Transition metal catalyzed cationic polymerizations

Certain complexes of platinum, rhodium, iridium and cobalt are capable of initiating cationic vinyl and ring-opening polymerizations in the presence of a Si-H containing cocatalyst. An investigation has shown that two distinctly different mechanisms are involved, however, in both cases cationic polymerization can be explained by the formal attack of an electrophilic silicon species on the monomers. Since the transition metal complexes listed above also are catalysts for hydrosilation reactions, it is possible to carry out simultaneous cationic polymerizations and hydrosilation reactions to prepare novel and interesting polymers and oligomers.     

Enantioselective, transition metal catalyzed cycloisomerizations

This review illustrates enantioselective transition-metal promoted skeletal rearrangements of polyunsaturated substrates possessing olefin, alkyne or allene functions. These processes are classified according to the number of carbon atoms involved in the cyclization, from (1C+1C) to (2C+2C+2C) or (2C+5C) cyclizations. Thus, for instance, (1C+1C) processes are typified notably by Alder-ene type reactions taking place mainly under palladium and rhodium catalysis, in the presence of chiral phosphorus ligands. Also, rhodium, platinum, and gold promoted insertions of unsaturated carbon-carbon bonds into C-H bonds belong to this class. For each class of reactions or substrate type the best ligand-metal pairs are highlighted. Unfortunately, unlike other transition metal promoted reactions, the mechanisms of chiral induction and stereochemical pathways have not been established so far in any of these reactions. In only a few instances, qualitative heuristic models have been tentatively proposed. Although the available stereochemical information is systematically given here, the paper focuses mainly on synthetic aspects of enantioselective cycloisomerizations.     

过渡金属促进的固相偶联反应

固相有机合成作为组合化学的基石近几年发展很快,本文就1994～1999年被过渡金属促进的固相偶联反应进行了综述。     

The transition metal catalyzed hydroboration of enamines

The addition of catecholborane (HBcat, cat = 1,2-O₂C₆H₄) to 9-vinylcarbazole can give either the branched or linear hydroboration product depending upon the judicious choice of metal catalyst used in these reactions. Analogous reactions with pinacolborane (HBpin, pin = 1,2-O₂C₂Me₄) and HBBzpin (Bzpin = 1,2-O₂C₂Ph₄) using catalytic amounts (5 mol%) of either Rh(acac)(dppb) or [Cp^∗IrCl₂]₂ gave the linear hydroboration product selectively. Hydroborations of 1-pyrrolidino-1-cyclopentene and 1-pyrrolidino-1-cyclohexene were complicated by a competing dehydrogenative borylation pathway. The branched isomer was not observed to any significant extent in these reactions, suggesting that the directing effect of the nitrogen atom is negligible. Although catalyzed additions of HBcat to 1-vinyl-2-pyrrolidinone gave complicated product distributions arising from competing reactions, addition of HBpin effectively generated the corresponding linear hydroboration product in good yields.     

Iodide effects in transition metal catalyzed reactions

The unique properties of I(-) allow it to be involved in several different ways in reactions catalyzed by the late transition metals: in the oxidative addition, the migration, and the coupling/reductive elimination steps, as well as in substrate activation. Most steps are accelerated by I(-)(for example through an increased nucleophilicity of the metal center), but some are retarded, because a coordination site is blocked. The "soft" iodide ligand binds more strongly to soft metals (low oxidation state, electron rich, and polarizable) such as the later and heavier transition metals, than do the other halides, or N- and O-centered ligands. Hence in a catalytic cycle that includes the metal in a formally low oxidation state there will be less tendency for the metal to precipitate (and be removed from the cycle) in the presence of I(-) than most other ligands. Iodide is a good nucleophile and is also easily and reversibly oxidized to I(2). In addition, I(-) can play key roles in purely organic reactions that occur as part of a catalytic cycle. Thus to understand the function of iodide requires careful analysis, since two or sometimes more effects occur in different steps of one single cycle. Each of these topics is illustrated with examples of the influence of iodide from homogeneous catalytic reactions in the literature: methanol carbonylation to acetic acid and related reactions; CO hydrogenation; imine hydrogenation; and C-C and C-N coupling reactions. General features are summarised in the Conclusions.     

Synthesis of phenylene–silylene–ethylene polymers via transition metal complex catalyzed hydrosilylation polymerization

New phenylene–silylene–ethylene polymers have been successfully synthesized using platinum–divinylsiloxane or rhodium and iridium siloxide complex‐catalysed polyhydrosilylation of divinylsubstituted carbosilanes with dihydrocarbosilanes or intermolecular hydrosilylation of new hydrovinylcarbosilane. Polycarbosilanes have been obtained with high molecular weights. They seem to be potential parent substances for future applications as preceramic and membrane materials. Copyright © 2005 John Wiley & Sons, Ltd.     

Hydrophosphination of alkoxyalkenes catalyzed by transition metal complexes

Diphenylphosphine adds to alkyl vinyl ethers in the presence of Ni(II) and Pd(II) complexes with a high regioselectivity, leading to exclusive formation of the corresponding Markownikoff adducts which were isolated as 1-alkoxyalkyl(diphenyl)phosphine oxides via oxidation with hydrogen peroxide.     

Enantioselective cyclizations of silyloxyenynes catalyzed by cationic metal phosphine complexes

The discovery of complementary methods for enantioselective transition metal-catalyzed cyclization with silyloxyenynes has been accomplished using chiral phosphine ligands. Under palladium catalysis, 1,6-silyloxyenynes bearing a terminal alkyne led to the desired five-membered ring with high enantioselectivities (up to 91% ee). As for reactions under cationic gold catalysis, 1,6- and 1,5-silyloxyenynes bearing an internal alkyne furnished the chiral cyclopentane derivatives with excellent enantiomeric excess (up to 94% ee). Modification of the substrate by incorporating an α,β-unsaturation led to the discovery of a tandem cyclization. Remarkably, using silyloxy-1,3-dien-7-ynes under gold catalysis conditions provided the bicyclic derivatives with excellent diastereo- and enantioselectivities (up to >20:1 dr and 99% ee).     

Synthesis and addition polymerization of vinylbenzyl transition metal compounds

Summary The synthesis of three vinylbenzyl complexes (n⁵-C₅H₅)-M(CO)_n(CH₂C₆H₄CH=CH₂), [1), M=Mo, n=3; (2), M=W, n=3; (3), M=Fe, n=2] is reported. Complexes (1) and (2) have been copolymerized with monomers, such as styrene, methyl methacrylate, andN-vinyl-2-pyrrolidone, in benzene using azoisobutyronitrile as initiator. The rates of incorporation of (2) into copolymers with styrene and methyl methacrylate were the same as the rate of incorporation of the organic monomer. The homopolymerization of (2) was also carried out. Polymerizations occurred satisfactorily except for the copolymerization of (1) with styrene, where little incorporation of the organometallic monomer occurred.     

Surface promoted redox cationic polymerization of epoxy monomers catalyzed by silver salts

The first example of a one‐component room temperature curing redox cationic polymerization for metal surfaces is described. A weak Lewis acid (Ag⁺) is used as a latent catalyst to likely generate a much stronger one (Fe²⁺/Fe³⁺ or Cu²⁺) at the bond line interface. Such a process has been demonstrated for 3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexane carboxylate using [Ag(1,5‐cyclooctadiene)₂]SbF₆ with the polymerization monitored most conveniently by fourier transform infrared spectroscopy (FTIR). This system, however, demonstrates a relatively low adhesive strength even following curing for 24 h. Higher bond strengths were achieved using mixtures with other cationically polymerizable monomers (vinyl ethers, tetrahydrofuran (THF), oxetanes). Factors considered for optimization of the rates and extent of reaction were the concentrations of a vinyl ether comonomer and [AgL_n]X, the nature of the counterion (X), and of the ligand (L). The performance of the Ag(I) system was compared to that of Cu(I) and various organic cations and the activity of the redox cationic polymerizations on a range of metallic (iron, copper, and aluminium) and nonmetallic (glass and various plastics) substrates was studied. A relatively high glass transition temperature was recorded for the optimized model system and the bonding strength at elevated temperature (150–200 °C) following a room temperature cure was found to be attractive compared to selected model anaerobic acrylate compositions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

过渡金属催化C-H键活化的硅氢化反应

过渡金属催化C-H键活化的硅氢化反应在材料科学和合成化学领域里具有重要意义。有机硅化合物在纺织、橡胶、机械、日化等材料领域有广泛应用,此外,它还是重要的有机合成中间体,作为亲核试剂应用到Hiyama偶联反应,反应具有经济、高效、环境友好等特点。近些年来,很多课题组在该领域进行研究,并取得了一定的成果_^[1]。我们将从过渡金属催化芳基/烷基C-H键活化的硅氢化反应出发,介绍近些年在此领域的研究进展。     

Reductive depolymerization of plastics catalyzed with transition metal complexes

1. Download : Download high-res image (257KB)
2. Download : Download full-size image

     

Synthesis of 2-arylbenzimidazoles catalyzed by transition metal nitrates

A simple and practical procedure for synthesis of 2-arylbenzimidazoles by a one-pot condensation of o-phenylenediamine with aromatic aldehydes in the presence of a catalytic amount of M(NO₃)₂·6H₂O (M = Mn, Fe, Co, Ni, Cu) in ethanol at room temperature is described. Major advantages of this practical procedure are use of a readily available catalyst, high yields, short reaction times, and simplicity of the reaction and workup.     

Hydroamination of conjugated dienes catalyzed by transition metal complexes

The review summarizes published data on the hydroamination of 1,3-dienes with various primary and secondary amines, ammonia, and ammonium salts of mineral acids in the presence of transition metal complexes under homogeneous conditions. The effects of the nature of metal, ligand, initial diene, and amine and reaction conditions on the selectivity of hydroamination are considered, and possible reaction mechanisms are discussed.     

Transition metal-catalyzed tandem isomerization and cationic polymerization of allyl ethers. II. Structural and mechanistic studies

In the presence of organosilanes, dicobalt octacarbonyl catalyzes the polymerization of alkyl allyl ethers to give high molecular weight polymers. This article reports the results of a detailed mechanistic study of this new polymerization reaction. The evidence obtained in this study supports a stepwise process involving first, the reaction of dicobalt octacarbonyl with an organosilane to form HCo(CO)₄ and R₃SiCo(CO)₄. In subsequent steps, HCo(CO)₄ isomerizes the allyl ether to a 1-propenyl ether and then this compound is polymerized by the formal transfer of a silyl cation from R₃SiCo(CO)₄. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1985–1997, 1997     

Novel cationic rare earth metal alkyl catalysts for precise olefin polymerization

This mini‐review provides recent progress in the synthesis of rare earth metal dialkyl complexes and their application as highly efficient and regio‐/stereoselective catalysts in the coordination‐insertion (co)polymerization of olefins such as styrene, isoprene, 1,3‐cyclohexadiene, and ocimene. Through modifying the coordination atom, the ligand skeleton, and the substitutent on the skeleton of the chelating ligand, tuning the electron density and the steric environment around the rare earth metal center, the precise control of the activity and regio‐/stereoselectivity of the (co)polymerization as well as the comonomer incorporation and sequence distribution of the resulting copolymers are achieved. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2271–2280