Stark Effect Dependence on Hydrogenic Impurities in GaAs Parabolic Quantum-Well Wires

The ground-state and lowest excited-state binding energies of a hydrogenic impurity in GaAs parabolic quantum-well wires （Q WWs） subjected to external electric and magnetic fields are investigated using the finite-difference method within the quasi-one-dimensional effective potential model. We define an effective radius Pen of a cylindrical QWW, which can describe the strength of the lateral confinement. For the ground state, the position of the largest probability density of electron in x-y plane is located at a point, while for the lowest excited state, is located on a circularity whose radius is Pen. The point and circularity are pushed along the left haft of the center axis of the quantum-well wire by the electric field dire ted along the right half. When an impurity is located at the point or within the circularity, the ground-state or lowest excited-state binding energies are the largest; when the impurity is apart from the point or circularity, the ground-state or lowest excited-state binding energies start to decrease.     

η-nucleus bound states in nuclei

The binding energies εη and widths Гη of wmesic nuclei are calculated. We parameterize the η self-energy in the nuclear medium as a function of energy and density. We find that the single-particle energies are sensitive to the scattering length, and increase monotonically with the nucleus. The key point for the study of η-nucleus bound states is the η-nuclear optical potential. We study the s-wave interactions of η mesons in a nuclear medium and obtain the optical potential Uη ≈ -72 MeV. Comparing our results with the previous results, we find that the ηN scattering length aηN is indeed important to the calculations. With increasing nuclear density the effective mass of the η meson decreases.     

Shallow Donor Impurity Ground State in a GaAs/AlAs Spherical Quantum Dot within an Electric Field

Using the configuration-integration methods （CI） [Phys. Rev. B 45 （1992） 19], we report the results of the Hydrogenie-impurity ground state in a GaAs/AIAs spherical quantum dot under an electric field. We discuss the variations of the binding energies of the Hydrogenic-impurity ground state as a function of the position of impurity D, the radius R of the quantum dot, and also as a function of electric field F. We find that the ground energy and binding energy of impurity placed anywhere depend strongly on the position of impurity. Also, electric field can largely change the Hydrogenic-impurity ground state only limiting to the big radius of quantum dot. And the differences in energy level and binding energy are observed from the center donor and off-center donor.     

Formation Mechanism and Binding Energy for Body-Centred Regular Icosahedral Structure of Li13 Cluster

The formation mechanism for the body-centred regular icosahedral structure of Li13 cluster is proposed. The curve of the total energy versus the separation R between the nucleus at the centre and nuclei at the apexes for this structure of Li13 has been calculated by using the method of Gou＇s modified arrangement channel quantum mechanics （MACQM）. The result shows that the curve has a minimal energy of-96.951 39 a.u. at R = 5.46ao. When R approaches to infinity, the total energy of thirteen lithium atoms has the value of-96.564 38 a.u. So the binding energy of Lii3 with respect to thirteen lithium atoms is 0.387 01 a.u. Therefore the binding energy per atom for Lii3 is 0.029 77 a.u. or 0.810 eV, which is greater than the binding energy per atom of 0.453 eV for Li2, 0.494 eV for Li3, 0.7878 eV for Li4. 0.632 eV for Lis, and 0.674 eV for Liv calculated by us previously. This means that the Li13 cluster may be formed stably in a body-centred regular icosahedral structure with a greater binding energy.     

Formation Mechanism and Binding Energy for Regular Octahedral Structure of Li6 Cluster

The formation mechanism for the regular octahedral structure of Liscluster is proposed. The curve of the total energy versus the separation R between any two neighboring nuclei has been calculated by using the method of Gou＇s modified arrangement channel quantum mechanics （MACQM）. The result shows that the curve has a minimal energy of -44.736 89 a.u. at R = 5.07a0. When R approaches infinity, the total energy of six lithium atoms has the value of -44.568 17 a.u. So the binding energy of Li6 with respect to six lithium atoms is 0.1687 a.u. Therefore, the binding energy per atom for Li6 is 0.028 12 a.u., or 0.7637 eV, which is greater than the binding energy per atom of 0.453 eV for Li2 and the binding energy per atom of 0.494 eV for Li3 calculated in our previous work. This means that the Li6 cluster may be formed in a regular octahedral structure with a greater binding energy.     

Ground State Properties of Superheavy Nuclei in Macroscopic-Microscopic Model

The ground state properties of superheavy nuclei are systematically calculated by the macroscopic- microscopic （MM） model with the Nilsson potential. The calculations well produced the ground state binding energies, α-decay energies, and half lives of superheavy nuclei. The calculated results are systematically compared with available experimental data. The calculated results are also compared with theoretical results from other MM models and from relativistic mean-field model. The calculations and comparisons show that the MM model is reliable in superheavy region and that the MM model results are not very sensitive to the choice of microscopic single-particle potential.     

Properties and structure of N=Z nuclei within relativistic mean field theory

The axially deformed relativistic mean field theory with the force NLSH has been performed in the blocked BCS approximation to investigate the properties and structure of N=Z nuclei from Z=20 to Z=48. Some ground state quantities such as binding energies, quadrupole deformations, one/two-nucleon separation energies, root-mean-square （rms） radii of charge and neutron, and shell gaps have been calculated. The results suggest that large deformations can be found in medium-heavy nuclei with N=Z=38-42. The charge and neutron rms radii increase rapidly beyond the magic number N=Z=28 until Z=42 with increasing nucleon number, which is similar to isotope shift, yet beyond Z=42, they decrease dramatically as the structure changes greatly from Z=42 to Z=43. The evolution of shell gaps with proton number Z can be clearly observed. Besides the appearance of possible new shell closures, some conventional shell closures have been found to disappear in some region. In addition, we found that the Coulomb interaction is not strong enough to breakdown the shell structure of protons in the current region.     

Structures and Stability of Metal Amidoboranes （MAB）： Density Functional Calculations

Molecule geometry structures, frequencies, and energetic stabilities of ammonia borane （AB, NH3BH3 ） and metal amidoboranes （MAB, MNH2BH3）, formed by substituting H atom in AB with one of main group metal atoms, have been investigated by density-functional theory and optimized at the B3LYP levels with 6-311G＋＋ （3dr, 3pd） basic set. Their structural parameters and infrared spectrum characteristic peaks have been predicted, which should be the criterion of a successfully synthesized material. Several parameters such as binding energies, vibrational frequencies, and the energy gaps between the HOMO and the LUMO have been adopted to characterize and evaluate their structure stabilities. It is also found that the binding energies and HOMO-LUMO energy gaps of the MAB obviously change with the substitution of the atoms. MgAB has the lowest binding energy and is easier to decompose than any other substitutional structures under same conditions, while CaAB has the highest chemical activity.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Effects of hydrogen bonds on solid state TATB,RDX,and DATB under high pressures

To probe the behavior of hydrogen bonds in solid energetic materials, we conduct ReaxFF and SCC-DFTB molecular dynamics simulations of crystalline TATB, RDX, and DATB. By comparing the intra- and inter-molecular hydrogen bond- ing rates, we find that the crystal structures are stabilized by inter-molecular hydrogen bond networks. Under high-pressure, the inter- and intra-molecular hydrogen bonds in solid TATB and DATB are nearly equivalent. The hydrogen bonds in solid TATB and DATB are much shorter than in solid RDX, which suggests strong hydrogen bond interactions existing in these energetic materials. Stretching of the C-H bond is observed in solid RDX, which may lead to further decomposition and even detonation.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

D^0D^0 mixing and other recent charm results from BABAR

Studies in which BABAR data have shown evidence for mixing in the neutral charm meson system are presented. A new measurement of the lifetime difference parameter ycp = （1.16±0.22±0.18）% is described. Results are also presented from a systematic study of DK and D＊K invariant mass distributions from a 470 fb^-1 sample of asymmetric e^＋e^- interactions recorded by the BABAR detector at the PEP-Ⅱ storage rings. A new charmed-strange meson has been observed with mass [3044 ± 8stat （-5^＋30 ）syst] MeV/c^2 and width [239± 35stat （-42^＋46）syst]MeV/c^2.