Electroluminescence of a bichromophoric molecule with a benzoxyazolylcoumarin and carbazole moiety

The electroluminescent properties of a bichromophoric molecule in which a benzoxyazolylcoumarin and carbazole moiety is combined with 1,2-ethylene linkage, i.e. 3-(2-benzoxyazolyl)-7-[2-(9-carbazolyl)ethoxy]-coumarin (CmCz), were investigated. CmCz exhibits fluorescence of different colors in a solid state and solution. Two types of device were made. One consisted of a vacuum vapor-deposited film of CmCz as an emission layer to utilize fluorescence in the solid state; the second consisted of a spin-cast film doped with CmCz as an emission material to utilize fluorescence in the solution. The device with a vapor-deposited CmCz film between electrodes shows a green emission with a luminance of less than 10⁻² cd/m². The multiple layer device in which the CmCz film was sandwiched between a hole transport layer and electron transport layer showed a green emission whose spectrum is identical to the photoluminescent spectrum in the vapor-deposited CmCz film. A maximum luminance of the multiple layer device is about 5000 cd/m². On the other hand, the devices consisting of a spin-cast film containing a hole transport material, an electron transport material and CmCz showed a blue emission whose spectra are identical to the photoluminescent spectrum of CmCz in chloroform. Luminance of these devices is over 100 cd/m². © 1997 John Wiley & Sons, Ltd.     

Organic electroluminescent devices using europium complex‐doped poly(N‐vinylcarbazole)

Electroluminescence (EL) properties of europium (Eu) complex‐doped poly(N‐vinylcarbazole) (PVK) were investigated. A device structure of glass substrate/indium‐tin oxide/hole‐injection layer/Eu complex‐doped PVK/hole‐blocking layer/electron transport layer/electron‐injection layer/Al was employed. Red emission originating from Eu complex was observed. Relatively high luminance of 50 cd/m² and an efficiency of 0.2% were obtained. Copyright © 2004 John Wiley & Sons, Ltd.     

Charge transport polymers for organic electroluminescent devices

Triple-layer-type organic electroluminescent devices were fabricated using charge-transporting poly(N-vinylcarbazole) (PVK) as a hole-transporting emitter layer. Electron-transporting layers consisting of a triazole derivative (TAZ) and an aluminum complex (Alq) layer were used to maximize the carrier recombination efficiency. The EL device with a structure of glass substrate/indium-tinoxide/PVK/TAZ/AIq/Mg:Ag showed bright blue emission from the PVK layer with a luminance of over 700 cd/m². The emission color was tuned to a desirable color in the visible region through doping the PVK layer with fluorescent dyes. Bright white emission, in particular, was obtained for the first time at a high luminance level of over 3000 cd/m² by using three kinds of fluorescent dyes each emitting red, green or blue.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Electroluminescent properties of a partially‐conjugated hyperbranched poly(p‐phenylene vinylene)

In this paper, the electroluminescent properties of a new partially‐conjugated hyperbranched poly (p‐phenylene vinylene) (HPPV) were studied. The single layer light‐emitting device with HPPV as the emitting layer emits blue‐green light at 496 nm, with a luminance of 160 cd/m² at 9 V, a turn‐on voltage of 4.3 V and an electroluminescent efficiency of 0.028 cd/A. By doping an electron‐transport material [2‐(4‐biphenylyl)‐5‐phenyl‐1,3,4‐oxadiazole, PBD] into the emitting layer and inserting a thin layer of tris(8‐hydroxy‐quinoline)aluminum (Alq₃) as electron transporting/hole blocking layer for the devices, the electroluminescent efficiency of 1.42 cd/A and luminance of 1700 cd/m² were achieved. The results demonstrate that the devices with the hyperbranched polymers as emitting material can achieve high efficiency through optimization of device structures. Copyright © 2006 John Wiley & Sons, Ltd.     

The Effect of Controlled Dopant Concentration on the Performance of Blue Polymer Light‐emitting Diodes

The performance of a blue polymer light‐emitting diodes (PLED) was significantly improved by doping a controlled amount (<1%) of a hole transport molecule N,N′‐bis‐(1‐naphthyl)‐N,N′‐diphenyl‐1,1′‐biphenyl‐4,4″‐diamine (NPB) into the emitting layer. Hole carrier mobility of the blue emitting polymer, BP105 (trade name of The Dow Chemicals Co.), increased from 5.27 × 10^‐7 cm^‐2/Vs of the pristine BP105 to 1.80 × 10^‐6 cm^‐2/Vs with the addition of 1% NPB in BP105. The enhanced carrier mobility greatly promoted performance of a blue PLED device with a device structure of ITO/PEDOT:PSS/BP105+x% NPB/LiF/Ca/Al. Luminance increased from 573 cd/m² to 2,720 cd/m² at 6V and efficiency increased from 1.1 lm/W to 1.6 lm/W at 1,000 cd/m² with 1% NPB in BP105. The most important improvement was an increase in the lifetime of the blue device from 80 to 120 hours at an initial luminance of 400 cd/m². We found that by choosing the appropriate dopant with good energy alignment and controlled dopant concentration, the performance of a blue PLED device could be greatly improved.     

Synthesis,characterization, and electroluminescent performance of a novel copolyfluorene containing pendant crown ether groups

Copolyfluorene PFC containing pendant crown ether moieties was prepared by the palladium‐catalyzed Suzuki coupling reaction. The photo‐physical and electrochemical properties were investigated by absorption, photoluminescence (PL) spectroscopy, and cyclic voltammetry to elucidate the influence of the crown ether groups. In film state, its PL spectra (peaked at 430 and 452 nm) show noticeable red‐shift relative to 423 and 448 nm of poly(9,9‐dihexylfluorene) ( PF ). Thermal annealing leads to appearance of new emission at about 520 nm which has been attributed to formation of excimer. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of PFC were estimated to be ?5.68 and ?2.65 eV which contributed to balanced charges injection. Double‐layer electroluminescent device using PFC as emitting layer (ITO/PEDOT:PSS/ PFC /Ca/Al) revealed maximum luminance (7910 cd/m²) and maximum luminance efficiency (2.3 cd/A) superior to those of PF device (860 cd/m², 0.29 cd/A). Moreover, inserting a PFC layer between the PF emitting layer and calcium cathode led to reduced turn‐on voltage (4.1 V), much lower than 7.1 and 6.6 V of the double‐layer PFC and PF devices, respectively, and enhanced device performance (2800 cd/m² and 0.53 cd/A). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2985–2995, 2009     

Polyfluorene containing diphenylquinoline pendants and their applications in organic light emitting diodes

We present a short, efficient synthetic route for the preparation of a novel polyfluorene copolymer (PF‐Q) containing two electron‐deficient, 2,4‐diphenylquinoline groups functionalized at the C‐9 positions of alternate fluorene units that form a three‐dimensional cardostructure. The presence of the rigid bulky pendent groups leads to a polyfluorene possessing a high glass‐transition temperature (207 °C) and very good thermal stability (5% weight loss observed at 460 °C). A photoluminescence study revealed that the Förster energy transfer from the excited quinoline groups to the polyfluorene backbone is very efficient; it also demonstrated that the commonly observed aggregate/excimer formation in polyfluorenes is suppressed very effectively in this polymer, even after it has been annealed at 150 °C for 20 h. A light emitting diode (LED) device prepared with PF‐Q as the emitting layer exhibits a stable blue emission with a maximum brightness of 1121 cd/m² at 12 V and a maximum external quantum efficiency of 0.80% at 250 cd/m². We also used PF‐Q, which contains diphenylquinoline units that behave as electron‐transporting side chains, as a host material and doped it with 2.4 wt % of a red‐emitting phosphorescent dye, Os(fppz), to realize a red electroluminescence with CIE color coordinates of (0.66, 0.34). The doped device exhibits a maximum external quantum efficiency of 6.63% (corresponding a luminance efficiency of 8.71 cd/A) at a current density of 47.8 mA/cm², together with a maximum brightness of 10457 cd/m². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 859–869, 2005     

Synthesis of fluorene‐based hyperbranched polymers for solution‐processable blue,green, red,and white light‐emitting devices

For the purpose of making hyperbranched polymer (Hb‐Ps)‐based red, green, blue, and white polymer light‐emitting diodes (PLEDs), three Hb‐Ps Hb‐ terfluorene ( Hb‐TF ), Hb ‐4,7‐bis(9,9′‐dioctylfluoren‐2‐yl)‐2,1,3‐benzothiodiazole ( Hb‐BFBT ), and Hb‐ 4,7‐bis[(9,9′‐dioctylfluoren‐2‐yl)‐thien‐2‐yl]‐2,1,3‐benzothiodiazole ( Hb‐BFTBT ) were synthesized via [2+2+2] polycyclotrimerization of the corresponding diacetylene‐functionalized monomers. All the synthesized polymers showed excellent thermal stability with degradation temperature higher than 355 °C and glass transition temperatures higher than 50 °C. Photoluminance (PL) and electroluminance (EL) spectra of the polymers indicate that Hb‐TF , Hb‐BFBT , and Hb‐BFTBT are blue‐green, green, and red emitting materials. Maximum brightness of the double‐layer devices of Hb‐TF , Hb‐BFBT , and Hb‐BFTBT with the device configuration of indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/light‐emitting polymer/CsF/Al are 48, 42, and 29 cd/m²; the maximum luminance efficiency of the devices are 0.01, 0.02, and 0.01 cd/A. By using host–guest doped system, saturated red electrophosphorescent devices with a maximum luminance efficiency of 1.61 cd/A were obtained when Hb‐TF was used as a host material doped with Os(fptz)₂(PPh₂Me₂)₂ as a guest material. A maximum luminance efficiency of 3.39 cd/A of a red polymer light‐emitting device was also reached when Hb‐BFTBT was used as the guest in the PFO (Poly(9,9‐dioctylfluorene)) host layer. In addition, a series of efficient white devices were, which show low turn‐on voltage (3.5 V) with highest luminance efficiency of 4.98 cd/A, maximum brightness of 1185 cd/m², and the Commission Internationale de l'Eclairage (CIE) coordinates close to ideal white emission (0.33, 0.33), were prepared by using BFBT as auxiliary dopant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Improved Efficiency Roll-Off and Operational Lifetime of Organic Light-Emitting Diodes with a Tetradentate Platinum(II) Complex by Using an n-Doped Electron-Transporting Layer

The efficiency roll-off and operational lifetime of organic light-emitting diodes (OLEDs) with a tetradentate Pt(II) emitter is improved by engaging an n-doped electron-transporting layer (ETL). Compared to those devices with non-doped ETL, the driving voltage is lowered, the charged carrier is balanced, and the exciton density in the emissive layer (EML) is decreased in the device with n-doped ETL with 8-hydroxyquinolinolatolithium (Liq). High luminance of almost 70,000 cd m⁻² and high current efficiency of 40.5 cd A⁻¹ at high luminance of 10,000 cd m⁻² is achieved in the device with 50 wt%-Liq-doped ETL. More importantly, the extended operational lifetime of 1945 h is recorded at the initial luminance of 1000 cd m⁻² in the 50 wt%-Liq-doped device, which is longer than that of the device with non-doped ETL by almost 10 times. This result manifests the potential application of tetradentate Pt(II) complexes in the OLED industry.     

Synthesis and electroluminescence properties of fluorene containing arylamine oligomer

We synthesized a blue fluorescent fluorene containing arylamine oligomer, bis(9,9,9′,9′‐tetra‐n‐octyl‐2,2′‐difluorenyl‐7‐yl)phenylamine (DFPA), and investigated its electroluminescence (EL) properties. Organic EL devices with a structure of glass/indium‐tin oxide/acid‐doped poly(thiophene) derivative/DFPA/aluminum complex (BAlq)/cesium‐doped macrocyclic compound/Al were fabricated. The device exhibited blue emission, peaking at 432 nm, from the DFPA layer. The maximum luminance of 1800 cd/m² and an external quantum efficiency of 1.5% were observed. Copyright © 2004 John Wiley & Sons, Ltd.     

High luminance phosphorescent organic light emitting diodes based on Re(I) complex

A novel Re(I) complex with the acenaphtho[1,2-b]pyrazino[2,3-f][1,10]phenanthroline (APPT) ligand Re(APPT)(CO)₃Br (abbreviated as Re-APPT) was used to fabricate organic light emitting diodes (OLEDs). From the electroluminescence (EL) spectra of the device at different bias voltages, it could be found that the EL maxima shifted approximately 30 nm. For OLEDs with 5% Re-APPT doped emissive layer, turn-on voltage of 6 V, maximum luminance of 7631 cd/m² and a current efficiency up to 2.36 cd/A were obtained. We suppose that a direct charge trapping took the dominant position in the EL process. Trapping contributed mostly to this relatively higher luminance.     

Bipolar copoly(aryl ether) containing distyrylbenzene,triphenylamine, and 1,2,4‐triazole moieties: Synthesis and optoelectronic properties

A novel copoly(aryl ether) ( P1 ) consisting of alternate emitting segments (distyrylbenzene) and a bipolar moiety composed of directly linked electron‐transporting aromatic 1,2,4‐triazole and hole‐transporting triphenylamine was synthesized. The copoly(aryl ether) is readily soluble in common organic solvents and exhibit good thermal stability with thermal decomposition temperature above 450 °C. The emission and the photoluminescence quantum yield of the copolymer are dominated by the emitting segments (distyrylbenzene) with longer emissive wavelength. Electron affinity of P1 is evidently enhanced after introducing the isolated bipolar unit, as confirmed by the lowered lowest unoccupied molecular orbital level (–2.77 eV) relative to P0 without bipolar unit (–2.34 eV). This results in improved emission efficiency of its polymer light‐emitting diode (indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/ P1 /LiF/Ca/Al) due to more balanced charges injection and transport. Blending P1 with poly(9,9‐dihexylfluorene) ( PF ) further improves the efficiency of the device; the best performance was obtained for PF / P1 = 20/0.8 (w/w) with maximum luminance and maximum luminance efficiency being significantly enhanced to 3260 cd/m² and 1.08 cd/A, respectively, from 380 cd/m² and 0.009 cd/A of P1 ‐based device. These results demonstrate that the bipolar moiety can be used to enhance charges injection and transport of electroluminescent polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polyfluorene presenting dipolar pendent groups and its application to electroluminescent devices

We have synthesized a blue-light-emitting polyfluorene derivative (PF-TPAOXD) that presents sterically hindered, dipolar pendent groups functionalized at the C-9 positions of alternating fluorene units. The incorporation of the dipolar side chains, each comprising an electron-rich triphenylamine group and an electron-deficient oxadiazole group connected through a π-conjugated bridge, endows the resultant polymer with higher highest occupied molecular orbital and lower lowest unoccupied molecular orbital energy levels, which, consequently, lead to an increase in both hole and electron affinities. An electroluminescent device incorporating this polymer as the emitting layer exhibited a stable blue emission with a maximum brightness of 2080 cd/m² at 12 V and a maximum external quantum efficiency of 1.4% at a brightness of 137 cd/m². Furthermore, atomic force microscopy measurements indicated that the dipolar nature of PF-TPAOXD, in contrast to the general nonpolarity of polydialkylfluorenes, provided a stabilizing environment allowing the polar organometallic triplet dopant to be dispersed homogeneously. We also fabricated an electrophosphorescent device incorporating PF-TPAOXD as the host material doped with a red-emitting osmium complex to realize red electroluminescence with Commission Internationale de l'Eclairage color coordinates of (0.66, 0.34). The resulting device exhibited a maximum external quantum efficiency of 7.3% at a brightness of 1747 cd/m² and a maximum brightness of 7244 cd/m². © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2073–2084, 2007     

Copolyfluorenes containing pendant bipolar carbazole and 1,2,4‐triazole groups: Synthesis,characterization, and optoelectronic applications

Three novel copolyfluorenes ( P1 ‐ P3 ) containing pendant bipolar groups (2.5–7.7 mol %), directly linked hole‐transporting carbazole and electron‐transporting aromatic 1,2,4‐triazole, were synthesized by the Suzuki coupling reaction and applied to enhance emission efficiency of polymer light‐emitting diodes based on conventional MEH‐PPV. The bipolar groups not only suppress undesirable green emission of polyfluorene under thermal annealing, but also promote electron‐ and hole‐affinity of the resulting copolyfluorenes. Blending the bipolar copolyfluorenes with MEH‐PPV results in significant enhancement of device performance [ITO/PEDOT:PSS/MEH‐PPV+ P1 , P2 or P3 /Ca(50 nm)/Al(100 nm)]. The maximum luminance and luminance efficiency were enhanced from 3230 cd/m² and 0.29 cd/A of MEH‐PPV‐only device to 15,690 cd/m² and 0.81 cd/A (blend device with MEH‐PPV/ P3 = 94/6 containing about 0.46 wt % of pendant bipolar residues), respectively. Our results demonstrate the efficacy of the bipolar copolyfluorenes in enhancing emission efficiency of MEH‐PPV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Multifunctional zig-zag-shaped D-π-A-π-D emitters with high conjugation extent for blue FOLEDs and host for PHOLEDs

We have synthesized zig-zag shaped, meta- and para-linked D-π-A-π-D blue emitters, m-BTPAPy and p-BTPAPy based on a non-symmetrical connection strategy of two identical π-conjugated groups. The phenanthrimidazole moiety coupled to pyridine via naphthyl spacer by para- and meta-linking modes. Both m-BTPAPy (T_d/T_g, °C: 564/281) and p-BTPAPy (T_d/T_g, °C: 502/246) exhibit excellent thermal stability and can form a stable amorphous film. Changing the connection strategy from para to meta mode, m-BTPAPy shows deep blue emission with CIE (0.15, 0.07). The highly twisted m-BTPAPy exhibit higher Photoluminescence quantum yield (PLQY)_s/f of 0.98/0.85 than p-BTPAPy (0.95/0.80) owing to the suppression of intermolecular stacking. The non-doped blue device (BOLEDs) with multifunctional m-BTPAPy/p-BTPAPy show external quantum efficiency (EQE) of 7.12/5.12% with small roll-off efficiency of 1.68/2.14%, power efficiency (PE) of 5.92/5.42 lm/W, the luminance of 58675/76234 cd/m², and current efficiency (CE) of 6.12/5.86 cd/A. The non-doped device using m-BTPAPy/p-BTPAPy as both emitting and electron-transporting material exhibit luminance of 40671/49539 cd/m², CE of 5.01/5.08 cd/A, PE of 4.68/4.76 lm/W, EQE of 6.12/4.81%, roll-off efficiency of 1.63/1.87%, and CIE (0.15, 0.10)/(0.15, 0.11). These bipolar materials with high triplet energy were employed as hosts in green and red PhOLEDs. The green (m-BTPAPy: Ir(ppy)₃)/red device (m-BTPAPy: Ir(MDQ)₂(acac)) exhibit maximum EQE of 29.85/20.09%, luminance of 79523/42412 cd/m², CE of 78.62/27.56 cd/A, and PE of 72.36/23.86 lm/W, and CIE (0.33, 0.60)/(0.65,0.33).     

Copolyphenylenes with pendant benzimidazolyl and diethanolaminohexyloxy groups: Synthesis and electron‐transporting application in PLEDs

Two new electron‐transporting copolyphenylenes P1NH and P2NH possessing balanced charges crucial to emission efficiency of polymer light‐emitting diodes (PLEDs) have been synthesized and applied as an electron‐transporting layer (ETL). The main chain structure is all para‐linkage for P1NH and both para‐ and meta‐linkage for P2NH , with the same pendant electron‐withdrawing benzimidazolyl and polar diethanolaminohexyloxy groups. Both copolymers possess excellent thermal stability (T _d > 300 °C, T _g > 100 °C) due to their rigid backbones. In addition, the pendant groups effectively lower LUMO (～ ?2.70 eV) and HOMO (～ ?5.70 eV) levels, resulting in improved electron‐transporting and hole‐blocking capabilities. Multilayer yellow‐emitting PLEDs with a configuration of ITO/PEDOT:PSS/SY/ETL/LiF/Al were successfully fabricated by the spin‐coating process. The maximum luminance and maximum current efficiency of the P1NH ‐based device were 12,881 cd/m² and 10.94 cd/A, respectively, superior to the performance of P2NH ‐based device (4938 cd/m², 3.70 cd/A) and the device without ETL (8690 cd/m², 2.78 cd/A). Current results indicate that P1NH is highly effective in enhancing electron transport and device performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2494–2505     

Synthesis of an electroluminescent polymer and its non‐doped light‐emitting diodes with stable green emission

An electroluminescent polymer was synthesized by Wittig condensation and characterized by the measurements of ¹H‐NMR, IR, gel permeation chromatography (GPC), UV–Vis, PL, and cyclic voltammetry (CV). The polymer can be dissolved in common organic solvents such as tetrahydrofuran (THF), chloroform, and dichloromethane. The electroluminescent investigation showed that the non‐doped devices with a double‐layer configuration (ITO/PEDOT:PSS/Polymer/Mg:Ag) have a stable green emission property. The maximum luminance of the annealed device reaches 2317 cd/m². The emission maximum and the CIE 1931 coordinate values are respectively stabilized at 552 nm and near (x, y) = (0.43, 0.55) with different voltages. Copyright © 2008 John Wiley & Sons, Ltd.     

Tailored Design of π-Extended Multi-Resonance Organoboron using Indolo[3,2-b]Indole as a Multi-Nitrogen Bridge

Extending the π-skeletons of multi-resonance (MR) organoboron emitters can feasibly modulate their optoelectronic properties. Here, we first adopt the indolo[3,2-b]indole (32bID) segment as a multi-nitrogen bridge and develop a high-efficiency π-extended narrowband green emitter. This moiety establishes not only a high-yield one-shot multiple Bora–Friedel–Crafts reaction towards a π-extended MR skeleton, but a compact N-ethylene-N motif for a red-shifted narrowband emission. An emission peak at 524 nm, a small full width at half maximum of 25 nm and a high photoluminescence quantum yield of 96 % are concurrently obtained in dilute toluene. The extended molecular plane also results in a large horizontal emitting dipole orientation ratio of 87 %. A maximum external quantum efficiency (EQE) of 36.6 % and a maximum power efficiency of 135.2 lm/W are thereafter recorded for the corresponding device, also allowing a low efficiency roll-off with EQEs of 34.5 % and 28.1 % at luminance of 1,000 cd/m² and 10,000 cd/m², respectively.     

Copoly(p‐phenylene)s containing bipolar triphenylamine and 1,2,4‐triazole groups: Synthesis,optoelectronic properties,and applications

Two novel copoly(p‐phenylene)s ( P1 – P2 ) containing bipolar groups (12.8 and 6.8 mol %, respectively), directly linked hole transporting triphenylamine and electron transporting aromatic 1,2,4‐triazole, were synthesized to enhance electroluminescence (EL) of poly(p‐phenylene vinylene) (PPV) derivatives. The bipolar groups not only enhance thermal stability but also promote electron affinity and hole affinity of the resulting copoly(p‐phenylene)s. Blending the bipolar copoly‐(p‐phenylene)s ( P1 – P2 ) with PPV derivatives ( d6‐PPV ) as an emitting layer effectively improve the emission efficiency of its electroluminescent devices [indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/polymer blend/Ca (50 nm)/Al (100 nm)]. The maximum luminance and maximum luminance efficiency were significantly enhanced from 310 cd m^?2 and 0.03 cd A^?1 ( d6‐PPV ‐based device) to 1450 cd m^?2 and 0.20 cd A^?1 (blend device with d6‐PPV / P1 = 96/4 containing ～0.5 wt % of bipolar groups), respectively. Our results demonstrate the efficacy of the copoly(p‐phenylene)s with bipolar groups in enhancing EL of PPV derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010