Heteroscorpionate rare-earth initiators for the controlled ring-opening polymerization of cyclic esters

A series of neutral rare-earth metal amides containing different achiral and chiral heteroscorpionate ligands was synthesized and characterized and these compounds were employed in the polymerization of cyclic esters. Thus, treatment of [Ln{N(SiHMe(2))(2)}(3)(thf)(2)] (Ln = Nd, Sm) with acetamide or thioacetamide heteroscorpionate ligands for 2 h at 0 °C afforded the α-agostic silylamido dimeric rare-earth compounds [Ln{N(SiHMe(2))(2)}(NNE)](2) (Ln = Nd and Sm; NNE = heteroscorpionate ligands, E = O, S) (1-8), some as enantiopure complexes. Complexes 1-8 contain dianionic heteroscorpionate pseudoallyl ligands resulting from C-H activation of the bridging methine group of the bis(pyrazol-1-yl)methane moiety and subsequent coordination to the metal center. However, when the reaction was carried out for 1 h at lower temperature new bis(silylamido) dimeric lanthanide compounds [Ln{N(SiHMe(2))(2)}(2)(NNE)](2) (Ln = Nd and Sm; E = O) (9 and 10) were obtained. The structures of the complexes were determined by spectroscopic methods and the X-ray crystal structures of 1, and 4 were also established. Neodymium complexes are active initiators for the ring-opening polymerization (ROP) of lactide (LA) and lactones, giving rise to medium-high molar mass polymers under mild conditions and with narrow polydispersities. These complexes were well suited for achieving well-controlled polymerization through an insertion-coordination mechanism. Achiral and racemic complexes did not affect stereocontrol in the polymerizarion of rac-LA but the enantiomerically pure complex 1 was found to exhibit a homosteric preference for one of the two enantiomers of rac-LA at low conversions.     

Controlled ring-opening polymerization of cyclic esters with phosphoric acid as catalysts

(R)-(?)-1,1′-Binaphthyl-2,2′-diyl hydrogen phosphate (BPA) has been demonstrated as an efficient organocatalyst for controlled ring-opening homopolymerization of ε-caprolactone (ε-CL) and copolymerization of ε-CL with glycolide and lactide. High molar mass PCL with narrow molar mass distribution has also been synthesized from the bulk ring-opening polymerization (ROP) of ε-CL with BPA as catalysts; the highest molar mass of PCL is 4.35?×?10⁴ g/mol with polydispersity index of 1.20. The successful synthesis of high molar mass PCL is attributed to the bifunctional activation mechanism for the ROP of ε-CL catalyzed by BPA. More interestingly, ppm level of BPA is sufficient to catalyze controlled ROP of ε-CL.     

Hindered lithium dialkylamide initiators for the living anionic polymerization of methacrylic esters

Lithium diisopropylamide is an efficient initiator for the anionic polymerization of methyl methacrylate in polar solvents at –78°C. Predictable molecular weights based on the initiator concentration were obtained, yields were quantitative, and molecular weight distributions were relatively narrow (<1.30). The presence of an amino end group and confirmation of the initiation mechanism were confirmed by potentiometric titration using HClO₄. Number-average molecular weights determined by titration agreed well with values determined by SEC. Other lithium dialkylamides that contain larger alkyl groups such as lithium diisobutylamide were less efficient initiators. This was attributed to the more nucleophilic anion due to less steric hindrance near the nitrogen atom. Molecular weight distributions were significantly broadened (>2.0), and molecular weight control was not achieved. However, polymer yields were quantitative. In all cases, PMMA stereochemistry was indicative of a solvent-separated lithium counterion, and triad compositions were identical to organolithium initiated homopolymers, i.e., 78% syndiotactic, 20% heterotactic, and 2% isotactic. © 1994 John Wiley & Sons, Inc.     

Emulsion polymerization in the presence of polymerizable emulsifiers and surface active initiators

A survey is given of recent developments in emulsion polymerization regarding improved auxiliary materials, e.g. vinyl tensides and surface active initiators. Results of the emulsion polymerization of styrene are presented with 3-(alkyloxycarbonyl-acryloyloxy)propanesulfonates ( 2 ) as polymerizable emulsifiers and with surface active azo initiators. The results show, that the content of water soluble surface active compounds in the latexes can be reduced. Investigations of the molecular weight of the polymers show the great importance of the initiator-emulsifier system. Azo initiators leading to higher molecular weights than persulfate. Under the same conditions the highest molecular weights were obtained with a surface active azo initiator.     

Quantitative comparison of selectivities in the polymerization of cyclic esters

Chain transfer processes (k_tr) taking place in the polymerization (anionic and pseudoanionic) of cyclic esters (lactones) are reviewed. These reactions are mostly responsible for the departure of these systems from the fully controlled (living) polymerizations. The ratios of k_p/k_tr have been determined for a number of initiating systems and the structures of the growing species are related to their selectivity, expressed by k_p/k_tr. It has been shown that the less reactive and more sterically crowded active species polymerize more selectively.     

Rubbery wound closure adhesives. II. initiators for and initiation of 2‐octyl cyanoacrylate polymerization

The polymerization of 2‐octyl cyanoacrylate (OctCA) initiated by five N‐bases [N,N‐dimethyl‐p‐toluidine (DMT), pyridine (Pyr), triethyl amine (Et₃N), azobicyclo[2.2.2]octane (ABCO), and diazobicylo[2.2.2]octane (DABCO)] was investigated. Our main objective was to assess the suitability and relative reactivity of these initiators for neat OctCA polymerization as wound closure adhesives. Methodologies were developed to determine stir‐stop and set times of OctCA polymerization and to use these quantities to assess initiation reactivity. According to these studies Et₃N, ABCO, DABCO, and Pyr are most reactive initiators, while DMT is much less reactive. Polymerizations were much faster in the presence of small amounts of tetrahydrofuran than toluene, indicating solvent polarity effects. Initiator reactivity is discussed in terms of structural parameters. NMR and MALDI‐TOF analyses of low molecular weight P(OctCA) prepared with DMT did not show evidence for the expected aromatic head group proposed by earlier investigators, which suggests complex initiation mechanism. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1652–1659     

Stereochemical aspects of the controlled ring-opening polymerization of chiral cyclic esters

The stereochemical aspects of controlled polymerization of lactide and β-butyrolactone are discussed. The physicochemical and thermal properties of these polymers are shown to be depending on the stereochemical structure of the macromolecular chain. Different types of processes involving change of enantiomeric composition in the course of the polymerization reaction are examined in function of different initiators used. The formation of stereocomplexes from stereocopolymers of various enantiomeric compositions is reported.     

Zn(II) and Cu(II) unsymmetrical formamidine complexes as effective initiators for ring‐opening polymerization of cyclic esters

A series of Zn(II) and Cu(II) complexes were synthesized using unsymmetrical N,N′‐ diarylformamidine ligands, i.e. N‐(2‐methoxyphenyl)‐N′‐2,6‐dichorophenyl)‐formamidine ( L1 ), N‐(2‐methoxyphenyl)‐N′‐phenyl)‐formamidine ( L2 ), N‐(2‐methoxyphenyl)‐N′‐(2,6‐dimethylphenyl)‐formamidine ( L3 ) and N‐(2‐methoxyphenyl)‐N′‐(2,6‐diisopropylphenyl)‐formamidine ( L4 ). The complexes, [Zn₂( L1 )₂(OAc)₄] ( 1) , [Zn₂( L2 )₂(OAc)₄] ( 2 ), [Zn₂( L3 )₂(OAc)₄] ( 3 ), [Zn₂( L4 )₂(OAc)₄] ( 4 ), [Cu₂( L1 )₂(OAc)₄] ( 5 ), [Cu₂( L2 )₂(OAc)₄] ( 6 ), [Cu₂( L3 )₂(OAc)₄] ( 7 ) and [Cu₂( L4 )₂(OAc)₄] ( 8 ), were prepared via a mechanochemical method with excellent yields between 95 ‐ 98% by reacting the metal acetates and corresponding ligands. Structural studies showed that both complexes are dimeric with a paddlewheel core structure in which the separation between the two metal centres are 2.9898 (8) and 2.6653 (7) Å in complexes 3 and 7 , respectively. Complexes 1 – 8 were used in ring‐opening polymerization of ε‐caprolactone (ε‐CL) and rac‐lactide (rac‐LA). Zn(II) complexes were more active than Cu(II) complexes, with complex 1 bearing electron withdrawing chloro groups being the most active (k_app = 0.0803 h^‐1). Low molecular weight poly‐(ε‐CL) and poly‐(rac‐LA) ranging from 1720 to 6042 g mol^‐1, with broad molecular weight distribution (PDIs, 1.78 – 1.87) were obtained. Complex 2 gave reaction orders of 0.56 and 1.52 with respect to ε‐CL and rac‐LA, respectively.     

Mechanism of particle formation and kinetics of the dispersion polymerization of cyclic esters

Pseudoanionic and anionic polymerizations of ε-caprolactone and lactides in 1,4-dioxane:heptane mixtures containing poly(dodecyl acrylate)-g-poly(ε-caprolactone) yield polyesters in form of microspheres. Monitoring partition of active centers between solution and microspheres revealed that particles are formed during initial period, when macromolecules reach their critical masses (ca. 1 000) and became insoluble. Then, propagation proceeds inside of microspheres into which monomer diffuses from solution. Monitoring of variation of the number of particles in a unit volume of reaction mixture with time indicated that after a primary nucleation the delayed nucleation and aggregation are absent. In effect, microspheres with narrow diameter distribution are obtained. Kinetic measurements revealed that in the dispersion pseudoanionic (initiator (CH₃CH₂)₂AlOCH₂CH₃) and anionic (initiator (CH₃)₃SiONa) polymerizations of ε-caprolactone the overall rates of monomer conversion are from 10 to 30 times higher than for the corresponding polymerizations in solution (THF solvent). Analysis of kinetic equations indicated that the observed faster monomer conversions in polymerizations in dispersed systems are due to the high local concentrations of active centers and monomer in growing microspheres.     

Controlled and stereoselective polymerization of lactide: kinetics, selectivity, and microstructures

Chiral aluminum isopropoxides based on enantiopure or racemic cyclohexylsalen ligand (Jacobsen ligand) have been prepared and employed for stereoelective/stereoselective ring-opening polymerization of lactide in toluene at 70 degrees C. The kinetics, selectivity of the catalysts, and microstructure of the obtained polylactides, using different combinations of lactide enantiomers and catalysts, were determined. In all cases, polylactides of controlled molecular weight, low polydispersity, and defined end groups were obtained. The polymerizations are first-order in both monomer(s) and catalyst. (R,R)-CyclohexylsalenAlO(i)()Pr [(R,R)-1] polymerizes l-lactide significantly faster than d-lactide with a rate constant ratio k(l)/k(d) of approximately 14. The polymerization of rac-lactide using (R,R)-1 yields crystalline polymers, for which a selectivity factor of approximately 5.5 could be calculated up to 50% conversion based on the optical purity of the isolated polymers. The polymerization of a l-lactide/d-lactide (molar ratio: 80/20) mixture by (R,R)-1 furnishes an isotactic-atactic block copolylactide, which is highly crystalline with a T(m) = approximately 155 degrees C. Polymerization of rac-lactide applying rac-cyclohexylsalenAlO(i)()Pr [rac-1] yields isotactic stereoblock polylactides with a high T(m) = approximately 185 degrees C and a high degree of crystallinity.     

Highly active and stereoselective zirconium and hafnium alkoxide initiators for solvent-free ring-opening polymerization of rac-lactide

Under solvent-free conditions (at 130 degrees C), zirconium and hafnium amine tris(phenolate) alkoxides are extremely active, well-controlled, single-site initiators for the ring-opening polymerization of rac-lactide, yielding highly heterotactic polylactide.     

Ring-opening polymerization of cyclic esters and trimethylene carbonate catalyzed by aluminum half-salen complexes

A series of ONO-tridentate Schiff base ligands derived from chiral and achiral amino alcohols and amino acids were synthesized and reacted with AlEt(3) to provide dimeric aluminum complexes. These complexes were tested for the ring-opening polymerization (ROP) of rac-lactide at 70 °C in toluene, producing poly(lactide) with up to 82% isotacticity. The most active of these aluminum complexes was chosen to perform ring-opening homopolymerizations of rac-lactide, trimethylene carbonate (TMC), rac-β-butyrolactone (rac-β-BL), δ-valerolactone (δ-VL), and ε-caprolactone (ε-CL). Kinetic parameters were investigated, and each polymerization was found to be first order with respect to monomer concentration. Fractional orders were observed with respect to catalyst concentration, indicating catalyst aggregation during the polymerization processes. Activation parameters were determined for all monomers, with their ΔG(?) values at 90 °C being in the order rac-lactide ≈ rac-β-BL > δ-VL > TMC ≈ ε-CL. Fineman-Ross and kinetic studies of the copolymerization of rac-lactide and δ-VL both indicate that the rate of rac-lactide enchainment is higher than that of δ-VL, resulting in a tapered copolymer. In addition, single crystals of one of these aluminum complexes were grown in the presence of rac-lactide and characterized using X-ray crystallography. The unit cell contains two lactide monomers, one D- and one L-lactide, adding further proof that polymerization takes place via an enantiomorphic site control mechanism.     

beta-Diketiminate aluminium complexes: synthesis, characterization and ring-opening polymerization of cyclic esters

A series of aluminium alkyl complexes (BDI)AlEt(2) (3a-m) bearing symmetrical or unsymmetrical beta-diketiminate ligand (BDI) frameworks were obtained from the reaction of triethyl aluminium and the corresponding beta-diketimine. The monomeric structure of the aluminium complex 3k was confirmed by an X-ray diffraction study, which shows that the aluminium center is coordinated by both of the nitrogen donors of the chelating diketiminate ligand and the two ethyl groups in a distorted tetrahedral geometry. Attempt to synthesize beta-diketiminate aluminium alkoxide complexes by the reactions of monochloride complex "(BDI-2a)AlMeCl" (4) with alkali salts of 2-propanol gave unexpectedly an aluminoxane [(BDI-2a)AlMe](2)(micro-O) (7) as characterized by X-ray diffraction methods. Complexes 3a-m and [(2,6-(i)Pr(2)C(6)H(3)NCMe)(2)HC]AlEt(2) (8) were found to catalyze the ring-opening polymerization (ROP) of epsilon-caprolactone with moderate activities. The steric and electronic characteristics of the ancillary ligands have a significant influence on the polymerization performance of the corresponding aluminium complexes. The introduction of electron-donating substituents at the para-positions of the aryl rings in the ligand resulted in an apparent decrease in catalytic activity. Complex 3h showed the highest activity among the investigated aluminium complexes due to the high electrophilicity of the metal center induced by the meta-trifluoromethyl substituents on the aryl rings. The increase of steric hindrance of the ligand by introducing ortho-substituents onto the phenyl moieties also resulted in a decrease in the catalytic activity. Although the viscosity average molecular weights (M(eta)) of the obtained poly(caprolactone)s increased with the enhancement of monomer conversion, the ROPs of epsilon-caprolactone initiated by complexes 3a-m and 8 were not well-controlled, as judged from the broad molecular weight distributions (PDI = 1.66-3.74, M(w)/M(n)) of the obtained polymers and the nonlinear relationship of molecular weight versus monomer conversion.     

X-ray spectroscopic and diffraction study of the structure of the active species in the Ni(II)-catalyzed polymerization of isocyanides.

The structure of the active complex in the Ni-catalyzed polymerization of isocyanides to give polyisocyanides is investigated. It is shown by X-ray absorption spectroscopy (XAS), including EXAFS (extended X-ray absorption fine structure) and XANES (X-ray absorption near edge structure), and single-crystal X-ray diffraction, to contain a carbene-like ligand. This is the first structural characterization of a crucial intermediate in the so-called merry-go-round mechanism for Ni-catalyzed isocyanide polymerization.