Zn NMR investigation of zinc halides

⁶⁷Zn NMR has been used as a probe to measure the electric field gradients at the metal site in the zinc halides ZnF₂, γ-ZnCl₂, ZnBr₂ and ZnI₂ and Rb₂ZnCl₄ at room temperature. In addition two hydration states have been detected for ZnSO₄. For ZnF₂ and γ-ZnCl₂ an ab initio calculation of the electric field gradient at the Zn site using the W 97 code agrees well with the experimentally observed values.     

Practical Cu-catalyzed amination of functionalized heteroaryl halides

The amination of a variety of highly functionalized heterocyclic bromides has been accomplished using a CuI/proline catalyst system. The current study significantly expanded the scope of the reaction by using examples relevant to drug discovery programs and has demonstrated reaction rate acceleration using microwave heating.     

Reactions of phosphorus halides with urethane

By the reaction of phosphorus trichloride, thiophosphoryl chloride, phosphorus oxychloride and phosphorus pentachloride with urethane in stoichiometric ratio 1:1 or 1:2 in benzene, compounds of the type

and

(X = S, O or Cl; n = 1 or 2) have been synthesized. A probable mechanism for their formation has also been suggested.     

Photochemistry of aryl halides: Photodissociation dynamics

In recent years, the photodissociation dynamics of aryl halides has been a subject of intensive studies, which is closely related to the atmospheric chemistry. Here we present a review on the photochemistry of aryl halides, with emphasis on the recent progress in photodissociation dynamics at 266 nm by using photofragment translational spectroscopy. The ab initio calculations have also been employed to investigate those photodissociation processes. It has been found that the photodissociation of aryl halides at 266 nm is attributed to the nonadiabatic process via intersystem crossings from bound singlet excited state to triplet excited state and/or via internal conversion from bound singlet excited state to ground state. Also, the substitution effects in the photodissociation dynamics of aryl halides are discussed.     

Effective synthesis of benzyl halides triggered by in situ prepared hypervalent halides

An effective approach for the direct benzylhalogenation with in situ generation of hypervalent halides has been developed.A variety of benzyl halides are produced in moderate to excellent yields(up to 99%) with high regioselectivities.UV absorption spectrum is employed to detect the formation of ferr-butyl hypoiodite.     

Synthesis and characterization of cyclopentadienyl transition metal halides,part I,vanadium halides

Summary Reactions between -Cp₂V and PX₃ (X=Cl, Br or I) yield the corresponding dihalogenated derivatives -Cp₂VX₂ (X=Cl, Br or I). The oxidative addition of ICl and IBr to -Cp₂V gives mixed halogenated derivatives -Cp₂VIX (X=Cl or Br). All the compounds have been characterized by elemental analyses, magnetic moment measurements and i.r. and e.p.r. spectra.     

Indolocarbazole-based foldamers capable of binding halides in water

A series of indolocarbazole-based foldamers have been prepared which can fold into a helical array with an internal cavity encircled by multiple indole NHs, thus allowing for binding anions by hydrogen bonds. The helical folding has been confirmed by computer modeling, 1H NMR spectroscopy, 2D ROESY experiments, and binding studies. A water-soluble derivative binds small, hydrophilic anions in the order Cl- > F- > Br- but negligibly with large, diffuse anions such as I- and ClO4-. Interestingly, the relative binding affinities of the fluoride and chloride ions in water are opposite to each other in an organic medium 4:1 (v/v) DMSO/MeOH, possibly due to the difference in the competing solvation energy.     

Reusable Cu2O/PPh3/TBAB system for the cross-couplings of aryl halides and heteroaryl halides with terminal alkynes

An efficient and reusable Cu2O/PPh3/TBAB (n-Bu4NBr) system for the cross-coupling reactions of aryl and heteroaryl halides with terminal alkynes has been developed. Four types of Cu2O, including bulky Cu2O, cubic Cu2O nanoparticles, octahedral Cu2O nanoparticles, and spherical Cu2O nanoparticles, were examined, and the octahedral Cu2O nanoparticles were found to be the most effective catalyst for the reaction. In the presence of the octahedral Cu2O nanoparticles, PPh3, and TBAB, a variety of aryl and heteroaryl halides were reacted with alkynes including alkynols smoothly in moderate to good yields. Noteworthy is that the Cu2O/PPh3/TBAB system can be recovered and reused several times without loss of any activities.     

Triorganophosphine–dithiomonometaphosphoryl halides

The title compounds, ethyldiphenylphosphine–dithiomono­metaphosphoryl chloride, EtPh₂PPS₂Cl, C₁₄H₁₅ClP₂S₂, (I), and tris‐n‐propyl­phosphine–di­thio­monometa­phospho­ryl chloride and bromide, ⁿPr₃PPS₂Cl, C₉H₂₁ClP₂S₂, (II), and ⁿPr₃PPS₂Br, C₉H₂₁BrP₂S₂, (III), respectively, are the first phosphine‐stabilized di­thio­monometa­phospho­ryl halides to be structurally characterized. In the tris‐n‐propyl­phosphine derivatives, the central PP donor–acceptor bond becomes longer in the order bromo < chloro < fluoro. Substitution of the tris‐n‐propyl­phosphine group in (II) by the more bulky ethyl­di­phenyl­phosphine group also leads to a longer PP bond. These structural features agree with the observed ³¹P NMR data. In (II) and (III), the central P—P bond coincides with the crystallographic threefold axis, entailing site‐occupational disorder for the S₂Y group.     

Pyridine-type complexes of transition-metal halides

Manganese(II) chloride complexes with 3,4- and 3,5-lutidine have been prepared. The crystal symmetry and cell dimensions have been calculated on the basis of powder diffraction data. The compounds were characterised also by FT-IR spectrometry. The thermal decomposition of the complexes has been studied by thermogravimetry and DSC. By plotting densities vs. molar mass, the diagram obtained has correspondence to similar observations in other solid metal-lutidine complex systems. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dehydrohalogenation of ethyl halides

Unimolecular decomposition kinetics of selected ethyl halides, phenethyl halides and methoxyphenethyl halides have been investigated using high level computational chemistry methods. The phenethyl halides decompose faster than the ethyl halides due to a more electronegative chlorine atom, induced by the chloroethyl functionality as an electron-withdrawing group. 1-Chloro-2-(methylthio)ethane exhibits faster dehydrochlorination than that of chloroethane/1-chloro-2-methoxyethane, owing to more polarisable C?H and C?Cl bonds in the transition structures. Calculations suggest that electronic factors rather than anchimeric assistance influence the dehydrochlorination reactions.     

Synthesis and characterization of cyclopentadienyl halides of transition metals: Part II,chromium halides

Summary -Cp₂Cr reacts with PX₃ (X = Cl, Br or I) to give monocyclopentadienylchromium(III) derivatives -CpCrX₂ (X = Cl, Br or I), while oxidative additions of IBr and ICl to -Cp₂Cr give the corresponding mixed halogenated derivatives, -Cp₂CrIX (X = Cl or Br). All products have been characterized by elemental analyses, magnetic moment measurements and by i.r. and e.p.r. spectra.     

Development of Pd/C-catalyzed cyanation of aryl halides

A practical method for palladium-catalyzed cyanation of aryl halides using Pd/C is described. The new method can be applied to a variety of aryl bromide and active aryl chloride substrates to effect efficient conversions. The process features many advantages over existing cyanation conditions and the practical utility of the process has been demonstrated on scale.     

Quantum chemical study of allyl halides

Using the MNDO method we have shown that the bathochromic shift of the longwavelength region of absorption in the electronic spectrum of allyl bromide and allyl iodide on going to nonplanar conformers is due to the fact that, in this case, the transition ^* to the low-lying ^* orbital appears, which is forbidden in planar forms. In allyl fluoride and allyl chloride, , and the transition ^*, which depends little on conformation, is long-wavelength. In the gauche conformers of allyl halides, the frontier MOs are appreciably delocalized as a result of - interaction; in the s-trans conformer, the unshared pair of the heteroatom makes an insignificant contribution to the orbital only in allyl iodide.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2552–2557, November, 1989.     

Molecular motion in solid ethyltrimethylammonium halides

Proton magnetic resonance spectra have been studied over a wide temperature range for polycrystalline ethyltrimethylammonium halides [C₂H₃N(CH₃)₃]⁺X⁻, where X⁻ = Cl⁻, Br⁻ and I⁻. For the bromide and its ethyl-deuterated analogue, the proton relaxation times T₁ were also measured vs. temperature. Analysis of the experimental data yields information on the activation parameters for molecular motion within the cation and of the cation as a whole. The potential barriers determined increase as anion size decreases.     

Lewis acidity of gallium halides

The Lewis acidity of GaF(3), GaF(2)Cl, GaFCl(2), and GaCl(3) in acid-base interactions has been studied by taking ammonia as their electron-donating counterpart. We have derived an unoccupied reactive orbital that shows the maximum localization on the Ga atomic center for each species. The orbital is located lower in energy compared to those in the corresponding boron and aluminum halides. In contrast to boron halides, the unoccupied reactive orbital of the acid site tends to be delocalized considerably on the halogens as the fluorines are substituted by chlorines in gallium halides. The trend observed in the effects of fluorine and chlorine on the acidity of the gallium halides is opposite to those found in the boron halides. This cannot be interpreted solely in terms of the electron-accepting strength of the gallium center, but can be understood by including electrostatic interactions and closed-shell repulsion with ammonia in the adducts. The origin of the difference in Lewis acidity of BCl(3), AlCl(3), and GaCl(3) has been clarified.     

Mutual-diffusion of some transition metal halides

The diffusion of some zinc and cobalt salts in water have been measured using an improved version of the capillary technique. In this technique, diffusion proceeds in the absence of stirring in the bulk solution. The amount of diffusing substance which remains in the capillary is analyzed after a chosen time. Nanis' solution for three-dimensional diffusion from a capillary has been used to calculate the experimental values. The values of diffusion coefficient of zinc iodide, cobalt bromide and cobalt iodide have been obtained with a diffusion run time of four hours. A comparison has been made between the experimental and theoretical values obtained from Onsager-Fuoss theory. An attempt has also been made to explain the deviation between the experimental and theoretical values over the concentration range studied.     

Chemical effects induced by gamma-irradiated alkali halides in organic emulsions

Dissolution of -irradiated alkali halides in the emulsions of aromatic hydrocarbon and water results in the formation of halogen charge transfer complexes and hydrogen. These have been identified by spectrophotometry. Further, their formation has been verified by studying the absorption of a chemical model involving hydrogen incorporated in halogen complex. These products are correlated to the F and hole centers of the irradiated salts.     

Oxidation of benzyl alcohols, benzyl halides, and alkylbenzenes with oxone

Oxidation of benzyl alcohols, benzyl halides, and alkylbenzenes to their corresponding oxidation products has been shown to be accomplished directly with oxone. The methodology that involves mere stirring/heating of the reactants and oxone in acetonitrile/water (1:1, v/v) is simple and practical, but is limited to substrates that do not contain sensitive functionalities and heteroaromatic rings.