Exploration of ground and excited electronic states of aromatic and quinoid S,S-dioxide terthiophenes. Complementary systems for enhanced electronic organic materials

We analyze the electronic and molecular structures for the ground and excited electronic states of aromatic terthiophene (3T), the quinodimethane 3',4'-dibutyl-5,5' '-bis(dicyanomethylene)-5,5' '-dihydro-2,2':5',2' '-terthiophene (3Q), and isologues with the middle ring S-oxidized (3TO2, 3QO2). These represent extremes of electron rich and deficient ground states, often exhibiting complementary properties. Oxidizing the central sulfur atom affects the molecular structure, electron affinity, and photophysical properties of both pi systems. The consequences for 3T include de-aromatization of the central thiophene, red-shifting of the electronic absorption spectrum, and lowering of the reduction potential. The electron deficient quinoid 3QO2 shows an enhancement of electron affinity from reducing the electron-donor ability of sulfur, and a blue-shifting of its electronic absorption spectrum was seen. Fluorescence emission is quenched in the sulfonated terthiophene, and the contrary effect again would be expected upon sulfonation of a quinoid emitter. Raman vibrational spectroscopy, electrochemistry, and UV-vis and fluorescence spectroscopies are analyzed in conjunction with theoretical calculations.     

A pi-stacking terthiophene-based quinodimethane is an n-channel conductor in a thin film transistor

A terthiophene-based quinodimethane, 3',4'-dibutyl-5,5' '-bis(dicyanomethylene)-5,5' '-dihydro-2,2':5',2' '-terthiophene (1) was synthesized and crystallized. Compound 1 has a planar quinoid geometry that is stabilized by dicyanomethylene groups at each end of the molecule. In the crystal each molecule is part of a dimerized face-to-face pi-stack, with intermolecular spacings of 3.47 and 3.63 A, respectively. Cyclic voltammetry showed that 1 could be reversibly reduced and oxidized in methylene chloride solution. Thin film transistors (TFTs) were prepared by vacuum evaporation of 1 onto SiO2(300 nm)/Si substrates, followed by evaporation of Ag source and drain contacts. The doped Si substrate served as the gate electrode. X-ray diffraction and atomic force microscopy indicate the films are polycrystalline, with the long axes of the molecules approximately perpendicular to the substrate. The TFT measurements revealed n-channel conduction in films of 1, with room-temperature electron field effect mobilities as high as 0.005 cm2/Vs. The butyl side chains give 1 appreciable solubility in a range of common solvents, and preliminary TFT results on films cast from chlorobenzene show electron mobility as high as 0.002 cm2/Vs. These results indicate that pi-stacked quinoidal thiophene oligomers are a promising new class of soluble n-channel organic semiconductors.     

Spectroscopic and theoretical study of the molecular and electronic structures of a terthiophene-based quinodimethane.

The UV/Vis, infrared absorption, and Raman scattering spectra of 3',4'-dibutyl-5,5"-bis(dicyanomethylene)-5,5"-dihydro-2,2':5',2"-terthiophene have been analyzed with the aid of density functional theory calculations. The compound exhibits a quinoid structure in its ground electronic state and presents an intramolecular charge transfer from the terthiophene moiety to the C(CN)2 groups. The molecular system therefore consists of an electron-deficient terthiophene backbone end-capped with electron-rich C(CN)2 groups. The molecule is characterized by a strong absorption in the red, due to the HOMO-->LUMO pi-pi* electronic transition of the terthiophene backbone that shifts hypsochromically on passing from the solid state to solution and with the polarity of the solvent. The analysis of the vibrational spectra confirms the structural conclusions and supports the existence of an intramolecular charge transfer. Vibrational spectra in several solvents and as a function of temperature have also been studied. Significant frequency upshifts of the vibrations involved in the pi-electron-conjugated pathway have been noticed upon solution in polar solvents and with the lowering of the temperature. Finally, we propose a quinoid molecule as a reliable structural and electronic model for dication species in doped oligothiophenes or for bipolaron charged defects in doped polythiophene.     

Syntheses, and optical, fluorescence, and nonlinear optical characterization of phosphine-substituted terthiophenes

Earlier studies of phosphine-substituted terthiophenes have demonstrated that some of these materials exhibit nonlinear absorption at 532 nm. However, this wavelength is significantly removed from the linear absorption maxima of the complexes, suggesting that better nonlinear absorption might be observed at wavelengths closer to the linear absorption maxima. To investigate this possibility, a library of compounds has been prepared either by varying the group attached to the nonbonding pair of electrons on the phosphorus atoms of 5,5'-bis(diphenylphosphino)-2,2':5',2'-terthiophene (PT(3)P), or by introducing additional substituents on the 5'-position of 5-(diphenylphosphino)-2,2':5',2'-terthiophene (PT(3)). All these compounds have been characterized using multinuclear NMR, UV-vis, and fluorescence spectroscopy. The compounds are strongly fluorescent, and both the fluorescence wavelength and the intensity depend upon the thiophene substituents. The nonlinear optical properties have also been evaluated at various wavelengths in the blue region. Each compound exhibits reverse saturable absorption, and the intensity of the reverse saturable absorption at a particular wavelength depends on the chemical structure of the compound.     

Study of the isotropic and anisotropic fluorescence of two oligothiophenes by femtosecond time-resolved spectroscopy

The excited-state dynamics of two oligothiophenes, 5,5'-dicarboxyhaldehyde 2,2',5',2' '-terthiophene and 5-carboxyhaldehyde 2,2',5',2' '-terthiophene, were studied by time-resolved fluorescence spectroscopy, in the femtosecond regime. The isotropic and anisotropic parameters of their fluorescence were calculated. The angle (alpha) between the absorption and emission molecular dipoles was estimated from the initial fluorescence anisotropy. The effect of the chemical substituents, at the ends of the main chain of the molecule, on the temporal behavior of the fluorescence was investigated. Particularly, the nonsymmetric oligothiophene molecule (containing one aldehyde group) exhibits shorter excited-state isotropic decay time than the symmetric one (containing two aldehyde groups). This is due to the higher value of the emission dipole moment of the nonsymmetric oligothiophene in comparison with that of the symmetric one. Additionally, the two materials have almost the same anisotropic fluorescence parameters, and this is attributed to the same rotational motions in the excited state due to their similar molecular structures.     

Planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units

A series of planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units were synthesized. The optical data indicate a blue shift of the absorption maximum in comparison to the alpha-linked analogues due to cross-conjugation between fused rings. The crystal structures of 3,3'-bi(thieno[3,2-b]thiophene) and 3,3';6',3"-ter(thieno-[3,2-b]thiophene) reveal edge-to-face pi-stacked dimer motifs, whereas the crystal structure of 3,3'-bis(dithieno[3,2-b:2',3'-d]thiophene) consists of face-to-face pi-stacked molecules. [structure: see text]     

Reversible molecular switching of ruthenium bis(bipyridyl) groups bonded to oligothiophenes: effect on electrochemical and spectroscopic properties

We report the preparation of complexes in which ruthenium(II) bis(bipyridyl) groups are coordinated to oligothiophenes via a diphenylphosphine linker and a thienyl sulfur (P,S bonding) to give [Ru(bpy)(2)PT(3)-P,S](PF(6))(2) (bpy = 2,2'-bipyridyl, PT(3) = 3'-(diphenylphosphino)-2,2':5',2' '-terthiophene), [Ru(bpy)(2)PMeT(3)-P,S](PF(6))(2) (PMeT(3) = 3'-(diphenylphosphino)-5-methyl-2,2':5',2' '-terthiophene), [Ru(bpy)(2)PMe(2)T(3)-P,S](PF(6))(2) (PMe(2)T(3) = 5,5' '-dimethyl-3'-(diphenylphosphino)-2,2':5',2' '-terthiophene), and [Ru(bpy)(2)PDo(2)T(5)-P,S](PF(6))(2) (PDo(2)T(5) = 3,3' ' '-didodecyl-3' '-diphenylphosphino-2,2':5',2' ':5' ',2' ':5' ',2' ' '-pentathiophene). These complexes react with base, resulting in the complexes [Ru(bpy)(2)PT(3)-P,C]PF(6), [Ru(bpy)(2)PMeT(3)-P,C]PF(6), [Ru(bpy)(2)PMe(2)T(3)-P,C]PF(6), and [Ru(bpy)(2)PDo(2)T(5)-P,C]PF(6), where the thienyl carbon is bonded to ruthenium (P,C bonding). The P,C complexes revert back to the P,S bonding mode by reaction with acid; therefore, metal-thienyl bonding is reversibly switchable. The effect of interaction of the metal groups in the different bonding modes with the thienyl backbone is reflected by changes in alignment of the thienyl rings in the solid-state structures of the complexes, the redox potentials, and the pi --> pi transitions in solution. Methyl substituents attached to the terthiophene groups allow observation of the effect of these substituents on the conformational and electronic properties and aid in assignments of the electrochemical data. The PT(n)() ligands bound in P,S and P,C bonding modes also alter the electrochemical and spectroscopic properties of the ruthenium bis(bipyridyl) group. Both bonding modes result in quenching of the oligothiophene luminescence. Weak, short-lived Ru --> bipyridyl MLCT-based luminescence is observed for [Ru(bpy)(2)PDo(2)T(5)-P,S](PF(6))(2), [Ru(bpy)(2)PT(3)-P,C]PF(6), [Ru(bpy)(2)PMeT(3)-P,C]PF(6), and [Ru(bpy)(2)PMe(2)T(3)-P,C]PF(6), and no emission is observed for the alternate bonding mode of each complex.     

Easily processable phenylene-thiophene-based organic field-effect transistors and solution-fabricated nonvolatile transistor memory elements

The synthesis of a new series of mixed phenylene-thiophene oligomers is reported; 2,5-bis(4-n-hexylphenyl)thiophene (dH-PTP, 1), 5,5'-bis(4-n-hexylphenyl)-2,2'-bithiophene (dH-PTTP, 2), 5,5' '-bis(4-n-hexylphenyl)-2,2':5',2' '-terthiophene (dH-PT(3)P, 3), 5,5' "-bis(4-n-hexylphenyl)-2,2':5',2' ':5' ',2' "-quaterthiophene (dH-PT(4)P, 4), 1,4-bis[5-(4-n-hexylphenyl)-2-thienyl]benzene (dH-PTPTP, 5), and 2,5-bis[4(4'-n-hexylphenyl)phenyl]thiophene (dH-PPTPP, 6) were characterized by (1)H NMR, elemental analysis, UV-visible spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Vacuum-evaporated and solution-cast films were characterized by X-ray diffraction and scanning electron microscopy. All compounds display high p-type carrier mobilities as evaporated (up to 0.09 cm(2)/Vs) and as solution-cast (up to 0.03 cm(2)/Vs) films on both Si/SiO(2) and ITO/GR (glass resin) substrates. The straightforwardly synthesized dH-PTTP (2) displays an unprecedented combination of mobility, on/off ratio, stability, and processability. Both dH-PTTP (2) and dH-PPTPP (6) display a reversible, tunable, and stable memory effect even as solution-cast devices, with turn-on characteristics shifting from accumulation mode to zero or depletion mode after a writing voltage V(w) is applied. The charge storage is distributed over the gate dielectric structure and is concentrated near the dielectric-semiconductor interface, as evidenced by the response of "floating gate" configuration devices. Simple nonvolatile elements have been fabricated by solution-only techniques on ITO substrates using spin-coated glass resin, solution-cast oligomeric semiconductors, and painted graphite paste electrodes.     

Effect of molecular mass on supramolecular organisation of poly(4,4'-dioctyl-2,2':5',2'-terthiophene)

The effect of the chain length on the type and extent of the 2D supramolecular organization in poly(4,4'-dioctyl-2,2':5',2'-terthiophene) (PDOTT) monomolecular layers deposited on highly oriented pyrolytic graphite (HOPG) is studied by scanning tunneling microscopy (STM) and analyzed in terms of molecular modeling. The strictly monodispersed fractions of increasing molecular mass used in this study were obtained by chromatographic fractionation of the crude product of 4,4'-dioctyl-2,2':5',2'-terthiophene oxidative polymerization. STM investigations of PDOTT layers, deposited on HOPG from poly- and monodispersed fractions, show that polydispersity can be considered as a key factor seriously limiting supramolecular ordering. This is a consequence of significant differences in the type of supramolecular order observed for molecules of different chain length. It has been demonstrated that shorter molecules (consisting of 6 and 9 thiophene units) form well-defined two-dimensional islands, while the interactions between longer molecules (consisting of 12 and 15 thiophene units) become anisotropic. Consequently, for higher molecular mass fractions, the supramolecular organization is one-dimensional and consists of more or less separated rows of ordered macromolecules. In this case an increase of the chain length leads to amplification of the intermolecular interactions proceeding via interdigitation of the alkyl substituents of adjacent molecules. Polydispersed fractions show much less ordered organization because of the incompatibility of the supramolecular structures of molecules of different molecular masses. This finding is of crucial importance for the application of polythiophene derivatives in organic and molecular electronics since ordered supramolecular organization constitutes the condition sine qua non of good electrical transport properties.     

Spider-like oligothiophenes

Careful analysis and comparison of optical and electrochemical data available in recent literature for multi-thiophene molecular assemblies suggested a few basic rules for the design of structurally simple and easily accessible oligothiophenes endowed with properties not far from those exhibited by much more complex and synthetically demanding architectures. The synthesis and computational investigation of three examples of a class of oligothiophenes (spider-like) tailored according to these indications are reported together with their exhaustive optical and electrochemical characterization. The new compounds (T9 5, T14 6, T19 7) are characterized by a thiophene, a 2,2'-bithiophene and a 2,2',5',2'-terthiophene unit (the spider body) fully substituted with 5-(2,2'-bithiophen)yl pendants (the spider legs). Absorption and electrochemical data are in good agreement and point to a high pi-conjugation level, comparable to those displayed by much larger assemblies. Electrode potential cycling in proximity of the first oxidation peak affords fast and reproducible formation of conducting, highly stable [TXn]m films, mainly consisting of dimers (m=2). Electrooxidation kinetic experiments on deuterium-labelled T9 5, coupled to laser-desorption-ionization mass spectroscopy on the resulting dimer demonstrated that the coupling process is extremely regioselective in the alpha positions of the more conjugated pentathiophene chain. The optical and the electrochemical properties of the films are reported and discussed. A peculiar feature is their impressive charge-trapping ability. Spider-like oligothiophenes are promising materials for applications as active layers in multifunctional organic devices.     

Electropolymerization of Pd(II) complexes containing phosphinoterthiophene ligands

A series of Pd complexes of 3'-diphenylphosphino-2,2':5'2' '-terthiophene (1a, dppterth) in which the metal is coordinated in three different modes have been prepared and electropolymerized, resulting in the formation of conductive thin films. In [Pd2(mu-Cl2)(dppterth-P,C3)2] (3a) the metal is P,C-coordinated, in [PdCl2(dppterth-P)2] (4a) the coordination is monodentate via the phosphine, and in [Pd(dppterth-P,C3)(dppterth-P,S1)][PF6] (5a) both P,C- and P,S-coordination modes are found. In 5a, the coordinated thiophene is hemilabile and may be displaced by reaction with more strongly coordinating ligands such as isocyanides. To probe the effect of blocking the alpha-position of the terthienyl moiety with methyl groups, 3'-diphenylphosphino-5-methyl-2,2':5'2' '-terthiophene (1b, Me-dppterth) and 3'-diphenylphosphino-5,5' '-dimethyl-2,2':5'2' '-terthiophene (1c, Me2-dppterth) were prepared, and the corresponding series of Pd complexes was synthesized. One of these complexes, [Pd(Me2-dppterth-P,C3)(Me2-dppterth-P,S1)][PF6] (5c), has been crystallographically characterized. The electropolymerized films prepared from 5a react with isonitriles, and shifts in the absorption spectra of the electropolymerized materials are observed upon reaction. A Pd complex has also been prepared from 5-diphenylphosphino-2,2':5'2' '-terthiophene (2, 5dppterth), and this complex has been electropolymerized. All the electropolymerized thin films have been characterized using EDX analysis, which demonstrates good correspondence with the elemental analysis of the respective monomers, and the maximum conductivities of the films are near 10(-4) S x cm(-1). Comparing the electropolymerization behavior of the complexes, along with their electrochemical and spectroscopic data, allows conclusions to be drawn regarding the involvement of pi-delocalization and the metal group in the conductivity of the materials.     

Fluorocarbon-modified organic semiconductors: molecular architecture, electronic, and crystal structure tuning of arene- versus fluoroarene-thiophene oligomer thin-film properties

We present here the systematic synthesis and comparative physicochemical characterization of a series of regiochemically varied and core size extension-modulated arene(perfluoroarene)-thiophene oligomers. The molecules investigated are: 5,5'-diphenyl-2,2':5',2':5',2'-quaterthiophene (1), 5,5'-bis[1-[4-(thien-2-yl)phenyl]]-2,2'-dithiophene (2), 4,4'-bis[5-(2,2'-dithiophenyl)]-biphenyl (3), 5,5'-diperfluorophenyl-2,2':5',2':5',2'-quaterthiophene (4), 5,5'-bis[1-[4-(thien-2-yl)perfluorophenyl]]-2,2'-dithiophene (5), 4,4'-bis[5-(2,2'-dithiophenyl)]-perfluorobiphenyl (6), 5,5'-diperfluorophenyl-2,2':5',2'-tertthiophene (7), 5,5'-diperfluorophenyl-2,2'-dihiophene (8), and 5,5-diperfluorophenylthiophene (9). Trends in optical absorption and emission parameters, molecular structures as defined by single-crystal X-ray diffraction, as well as electrochemical redox processes are described. The morphologies and microstructures of the vapor-deposited films grown over a range of growth temperatures have also been characterized. Field-effect transistor (FET) measurements demonstrate that all of these materials are FET-active and, depending on the molecular architecture, exhibit comparably good p- or n-type mobility when optimum film microstructural order is achieved. A very large n-channel mobility of approximately 0.5 cm2/Vs with I(on)/I(off) ratios > 10(8) is achieved for films of 4.     

Intermolecular interactions in pi-stacked conjugated molecules. Synthesis,structure, and spectral characterization of alkyl bithiazole oligomers

Syntheses are reported of new 4,4'-dialkyl-2,2'-bithiazole oligomers that have alkenoxy side chains that are capable of easy conversion to oligomers with functionalized side chains, e.g., terminally substituted hydroxy chains. The crystal structures of two representative oligomers (4,4',4' ',4' "-tetra-(2-propenoxymethyl)-2,2',5',5' ',2' ',2' "-quaterthiazole (3P2) and 4,4',4' ',4' "-tetra-(3-hydroxypropyloxymethyl)-2,2',5',5' ',2' ',2' "-quaterthiazole (3H2)) were determined; 3P2 crystallizes in a pi-stacked motif with two molecules per unit cell, whereas 3H2 forms pi-stacks that are linked with hydrogen bonds to form infinite two-dimensional sheets with one molecule per unit cell. A comparison of the UV-vis spectra of the compounds in solution and in the solid state provides unequivocal evidence for the presence of a Davydov splitting, W(D) approximately 0.2 eV, in solid 3P2. The spectra are interpreted in the framework of molecular exciton theory to extract a value of the intermolecular transfer integral, J approximately 0.2 eV, for a total exciton bandwidth of ca. 0.8 eV. Monte Carlo calculations were used to determine the density of states of the exciton band and the absorption and emission line shapes of the 0 <-- 0 transition. It is suggested that the "three-humped" absorption profile typical of partially crystalline, regioregular polymers is the "optical signature" of pi-stacking.     

Raman spectroscopy of short-lived terthiophene radical cations generated by photochemical and chemical oxidation.

The Raman spectra of various terthiophene radical cations are investigated; namely those of unsubstituted terthiophene and two styryl-substituted terthiophenes. Transient pump-probe resonance Raman spectroscopy is used to measure the short-lived radical cation spectra of non-end-capped 2,2':5',2'-terthiophene (3T) and 3'-[(E)-2-(4-nitrophenyl)ethenyl]-2,2':5',2'-terthiophene (NO2-pe3T). For these two compounds, the radical cations are generated via either direct photogeneration or photochemically using the electron acceptor tetracyanoethylene. The radical cation of 5,5'-dimethyl-3'-[(E)-2-phenylethenyl]-2,2':5',2'-terthiophene (DM-pe3T) is stable for up to five minutes as a result of the two alpha end caps and continuous-wave resonance Raman spectroscopy and chemical oxidation is used to obtain the spectrum of this radical cation. The resonance Raman spectra of all three terthiophene radical cations are dominated by a group of very intense bands in the low-frequency region. These bands have been assigned, by density functional theory methods, to C-S stretching modes coupled to thiophene ring deformations. These modes are significantly less intense in the sigma-dimer of NO2-pe3T [i.e. the corresponding styryl sexithiophene (NO2-pe3T)2]. This observation is attributed to a smaller change in the C--S bond order in the sexithiophene compared to the analogous terthiophene. This bond order difference may be rationalised by consideration of the singly occupied molecular orbital and lowest unoccupied molecular orbital, which are involved in the electronic transition probed by the laser excitation wavelength.     

Synthesis and characterization of a novel terthiophene-based quinodimethane bearing a 3,4-ethylenedioxythiophene central unit

The synthesis and a combined spectroscopic and density functional theoretical characterization of a 3',4'-ethylenedioxy-5,5' '-bis(dicyanomethylene)-5,5' '-dihydro-2,2':5',2' '-terthiophene analogue of 7,7,8,8-tetracyanoquinodimethane (TCNQ) are presented. Electrochemical data show that this novel trimer can be both reversibly reduced and oxidized at relatively low potentials. Quantum-chemical calculations show that the compound exhibits a quinoidal structure in its ground electronic state and that a certain degree of intramolecular charge transfer takes place from the central terthienyl moiety toward both =C(CN)2 end-caps. Therefore, the amphoteric redox behavior of this novel material can be related to the coexistence of an electron-impoverished terthienyl core endowed by two electron-enriched =C(CN)2 substituents. The UV-vis spectrum is dominated by the appearance of a strong absorption near 660 nm, attributable to the highest occupied molecular orbital (HOMO) --> lowest unoccupied molecular orbital (LUMO) pi-pi electronic transition of the terthienyl spine on the basis of time-dependent density functional theory (DFT) computations. The DFT calculations performed on the minimum-energy molecular geometry about the equilibrium atomic charge distribution, topologies, and energies of the frontier orbitals around the gap and about the Raman-active vibrations associated with the strongest Raman features are also consistent with a rather effective pi-electron conjugation and the partial degree of intramolecular charge transfer mentioned above. Our study reveals this novel heteroquinoid trimer could act as a promising candidate in organic field-effect transistor (OFET) applications.     

Dinuclear palladium-azido complexes containing thiophene derivatives: reactivity toward organic isocyanides and isothiocyanates

Cyclopalladated tetranuclear Pd(II) complexes, [Pd2(micro-Cl)2(Y)]2 (Y = L1 or L2; H2L1 = di(2-pyridyl)-2,2'-bithiophene; H2L2 = 5,5'-di(2-pyridyl)-2,2':5',2'-terthiophene), containing two pyridyl-alpha, alpha'-disubstituted derivatives of thiophene were prepared. Treating these products with PR3 and subsequently with NaN3 produced the dinuclear Pd-azido complexes [(PR3)2(N3)Pd-Y-Pd(N3)(PR3)2] (Y = L1 or L2) or a cyclometallated complex [(PR3)(N3)Pd-Y'-Pd(N3)(PR3)] (Y' = C,N-L2). Reactions of these Pd-azido complexes with CN-Ar (Ar = 2,6-Me(2)C(6)H(3), 2,6-i-Pr(2)C(6)H(3)) or R-NCS (R = i-Pr, Et, allyl) led to the complexes containing end-on carbodiimido groups [(PMe3)2(N[double bond]C[double bond]N-Ar)Pd-Y-Pd(N[double bond]C[double bond]N-Ar)(PMe3)2] or S-coordinated tetrazole-thiolato groups {(PMe3)2[CN4(R)]S-Pd-Y-Pd-S[CN4)(R)](PMe3)2}. Interestingly, when treated with elemental sulfur, the carbodiimido complexes transformed into the cyclometallated derivatives, [(PMe3)(N[double bond]C[double bond]N-Ar)Pd-Y'-Pd(N[double bond]C[double bond]N-Ar)(PMe3)] (Y' = C,N-L1, C,N-L2). We also report the preparation of linear, thienylene-bridged dinuclear Pd complexes [L2(N3)Pd-X(or X')-Pd(N3)L2] (L = PMe3 or PMe2Ph; H2X = 2,2'-bithiophene or H2X' = 2,2':5',2'-terthiophene) and their reactivity toward organic isocyanide and isothiocyanates.     

DFT study of the electronic and charge transfer properties of perfluoroarene–thiophene oligomers

The ground state structures of 5,5″-diperfluorophenyl-2,2′:5′,2″:5″,2‴-quaterthiophene (1), 5,5′-bis{1-[4-(thien-2-yl)perfluorophenyl]}-2,2′-dithiophene (2), 4,4′-bis[5-(2,2′-dithiophenyl)]-perfluorobiphenyl (3), 5,5″-diperfluorophenyl-2,2′:5′,2″-tertthiophene (4), 5,5′-diperfluorophenyl-2,2′-dihiophene (5), and 5,5-diperfluorophenylthiophene (6) have been optimized at the B3LYP/6-31G(d), B3LYP/6-31G(d,p), PBE0/6-31G(d), and PBE0/6-31G(d,p) level of theories. The B3LYP/6-31+G(d) and PBE0/6-31+G(d) level of theories have been applied to investigate the absorption spectra. The PBE0 functional is good to predict the C–S bond lengths while the C–F bond lengths are good envisaged with B3LYP functional. The increment of thiophene rings between two perfluoroarene rings leads to red shift in absorption spectra. The electron affinities are energetically destabilized while energetic stabilization of the radical-cation increases by decreasing the thiophene rings from four to one. The perfluoroarene rings leads to enhance the electron injection.     

Synthesis and properties of novel oligothiophenes surrounded by bicyclo[2.2.2]octene frameworks

Novel oligothiophenes surrounded by bicyclo[2.2.2]octene (abbreviated as BCO) frameworks ranging from dimer to hexamer, 1(nT) (n = 2, 3, 4, 6), were prepared, and their structures and electronic properties were investigated. Dimer 1(2T) was synthesized by oxidative coupling of the 2-lithiated monomer generated from 4,5-BCO-annelated 2-bromothiophene 8 with CuCl2 in 76% yield. Trimer 1(3T) and tetramer 1(4T) were synthesized by Stille coupling of 2,5-dibromo-3,4-BCO-annelated thiophene 4 and of the 5,5'-dibromo derivative of bis(3,4-BCO-thiophen-2-yl) 10 with 2-stannylated 4,5-BCO-annelated thiophene 9 in 41% and 46% yield, respectively. Hexamer 1(6T) was synthesized by oxidative coupling of terthiophene 12, tris-annelated with BCO units, in 81% yield. X-ray crystallographic studies showed that the thiophene rings in 1(2T) and 1(3T) are rotated around the inter-ring C-C bond(s) with the C=C-C=C dihedral angles of -174.3(5) degrees for 1(2T) and -149.7(3) degrees and 34.4(3) degrees for 1(3T). In the crystal structures of 1(2T) and 1(3T), no pi-stacking was observed as expected from the steric effect of the BCO units. Theoretical calculations for 1(2T) and 1(3T) at the B3LYP/6-31G(d) level indicated that the annelation with BCO units either at the 2,3- or 3,4-positions of thiophene rings raises both the KS HOMO and LUMO levels. In the electronic absorption spectra of 1, the longest wavelength absorption band corresponding to the pi-pi transition is bathochromically shifted with the increase in absorption intensity as the number of thiophene rings increases, and the absorption of the polythiophene 1 with infinite length was predicted to be 419 nm. The cyclic voltammetry of 1 in CH2Cl2 at -78 degrees C (2T) or at room temperature (3T, 4T, 6T) showed two reversible oxidation waves, indicating that the radical cation and dication of 1 are stable under these conditions.     

Polyhydroxyoligothiophenes. 2. Hydrogen-Bonding-Oriented Solid State Conformation of 3,3'-Bis(2-hydroxyethyl)-2,2'-bithiophene and Regioselective Synthesis of the Corresponding Head-to-Head/Tail-to-Tail Quater- and Sexithiophene

This paper reports the X-ray structure of 3,3'-bis(2-hydroxyethyl)-2,2'-bithiophene (1), which is the building block for the synthesis of head-to-head/tail-to-tail 2-hydroxyethyl-substituted oligothiophenes. Contrary to all the bithiophenes reported so far, 1 exhibits a noncoplanar anti conformation and an inter-ring twist angle (67.5 degrees ) which is the largest ever measured for adjacent rings of alpha-conjugated oligothiophenes. This unusual conformation appears to be dictated by intermolecular hydrogen-bonding interactions involving the OH groups, which bind the molecule in close packed layers. The paper also describes the regioselective synthesis of the dimer and the trimer of 1, namely of 3,3',4",3"'-tetrakis(2-hydroxyethyl)-2,2':5',2":5",2"'-quaterthiophene (3c) and of 3,3',4",3"',4",3"'-hexakis(2-hydroxyethyl)-2,2':5',2":5",2"':5"',2":5",2"'-sexithiophene (4b). 3c And 4b were obtained through palladium(0)-catalyzed coupling of the mono- and distannanes of the tetrahydropyranyl derivative of 1 with the appropriate monobromo compound (Stille's reaction). Finally, the paper reports force-field calculations which suggest that the low lambda(max) values measured for 1, 3c, and 4b are also the result of intramolecular hydrogen-bonding interactions which favor highly twisted conformations in solution.