set have been used to compute excitation energies. Ground-state geometries were optimized using density functional theory (DFT) with both B3LYP and MPW1PW91 functionals combined with a 6-31G(d) basis set. For most of the molecules presented in this study, potential energy surfaces have been computed according to the coordinates related to the three following mechanisms proposed in the literature: twisting, wagging, and planar intramolecular charge transfer (ICT). Comparison of the three models for the different molecules leads to the conclusion that only the twisting ICT model is able to explain the low frequency, strongly solvent-dependent energy band present in the fluorescence spectra. According to this model, the 4AB-CN molecule is calculated to be nondual fluorescent in agreement with the experimental spectra. The single band observed in the fluorescence spectra of TMAB-CN (4-(N,N-dimethylamino)-3,5-(dimethyl)benzonitrile) is due to a large stabilization of the charge-transfer excited state along the twisting coordinate. The nondual fluorescence of the 4DMAB-NO(2) molecule is explained by the same mechanism. In the case of 3DMAB-CN, the single observed emission, which is solvent-dependent, has been assigned to the lowest charge-transfer excited state. The dual fluorescence of 4DMAB-CN and 4DMAB-CHO is explained within the twisting ICT model by a double mechanism (already proposed by Serrano et al.: Serrano-Andrés, L.; Merchán, M.; Roos, B. J.; Lindh, R. J. Am. Chem. Soc. 1995, 117, 3189) that involves the presence of two low-lying states close enough in energy. The observation of dual fluorescence in NMC7, that has been one of the origins of the planar ICT model put forward by Zachariasse et al. (Zachariasse, K.; van der Haar, T.; Hebecker, A.; Leinhos, U.; Kühnle, W. Pure Appl. Chem. 1993, 65, 1745), could be fully understood by a double mechanism within the twisting ICT model. Within the set of investigated molecules, our calculations confirm that the twisting ICT model is the only mechanism acceptable to explain the dual and nondual fluorescence phenomenon. Our calculations are in complete agreement with experimental data.     

苯骈三氮唑的胺烷基化: 二级胺的合成

在干苯溶液中, 用4-N, N-二甲胺基苯甲醛, 苯骈三氮唑和芳胺或杂环芳胺回流,生成N-取代-1-苯骈三氮唑基-P-1N,N-二甲胺基)苄胺, 然后利用NaBH~4还原, 结果得到N-取代-4-N,N-二甲胺基苄胺, 反应条件温和、产率高、后处理方便, 一般只需一次重结晶, 即可得到纯产物。因此, 是合成二级胺的较好方法。     

New steroidal alkaloids from Sarcococca saligna

Two new steroidal alkaloids, salonine-A [(20S)-20-(N,N-dimethylamino)-3beta-(tigloylamino)-5alpha-pregn-14-en-2beta,4beta-diol] (1), and salonine-B [(20S)-20-(N,N-dimethylamino)-3beta-methoxy-pregn-5,16-diene] (2), were isolated from the MeOH extract of Sarcococca saligna, along with a known base, alkaloid-C (3). Their structures were elucidated on the basis of spectroscopic methods. All three compounds were found to be cholinesterase inhibitors.     

SYNTHESIS OF γ-GLUTAMYLPHOSPHONODIDEPEPTIDES

Abstract

γ-Glutamylphosphonodidepsipeptides 3a-f were obtained by condensation of α-t-butyl or α-benzyl ester of optically active N-benzyloxycarbonyl-glutamic acid with di-p-nitrobenzyl 1-hydroxymethanephosphonate, (+) dibenzyl 1-hydroxy-2-methylpropanephosphonate and (-) dibenzyl 1-hydroxy-3 methylbutanephosphonate. Dicyclohexylcarbodiimide in the presence of 4-(N,N-dimethylamino)- pyridine and 1-hydroxybenzotriazole in methylene chloride was used as a condensing agent for compounds 3a-c. Compounds 3d-f were obtained by means of the dicyclohexylcarbodiimide method in the presence of 4-(N, N-dimethylamino)pyridine in carbon tetrachloride. Protecting groups were removed by conventional methods.     

Photodegradation of methyl green using visible irradiation in ZnO suspensions: determination of the reaction pathway and identification of intermediates by a high-performance liquid chromatography-photodiode array-electrospray ionization-mass spectrometry method

Heterogeneous photocatalytic treatment of a dye called methyl green (MG), which was simulating textile wastewater from associated auxiliary chemicals, was investigated using ZnO. A detailed investigation of the photodegradation of MG has been carried out in the ZnO suspension irradiated with visible light. The effects of various factors - viz. pH values, amount of catalyst, initial dye concentration, and the presence of NaCl, Na(2)CO(3), H(2)O(2), and Na(2)S(2)O(8) - on the degradation efficiency were studied. Thirty-two intermediates were separated, identified, and characterized by high-performance liquid chromatography-photodiode array-electrospray ionization-mass spectrometry (HPLC-ESI-DAD-MS) technology, giving us insight into the pathways of the degradation process.     

NARROW BANDWIDTH BRIGHT SCARLET ORGANIC ELECTROLUMINESCENT DEVICE BASED ON N,N'-BIS[4-(N,N-DIMETHYLAMONO)-BENZYLIDENE]-DIAMINOMALEONITRILE DYE

A novel red dye, N, N'-bis[4-(N,N-dimethylamino)-benzylidene]diaminomaleonitrile (BAM), was prepared by reacting diaminomaleonitrile with 4-(N,N-dimethylamino)-benzaldehyde and were characterized by ¹H NMR, UV absorption and photoluminescence. The BAM dye showed an absorption peak wavelength of 530 nm and bright photoluminescence with a peak wavelength at 675 nm. It was used as the doped emitter for fabricating a bright scarlet organic electroluminescent (EL) device. The structure of the double-layer EL device consisted of a hole-transport layer and a luminescent layer between ITO glass and magnesium electrodes. The hole-transport layer was a poly(N-vinylcarbazole) (PVK) film. The luminescent layer consisted of a host material, 8-hydroxyquinoline aluminum (Alq₃), and BAM dye as the dopant. A bright light with the peak of 620 nm and narrow bandwidth of 50 nm was obtained in the device with a maximum luminance of 6230 cd/m². The emission spectra almost unchanged as the luminance increased with increasing injection current and the bias voltage. A tentative explanation from both the electronic distribution viewpoint and the molecular geometric analysis for the narrow bandwidth of this red dye was offered.     

Synthesis, DNA binding and cleavage activities of copper (II) thiocyanate complex with 4-(N,N-dimethylamino)pyridine and N,N-dimethylformamide

Two novel copper(II) thiocyanate complexes with 4-(N,N-dimethylamino) pyridine and N,N-dimethylformamide (1) and with 4-(N,N-dimethylamino) pyridine (2) have been synthesized and characterized. The crystal and molecular structures of complexes 1 and 2 were determined by single-crystal X-ray diffraction. Antioxidative activity tests in vitro showed that complex 1 has significant antioxidative activity against hydroxyl free radicals from the Fenton reaction and also oxygen free radicals, which is better than standard antioxidants like vitamin C and mannitol. The interaction of complex 1 with calf thymus DNA was investigated by spectroscopic, cyclic voltammetry, and viscosity measurements. Results suggest that complex 1 can bind to DNA via partial intercalation mode. Moreover, complex 1 has been found to cleavage of plasmid DNA pBR322.