Block copolymers of polystyrene and poly(dimethyl siloxane). I. Synthesis and characterization

The block copolymers of the ABA type, poly(dimethyl siloxane-b-styrene-b-dimethyl siloxane), were synthesized by the anionic polymerization of styrene and cyclic siloxane monomer, hexamethyl cyclotrisiloxane (D₃) or octamethylcyclotetrasiloxane (D₄), with lithium or sodium biphenyl as initiator. The effect of initiator concentration, gegenion, and the polymerization temperature for styrene on molecular weight distribution (MWD) was investigated. Gel permeation chromatography (GPC) data show broader MWD of polystyrene prepared by sodium biphenyl in comparison to that produced by lithium biphenyl. The block copolymers have been characterized by infrared (IR) and nuclear magnetic resonance (NMR) spectra. The influence of dimethylsiloxy units on thermal stability of the copolymers has also been discussed.     

Monodisperse polystyrene particles crosslinked with poly(dimethyl siloxane) diacrylate using dispersion polymerization and their monomer swelling capability

A flexible poly(dimethyl siloxane) diacrylate (PDMSDA) crosslinker was synthesized using different molecular weights of poly(dimethyl siloxane) (PDMS, M _n =550, 1,700, 4,000 g/mol). The monodisperse polystyrene (PS) particles crosslinked with various contents of PDMSDA were prepared by dispersion polymerization, and applied as seed particles in the seeded polymerization. The crosslinking density of the PS particles was determined from the rate of transport of the monomer molecules to the crosslinked seed particles. It was confirmed that the monomer swelling capacity of seed particles and final morphological changes of polymer beads were determined significantly by the crosslinking density of the seed particles. In addition, the morphological change was not observed without the oligomer swelling step in the seeded polymerization due to the hydrophobic property of PDMS. When highly crosslinked seed particles were used in the seeded polymerization, peculiar morphology (doublet structure) of polymer beads appeared.     

Graft and block copolymers with polysiloxane and vinyl polymer segments

A convenient new process to make silicone/organic block and graft copolymers has been recently demonstrated. This dual copolymerization process combines conventional condensation polymerization of the siloxane segments with free radical polymerization of the organic vinyl polymer segments. The copolymerization process is relatively simple and economical compared with other copolymerization techniques as it uses commonly available starting materials and available process equipment. Silicone segments containing alkene side chains or end-groups are prepared in the usual way by polycondensation using an acid or base catalyst. The double bonds of the alkene groups are oxidized to carbonyls which are then used to initiate vinyl monomer polymerization and link the siloxane with the vinyl segments. This initiation step is based on a redox system of copper^(II) salts which generates free radicals on the alpha carbons next to the carbonyl groups. This copolymerization process is relatively fast and proceeds at high yields.     

Synthesis, structures and membrane properties of siloxane-imide co-polymers produced by aqueous polymerization

We report for the first time, the synthesis of siloxane-imide co-polymers by the reaction of mixtures of 1,4-bis(aminobutyl)tetramethyldisiloxane (ABTMDS) and 1,3-bis(4-aminophenoxy)benzene (TPE-R) with bisphenol A diphthalic anhydride (BPADA) using water as the polymerization solvent. A series of co-polymers were prepared incorporating 10, 20, 40 and 100 mol% of ABTMDS with the aromatic diamine TPE-R as the co-monomer. The synthesized co-polymers showed number average molecular weights in the range of 25,000–60,000. As expected the glass transition temperatures (T_gs) and moduli of the polymers were found to decrease with increasing amounts of the siloxane monomer and the homo-polymer containing only the siloxane diamine showing the lowest T_g (60 °C). The resulting polymers could be solution cast into strong and flexible membranes which showed significant decreases in water absorption and moisture permeability compared to the control polymer without siloxane groups. The polymers were characterized by FTIR, ¹³C and ¹H NMR, GPC, DSC and mechanical properties and structural comparisons were made with similar polymers made by standard solvent synthesis methods. Also cross-linked polymers were prepared by the reaction of ABTMDS with the aromatic homo-polymer control and their membrane properties were compared to those of the water synthesized siloxane co-polymers with a similar siloxane content.     

Preparation of Different Poly 3-Alkylthiophene Ultrathin Films at the Surface of Chemically Adsorbed Monolayer Having Thienyl Group

Polymerization processes of two types ultrathin films containing polythienyl groups anchored to the substrate surface through siloxane bonds were investigated. When the oxidative polymerization on the Chemically Adsorbed (CA) monolayer prepared with 11-(3-thienylundecyl)trichlorosilane (TTS) was performed in the acetonitrile solution containing 3-octylthiophene monomer and FeCl₃, the thienyl groups in the CA monolayer and the outer 3-octylthiophene monomers were polymerized each other along the directions of both in-plane and out-of-plane of the CA monolayer. On the other hand, when the oxidative polymerization was performed without the additive 3-octylthiophene monomer, the long conjugated linkage of the thienyl groups was not formed in the CA monolayer. The highest conductivity of the film prepared with the additive 3-octylthiophene of about 10 nm thickness was 10^?2 S/cm.     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Exactly alternating silarylene-siloxane polymers. III. Structure-property relationships for polymers containing p-phenylene and p,p′-diphenyl ether silarylene units

A series of 12 different exactly alternating silarylene-siloxane polymers was prepared by low temperature condensation polymerization of arylenedisilanol with bisureidosilane monomers. The structural characterization of the polymers was carried out by ¹H NMR spectroscopy, ¹³C NMR spectroscopy, infrared (IR) spectrometry, gel permeation chromatography (GPC). dilute solution viscometry, and differential scanning calorimetry (DSC). Homopolymers and copolymers that contained either or both p-phenylene and p,p′-diphenyl ether units in the silarylene group and dimethyl or methylvinyl units in the siloxane group were prepared in high molecular weights.     

Siloxane‐Based Hybrid Semiconducting Polymers Prepared by Fluoride‐Mediated Suzuki Polymerization

Siloxane‐containing materials are a large and important class of organic‐inorganic hybrids. In this report, a practical variation of the Suzuki polymerization to generate semiconducting polymeric hybrids based on siloxane units, which proceeds under essentially nonbasic conditions, is presented. This method generates solution‐processable poly(diketopyrrolopyrrole‐alt‐benzothiadiazole) (PDPPBT‐Si) consisting of the hybrid siloxane substituents, which could not be made using conventional methods. PDPPBT‐Si exhibits excellent ambipolar transistor performance with well‐balanced hole and electron FET mobilities. The siloxane‐containing DPP‐thiophene polymer classes (PDPP3T‐Si and PDPP4T‐Si), synthesized by this method, exhibit high hole mobility of up to 1.29 cm² V^?1 s^?1. This synthetic approach should provide access to a variety of novel siloxane‐containing conjugated semiconductor classes by using a variety of aryldihalides and aryldiboronic acids/esters.     

Synthesis and characterization of poly[styrene‐b‐methyl(3,3,3‐trifluoropropyl)siloxane] diblock copolymers via anionic polymerization

A series of narrow molecular weight distribution (MWD) polystyrene‐b‐poly[methyl(3,3,3‐trifluoropropyl)siloxane] (PS‐b‐PMTFPS) diblock copolymers were synthesized by the sequential anionic polymerization of styrene and trans‐1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane in tetrahydrofuran (THF) with n‐butyllithium as the initiator. The diblock copolymers had narrow MWDs ranging from 1.06 to 1.20 and number‐average molecular weights ranging from 8.2 × 10³ to 37.1 × 10³. To investigate the properties of the copolymers, diblock copolymers with different weight fractions of poly[methyl(3,3,3‐trifluoropropyl)siloxane] (15.4–78.8 wt %) were prepared. The compositions of the diblock copolymers were calculated from the characteristic proton integrals of ¹H NMR spectra. For the anionic ring‐opening polymerization (ROP) of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃) initiated by polystyryllithium, high monomer concentrations could give high polymer yields and good control of MWDs when THF was used as the polymerization solvent. It was speculated that good control of the block copolymerization under the condition of high monomer concentrations was due to the slowdown of the anionic ROP rate of F₃ and the steric hindrance of the polystyrene precursors. There was enough time to terminate the ROP of F₃ when the polymer yield was high, and good control of block copolymerization could be achieved thereafter. The thermal properties (differential scanning calorimetry and thermogravimetric analysis) were also investigated for the PS‐b‐PMTFPS diblock copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4431–4438, 2005     

Synthesis and Characterization of Base‐catalyzed Phenyl Modified PDMS/PHMS Copolymers

A series of phenyl modified polydimethylsiloxane (PDMS) / polyhydrogenmethylsiloxane (PHMS) random copolymers containing both internal Si‐H and terminal SiH₂ and T (MeSiO_3/2) units was synthesized in one step through n‐BuLi‐catalyzed ring‐opening polymerization of cyclic comonomers and characterized by GPC, IR and ¹H and ²⁹Si NMR. Sequential microstructures of these copolymers were determined by ²⁹Si‐NMR spectroscopy. Epoxy‐modified polysiloxanes were prepared and used as comparable standards for the assignment of the NMR spectra. A hydride‐transfer mechanism has been proposed to account for the formation of terminal Si‐H and T group. Detailed sequential analyses and chemical shifts of ²⁹Si‐NMR for various siloxane units are reported for the first time.     

Copolymerization behavior of direct polycondensation of AB2 and AB monomers that forms hyperbranched aromatic polyamide copolymers

The copolymerization behavior of the one‐step direct polycondensation of 3,5‐bis‐(4‐aminophenoxy)benzoic acid (AB₂ monomer) and 3‐(4‐aminophenoxy)benzoic acid (AB monomer) was investigated by IR and ¹³C NMR measurements. IR measurements revealed that the content of the AB₂ units in the polymer was higher in the early stages of polymerization. ¹³C NMR spectra of the polymers indicated that the number of dendritic units increased slowly with increasing reaction time. The stepwise copolymerization of the AB₂ and AB monomers was also carried out, and the structure was analyzed by ¹³C NMR measurements. Copolymer synthesized stepwise by adding AB₂ monomer first (polymer II ) had more dendritic units and less terminal units as compared with the one‐step copolymer (polymer I ). Copolymer synthesized stepwise by adding AB monomer first gave a resulting copolymer (polymer III ) composed of long AB chains. The solubility of the stepwise copolymers was low, and the inherent viscosity was high in comparison with the one‐step copolymer as a result of the difference in architecture of the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3304–3310, 2001     

A Green One-pot Synthesis of PDMS Bis-Macromonomers Using an Ecologic Catalyst (Maghnite-H+)

PDMS bis-macromonomers bearing methyl methacrylate end groups is a material mainly used for making extended-wear contact lenses. Silicon-based materials give a good oxygen passage and methyl methacrylate has biocompatibility and mechanical properties of the elastomer. The present study shows the synthesis of this material. The polymerization of hexamethylcyclotrisiloxane (D₃) catalyzed by Maghnite-H⁺ (Mag-H⁺), a montmorillonite sheet silicate clay exchanged with protons, an efficient catalyst for cationic polymerization of manyheterocyclic and vinylicmonomers. The structural compositions of “Maghnite” have already been determined. The effects of the amount of Mag-H⁺, temperature and the reaction time were studied. Moreover, we used a simple method, one step in solution to prepare Poly dimethyl siloxane (PDMS) and PDMS bis-macromonomers. The structure of the resulting products is characterized and established by ¹H and ¹³C-NMR, where the methacrylate end groups are clearly visible. The presence of unsaturated end group was also determined by UV and FTIR analysis. The influence of the amount of methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of PDMS macromonomers depend on the amount of methacrylic anhydride used.     

Synthesis and photopolymerization of 1-propenyl glycidyl ether

The ambifunctional monomer, 1-propenyl glycidyl ether, was prepared from allyl glycidyl ether, by a ruthenium-catalyzed isomerization reaction in high yield. 1-Propenyl glycidyl ether undergoes facile photoinduced cationic polymerization to yield a crosslinked polymer. The structure of this polymer was studied using ¹H- and, ¹³C-NMR spectroscopies and employing well-characterized related polymers as models. The model polymers were prepared by the cationic polymerization of allyl glycidyl ether with BF₃OEt₂ followed by isomerization of the pendant allyl groups by a ruthenium catalyst. Subsequently, the resulting polyether-bearing pendant 1-propenyl ether groups was subjected to a diaryliodonium salt-photoinitiated polymerization. A comparison of the spectra of the polymers indicated the presence of cyclic acetal units in the polymer backbone. © 1994 John Wiley & Sons, Inc.     

室温交联型硅丙微胶乳的合成研究(1)硅烷单体对聚合稳定性和胶膜性能的影响

采用种子微乳液聚合工艺和单体半连续滴加法合成了室温交联型有机硅改性丙烯酸酯微胶乳，研究了硅烷单体种类和用量及其添加顺序等对聚合稳定和胶膜性能的影响。结果表明，使用含阻碍性铁新硅烷单体（C－1757）可明显抑制体系中的水解－缩合反应，提高聚合稳定性，而且随其用量增加，改性胶膜的交联密度增大，拉伸强度提高；延迟添加C－1757，可进一步提高聚合稳定性，但会降低胶膜的交联密度，拉伸强度先高后低，30／70处有一个最大值，所合成的硅丙微胶乳储存期可达长两年，与C－1757相比，硅烷单体A－174改性的胶膜具有更大的交联密度，而A－171改性的胶膜交联密度偏低，力学性能较差。     

Si and Zr based NBBS for hybrid O/I macromolecular materials starting by preformed zirconium oxo-clusters

In this study surface-functionalized zirconium oxoclusters (ZrNBB), formed by reaction between vinylacetic acid and zirconium propoxide, were chemically modified through condensation with siloxane groups, so that the core integrity of ZrNBB was preserved. The direct coupling between zirconium oxo-clusters and siloxane moiety was performed by co-polymerisation with vinyl trimethoxysilane (VTMS) with Zr:Si molar ratio 1:2 in air at room temperature and benzoyl peroxide (BPO) was used as an initiator to start radical polymerization. The polymerisation was studied by differential scanning calorimetry (DSC) and Fourier Transform Infra Red (FTIR) spectroscopy. ²⁹Si and ¹³C liquid and solid state NMR analyses were performed in order to study the microstructure of the hybrid material and the role of the clusters in polymerization and condensation. Beyond this, shear storage modulus (G′) and loss modulus (G′′), were investigated by dynamical mechanical spectroscopy (DMS). The results indicated a great stability at high temperature without any viscous flow during glass transition.     

Polymers from 1,2-Disubstituted Ethylenic Monomers. IX. Radical High Polymerization of Methyl-tert-butyl Fumarate

Methyl-tert-butyl fumarate (MtBF) was found to homopolymerize in bulk in the presence of 2,2′-azobisisobutyronitrile (AIBN) at 50–80°C to give a high molecular weight polymer. From IR, ¹H-NMR and ¹³C-NMR spectra, this polymer was assumed to consist of alternating methoxycarbonylmethylene and tert-butoxycarbonylmethylene units, indicating that it was produced from MtBF through an ordinary vinylene polymerization mechanism. Consideration of a molecular model suggested that this polymer had a less flexible rodlike structure with the diameter of about 13.5 Å. The thermal properties of this polymer were also evaluated. Moreover, the bulk polymerization of MtBF initiated by AIBN was investigated kinetically at 60°C. The overall activation energy for this polymerization was determined to be 83.5 kJ/mol. The reaction orders with respect to the monomer and initiator concentrations were obtained as 2.0 and 0.33, respectively.     

Synthesis of poly(p-phenylene)s having alternating sugar and alkyl substituents by Suzuki coupling polymerization and evaluation of their main-chain conformations

This paper reports synthesis of poly(p-phenylene)s (PPPs) having alternating sugar and alkyl substituents by Suzuki coupling polymerization of a 1,4-dibromobenzene monomer having peracetylated glucose residues with a 1,4-benzene bis(boronic acid) having alkyl chains using Pd(PPh₃)₄ in a mixed solvent of THF and NaHCO₃ aq. at reflux temperature. The polymerization proceeded with the progress of frequent deacetylation, and thus, the crude product was acetylated, followed by the isolation procedures, giving the PPP having alternating peracetylated glucose and alkyl substituents. The structure of the isolated product was confirmed by the ¹H and ¹³C NMR measurements to be the desired PPP derivative. The M_n values were estimated by GPC analysis with DMF as the eluent to be 5400-12,700. The deacetylation of the polymer completely took place using sodium methoxide in methanol/THF. The conformation of the main-chain was evaluated by the CD spectrum in comparison with that of PPP only with the glucose substituents, indicating that the present PPP derivative had the flexible nature of the main-chain by introduction of the alkyl-substituted units between glucose-substituted units. The Suzuki coupling of a 1,4-dibromobenzne monomer having disaccharide substituents with the benzene bis(boronic acid) monomer was also performed under the similar conditions. The product was precipitated from the reaction mixture, which was simply isolated by filtration. The isolated polymer was purified further by reprecipitation into diethyl ether and its structure was a PPP having free disaccharide or monosaccharide residues. This indicated occurrence of complete deacetylation as well as partial degradation of the glycosidic linkages in the disaccharides during the polymerization. The main-chain of the obtained polymer had also the flexible nature. The fluorescence spectra of the obtained PPP derivatives in this study were also measured.     

Kinetics and mechanism of the anionic polymerization of cyclohexadienes initiated by naphthalene radical anions and dianions

The anionic polymerization of 1.3-cyclohexadiene (1.3-CHD) was investigated in temperatures that ranged from 25 to ?77°C. Initiation by lithium naphthalene (N^?·,Li⁺) in tetrahydrofuran at ?20°C yields polymers with fairly narrow molecular weight distribution. The M?_w of these polymers so prepared is ca. 20,000. Polymerization of 1.3-CHD conducted at room temperature is accompanied by the dehydrogenation and disproportionation of the monomer, especially when N^?·,K⁺ acts as initiator. Oligomers are formed when hexamethylphosphoramide is used as a solvent. The mechanism of the initiation of the polymerization of 1.3-CHD by N^?·,Li⁺ was elucidated and the rate constants at ?20°C in tetrahydrofuran of the elementary reactions were determined. It was established that the dianions formed by disproportionation of N^?·,Li⁺ act as effective initiators for 1.3-CHD. The adducts formed constitute the cyclohexanyl and naphthyl carbanionic groups. The former carbanions (λ_max ～ 275 nm) propagate the polymerization. The initially formed dimeric adducts are stabilized by the separation of the carbanionic end groups by the additional monomer units. Chain transfer to the monomer limits the growth of the polymers. The isomerization of the cyclohexadienyl anions, formed as result of chain transfer, may be followed by the elimination of lithium hydride. The latter reaction represents a termination step. Addition of 1.4-CHD to the reaction mixture enhances the chain transfer and the termination.     

Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”     

Cationic polymerization of 1,4,6-trioxaspiro [4,4]-nonane

Cationic polymerization of 1,4,6-trioxaspiro [4,4]-nonane ( 1 ) with (CH₃)₃O⁺SbF₆^?(2) and CH₃OSO₂CF₃(3) initiators has been investigated. Although the observed rates of initiation and propagation are relatively slow, they consist of rapid reversible elementary reactions. In ¹H-NMR spectra, a broadening of the monomer signal was observed, indicating a fast exchange between “free” monomer and monomer engaged in the active species. The variety of orthoester bonds were observed in the polymer formed at the early stages of monomer conversion. The final polymer has, however, structure of a linear poly(ester–ether) including two subsequent ester or ether linkages. To account for these new facts, the mechanism of polymerization was proposed, consisting of a rapid reversible opening of one of the rings in the monomer molecule involved in the growing species, followed by the slower opening of the second ring with formation of the ester linkages. It appears that the rings originally present in the chains rearrange into the linear units intramolecularly.