A dynamic open framework exhibiting guest- and/or temperature-induced bicycle-pedal motion in single-crystal to single-crystal transformation

A ligand bis(4-imidazol-1-yl-phenyl)diazene (azim) incorporating an azo moiety at the center and two imidazole groups at the terminals forms two coordination polymers {[Co(azim)(2)(DMF)(2)]·(ClO(4))(2)·2DMF}(n) (1) and {[Cd(azim)(2)(DMF)(2)]·(ClO(4))(2)·2DMF}(n) (2) (DMF = N,N'-dimethylformamide) at room temperature. Both 1 and 2 are isostructural with rhombic two-dimensional sheets stacking in ABAB... fashion resulting in large voids that contain DMF and ClO(4)ˉ as guests. In 1, the azo groups and phenyl rings are disordered over two positions and as in usual cases, the pedal motion cannot be discerned. Upon heating, 1 turns amorphous. In the case of 2, however, heat treatment does not lead to loss of crystallinity. Thus, when a crystal of 2 (mother crystal) is heated slowly, it causes substantial movement or escape of both metal-bound and lattice DMF besides movement of ClO(4)ˉ anions to give daughter crystals 2a, 2b, and 2c without losing crystallinity (single-crystal to single-crystal (SC-SC) transformation). Most interestingly, the X-ray structures of 2 and its daughter products reveal stepwise reversible bicycle-pedal or crankshaft motion of the azo group. When a crystal of 2c is kept in DMF for 10 h, crystal 2' is formed whose structure is similar to that of 2 with slight changes in the bond distances and angles. Also, crystals of 2 are converted to 3 and 4 upon being kept in acetone or DEF (DEF = N,N'-diethylformamide), respectively, for 10 h at ambient temperature in SC-SC transformation. In 3, each lattice DMF molecule is replaced by an acetone molecule, leaving the two coordinated DMF molecules intact. However, in 4, all lattice and coordinated DMF molecules are replaced by equal number of DEF molecules. Both in 3 and 4, the azo moieties show bicycle-pedal motion. Thus, bicycle-pedal motion that normally cannot be observed is shown here to be triggered by heat as well as guest molecules in SC-SC fashion.     

NbO lattice MOFs based on octahedral M(II) and ditopic pyridyl substituted diketonate ligands: structure, encapsulation and guest-driven luminescent property

Two NbO-type MOFs based on ditopic pyridyl substituted diketonate ligands were reported. One exhibits a reversible SC-SC water encapsulation, while the other shows an interesting guest-driven luminescent property based on M(III) acetylacetonate (M = Eu and Fe) guest species.     

Recent advance in porous coordination polymers from the viewpoint of crystalline-state transformation

Recently,research of crystalline-state transformation involving the removal/inclusion of guest molecules in porous coordination polymers(PCPs) was underway.Crystalline-state transformation,especially,single-crystal to single-crystal(SC-SC) transformation as new method for the direct observation of host-guest chemistry,can reveal the intrinsic relevance and interaction between the framework and guest molecules.This review describes our work concerning PCPs and recent investigations of others,within the last ...     

Microporosity of a Guanidinium Organodisulfonate Hydrogen-Bonded Framework

Guanidinium organosulfonates (GSs) are a large and well-explored archetypal family of hydrogen-bonded organic host frameworks that have, over the past 25 years, been regarded as nonporous. Reported here is the only example to date of a conventionally microporous GS host phase, namely guanidinium 1,4-benzenedisulfonate ( p -G₂BDS ). p -G₂BDS is obtained from its acetone solvate, AcMe@ G₂BDS , by single-crystal-to-single-crystal (SC-SC) desolvation, and exhibits a Type I low-temperature/pressure N₂ sorption isotherm (SA_BET=408.7(2) m² g⁻¹, 77 K). SC-SC sorption of N₂, CO₂, Xe, and AcMe by p -G₂BDS is explored under various conditions and X-ray diffraction provides a measurement of the high-pressure, room temperature Xe and CO₂ sorption isotherms. Though p -G₂BDS is formally metastable relative to the “collapsed”, nonporous polymorph, np -G₂BDS , a sample of p -G₂BDS survived for almost two decades under ambient conditions. np -G₂BDS reverts to zCO₂@ p -G₂BDS or yXe@ p -G₂BDS (y,z=variable) when pressure of CO₂ or Xe, respectively, is applied.     

Single-crystal to single-crystal structural transformation and photomagnetic properties of a porous iron(II) spin-crossover framework

The porous coordination framework material, Fe(NCS)2(bped)2 x 3EtOH, SCOF-3(Et) (where bped is dl-1,2-bis(4'-pyridyl)-1,2-ethanediol), displays a spin-crossover (SCO) transition that has been stimulated both thermally and by light irradiation. The one-step thermal SCO (70-180 K) is sensitive to the presence of molecular guests, with a more gradual transition (70-225 K) apparent following the desorption of ethanol molecules that hydrogen bond to the spin centers. Additional intraframework hydrogen-bonding interactions stabilize the vacant one-dimensional pore structure of the apohost, SCOF-3, despite a dramatic single-crystal to single-crystal (SC-SC) structural change upon removal of the guests. Comprehensive structural analyses throughout this transformation, from primitive orthorhombic (Pccn) to body-centered tetragonal (I4/mcm), reveal a flexing of the framework and a dilation of the channels, with an accompanying subtle distortion of the iron(II) coordination geometry. Photomagnetic measurements of the light-induced excited spin state trapping (LIESST) effect have been used to assess the degree of cooperativity in this system.     

Two ligand-functionalized Pb(ii) metal-organic frameworks: structures and catalytic performances

A microporous Pb(ii) metal-organic framework (MOF) [PbL(2)]·2DMF·6H(2)O (1) has been assembled from a N-oxide and amide doubly functionalized ligand HL (= N-(4-carboxyphenyl)isonicotinamide 1-oxide). Complex 1 features a three-dimensional (3D) framework possessing one-dimensional (1D) rhombic channels with dimensions of 13 × 13 ?(2). The 3D framework is built up from 1D PbO(2) chains that link ligands in parallel fashion to construct single-wall channels. When recrystallizing 1 in a DMSO-DMF mixture (3?:?5 v/v), a new coordination polymer, [PbL(2)]·DMF·2H(2)O (2), was obtained. Complex 2 is also a 3D framework containing 1D rectangular channels, but the channel dimensions become reduced in size to 13 × 8 ?(2) due to reorganization of the Pb(ii) coordination environment. The PbO(2) chains in 2 are reformed to link ligands in a double-wall fashion, significantly reducing the channel size. Even though, the guest exchange study indicates that the DMF molecules in 2 could be replaced with benzene molecules when immersing in benzene solvent, showing single-crystal-to-single-crystal (SC-SC) guest exchange in the solid state and leading to a daughter crystal [PbL(2)]·0.5C(6)H(6)·2H(2)O (2'). Desolvated 1 and 2 display preferential adsorption behaviors of water vapour over CO(2) due to the hydrophilic nature of the channels and the strong host-guest interactions. Catalytic tests indicate that desolvated 1 and 2 have size-selective catalytic activity towards the Knoevenagel condensation reaction.     

Single-Crystal to Single-Crystal Transformations: Stepwise CO2 Insertions into Bridging Hydrides of [(NHC)CuH]2 Complexes

Mechanistic studies of substrate insertion into dimeric [(NHC)CuH]₂ (NHC=N-heterocyclic carbene) complexes with two bridging hydrides have been shown to require dimer dissociation to generate transient, highly reactive (NHC)Cu−H monomers in solution. Using single-crystal to single-crystal (SC-SC) transformations, we discovered a new pathway of stepwise insertion of CO₂ into [(NHC)CuH]₂ without complete dissociation of the dimer. The first CO₂ insertion into dimeric [(IPr*OMe)CuH]₂ (IPr*OMe=N,N′-bis(2,6-bis(diphenylmethyl)-4-methoxy-phenyl)imidazole-2-ylidene) produced a dicopper formate hydride [(IPr*OMe)Cu]₂(μ-1,3-O₂CH)(μ-H). A second CO₂ insertion produced a dicopper bis(formate), [(IPr*OMe)Cu]₂(μ-1,3-O₂CH)(μ-1,1-O₂CH), containing two different bonding modes of the bridging formate. These dicopper formate complexes are inaccessible from solution reactions since the dicopper core cleanly ruptures to monomeric complexes when dissolved in a solvent.     

Coordination-bond-directed synthesis of hydrogen-bonded organic frameworks from metal–organic frameworks as templates

Controlled synthesis of hydrogen-bonded organic frameworks (HOFs) remains challenging, because the self-assembly of ligands is not only directed by weak hydrogen bonds, but also affected by other competing van der Waals forces. Herein, we demonstrate the coordination-bond-directed synthesis of HOFs using a preformed metal–organic framework (MOF) as the template. A MOF (Cu^I-TTFTB) based on two-coordinated Cu^I centers and tetrathiafulvalene-tetrabenzoate (TTFTB) ligands was initially synthesized. Cu^I-TTFTB was subsequently oxidized to the intermediate (Cu^II-TTFTB) and hydrated to the HOF product (TTFTB-HOF). Single-crystal-to-single-crystal (SC-SC) transformation was realized throughout the MOF-to-HOF transformation so that the evolution of structures was directly observed by single-crystal X-ray diffraction. The oxidation and hydration of the Cu^I center are critical to breaking the Cu–carboxylate bonds, while the synergic corbelled S⋯S and π⋯π interactions in the framework ensured stability of materials during post-synthetic modification. This work not only provided a strategy to guide the design and discovery of new HOFs, but also linked the research of MOFs and HOFs.

The MOF-to-HOF transformation was realized in a single-crystal-to-single-crystal manner by the oxidation and hydration of the Cu^I center in Cu^I-TTFTB. The corbelled S⋯S and π⋯π interactions ensured the framework stability during transformation.     

Amide-silyl ligand exchanges and equilibria among group 4 amide and silyl complexes

M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiButPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2)2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2)5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 <--> 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N)3Zr(SiButPh2)2]-[Zr(NMe2)5Li2(THF)4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N)3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe3)2]- (7) in reversible reaction: 6a + 2 2 <--> 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3)3]- (8) <--> (Me2N)3M-Si(SiMe3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2)5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 <--> 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf-Si(SiMe3)3 (9b), and [Hf(NMe2)4]2 (dimer of 1b), as well as the preparation of (Me2N)3M-N(SiMe3)2 (6a; 6b) are also reported.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Anionic Roussin's red esters (RREs) syn-/anti-[Fe(mu-SEt)(NO)2]2(-): the critical role of thiolate ligands in regulating the transformation of RREs into dinitrosyl iron complexes and the anionic RREs

The anionic syn-/ anti-[Fe(mu-SEt)(NO) 2] 2 (-) ( 2a) were synthesized and characterized by IR, UV-vis, EPR, and X-ray diffraction. The geometry of the [Fe(mu-S) 2Fe] core is rearranged in going from [{Fe(NO) 2} (9)-{Fe(NO) 2} (9)] Roussin's red ester [Fe(mu-SEt)(NO) 2] 2 ( 1a) (Fe...Fe distance of 2.7080(5) A) to the [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] complex 2a (Fe...Fe distance of 2.8413(6) A) to minimize the degree of Fe...Fe interaction to stabilize complex 2a. On the basis of X-ray absorption (Fe K- and L-edge), EPR and SQUID, complex 2a is best described as the anionic [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] Roussin's red ester with the fully delocalized mixed-valence core. The complete bridged-thiolate cleavage yielded DNIC [(EtS) 2Fe(NO) 2] (-) ( 3a) in the reaction of 2 equiv of [EtS] (-) and complex 1a, whereas reaction of 2 equiv of [(t)BuS] (-) with [Fe(micro-S (t)Bu)(NO) 2] 2 (1b) gave DNIC [((t)BuS) 2Fe(NO) 2] (-) (3b) and the anionic Roussin's red ester [Fe(mu-S (t)Bu)(NO) 2] 2 (-) (2b) through bridged-thiolate cleavage in combination with reduction. In contrast to the inertness of DNIC 3b toward complex 1b, nucleophile DNIC 3a induces the reduction of complex 1a to produce the anionic Roussin's red ester 2a. Interestingly, dissolution of complex 3a in MeOH at 298 K finally led to the formation of a mixture of complexes 2a and 3a, in contrast to the dynamic equilibrium of complexes 3b and 1b observed in dissolution of complex 3b in MeOH. These results illustrate the aspect of how the steric structures of nucleophiles ([EtS] (-) vs [ (t)BuS] (-) and [(EtS) 2Fe(NO)2](-) vs [((t)BuS) 2Fe(NO)2] (-)) function to determine the reaction products.     

Insertion of CO2, CS2, and COS into iron(II)-hydride bonds

The reactions between cis-Fe(dmpe)2H2 (dmpe = Me2PCH2CH2PMe2) (1) or cis-Fe(PP3)H2 (PP3 = P(CH2CH2PMe2)3) (2) and carbon dioxide (CO2), carbon disulfide (CS2), and carbonyl sulfide (COS) are investigated. At 300 K, additions of CO2 (1 atm), CS2 (2 equiv), and COS (1 atm) to 1 result in the formation of a stable transformato hydride, trans-Fe(dmpe)2(OCHO)H (3a), a trans-dithioformato hydride, trans-Fe(dmpe)2(SCHS)H (4a), and a trans-thioformato hydride, trans-Fe(dmpe)2(SCHO)H (5a), respectively. When CS2 and COS are added to cis-Fe(dmpe)2H2 at 195 K, a cis-dithioformato hydride, 4b, and a cis-thioformato hydride, 5b, respectively, are observed as the initially formed products, but there is no evidence of the corresponding cis-formato hydride upon addition of CO2 to cis-Fe(dmpe)2H2. Additions of excess CO2, CS2, and COS to 1 at lower temperatures (195-240 K) result in the formation of a trans-bis(formate), trans-Fe(dmpe)2(OCHO)2 (3b), a trans-bis(dithioformate), trans-Fe(dmpe)2(SCHS)2 (4c), and a cis-bis(thioformate), cis-Fe(dmpe)2(SCHO)2 (5c), respectively. trans-Fe(dmpe)2(SCHO)2 (5d) is prepared by the addition of excess COS at 300 K. Additions of CO2 (1 atm), CS2 (0.75 equiv), and COS (1 atm) to 2 at 300 K result in the formation of a thermally stable, geometrically constrained cis-formato hydride, cis-Fe(PP3)(OCHO)H (6a), a cis-dithioformato hydride, cis-Fe(PP3)(SCHS)H (7a), and a cis-thioformato hydride, cis-Fe(PP3)(SCHO)H (8a), respectively. Additions of excess CO2 and COS to 2 yield a cis-bis(formate), cis-Fe(PP3)(OCHO)2 (6b), and a thermally stable cis-bis(thioformate), cis-Fe(PP3)(SCHO)2 (8b), respectively. All complexes are characterized by multinuclear NMR spectroscopy, with IR spectroscopy and elemental analyses confirming structures of thermally stable complexes where possible. Complexes 3b and 5a are also characterized by X-ray crystallography.     

Single fluorescent probe responds to H2O2, NO, and H2O2/NO with three different sets of fluorescence signals

Hydrogen peroxide (H(2)O(2)) acts as a signaling molecule in a wide variety of signaling transduction processes and an oxidative stress marker in aging and disease. However, excessive H(2)O(2) production is implicated with various diseases. Nitric oxide (NO) serves as a secondary messenger inducing vascular smooth muscle relaxation. However, mis-regulation of NO production is associated with various disorders. To disentangle the complicated inter-relationship between H(2)O(2) and NO in the signal transduction and oxidative pathways, fluorescent reporters that are able to display distinct signals to H(2)O(2), NO, and H(2)O(2)/NO are highly valuable. Herein, we present the rational design, synthesis, spectral properties, and living cell imaging studies of FP-H(2)O(2)-NO, the first single-fluorescent molecule, that can respond to H(2)O(2), NO, and H(2)O(2)/NO with three different sets of fluorescence signals. FP-H(2)O(2)-NO senses H(2)O(2), NO, and H(2)O(2)/NO with a fluorescence signal pattern of blue-black-black, black-black-red, and black-red-red, respectively. Significantly, we have further demonstrated that FP-H(2)O(2)-NO, a single fluorescent probe, is capable of simultaneously monitoring endogenously produced NO and H(2)O(2) in living macrophage cells in multicolor imaging. We envision that FP-H(2)O(2)-NO will be a unique molecular tool to investigate the interplaying roles of H(2)O(2) and NO in the complex interaction networks of the signal transduction and oxidative pathways. In addition, this work establishes a robust strategy for monitoring the multiple ROS and RNS species (H(2)O(2), NO, and H(2)O(2)/NO) using a single fluorescent probe, and the modularity of the strategy may allow it to be extended for other types of biomolecules.     

Structural and magnetic studies of Schiff base complexes of nickel(II) nitrite: change in crystalline state, ligand rearrangement and a very rare μ-nitrito-1κO:2κN:3κO' bridging mode

Four new nickel(II) complexes, [Ni(2)L(2)(NO(2))(2)]·CH(2)Cl(2)·C(2)H(5)OH, 2H(2)O (1), [Ni(2)L(2)(DMF)(2)(μ-NO(2))]ClO(4)·DMF (2a), [Ni(2)L(2)(DMF)(2)(μ-NO(2))]ClO(4) (2b) and [Ni(3)L'(2)(μ(3)-NO(2))(2)(CH(2)Cl(2))](n)·1.5H(2)O (3) where HL = 2-[(3-amino-propylimino)-methyl]-phenol, H(2)L(') = 2-({3-[(2-hydroxy-benzylidene)-amino]-propylimino}-methyl)-phenol and DMF = N,N-dimethylformamide, have been synthesized starting with the precursor complex [NiL(2)]·2H(2)O, nickel(ii) perchlorate and sodium nitrite and characterized structurally and magnetically. The structural analyses reveal that in all the complexes, Ni(II) ions possess a distorted octahedral geometry. Complex 1 is a dinuclear di-μ(2)-phenoxo bridged species in which nitrite ion acts as chelating co-ligand. Complexes 2a and 2b also consist of dinuclear entities, but in these two compounds a cis-(μ-nitrito-1κO:2κN) bridge is present in addition to the di-μ(2)-phenoxo bridge. The molecular structures of 2a and 2b are equivalent; they differ only in that 2a contains an additional solvated DMF molecule. Complex 3 is formed by ligand rearrangement and is a one-dimensional polymer in which double phenoxo as well as μ-nitrito-1κO:2κN bridged trinuclear units are linked through a very rare μ(3)-nitrito-1κO:2κN:3κO' bridge. Analysis of variable-temperature magnetic susceptibility data indicates that there is a global weak antiferromagnetic interaction between the nickel(ii) ions in four complexes, with exchange parameters J of -5.26, -11.45, -10.66 and -5.99 cm(-1) for 1, 2a, 2b and 3, respectively.     

Experimental and theoretical investigations of the redox behavior of the heterodichalcogenido ligands [(EP(i)Pr2)(TeP(i)Pr2)N](-) (E = S, Se): cyclic cations and acyclic dichalcogenide dimers

The two-electron oxidation of the lithium salts of the heterodichalcogenidoimidodiphosphinate anions [(EP (i)Pr 2)(TeP (i)Pr 2)N] (-) ( 1a, E = S; 1b, E = Se) with iodine yields cyclic cations [(EP (i)Pr 2)(TeP (i)Pr 2)N] (+) as their iodide salts [(SP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2a) and [(SeP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2b). The five-membered rings in 2a and 2b both display an elongated E-Te bond as a consequence of an interaction between tellurium and the iodide anion. One-electron reduction of 2a and 2b with cobaltocene produces the neutral dimers (EP (i)Pr 2NP (i)Pr 2Te-) 2 ( 3a, E = S; 3b, E = Se), which are connected exclusively through a Te-Te bond. Two-electron reduction of 2a and 2b with 2 equiv of cobaltocene regenerates the corresponding dichalcogenidoimidodiphosphinate anions as ion-separated cobaltocenium salts Cp 2Co[(EP (i)Pr 2)(TeP (i)Pr 2)N] ( 4a, E = S; 4b, E = Se). The ditellurido analogue Cp 2Co[(TeP (i)Pr 2) 2N] ( 4c) has been prepared in the same manner for comparison. Density functional theory calculations reveal that the preferential interaction of the iodide anion with tellurium is determined by the polarization of the lowest unoccupied molecular orbital [sigma*(E-Te)] of the cations in 2a and 2b toward tellurium and that the formation of the dimers 3a and 3b with a central Te-Te linkage is energetically more favorable than the structural isomers with either E-Te or E-E bonds. Compounds 2a, 2b, 3a, 3b, 4a, 4b, and 4c have been characterized in solution by multinuclear NMR spectroscopy and in the solid state by X-ray crystallography.     

Controlled assembly of ruthenium complexes through ortho-carborane dithiolate and polysulfide ligands

Treatment of ortho-carborane, n-butyl lithium, sulfur, and [(p-cymene)RuCl(2)](2) in varying ratio led to four new compounds (p-cymene)Ru[S(3)(C(2)B(10)H(10))(2)] (3), [(p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10))](2) (4), [(p-cymene)Ru](2)Ru(μ(2)-η(2):η(2)-S(2)) (μ(2)-η(2):η(1)-S(2)Cl)(μ(2)-S(2)C(2)B(10)H(10))(2) (5), and [(p-cymene)Ru](2)Ru(μ(2)-η(1):η(1)-S(2))(μ(3)-η(2):η(2)-S(4)) (μ(2)-S(2)C(2)B(10)H(10))(2) (6), respectively. In 3, the ruthenium atom is coordinated by three S atoms from a in situ generated tridentate [S(3)(C(2)B(10)H(10))(2)](2-) ligand. 4 consists of two identical dinuclear (p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10)) subunits which connect to each other via the Ru-Ru bond and two bridging o-carborane-1,2-dithiolate ligands. In 4, a Ru-B bond is present. 5 contains a Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(2)-S(2)Cl) core, and the central ruthenium atom is coordinated by seven S atoms in a distorted pentagonal bipyramidal geometry. In 5, a S-Cl bond is generated. 6 has a novel Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(3)-S(4)) core, and the three ruthenium atoms are connected through the two terminal sulfur atoms of the S-S-S-S chain in a μ(3) binding fashion. All the four complexes have been characterized by elemental analysis, mass, NMR, and X-ray crystallography.     

Acidities of platinum(II) mu-hydroxo complexes bearing diphosphine ligands

The pK(a) values in DMSO of the monoprotic complexes [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) (4) (L(2) = Ph(2)PCH(2)CH(2)PPh(2) (dppe), Ph(2)PCMe(2)PPh(2) (dppip)) are 11.9 +/- 0.1 (L(2) = dppe) and 13.5 +/- 0.2 (L(2) = dppip) as determined by (31)P NMR equilibrium titration with bases of known pK(a). Complexes 4 were prepared by treatment of [L(2)Pt(mu-OH)](2)(2+) (1) with N-methylaniline. The oxo complexes [(L(2)Pt)(2)(mu-O)(mu-NMePh)](+), formed in the equilibrium titration reactions, were independently synthesized in THF by deprotonation of [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) with NaN(SiMe(3))(2) and characterized as NaBF(4) adducts. Similar experiments with diprotic [L(2)Pt(mu-OH)](2)(2+) (L(2) = dppe, Ph(2)PCH(2)CH(2)CH(2)PPh(2) (dppp)) were complicated by exchange processes and were less conclusive, giving pK(a1) < 18 and pK(a2) > 18 in DMSO.     

Palladium-catalyzed coupling of allenylphosphonates, phenylallenes, and allenyl esters: remarkable salt effect and routes to novel benzofurans and isocoumarins

Coupling reactions of allenylphosphonates (OCH(2)CMe(2)CH(2)O)P(O)CH=C=CRR' [R, R' = H (1a), R = H, R' = Me (1b), R = R' = Me (1c)] with aryl iodides, iodophenol, and iodobenzoic acid in the presence of palladium(II) acetate are investigated and compared with those of phenylallenes PhCH=C=CR2 [R = H (2a), Me (2b)] and allenyl esters EtO(2)CCH=C=CR(2) [R = H (2c), Me (2d)]. While 1b and 1c couple with different stereochemical outcomes using PhI in the presence of Pd(OAc)(2)/PPh(3)/K(2)CO(3) to give phenyl-substituted 1,3-butadienes, 1a does not undergo coupling but isomerizes to the acetylene (OCH(2)CMe(2)CH(2)O)P(O)CCMe (7). In the reaction of 1c with PhI, use of K(2)CO(3) affords the butadiene (Z)-(OCH(2)CMe(2)CH(2)O)P(O)CH=C(Ph)-C(Me)=CH(2) (12); in contrast, the use of Ag(2)CO(3) leads to the allene (OCH(2)CMe(2)CH(2)O)P(O)C(Ph)=C=CMe(2) (20), showing that these bases differ very significantly in their roles. The reaction of 1a with PhI or PhB(OH)2 in (t)he presence of Pd(OAc)2/CsF/DMF leads mainly to (E)-(OCH(2)CMe(2)CH(2)O)P(O)CH=C(Me)Ph (21) and (OCH(2)CMe(2)CH(2)O)P(O)CH2-C(Ph)=CH(2) (22) and is thus a net 1,2-addition of Ph-H. Compound 1b reacts with iodophenol in the presence of Pd(OAc)(2)/PPh(3)/K(2)CO(3) to give a benzofuran that has a structure different from that obtained by using 1c under similar conditions. Treatment of 1a with iodophenol/Pd(OAc)(2)/CsF/DMF also gives a benzofuran whose structure is different from that obtained by using 2a under similar conditions. In the reaction with 2-iodobenzoic acid, 1a and 2c afford one type of isocoumarin, while 1b,c and 2a,b give a second type of isocoumarin. The structures of key compounds are established by X-ray crystallography. Utility of the phosphonate products in the Horner-Wadsworth-Emmons reaction is demonstrated.     

High-pressure synthesis, crystal structure, and properties of BiPd2O4 with Pd2+ and Pd4+ ordering and PbPd2O4

BiPd(2)O(4) and PbPd(2)O(4) were synthesized at high pressure of 6 GPa and 1500 K. Crystal structures of BiPd(2)O(4) and PbPd(2)O(4) were studied with synchrotron X-ray powder diffraction. BiPd(2)O(4) is isostructural with PbPt(2)O(4) and crystallizes in a triclinic system (space group P1, a = 5.73632(4) ?, b = 6.02532(5) ?, c = 6.41100(5) ?, α = 114.371(1)°, β = 95.910(1)°, and γ = 111.540(1)° at 293 K). PbPd(2)O(4) is isostructural with LaPd(2)O(4) and BaAu(2)O(4) and crystallizes in a tetragonal system (space group I4(1)/a, a = 5.76232(1) ?, and c = 9.98347(2) ? at 293 K). BiPd(2)O(4) shows ordering of Pd(2+) and Pd(4+) ions, and it is the third example of compounds with ordered arrangements of Pd(2+) and Pd(4+) in addition to Ba(2)Hg(3)Pd(7)O(14) and KPd(2)O(3). In PbPd(2)O(4), the following charge distribution is realized Pb(4+)Pd(2+)(2)O(4). PbPd(2)O(4) shows a structural phase transition from I4(1)/a to I2/a at about 240 K keeping basically the same structural arrangements (space group I2/a, a = 5.77326(1) ?, b = 9.95633(2) ?, c = 5.73264(1) ?, β = 90.2185(2)° at 112 K). BiPd(2)O(4) is nonmagnetic while PbPd(2)O(4) exhibits a significant temperature-dependent paramagnetic moment of 0.46μ(B)/f.u. between 2 and 350 K. PbPd(2)O(4) shows metallic conductivity, and BiPd(2)O(4) is a semiconductor between 2 and 400 K.     

Flexible N,N,N-chelates as supports for iron and cobalt chloride complexes; synthesis, structures, DFT calculations and ethylene oligomerisation studies

The aryl-substituted N-picolylethylenediamine and diethylenetriamine ligands, (ArNHCH(2)CH(2))[(2-C(5)H(4)N)CH(2)]NH and (ArNHCH(2)CH(2))(2)NH (Ar = 2,6-Me(2)C(6)H(3), 2,4,6-Me(3)C(6)H(2)), have been prepared by employing palladium-catalysed N-C(aryl) coupling reactions of the corresponding primary amines with aryl bromide. Treatment of MCl(2) with (ArNHCH(2)CH(2))[(2-C(5)H(4)N)CH(2)]NH affords [[(ArNHCH(2)CH(2))((2-C(5)H(4)N)CH(2))NH]CoCl(2)](Ar = 2,6-Me(2)C(6)H(3) 1a; 2,4,6-Me(3)C(6)H(2)) 1b and [[(ArNHCH(2)CH(2))((2-C(5)H(4)N)CH(2))NH]FeCl(2)](n)(n= 1, Ar = 2,6-Me(2)C(6)H(3) 2a; n= 2, 2,4,6-Me(3)C(6)H(2) 2b) in high yield. The X-ray structures of 1a and 1b are isostructural and reveal the metal centres to adopt distorted trigonal bipyramidal geometries with the N,N,N-chelates adopting fac-structures. A facial coordination mode of the ligand is also observed in bimetallic 2b, however, in 2a the N,N,N-chelate adopts a mer-configuration with the metal centre adopting a geometry best described as square pyramidal. Solution studies indicate that mer-fac isomerisation is a facile process for these systems at room temperature. Quantum mechanical calculations (DFT) have been performed on 1a and 2a, in which the ligands employed are identical, and show the fac- to be marginally more stable than the mer-configuration for cobalt (1a) while for iron (2a) the converse is evident. Reaction of (ArNHCH(2)CH(2))(2)NH with CoCl(2) gave the five-coordinate complexes [[(ArNHCH(2)CH(2))(2)NH]CoCl(2)](Ar = 2,6-Me(2)C(6)H(3) 3a, 2,4,6-Me(3)C(6)H(2) 3b), in which the ligand adopts a mer-configuration; no reaction occurred with FeCl(2). All complexes 1-3 act as modest ethylene oligomerisation catalysts on activation with excess methylaluminoxane (MAO); the iron systems giving linear alpha-olefins while the cobalt systems give mixtures of linear and branched products.