三条路并的极值能量及一类图的能量排序

拟序是图能量排序中一种有效方法,基于该方法,已经得到了大量图类的极值能量排序的结果.Gutman给出了点数和为n的两条路的并的能量排序,而三条路的并的能量排序没有一个理想的结论.本文利用拟序法给出点数和为n的三条路的并的极值能量及一类图能量的排序.     

循环图能量的一个上界

本文讨论循环图的能量,得到循环图能量上界的一个估计值.进一步得到整循环图能量的两个计算公式.     

关于可压液晶方程组的能量有界性

考察可压液晶方程组有关能量的基本性质.证明了只要初始能量有界,此系统的能量就是一个与时间无关的有界量.     

关于可压液晶方程组的能量有界性

考察可压液晶方程组有关能量的基本性质.证明了只要初始能量有界,此系统的能量就是一个与时间无关的有界量.     

Cahn-Hilliard方程的高阶保能量散逸性方法

能量散逸性是物理和力学中某些微分方程一项重要的物理特性.构造精确地保持微分方程能量散逸性的数值格式对模拟具有能量散逸性的微分方程具有重要的意义.本文利用四阶平均向量场方法和傅里叶谱方法构造了Cahn-Hilliard方程高阶保能量散逸性格式.数值结果表明高阶保能量散逸性格式能很好地模拟Cahn-Hilliard方程在不同初始条件下解的行为,并且很好地保持了Cahn-Hilliard方程的能量散逸特性.     

最小能量多重仿射紧框架的特征

引入多个加细函数生成的最小能量多重仿射框架的概念.运用矩阵理论和时频分析方法,给出对应于最小能量多重仿射框架的多重加细函数所满足的条件.得到最小能量多重仿射紧框架的特征与构造方法.对原多重加细函数和最小能量多小波仿射框架做正交变换,得到新的多重加细函数和对应的最小能量多重仿射框架.     

有向图反能量的一个注记

有向图的反能量是指有向图的反邻接矩阵的能量.本文利用有向图的运算构造出了几类有向图,它们中的每一个都满足有向图的反能量等于其底图的能量.部分回答了Adiga等人在文[The skew energy of a digraph,Linear Algebra Appl.,2010,432:1825-1835]中提出的一个公开问题.     

具有内部点耗散的Timoshenko梁的能量衰减估计

研究具有反馈控制力的Timoshenko梁的能量衰减．证明了梁的能量不是一致衰减的．当梁的能量不是一致衰减时,利用初始值的正则性和无阻尼问题的最佳正则性结果,给出了多项式衰减估计．     

一类具有Taylor阻尼的Klein-Gordon方程解的稳定性分析

研究了一类具有Taylor阻尼的Klein-Gordon方程解的稳定性.通过对松弛函数及初始值进行适当的限制,首先基于位势井理论,得到了整体解的存在性,然后构造新的能量函数,利用凸函数的性质及扰动能量方法,得到了显式的能量衰减估计.研究过程中弱化了对松弛函数的限制,同时得到了更广泛的能量衰减速率估计.     

关于能量距离的两点注记（英文）

本文讨论了能量距离的两个问题.类似Brownian协方差的讨论提出了Brownian距离的定义,并证明了Brownian距离与能量距离的一致性.给出了配对变量的能量距离的表示,并探讨了将能量距离用于配对样本同分布的检验问题时原假设下的渐近分布理论.最后通过一个简单的数值模拟说明基于能量距离的配对样本的分布差异的检验方法比传统的t检验及Wilcoxon符号秩检验更有效.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

含有批处理机的三机流水作业加工总长问题在某些情形下的强NP困难性

本文研究含有批处理机的三台机器流水作业加工总长问题在某些情形下的计算复杂性。在批处理机上同时加工的工件组成一个工件批，一个工件批的所有工件同时开始、同时结束。当批处理机的容量有限时，我们证明了下列情形为强NP困难的：第一台机器是批处理机、其余两台机器是单机；第二台机器是单机、其余两台机器是批处理机；第三台机器是批处理机、其余两台机器是单机。     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .