Synthetic approaches towards new polymer systems by the combination of living carbocationic and anionic polymerizations

This study summarizes recent efforts to obtain by combination of living carbocationic and anionic polymerizations block copolymers which are potential precursors for building new well-defined polymeric architectures with microphase separated morphology. Living carbocationic polymerization (LCCP) yields telechelic polyisobutylene (PIB) chains with a variety of useful endgroups, such as tert-chlorine, isopropenyl, primary hydroxyl, tolyl etc. When tolyl-ended PIB was used as precursor for macroinitiator of living anionic polymerization of 2-(tert-butyldimethylsilyloxy)ethyl methacrylate (tBuMe₂SiOEMA), mixtures of homopolymers and block copolymers were formed due to incomplete lithiation of this chain end. In another approach a new functionalization method was developed by end-quenching living PIB chains with 1,1-diphenylethylene (DPE). In the presence of BCl₃ a new telechelic PIB with 2,2-diphenylvinyl (DPV) endgroups was formed. A corresponding DPV model compound was synthesized from 2-chloro-2,4,4-trimethylpentane (TMPCl). Because of steric hindrance less than quantitative lithiation of this material occurred. Controlled deprotection of PtBuMe₂SiOEMA obtained by living anionic polymerization (LAP) was utilized to prepare a precursor network composed of partially deprotected PtBuM₂SiOEMA and hydroxyl-telechelic PIB by using a diisocyanate crosslinker. After network formation deprotection with HCl was completed and a new amphiphilic network (APN) containing PIB and poly(2-hydroxyethyl) methacrylate) (PHEMA) segments crosslinked by urethane linkages was obtained.     

Functional polymers by living anionic polymerization

The application of living anionic polymerization techniques for the functionalization of polymers and block copolymers is reviewed. The attachment of functional groups to polymeric chains of predetermined lengths and narrow molecular weight distributions is described. Carboxyls, hydroxyls, amines, halogens, double bonds, and many other functional groups can be placed at one or two ends in the center or evenly spaced along polymeric chains. Subsequent transformations of the functional groups further contribute to the versatility of such treatments. General methods based on the use, as terminators, of substituted haloalkanes, as well as the addition of living polymers or their initiators to diphenylethylenes, substituted with appropriate functional groups or molecules, are discussed. Another approach, based on the living polymerization of monomers with protected functional groups, is also discussed. It has been used for the preparation of polymers and copolymers with evenly spaced functional groups. The combination of living anionic polymerization techniques with controlled radical and cationic polymerizations is also described. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2116–2133, 2002     

Synthesis of novel glycopeptide-polyoxazoline block copolymers by direct coupling between living anionic and cationic polymerization systems

A novel glycopeptide-containing block copolymer, poly[O-(tetra-O-acetyl-β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 5 ), was synthesized by mutual termination of living polymerizations of a sugar-substituted α-amino acid N-carboxyanhydride (NCA) ( 1 ) and 2-methyl-2-oxazoline ( 3 ). 5 was deacetylated to provide the glycopeptide-polyoxazoline block copolymer, poly[O-(β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 6 ).     

Design and initiators of living cationic polymerization of vinyl monomers

This paper discusses recent developments in living cationic polymerization of vinyl monomers, specifically focusing on (a) new initiating systems, (b) kinetics and mechanism, and (c) controlled polymer synthesis. The new initiating systems were based on nucleophilic stabilization of the growing carbocations, either by counteranions (as in phosphate/ZnI₂ and Me₃SiI/ZnI₂ systems) or by added Lewis bases (as 2,6-dimethylpyridine for EtAlCl₂). The kinetic study included the determination of the lifetime of living cationic polymers. The controlled polymer synthesis by living cationic processes led to not only end- and pendant-functionalized polymers of narrow molecular weight distributions but also star-shaped polymers and sequence-regulated vinyl ether oligomers with functional groups.     

Historical perspectives on living anionic polymerization

A brief overview of the role that Dr. Michael Szwarc has played in unraveling the mechanism of living anionic polymerization is presented. Emphasis is placed on the different ionic species that control the propagation reaction in ether-type solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2101–2107, 2002     

Recent developments in living cationic polymerization

Scope and limitation of the vinyl ether polymerization initiated by NR₄ClO₄(KClO₄;LiClO₄)/CH₃CHI-OR was discussed. Besides isobutyl vinyl ether (IBVE), N-vinylcarbazole (NVC) and 2-chloroethyl vinyl ether (CEVE) were initiated by NR₄ClO₄/CH₃CHI-OR. These polymerizations exhibited the characteristics of a living polymerization. However, in order to observe narrow molar mass distribution NVC was initiated with CH₃CHI-OR, without salts. Block copolymers were synthesized by the method of sequential monomer addition (NVC, IBVE, CEVE). The PCEVE segment was modified by nucleophilic substitution, which allowed the synthesis of amphiphilic block copolymers.     

Synthesis of new side‐group liquid crystalline block copolymers by living anionic polymerization

A new series of AB liquid crystalline (lc) block copolymers was synthesized via living anionic copolymerization of styrene as segment A and 6‐[4‐(4‐cyanophenylazo)phenoxy]hexyl methacrylate ( 1 ) as segment B. The copolymers were successfully prepared in quantitative yields and with narrow molar mass distributions. The number‐average molar mass of the segments was varied well‐defined. The polystyrene block ranged from 3 500 to 7 400 g/mol. The content of the B segment ranged from 1 to 54 wt.‐%. Thermotropic phases were detected by differential scanning calorimetry (DSC) for block copolymers with an lc segment of more than 30 wt.‐%.     

Synthesis of a ‐shaped amphiphilic block copolymer by the combination of atom transfer radical polymerization and living anionic polymerization

The functionalization of monomer units in the form of macroinitiators in an orthogonal fashion yields more predictable macromolecular architectures and complex polymers. Therefore, a new ‐shaped amphiphilic block copolymer, (PMMA)₂–PEO–(PS)₂–PEO–(PMMA)₂ [where PMMA is poly(methyl methacrylate), PEO is poly (ethylene oxide), and PS is polystyrene], has been designed and successfully synthesized by the combination of atom transfer radical polymerization (ATRP) and living anionic polymerization. The synthesis of meso‐2,3‐dibromosuccinic acid acetate/diethylene glycol was used to initiate the polymerization of styrene via ATRP to yield linear (HO)₂–PS₂ with two active hydroxyl groups by living anionic polymerization via diphenylmethylpotassium to initiate the polymerization of ethylene oxide. Afterwards, the synthesized miktoarm‐4 amphiphilic block copolymer, (HO–PEO)₂–PS₂, was esterified with 2,2‐dichloroacetyl chloride to form a macroinitiator that initiated the polymerization of methyl methacrylate via ATRP to prepare the ‐shaped amphiphilic block copolymer. The polymers were characterized with gel permeation chromatography and ¹H NMR spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 147–156, 2007     

The combination of living radical polymerization and click chemistry for the synthesis of advanced macromolecular architectures

Since its introduction, click chemistry has received a considerable amount of interest. In this contribution, the term click chemistry and the reactions that fall under this term are briefly explained. The main focus of this review is on the application of click chemistry in conjunction with living radical polymerization for the synthesis of advanced macromolecular architectures. Therefore the most powerful living radical polymerization (LRP) techniques are discussed and an overview of click chemistry in the different synthetic schemes is given. A large number of examples are shown that include the synthesis of block copolymers, star-shaped polymers, surface modified particles, and polymer-protein conjugates. The enormous potential of LRP/click chemistry is probably best exemplified by the synthesis of different miktoarm star copolymers, to which a separate section is dedicated.     

Historical perspectives on living anionic polymerization*

The discovery by Michael Szwarc that radical anions of aromatic hydrocarbons in ethereal solvents can transfer electrons to vinyl monomers to yield two‐ended living polymers led to a global resurgence of anionic polymerization. Lack of spontaneous termination of the propagating ends provided a path for the construction of block, star and graft copolymers, telechelics, and other polymeric materials with a well‐ defined architecture. The numerous studies by Szwarc, which started in 1955 and continued until his death on August 2, 2000 were chiefly concerned with the reaction mechanism. A variety of techniques were utilized to explore the kinetics and thermodynamics of anionic polymerization and of electron transfer processes, as well as the structure of ion pairs and their solvation complexes. This paper is focused on the role of various ionic species in the polymerization mechanism, particularly that of tight and loose ion pairs, free ions and triple ions. Their relative preponderance in ethereal solvents turns out to be a sensitive function of temperature, pressure, solvent structure, nature of the counter cation, and the presence of salts or complexing agents. The findings make it possible to rationalize observed retardation effects on adding salts, peculiar temperature phenomena such as regions of negative activation energies, and a host of other phenomena observed in these living polymerizations as a function of the above parameters. In the presence of ruthenium complexes divinyldiorganosilicon compounds undergo de‐ethenated coupling polycondensation yielding under optimum conditions trans‐tactic polysilylene(siloxylene, silazanylene)vinylenes and poly(silylene‐arylene‐vinylenes). Rhodium‐ ([RhX(cod)]₂ X = Cl, OSiMe₃) catalyzed ring closure of oligomeric (dimeric, trimeric) products of intermolecular condensation opens a new route to synthesizing organosilicon exo‐cyclic methylenes. In the presence of Ru‐complexes the cross‐coupling (poly)condensation of di‐ and trivinylsilicon monomers with organic dienes allows syntheses of a series of linear and dendrimeric poly(arylene‐silylene‐vinylene)s.     

Mechanism of initiation of cationic and anionic polymerization of methylenecyclobutenes

The mechanism of initiation of cationic and anionic polymerization of methylenecyclobutenes, yielding different polymeric products, was studied quantum-chemically on the basis of electronic excitation in an elementary chemical process, using the formalism of free valence indices. In the cationic polymerization, the polymer chain consists of cyclobutene fragments linked by methylene bridges, and in anionic polymerization, of saturated cyclobutane fragments linked directly to each other and containing exocyclic methylene substituents.     

Synthesis of amphiphilic tadpole‐shaped copolymers by combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

The tadpole‐shaped copolymers polystyrene (PS)‐b‐[cyclic poly(ethylene oxide) (PEO)] [PS‐b‐(c‐PEO)] contained linear tail chains of PS and cyclic head chains of PEO were synthesized by combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). First, the functionalized polystyrene‐glycerol (PS‐Gly) with two active hydroxyl groups at ω end was synthesized by LAP of St and the subsequent capping with 1‐ethoxyethyl glycidyl ether and then deprotection of protected hydroxyl group in acid condition. Then, using PS‐Gly as macroinitiator, the ROP of EO was performed using diphenylmethylpotassium as cocatalyst for AB₂ star‐shaped copolymers PS‐b‐(PEO‐OH)₂, and the alkyne group was introduced onto PEO arm end for PS‐b‐(PEO‐Alkyne)₂. Finally, the intramolecular cyclization was performed by Glaser coupling reaction in pyridine/Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine system under room temperature, and tadpole‐shaped PS‐b‐(c‐PEO) was formed. The target copolymers and their intermediates were well characterized by size‐exclusion chromatography, proton nuclear magnetic resonance spectroscopy, and fourier transform infrared spectroscopy in details. The thermal properties was also determined and compared to investigate the influence of architecture on properties. The results showed that tadpole‐shaped copolymers had lower T_m, T_c, and X_c than that of their precursors of AB₂ star‐shaped copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of 1-chloro-1-phenylethyl-telechelic polyisobutylene,a new potential macroinitiator by living cationic polymerization

1-Chloro-1-phenylethyl-telechelic polyisobutylene (PIB) was synthesized by living carbocationic polymerization (LCCP). LCCP of isobutylene was induced by a difunctional initiator in conjunction with TiCl₄ as coinitiator in the presence of N,N-dimethylacetamide in CH₂Cl₂/hexane (40:60 v/v) solvent mixture at −78°C. After complete isobutylene conversion a small amount of styrene was added leading to a rapid crossover reaction and thus to the attachment of short outer polystyrene (PSt) blocks to the PIB segment. Quenching the living polymerization of styrene yielded 1-chloro-1-phenylethyl terminal groups. The resulting telechelic polymer (Cl-PSt-PIB-PSt-Cl) is a potential new macroinitiator for atom transfer radical polymerization of a variety of vinyl monomers.     

A new multifunctional initiator system for the living cationic polymerization of vinyl ethers

Combination of hexa(chloromethyl)melamine (HCMM) and zinc chloride was found to be a multifunctional initiator system for the living cationic polymerization of isobutyl vinyl ether. HCMM was synthesized by reaction of hexa(methoxymethyl)melamine and boron trichloride. Characterization of the polymers by means of GPC and ¹H NMR showed that initiation was rapid and quantitative and that the initiator is hexafunctional, leading to six‐armed star‐shaped polymers.     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006     

Progress in controlled polymerization and design of novel polymer architectures

Recent developments of new synthetic methods are stimulating the design of new polymers. Modern generations of highly active and selective transition metal catalysts give excellent control on molecular weight, regio- and stereoregularities, long- and short-chain-branching, polymer crystallization, and morphology of olefin, diene, cyclolefin, and styrene polymers. Ethene is copolymerized with polar comonomers such as carbon monoxide and acrylates in new low pressure processes. Catalytic coupling reactions of aromatic halogen compounds and bisphenols afford rigid polyarylenes. „Living” radical polymerization (“TEMPO” and “ATRP”) produce a wide range of telechelics, block copolymers and cascade macromolecules. In reactive processing oxazoline-mediated coupling reactions are the key to melt diversification of well-known polymers. Supramolecular concepts are being applied to tailor hybrid polymers and nanocomposites. Precision in polymer synthesis is the key to new materials with wide application range.     

Thermoresponsive NIPAM block copolymers containing densely grafted poly(vinyl ether) brushes synthesized by a combination of living cationic polymerization and RAFT polymerization

Diblock copolymers consisting of a multibranched polymethacrylate segment with densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and a poly(N‐isopropylacrylamide) segment were synthesized by a combination of living cationic polymerization and RAFT polymerization. A macromonomer having both a poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] backbone and a terminal methacryloyl group was synthesized by living cationic polymerization. The sequential RAFT copolymerizations of the macromonomer and N‐isopropylacrylamide in this order were performed in aqueous media employing 4‐cyanopentanoic acid dithiobenzoate as a chain transfer agent and 4,4′‐azobis(4‐cyanopentanoic acid) as an initiator. The obtained diblock copolymers possessed relatively narrow molecular weight distributions and controlled molecular weights. The thermoresponsive properties of these polymers were investigated. Upon heating, the aqueous solutions of the diblock copolymers exhibited two‐stage thermoresponsive properties denoted by the appearance of two cloud points, indicating that the densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and the poly(N‐isopropylacrylamide) segments independently responded to temperature. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Organo-modified cationic silica nanoparticles/anionic polymer as flocculants

The synthesis of quaternized silica nanoparticles and its application to fine clay flocculation were investigated. N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride was used as a cationic reagent to introduce quaternary amine groups onto the surfaces of silica nanoparticles via the formation of covalent bonds between the methoxy groups of the cationic reagents and the silanol groups in the silica surface. The zeta potential, zeta, and charge density of the silica particles modified under various reaction conditions were determined. Dynamic clay flocculation experiments using a photometric dispersion analyzer (PDA) showed that the cationic silica alone contributed little to the flocculation. However, the cationic silica, in conjunction with an anionic polymer of high M(w) and low charge density, led to a significant improvement in the flocculation of fine clay particles. The mechanism of flocculation was explored by a systematic investigation of interaction between cationic silica and anionic polymers as well as of their adsorption behavior on clay surfaces. The influence of factors such as pH and electrolyte concentration on clay flocculation was also investigated.