等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

大一学生化学实验室安全基础知识调查研究*

为考察大一学生化学实验室安全基础知识,对天津理工大学化学化工学院大一学生警示标识、危险化学品性质、废弃物处理及意外处置等安全知识进行问卷调查。结果表明:60.4%的学生将易燃标识与氧化剂标识混淆;在危险化学品性质和酸/碱撒漏处理方面有待加强。基于以上结果,在后续安全教育过程中,普及GHS标识及MSDS,对相关知识进行针对性的查漏补缺;充分利用线上资源,弥补线下教育因时间有限、容量有限导致的不足。     

以标准为风向标的化学与生活课程教学设计

公共选修课是高等教育课程体系的重要组成部分,在大学生综合素质的教育和培养方面发挥着重要作用。化学与生活是面对非化学专业开设的一门公共选修课程,其主要内容包括与衣、食、住、行等相关的化学知识。本文将国家标准应用于化学与生活课程的教学设计中,以标准为载体设计教学情境,引导学生了解国家标准中的相关规定,掌握使用标准文件分析问题的方法。促使学生客观地认识化学学科,了解化学学科在生活中的作用,规避化学产生的危害,培养学生的科学素养,使学生学会利用化学知识改善自己的生活,提高生活质量。     

化学实验室安全教育实效研究*——以大二学生为例

为考察化学实验室安全教育实效,本文对天津理工大学化学化工学院大二学生的实验室焦虑、安全态度、安全意识以及安全知识进行问卷调查。调查结果表明:实验室焦虑存在性别差异,女生焦虑情绪比男生严重;参加过安全教育培训学生比未参加安全培训学生安全态度更为端正。回归分析表明:实验室焦虑、安全态度和安全知识都与安全意图显著正相关。基于统计分析结果,提出以下安全培训提升策略:关注学生心理安全,加强情绪疏导,克服实验室焦虑;优化安全教育模式,发挥学生主观能动性,提高安全教育实效。最后,安全教育也是立德树人的过程,通过安全教育,将学生培养成为敬畏生命、敬畏责任、敬畏规章、具有正确安全道德价值观的化工行业从业人员。     

一种含氢燃料火焰降温观色筒的设计和应用*

针对酒精灯火焰呈黄色的解释争议进行研究,以降低环境温度和减少氧气浓度为方向,设计了可观察环境温度变化对含氢燃料火焰颜色影响的仪器。对乙醇、丁烷、蜡烛等燃烧火焰进行降温测试,发现含氢燃料正常燃烧火焰颜色一般为黄色、降低环境温度后变为极淡的蓝色(光亮条件下)的规律,证明了燃烧过程中水分子处于激发态是导致火焰颜色由蓝色变为黄色的重要原因,钠元素的焰色反应不是酒精灯火焰呈黄色的唯一原因。对丁烷喷枪火焰颜色的降温测试,意外观察到4种疑似氢原子光谱的可见光谱线,为今后寻找该谱线提供了可借鉴的方向。研究过程可作为基于真实情境的研究素材,通过问题的发现、仪器的改进和规律的总结,提高学生运用化学知识解决真实问题的能力,培养学生的核心素养。     

介绍一个典型的安全教育实验

安全教育在高校实验教学中占有重要地位,国内很多高校开设了形式多样的安全教育课程,但多以文字形式为主,对学生而言相对枯燥,记忆不深刻,效果有限。为有效提高学生安全防范意识和能力,我们结合化学安全教育的特点,利用已有的物理化学实验,设计了一个立体化的典型安全教育实验,使之能适用于广泛的用途。     

智能手机色度分析测定甲基紫与氢氧化钠反应速率常数

化学反应速率是反应动力学最基本的一个概念,化学反应速率常数的测定是基础化学实验中的必做实验。但该实验存在着试剂消耗量大等诸多缺点。本次实践活动从绿色化学理念出发,提出了通过将色彩理论与化学知识结合进行反应速率的测定,以达到节省实验所用试剂、提高学生对实验的兴趣等目的。首先调研了解学生对经典动力学实验的看法和利用智能手机进行化学实验的接受度,并在理论上对该方法的可行性进行了分析,再根据录制的甲基紫与NaOH反应的视频,通过色度分析获得了浓度随时间变化的曲线,由此测定了该反应的反应速率常数。该方法结合了互补光色理论、物质吸光定律等知识,只需利用智能手机和取色软件就可以开展动力学实验。     

BODIPY基荧光探针的合成、表征及对铜离子的检测——推荐一个大学综合化学实验

介绍了一个大学综合化学实验——BODIPY基荧光探针的合成、表征及对铜离子的检测。该实验是一个科研转化的大学生综合化学实验,内容包括3,5-二氯BODIY的合成、BODIPY基荧光探针分子的合成,以及利用紫外-可见分光光度计和荧光光谱仪检测目标分子对金属离子的响应性。通过本实验,使学生了解BODIPY基荧光传感器这一科研前沿领域,激发学生对科学研究的兴趣,培养学生的科研探究能力。本实验综合了有机化学、仪器分析和应用波谱学知识点的学习,培养学生的实验操作技能,提升学生的综合及创新能力,建议纳入高年级综合化学实验课程。     

Explosion hazards of ion exchange resin mixed with perchloric acid

On January 21, 2003, an explosion occurred while ion exchange resin (IER) was being used to separate impurities from uranium solution. To clarify the cause of the accident and go/no-go criteria of the explosion, elemental analysis of the IER, DSC analysis, and SIKAREX analysis (a screening tool for runaway reactions) were performed. Finally, experiments on the same scale as the accident were conducted in an explosion chamber. When HClO₄ was added to IER-NO₃, the IER violently exploded without any heating nor metal ions such as uranium. It was confirmed that the accident was caused by an incorrect procedure in the chemical process. From the standpoint of explosion safety, IER-NO₃ in particular should be kept away from perchloric acid in the laboratory.     

一种近红外荧光探针的合成、表征及应用

合成了一种卟啉类小分子荧光探针5,10,15,20-四对羟苯基卟啉(THPP)并对其结构进行表征.通过荧光光谱法,可以分别定性、定量检测铜离子(Cu2+)、焦磷酸根(PPi)及碱性磷酸酶(ALP).研究结果可以转化为一个代表性综合实验,激发学生对科学研究的极大兴趣,培养学生利用综合知识的能力.实验囊括了有机化学、分析化学、生物化学及无机化学等多个学科的多个知识点及多种重要的仪器操作技术,有助于学生综合实验能力的提升.     

使用程序升温还原方法认识无机化合物的氧化还原行为——面向拔尖计划学生的综合实验

元素化学是无机化学教学的重要组成部分。通过实验的方法研究元素及其无机化合物的性质和反应规律,可以使传统的描述性教学成为易于形象理解和深入掌握的立体化教学。本实验包含简单无机化合物的合成制备以及运用程序升温还原技术(TPR)考查所制备的材料的氧化还原性质两部分内容。程序升温还原方法可以非常直观地反映出样品的还原过程,并可以给出样品还原能力强弱(峰的位置,用于定性考查)、还原物种种类和数目(峰的数目、强弱,用于定量考查),以及各组分之间的相互作用的信息。程序升温还原技术操作简便、易实行,可在高校化学实验教学中推广使用。