等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

新工科背景下分析化学中质量保证和质量控制的教学改革探究*

通过对目前分析化学教学中存在问题的分析,探究了新工科背景下分析化学专业中关于质量保证和质量控制方面的教学改革,提出了增设“分析化学中的质量保证和质量控制”或者类似的课程的建议,指出分析化学的教学应该围绕整个分析过程展开,并将分析化学中的质量保证和质量控制知识融入分析全过程中,注重理论课程与实践课程相互结合的同时更加强调应用性,增强学生的实践能力和分析问题、解决问题的能力。此外,分析化学教学重在“分析”,要与分析实验室/检测机构保持紧密联系,应建立以市场为导向、以技术为核心的教学活动,从而实现为社会不断培养与时俱进的分析人才的教育目标。     

有机合成化学"三位一体"混合教学模式探索与实践

In order to improve the quality of teaching and cultivate chemical innovation talents in university for nationalities, in the course of organic synthetic chemistry curriculum construction, efforts were made to overcome problems such as the single teaching objective, abstract and boring teaching content, tedious and relatively dull teaching methods and low enthusiasm for students' learning, etc. According to the study rule of "before class-on class-after class", the trinity mixed teaching mode of "teaching goal-teaching means-practice examination" was constructed. Through the construction of the "teaching goal-teaching means-innovative practice" trinity mixed teaching mode, we refined teaching objectives, optimized teaching methods, implemented small classes, improved assessment methods, designed comprehensive laboratory programs, reinforced practices, and reformed the assessment measures. Discussion on teaching reform and practice of organic synthetic chemistry was carried out from multiple perspectives. Through the practice of teaching reform, the teaching effect has been improved, the enthusiasm of students to learn organic synthetic chemistry has been improved, and the expected effect of cultivating students' innovative ability has been achieved.     

仪器分析实验课程对拔尖人才培养的探讨与思考

This paper elaborates how to practice the diversified teaching in "top class" of Instrumental analysis laboratory course at Xiamen University. Instrumental analysis laboratory uses the network teaching platform to achieve the communication between teachers and students in time and space, to strengthen the exploratory and innovative thinking experience through the expansibility experiments. This paper also discusses some problems in the training of top talents.     

新型能力框架下高等分析化学研究生课程的构建

课程是实现教育目标的主要载体。本研究根据材料化学类研究生的需要,以"高等分析化学"课程为研究对象,采用"教学研、立体化"的课程教学理念,构建了"探究式"教学方法。在课堂教学中采用以问题导入为驱动、科研探究和知识传授为基础、第一课堂和第二课堂相结合的能力框架体系。通过几年的实践,该体系日臻完善,效果良好,充分实现了教与学的完美统一,为材料化学类研究生的科研能力培养打下良好基础,有利于将当代研究生培养成为既掌握理论知识又具有实践能力的综合型人才。     

我在“化学拔尖计划”有机化学课堂教学上的三项小尝试

The goal of the Ministry of Education's "Top Talent Training Program" is to train top innovative talents for China and prepare them to be the leading figures in the field of chemical research. This paper summarizes the author's three attempts to reform organic chemistry teaching in the "Top Talent Training Program"; including (1) to present the report of the minireview of organic chemistry as a true academic report; (2) to stimulate students' interest by practical comprehensive structural determination of organic compounds; (3) to create more active learning atmosphere through displaying interesting research stories and new research directions. We also discussed how to stimulate the students' interest in scientific research through these three teaching reforms.     

新时代背景下省属高校本科生毕业实习-毕业论文-就业一体化教学模式探索与实践

Based on the questionnaire surveys from 306 undergraduates in 11 classes of chemistry major in the last three years, and the exploration and experience of practical teaching for chemistry major at Qingdao University of Science and Technology, a new integrating teaching model of graduation practice, graduation thesis and employment for chemistry major was constructed. The undergraduates can finish the graduation practice and thesis work in the enterprise, and those who perform well can be employed in the enterprise. The elective courses related to the enterprise are set up in the programme of talent cultivation. The double-position teachers in the construction of the teaching staff and the double supervisor in the practical teaching are explored. Through the deep enterprise-university cooperation, the highly skilled and innovative talents needed by society are cultivated, and the employment rate and the stability of employment are increased.     

培养应用型人才下的高分子化学实验教学改革探讨

高分子实验教学是培养高分子应用型人才重要的实践教学环节。针对应用型人才的培养,根据该校的实验情况,对高分子化学实验教学的改革进行了初步探讨。     

基于微课的翻转课堂教学模式在分析化学实验教学中的探索

分析化学实验是大学化学实验的重要内容,是分析化学课程学习中不可缺少的组成部分。为了提高分析化学实验教学质量,提升学生动手能力、分析问题和解决问题的能力以及创新能力,解决传统教学模式存在的主要问题,对分析化学实验教学模式进行了改革探索。将以微课为基础的翻转课堂教学模式引入到分析化学实验中,激发学生的实验热情,提高学生综合实验技能,巩固基础理论知识,培养了科学研究思维,真正实现创新性人才培养目标。     

浅谈理论与实际相结合的原则在分析化学教学中的运用

理论与实际相结合是教学工作中必须坚持的一项基本原则,在分析化学教学中,结合学生的专业特点对教学内容进行合理的规划,将教学内容与日常生活、生产实践、新闻事件及学科发展相结合,努力激发学生的学习兴趣,增强教学内容的实用性、时代感和历史感,让学生在掌握分析化学基础知识、基本理论的同时,提高分析、解决问题的能力,也为提高科学素养和创新能力打下良好的基础。     

基于化学的“化学测量学与技术”新工科专业建设建议

The background of the establishment of "chemistry metrology and technology" as an emerging engineering education major based on chemistry is analyzed. Based on the national development strategy, aiming at the urgent demand of interdisciplinary talents for the rapid development of chemistry metrology and technology, the necessity of setting up the major of "chemistry metrology and technology" based on chemistry is demonstrated. Based on the investigation of professional talents in instrument development enterprises and application fields, some suggestions on the program of "chemistry metrology and technology" major including orientation, objectives, graduation requirements and professional training are provided. Some requirements of the curriculum, teaching staff and teaching conditions are put forward.