Effect of ligand substituents in olefin polymerisation by half-sandwich titanium complexes containing monoanionic iminoimidazolidide ligands-MAO catalyst systems

Various half-sandwich titanium complexes containing iminoimidazolidide ligands, CpTiCl(2)[1,3-R(2)(CH(2)N)(2)C=N] (1a-d) [R = Ph (a), 2,6-Me(2)C(6)H(3) (b), cyclohexyl (c), (t)Bu (d)], have been employed as the catalyst precursors for ethylene polymerisation, syndiospecific styrene polymerisation, and copolymerisation of ethylene with 1-hexene in the presence of MAO cocatalyst; 1d showed the highest catalytic activity for ethylene polymerisation whereas 1b showed the highest activity for syndiospecific styrene polymerisation.     

Tuning the active species from syndiospecific styrene polymerisation to ethylene/styrene copolymerisation by (aryloxo)(cyclopentadienyl)titanium complexes-MAO catalysts

Exclusive formation of poly(ethylene-co-styrene)s were observed by introduction of ethylene into the solution of syndiospecific styrene polymerisation using Cp'TiCl(2)(O-2,6-(i)Pr(2)C(6)H(3)) (Cp' = 1,2,4-Me(3)C(5)H(2), tert-BuC(5)H(4))-MAO catalysts without by-production of syndiotactic polystyrene, whereas the styrene polymerisation did not proceed when ethylene was removed from the reaction mixture of ethylene/styrene copolymerisation.     

Syndiospecific Styrene Polymerization and Ethylene/Styrene Copolymerization Using Half-Titanocenes: Ligand Effects and Some New Mechanistic Aspects

Ethylene/styrene copolymerization catalyzed by half-titanocenes [Cp′TiX₃ (Cp′ = cyclopentadienyl; X = halogen, alkyl etc.), linked half-titanocenes, and modified half-titanocenes expressed as Cp′TiX₂(Y) (Y = anionic donor ligand)] have been reviewed. Results in the syndiospecific styrene polymerization using Cp′TiX₂(Y)–MAO catalysts have also been summarized. The activity and molecular weight in the resultant (co)polymer (and styrene incorporation) are highly affected by ligand (Cp′ and Y). It has been suggested that the cationic Ti(IV) plays a role in the copolymerization whereas the neutral Ti(III) plays a role in the homopolymerization.     

Pyridine bis(imine) cobalt or iron complexes for ethylene and 1-hexene (co)polymerisation

Brookhart and Gibson have recently described the synthesis of new iron and cobalt complexes with pyridine bis(imine) ligands for the polymerisation of ethylene and propylene. In the present paper, the synthesis of new complexes modified with heteroatoms, based on the above-mentioned catalysts, is reported. Higher activities are observed. The influence of the polymerisation temperature on the catalytic activity has been investigated. The first example of the successful copolymerisation of ethylene and 1-hexene with these catalysts is also discussed. The (co)polymers have been characterized by high temperature ¹³C NMR. To cite this article: R. Souane et al., C. R. Chimie 5 (2002) 43–48     

Poly(ethylene oxide) macromonomer-grafted polymer nanoparticles synthesised by emulsifier-free emulsion polymerisation

Ultrafine polymer nanoparticles based on poly(ethylene oxide) (PEO) macromonomer-grafted polystyrene (PS) have been synthesised by emulsifier-free emulsion polymerisation. In addition to the binary copolymerisation between PEO macromonomer and styrene, ternary copolymerisations were also conducted in the presence of a cationic monomer (2-(methacryloyloxy)ethyl) trimethylammonium chloride (MATMAC) as a second comonomer. The size and charge characteristics of fine nanoparticles were characterised using both photon correlation spectroscopy and transmission electron microscopy techniques as well as colloidal titration. It was found that after PEO chains (repeat unit 9 or higher) were incorporated into the PS latex, the particle size was significantly reduced owing to the steric effect contributed from grafted PEO chains. Ternary copolymerisation using MATMAC as comonomer further reduced the particle size, leading to nanoparticles as small as 60 nm. Increasing the MATMAC feed ratio gradually reduced the final size of the nanoparticle, owing to the enhancement in electrostatic stabilisation, whereas increasing the PEO macromonomer feed ratios led to slightly larger particles but significantly inhibited the agglomeration of primary particles. The formation mechanism of the nano- or microparticles with various sizes during polymerisation is discussed in terms of nucleation, agglomeration and adsorption of primary particles.     

单茂钛催化剂的苯乙烯间规聚合和乙烯聚合的比较

考察三甲基铝（ＴＭＡ） 部分水解法制备固体改性甲基铝氧烷（ｍ ＭＡＯ） 时,反应物Ｈ２Ｏ 和ＴＭＡ 的摩尔比对ｍ ＭＡＯ 的产量及ｍ ＭＡＯ 中ＴＭＡ 含量的影响;以五甲基茂基三苄氧基钛［Ｃｐ ＊ Ｔｉ（ＯＢｚ）３］／ｍ ＭＡＯ 组成的均相催化体系,分别考察ｍ ＭＡＯ 的用量［ 即Ａｌ／Ｔｉ 摩尔比］ 及ｍ ＭＡＯ 中ＴＭＡ 含量对苯乙烯间规聚合和乙烯聚合的影响．通过分析Ｃｐ ＊ Ｔｉ（ＯＢｚ）３／ｍ ＭＡＯ 催化体系钛氧化态的分布,发现Ｔｉ（ Ⅲ） 活性中心有利于合成间规聚苯乙烯;而Ｔｉ（ Ⅳ） 活性中心有利于合成聚乙烯．苯乙烯间规聚合时,外加三异丁基铝（ＴＩＢＡ） ,将提高催化活性,同时可节省ＭＡＯ 用量．     

Recalculation of monomer reactivity considering the effect of monomer partitioning in microemulsion

From the copolymerisation data for the microemulsion polymerisation of both partially water soluble monomers ethylacrylate (EA)-methylmethacrylate (MMA) the concentration of the monomer at the polymerisation loci was calculated. While the reported copolymerisation data for the microemulsion copolymerisation of styrene (Sty)-methylacrylate (MA), monomer pair with different solubility and polarity and Sty-butylacrylate (BA), monomer pair with similar solubility and different polarity was used to calculate the monomer concentration at loci. It was inferred from the non-constancy of f^′_A/f_A and f^′_B/f_B ratio that the preferential site of polymerisation might be the emulsifier layer in case of Sty-MA and Sty-BA. While, based on the monomer fraction in the copolymer and the constancy of f^′_A/f_A and f^′_B/f_B it was concluded that microemulsion polymerisation for monomer pair EA-MMA, having similar solubility and polarity, conforms more to bulk polymerisation, where there is no preferential site of polymerisation. The loci concentration rather than feed value was used to recalculate the reactivity at the site of polymerisation. Also the loci concentration was calculated assuming their sum at the polymerisation site equal to unity.     

The polymerisation of functionalised methacrylate monomers in supercritical carbon dioxide

This paper describes the homopolymerisations of isobornyl methacrylate (IBMA) and poly(ethylene glycol) methacrylate (PEGMA) in supercritical carbon dioxide (scCO₂) and copolymerisation with methyl methacrylate (MMA). We have used two different stabiliser systems poly(dimethyl siloxane) monomethylacrylate (PDMS-MMA) and Krytox 157FSL, both of which have been shown previously to be highly effective stabilisers for dispersion polymerisation in scCO₂. The effect of initiator concentration and copolymer composition is studied. For the copolymerisation of IBMA and MMA, under optimised conditions it is possible to form discrete particles with diameters in the range 1.4-3.6 μm. The PDMS-MMA macromonomer was found to be less effective as a stabiliser, causing particle aggregation due to the low solubility of this stabiliser in the monomers. The copolymers of PEGMA and MMA are also studied. The materials have interesting solubility properties with a transition in solubility from aqueous to organic media on increasing the MMA content.     

Amphiphilic graft copolymers - preparation and interfacial properties

Amphiphilic graft copolymers containing poly(ethylene oxide) (PEO) grafts have been prepared by various methods, for example, by coupling of reactive hydrophobic backbone polymers with end-functionalised PEO, by macromonomer copolymerisation, and by anionic graft polymerisation of EO onto polymer backbones carrying functional groups as initiator precursors. The graft copolymers are amphiphilic and were shown to accumulate at surfaces and interfaces in solution and in the solid state. Amphiphilic starch derivatives were prepared by reaction of amylose and starch with aliphatic α-epoxides.     

Thio-Pybox and Thio-Phebox complexes of chromium, iron, cobalt and nickel and their application in ethylene and butadiene polymerisation catalysis

A series of bis(thiazolinyl)- and bis(thiazolyl)pyridine Thio-Pybox ligands and their metal complexes of chromium(III), iron(II), cobalt(II) and nickel(II) has been prepared, as well as a nickel(II) complex containing a monoanionic bis(thiazolinyl)phenyl Thio-Phebox ligand. These new metal complexes have been characterised and used as catalysts, in combination with the co-catalyst MAO, for the polymerisation of ethylene and for the polymerisation of butadiene. In the case of ethylene polymerisation, the Thio-Pybox and Thio-Phebox metal complexes have shown relatively low polymerisation activities, much lower compared to the related bis(imino)pyridine complexes of the same metals. In the polymerisation of butadiene, several Thio-Pybox cobalt(II) complexes show very high activities, significantly higher than the other metal complexes with the same ligand. It is the metal, rather than the ligand, that appears to have the most profound effect on the catalytic activity in butadiene polymerisation, unlike in the polymerisation of ethylene, where bis(imino)pyridine ligands provide highly active catalysts for a range of 1st row transition metals.     

Scandium half-metallocene-catalyzed syndiospecific styrene polymerization and styrene-ethylene copolymerization: unprecedented incorporation of syndiotactic styrene-styrene sequences in styrene-ethylene copolymers

On treatment with 1 equiv of [Ph3C][B(C6F5)4], the scandium half-sandwich bis(alkyl) complex (C5Me4SiMe3)Sc(CH2SiMe3)2(THF) showed extremely high activity (up to 1.36 x 104 kg of sPS/(mol Sc.h)) and syndiospecificity (rrrr > 99%) for the polymerization of styrene at room temperature in toluene. More remarkably, this catalyst system could also effect the syndiospecific copolymerization of styrene with ethylene to yield styrene-ethylene copolymers having syndiotactic styrene-styrene sequences. The styrene content in the copolymers could be easily controlled by changing the styrene feed and could reach higher than 80 mol %. This is the first example of formation of such types of styrene-ethylene copolymers, which are expected to show novel properties.     

单茂金属烯烃聚合催化剂*

本文综述了近年来带有给电子配体的单茂金属化合物应用于烯烃聚合的研究。带有给电子配体的单茂金属化合物是目前烯烃配位聚合催化剂的研究热点之一。作为新型的聚合催化剂,这类催化剂具有合成简单、结构清晰的特点,用于催化烯烃聚合,可得到高聚合活性,同时聚合物可得到高的分子量。用于共聚时,具有很好的共聚能力。通过共聚,可以得到Zieler-Natta催化剂和传统茂金属催化剂不能得到的新共聚物。通过调整催化剂上茂配体和给电子配体的结构,可以方便地调节聚合行为,从而调整聚合物的结构。文中涉及了乙烯、alpha-烯烃的均聚与共聚,乙烯与环烯烃共聚合,苯乙烯聚合等方面的研究。     

Mao based catalysts for syndiotactic polystyrene (sPS)

Several non-metallocene (Ti, Zr) and substituted mono-Cp titanium metallocenes have been tested in the presence of methylalumoxane (MAO) as catalyst for syndiospecific polymerization of styrene. Effect of substitutions on the titanium and Cp ligand, molar ratio of Al/Ti, TMA and temperature on activity, Mwt. and % sPS were studied. CpTi(OiPr)₃ gives a less active catalyst than Cp*Ti(OiPr)₃ and the resulting sPS is less stereoregular and of lower molecular weight.     

Syndiotactic polypropene with MCM‐41 supported metallocene [Me2C(Cp)(Flu)]ZrCl2

Mesoporous aluminosilicates – type MCM‐41 – were used as carriers for syndiospecific propene polymerisation using [Me₂C(Cp)(Flu)]ZrCl₂/MAO as catalyst. Alumina‐free mesoporous MCM‐41 reveals a far greater polymerisation activity than the analogous carrier containing alumina. The use of MCM‐41 as carrier material at low propene concentration and high polymerisation temperature produces syndiotactic polypropene (sPP) with higher syndiotacticity and higher melting points than achieved when using a homogenous system or a supported system based on spherical SiO₂.     

Co‐syndiospecific Alternating Copolymerization of Functionalized Propylenes and Styrene by Rare‐Earth Catalysts

The precise control of monomer sequence and stereochemistry in copolymerization is of much interest and importance for the synthesis of functional polymers, but studies toward this goal have met with only limited success to date. Now, the co‐syndiospecific alternating copolymerization of methoxyphenyl‐ and N,N‐dimethylaminophenyl‐functionalized propylenes with styrene by half‐sandwich rare‐earth catalysts is reported. This reaction efficiently afforded the corresponding functionalized propylene‐alt‐styrene copolymers with a perfect alternating sequence and excellent co‐syndiotacticity (rrrr >99 %), thus constituting the first example of co‐stereospecific alternating copolymerization of polar and non‐polar olefins.     

Selective Insertion in Copolymerization of Ethylene and Styrene Catalyzed by Half‐Titanocene System Bearing Ketimide Ligand: A Theoretical Study

The copolymerization of ethylene and styrene can be efficiently carried out by using Cp*TiCl₂ (N = C^t Bu₂)/MAO (Cp*=η ⁵‐C₅Me₅ ) system, yielding the poly(ethylene‐co ‐styrene)s with isolated styrene units. In order to investigate the reasons for formation of the structure, the mechanism of copolymerization, especially the selective insertion of ethylene and styrene, is studied in detail by density functional theory (DFT ) method. At the initiation stage, insertion of ethylene is kinetically more favorable than insertion of styrene, and insertion of styrene kinetically and thermodynamically prefers 2,1‐insertion. That is different from the conventional half‐titanocene system, in which the 1,2‐insertion is favorable. At chain propagation stage, the computational results suggest that the continuous insertion of styrene is hard to occur at room temperature due to the high free energy barriers (28.90 and 35.04 kcal/mol for 1,2‐insertion, and 29.15 and 34.00 kcal/mol for 2,1‐insertion) and thermodynamically unfavorable factors in two different conditions. That is mainly attributed to the steric hindrance between the coming styrene and chain‐end styrene or ketimide ligand. The computational results are in good agreement with the experimental data.     

Mechanism of syndiotactic-specific polymerization of styrene

Perusal of literature data and some new results concerning syndiotactic-specific polymerization of styrene suggest a reaction mechanism accounting for the steric control. Key features of the proposed mechanism are stereorigid ηⁿ coordination of the growing chain end and diastereoselective coordination of the monomer imposed by direct interactions with the ancillary ligand of the metal complex, a pseudotetrahedral chiral Ti(III) or Zr(III) cation, which inverts its configuration after every syndiospecific insertion step.     

Self-modeling curve resolution analysis of on-line vibrational spectra of polymerisation and transesterification

This article discusses the potential of self-modeling curve resolution analysis (SMCR) for the evolution of on-line vibrational spectral data of polymerisation and transesterification. After the general introduction of the SMCR approach, representative SMCR techniques like orthogonal projection analysis (OPA) and simple-to-use interactive self-modeling mixture analysis (SIMPLISMA) are briefly outlined. As examples the SMCR analysis of the Raman spectra of the block copolymerisation of styrene and 1,3-butadiene and that of the near-infrared (NIR) spectra of the melt-extrusion transesterification of ethylene-vinylacetate copolymer will be illustrated. In the last part of this review paper, a new powerful SMCR method that we have recently proposed is demonstrated.     

ETHYLENE POLYMERIZATION AND COPOLYMERIZATION WITH POLAR MONOMERS BY A NEUTRAL NICKEL CATALYST COMBINED WITH CO-CATALYST OF Ni（COD）2 OR AL（i-Bu）3

A neutral nickel (Ⅱ) catalyst D, { [O-(3-cyclohexyl)(5-Cl)C6H2-ortho-C(H)=N-2,6-C6H3(i-Pr)2]Ni(Ph3P)(Ph)} has been synthesized and characterized by 1H-NMR, FTIR and elemental analysis. The results indicate that Al(i-Bu)3 is an effective cocatalyst for the neutral nickel catalyst. With bis(1,5-cyclooctadiene) nickel(0) [Ni(COD)2] or Al(i-Bu)3 as a cocatalyst, the neutral nickel catalyst D is active for ethylene polymerisation and copolymerisation with polar monomers (tertbutyl 10-undecenoate(BU), methyl 10-undecenoate (MU), allyl alcohol (AA) and 4-penten-1-ol (PO)) under mild conditions.The resulting polymers were characterized by 1H-NMR, FTIR, DSC, and GPC. From the comparative studies, Ni(COD)2 is more active than Al(i-Bu)3 for ethylene homopolymerization, while Al(i-Bu)3 is more effective than Ni(COD)2 for ethylene copolymerisation with polar monomers. The polymerization parameters which affect both the catalytic activity and properties of the resulting polyethylene were investigated in detail. Under the conditions of 20 μmol catalyst D and Ni(COD)2/D = 3(molar ratio) in 30 mL toluene solution at 45℃, 12 × 105 Pa ethylene for 20 min, the polymerization activity reaches as High as7.29×105gPE.(mol.Ni·h)-1and Mηis 7.16×104g.mol-1.For ethylene copolymerization with polar monomers,the effect of comonomer concentrations was examined. As high as 0.97 mol% of MU, 1.06 mol% of BU, 1.04 mol% of AA and 1.37 mol% of PO were incorporated into the polymer, respectively, catalyzed by D/Al(i-Bu)3 system.     

The effect of acrylic acid amount on the colloidal properties of polystyrene latex

Poly(styrene-co-acrylic acid) (St/AA) latices were prepared by using a batch soap-free emulsion copolymerisation in non-buffered medium. Polymerisation kinetics, followed by gravimetric method, revealed that increasing AA comonomer concentration was directly proportional to the copolymerisation rate, while adding AA comonomer caused a strong decrease of particle size of final St/AA latex particle without affecting the size distribution. Transmission electron microscopy indicated that the particles were monodispersed and spherical in shape irrespective of AA amount used in the investigated range. The colloidal stability of the latices was increased upon increasing the AA concentration; owing to the electrosteric stabilisation originated from AA-rich layer on the particle surface. In addition, electrophoretic mobility of formed particles versus polymerisation conversion exhibited the constancy of the surface charge density during the polymerisation process and was inferred for discussion of the polymerisation mechanism of this system.