Synthesis of aliphatic polyesters by controlled ring-opening polymerization of cyclic esters. Characterization,properties, transesterification reactions

The polymerization of (D,L)-Lactide at room temperature in solution using Y(OCH₂CH₂OiPr)₃ and Ln₅(μ-O)(OiPr)₁₃ with Ln = La, Sm, Y, Yb as initiators was studied. According to kinetic data, a controlled type polymerization is observed for most of the systems. La μ-oxoisopropoxide is the most reactive initiator, but leads to a substantial broadening of molecular weight distribution at high conversions. The nature of transesterification reactions was studied by SEC, ¹³C NMR and MALDI-TOF MS techniques. For Sm and Y-μ-oxo initiators only limited intermolecular ester exchange occurs, while with La μ-oxoinitiator and with Y(OCH₂CH₂OiPr)₃ initiator, but after a long time of the polymerization reaction, both inter and intramolecular transesterification occur with formation of cyclics.     

Curing reaction of unsaturated (epoxy) polyesters based on different aliphatic glycols

The influence of the structure of succinic or glutaric anhydride modified linear unsaturated (epoxy) polyesters on the course of the cure reaction with styrene initiated by benzoyl peroxide (BPO) or the mixture of benzoyl peroxide/tetrahydrophthalic anhydride (BPO/THPA) or benzoyl peroxide/maleic anhydride, as well as viscoelastic properties and thermal behavior of their styrene copolymers have been studied by DSC, DMA, and TGA analyses. Additionally, mechanical properties: flexural properties using three-point bending test and Brinell’s hardness for studied copolymers were evaluated. It was confirmed that the structure of used polyesters had a considerable influence on the course of the cure reaction with styrene, viscoelastic, thermal, and mechanical properties of prepared styrene copolymers. Generally, one or two asymmetrical peaks for the cure reaction of succinic or glutaric anhydride modified linear unsaturated epoxy polyesters with styrene were observed. They were connected with various cure reaction, e.g., copolymerization of carbon–carbon double bonds of polyester with styrene, thermal curing of epoxy groups, polyaddition reaction of epoxy to anhydride groups in dependence of used curing system. In addition, only one asymmetrical, exothermic peak attributed to the copolymerization process of succinic or glutaric anhydride modified linear unsaturated polyesters with styrene was visible. Moreover, the obtained styrene copolymers based on succinic or glutaric anhydride modified linear unsaturated epoxy polyesters were characterized by higher values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but lower ε − F _max compared to those values observed for styrene copolymers prepared in the presence of succinic or glutaric anhydride modified linear unsaturated polyesters. This supported to the production of stiffer and more thermally stable polymeric structure of copolymers based on unsaturated epoxy polyesters. Moreover, the copolymers prepared in the use of glutaric anhydride modified linear unsaturated (epoxy) polyesters were described by lower values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but higher ε − F _max than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters. The presence of longer aliphatic chain length in polyester’s structure leads to produce more flexible network structure of styrene copolymers based on glutaric anhydride modified linear unsaturated (epoxy) polyesters than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters.     

Synthesis and properties of polymeric materials prepared by anionic polymerization of epoxy oligomers

The kinetics of anionic polymerization of epoxy oligomers of different functionalities in the presence of imidazoles was studied. Polymers based on the chosen systems, exhibiting high elastic and deformation characteristics at compression in a wide temperature range, and also resistance to heat and water, were synthesized. The epoxy compounds exhibit high adhesion to aluminum, preserved at elevated temperatures (150°C).     

Synthesis of aliphatic polyesters containing tetracyanoquinodimethane units by low-temperature polycondensation reactions

The low-temperature solution polycondensation reaction between 1,4-bis-(2′-hydroxy-ethoxy)benzene and adipyl chloride has been studied in N,N-dimethylacetamide. The effect of temperature, concentration, and reaction time on the percent yield and product viscosity has been determined. Optimum conditions were established for the preparation of high molecular weight products and then applied to the synthesis of novel tetracyanoquinodimethane polyesters. Products were characterized by gel permeation chromatography.     

Conductivity studies of polymer electrolytes based on aliphatic polyesters

A series of aliphatic polyesters of sebacoyl chloride and poly(ethylene glycol) containing a different number of ethylene oxide groups was synthesized and characterized. These polyesters were complexed with lithium perchlorate to obtain a new class of polymer electrolyte. The relationships between the structure and properties of these polymer electrolytes were investigated. The main factor that affects the ionic conductivity in these systems was found to be the solvating capacity of the polyester for the lithium salt. These polymer electrolytes showed ionic conductivities up to 10^?5 ? 10^?4 S/cm at 25°C. The mechanical strength was improved by cross-linking, and the cross-linked polyester complexed with a LiCIO₄ salt showed an ionic conductivity of 2 × 10^?5 S/cm at room temperature. ⁷Li NMR spin-spin relaxation and dielectric relaxation studies were also carried out to investigate the local environments and dynamics of ions in the polymer electrolytes. © 1995 John Wiley & Sons, Inc.     

Synthesis of aliphatic polyesters by polycondensation using inorganic acid as catalyst

An effective route for the synthesis of aliphatic polyesters made from adipic or sebacic acid and alkanediols, using inorganic acid as a catalyst is reported. The monomer composition, reaction time, catalyst type, and reaction conditions were optimized to yield polyesters with weight average molecular weights of 23,000 for adipic acid and 85,000 for sebacic acid‐based polyesters. The polymers melt at temperatures of 52–65°C and possess melt viscosity in the range of 5600–19,400cP. This route represents an alternative method for producing aliphatic polyesters for possible use in the preparation of degradable disposable medical supplies. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

由可控聚合反应直接制备不同形貌的聚集体

由可控聚合,包括活性阴离子和自由基聚合直接制备不同形貌纳米材料,是近几年来合成化学领域的一个重要研究成果.与两亲性嵌段共聚物在选择性溶剂中自组装方法不同,在选择性溶剂中进行的分散聚合,首先生成两亲性嵌段共聚物,并逐渐增加第二段聚合物的链长,以实现相分离,形成球形胶束;聚合物链继续增长,实现形貌转变,从而制备预期的聚合物形貌,包括球形胶束、纳米棒、纳米线、囊泡和复合囊泡等.本文综述了乳液聚合法制备球形胶束等形貌;描述了不同聚合体系形成的形貌以及它们的性质和应用,讨论了形貌的形成机理和控制方法,同时指出了存在的问题.     

Syntheses of aliphatic polyesters catalyzed by lanthanide triflates

Polycondensations of 1,6‐hexane diol and sebacic acid were conducted in bulk with addition of a lanthanide triflate as acidic catalyst. With exception of promethium triflate all lanthanide triflates were studied. A particularly low molecular weight was obtained with neodym triflate and the best results with samarium triflate. With Sm(OTf)₃ weight average (M_w) values up to 65 kDa (uncorrected SEC data) were achieved after optimization of the reaction conditions. Comparison of these results with those obtained from bismuth, magnesium, and zinc triflates, on the one hand, and comparison with the acidities of all catalysts, on the other, indicates that the esterification mechanism involves complexation of monomer by metal ions. Preparation of multiblock copoly(ether ester)s failed due to insufficient incorporation of poly(tetrahydrofuran) diols. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 170–177, 2009     

Structural effects on biodegradation of aliphatic polyesters

Various types of aliphatic polyesters were prepared by both biosynthetic and chemosynthetic methods, and their biodegradation tests were carried out under aerobic conditions in the river water. Biodegradabilities of polyester films were evaluated by monitoring the time-dependent changes in the biochemical oxygen demand (BOD), weight loss (erosion) of polyester film, and dissolved organic carbon concentration (DOC) of test solution. The microbial copolyesters were degraded in the river water at a rapid rate, and the weight-loss- and BOD-biodegradabilities of the majority of biosynthetic polyesters were 100 % and 80±5 % for 28 days, respectively. In contrast, the biodegradabilities of chemosynthetic polyesters were strongly dependent of the chemical structure of monomeric units.     

Combination of ring-opening polymerization and "click" chemistry towards functionalization of aliphatic polyesters

Azide pendent groups of aliphatic polyesters have been derivatized into tertiary amines, ammonium salts and poly(ethylene oxide) grafts. The experimental conditions have been optimized (organic solvent, 35 degrees C), such that the aliphatic polyesters are not degraded, including even poly(lactide) which is very sensitive to attack by weak nucleophiles.     

Synthesis and characterization of biodegradable aliphatic polyesters using dibutylmagnesium as initiator

Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution. The resulting polymers were characterized by 1H, 13C NMR, GPC and XRD. The results indicated that dibutylmagnesium is an effective initiator for the ring opening polymerization of lactones.     

Sulphur-containing polymers: Synthesis and thermal properties of novel polyesters based on dithiotriethylene glycol

Poly(dithiotriethylene terephthalate) (PSSTET), poly(dithiotriethylene adipate) (PSSTEA), poly(triethylene terephthalate) (PTET) and poly(triethylene adipate) (PTEA), these two last for comparison, were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behaviour was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the sulphur-containing polyesters. At room temperature they appeared as semicrystalline materials, except PTEA, which was an oil; the effect of substitution of ether oxygen atoms with sulphur ones was found to be a lowering in the T_g value, an increment of the melting temperature and an increase of the crystallization rate. The results were explained as due to the presence of flexible C-S-C bonds in the polymeric chain. Lastly, the absence of a rigid-amorphous phase was evidenced in PSSTET and PTET.     

Nanocomposites of aliphatic polyesters: An overview of the effect of different nanofillers on enzymatic hydrolysis and biodegradation of polyesters

In the present review the findings concerning the effect of nanofillers to biodegradation and enzymatic hydrolysis of aliphatic polyesters were summarized and discussed. Most of the published works are dealing with the effect of layered silicates such as montmorillonite (unmodified and modified with organic compounds), carbon nanotubes and spherical shape additives like SiO₂ and TiO₂. The degradation of polyester due to the enzymatic hydrolysis is a complex process involving different phenomena, namely, water absorption from the polyesters, enzymatic attack to the polyester surface, ester cleavage, formation of oligomer fragments due to endo- or exo-type hydrolysis, solubilization of oligomer fragments in the surrounding environment, diffusion of soluble oligomers by bacteria and finally consumption of the oligomers and formation of CO₂ and H₂O. By studying the published works in nanocomposites, different and sometimes contradictory results have been reported concerning the effect of the nanofillers on aliphatic polyesters biodegradation. Most of the papers suggested that the addition of nanofillers provokes a substantial enhancement of polyester hydrolysis due to the catalyzing effect of the existed reactive groups (–OH and –COOH), to the crystallinity decrease, to the higher hydrophilicity of nanofillers and thus higher water uptake, to the higher interactions, etc. However, there are also some papers that suggested a delay effect of nanofillers to the polyesters degradation mainly due to the barrier effect of nanofillers and the lower available surface for enzymatic hydrolysis.     

A novel high efficiency benzophenone based polymeric photoinitiator from ring-opening polymerization of benzoxazine

A novel polymeric photoinitiator based on benzoxazine was synthesized by introducing 4-hydroxy benzophenone, diglycolamine and paraformaldehyde into the macromolecular chain. Its molecular structure was characterized by ¹H NMR, FTIR, and UV-Vis spectroscopy. Photopolymerization of tripropylene glycol diacrylate and trimethylolpropane triacrylate initiated by polybenzoxazine, benzoxazine, and benzophenone was studied by real time FTIR spectroscopy. The results obtained are discussed.     

Synthesis of novel polydiazocine for electroactive materials based on diazocine

In this study, we successfully designed and synthesized a novel class of ladder‐type polymer polydi‐benzoyl[b,f][1,5]diazocine ( PBDA‐a ) and polydimethoxybenzoyl[b,f][1,5]diazocines ( PBDA‐b ) for novel electrochemical actuators via one‐pot polymerization. The structure of polymers was characterized using ¹³C NMR, FTIR and MALDI‐TOF. Both of the polydiazocines exhibited high thermal stability and excellent solubility in common solvent. Molecular conformation studies using the density functional theory method revealed that the conformational structure of PBDA‐a preferred to display zigzag conformation while PBDA‐b display helix conformation. The mechanism of the polydiazocine synthesis is assumed to condensation polymerization proceeding by an unprecedented cyclization of the isocyanate with the neighboring acyl group, followed by the dimerization to form diazocine ring. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4694–4701     

Ring-opening polymerization of 1,4,8-trioxaspiro-[4.6]-9-undecanone: A route to novel molecular architectures for biodegradable aliphatic polyesters

The ring-opening polymerization of 1,4,8-trioxaspiro-[4.6]-9-undecanone (TOSUO) initiated by aluminum isopropoxide, Al(OⁱPr)₃, is typically “living” and allows random and block copolyesters of predictable molecular weight and composition to be prepared. Deacetalization of the polyester chains is complete, and reduction of the accordingly formed ketone groups into hydroxyl groups as well. No chain scission is observed when these two derivatization reactions are carried out. The potential of these novel functional aliphatic polyesters has been discussed as drug colloidal vectors and macroinitiators for the synthesis of biodegradable and biocompatible comb, graft and even hyperbranched polymers.     

Synthesis of clay nanocomposite materials by light-induced crosslinking polymerization

Different types of nanocomposite materials have been synthetized within seconds at ambient temperature, by photoinitiated crosslinking polymerization of epoxy, vinyl ether and acrylate-based resins containing a small amount (3 wt%) of an organoclay filler. The curing process was followed quantitatively by infrared spectroscopy through the decrease upon UV exposure of the IR bands characteristic of the functional groups. The silicate nanoparticles were found to have no effect on the polymerization kinetics. The UV-cured nanocomposites proved to be more flexible and impact resistant than the corresponding microcomposites. This method of synthesis of nanocomposites presents the advantages associated with the UV-curing technology, namely a solvent-free resin transformed rapidly at ambient temperature into a chemically resistant material, with a minimum consumption of energy.