Neutron reflection studies at polymer-polymer interfaces

The application of the neutron reflectivity technique to the study of polymer-polymer interfaces is described and several examples given. The high resolution of the technique allows the details of the interface during early stages of mixing to be resolved for a partially miscible blend. The results are discussed in terms of recent theories.     

Selective adsorption of block copolymers on patterned surfaces

Adsorption of copolymers on patterned surfaces is studied using lattice modeling and multiple Markov chain Monte Carlo methods. The copolymer is composed of alternating blocks of A and B monomers, and the adsorbing surface is composed of alternating square blocks containing C and D sites. Effects of interaction specificity on the adsorbed pattern of the copolymer and the sharpness of the adsorption transition are investigated by comparing three different models of copolymer-surface interactions. Analyses of the underlying energy distribution indicate that adsorption transitions in our models are not two-state-like. We show how the corresponding experimental question may be addressed by calorimetric measurements as have been applied to protein folding. Although the adsorption transitions are not "first order" or two-state-like, the sharpness of the transition increases when interaction specificity is enhanced by either including more attractive interaction types or by introducing repulsive interactions. Uniformity of the pattern of the adsorbed copolymer is also sensitive to the interaction scheme. Ramifications of the results from the present minimalist models of pattern recognition on the energetic and statistical mechanical origins of undesirable nonspecific adsorption of synthetic biopolymers in cellular environments are discussed.     

Adsorption of semiflexible block copolymers on homogeneous surfaces

We present the results of extensive numerical off-lattice Monte Carlo simulations of semiflexible block-copolymer chains adsorbed onto flat homogeneous surfaces. We have compared the behavior of several chain structures, such as homopolymers, diblocks, (A(alpha)B(alpha)) block copolymers, and random heteropolymers. In all the cases studied, we have found the adsorption process to be favored with an increase of the chain rigidity. Particularly, the adsorption of diblock structures becomes a two-step process characterized by two different adsorbing temperatures that depend on the chain stiffness kappa, the chain length N, and the adsorbing energies epsilon(A) and epsilon(B). This twofold adsorbing process changes to a single one for copolymers of reduced block size alpha. Each block of the stiff copolymer chain is found to satisfy the classical scaling laws for flexible chains, however, we found the scaling exponent phi to depend on the chain stiffness. The measurement of the radius of gyration exhibits a typical behavior of a polymer chain composed of Nl(p) blobs whose persistence length follows l(p) approximately (kappa/k(B)T)(0.5) for large stiff chains.     

X-ray scattering studies of surfaces and interfaces

Here we shall briefly review the basics and some applications of x-ray specular reflectivity and diffuse scattering techniques. These x-ray scattering techniques are uniquely suited to study of the structure of surfaces and interfaces at atomic resolutions as they are nondestructive and can probe even interfaces which are buried. The study of structure of surfaces and interfaces is not only required in understanding physics in reduced dimensions but is also essential in developing technologically important materials.     

Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces

Functionalized alkanethiols have been self-assembled on gold to modify the wetting properties of the surface and promote or hinder the adsorption of block copolymers containing both hydrophobic and hydrophilic blocks. X-ray photoelectron spectroscopy (XPS) studies of spin-coated polyethylene-block-poly(ethylene oxide) (PE-b-PEO) copolymers on 16-mercaptohexadecanoic acid (MHDA)-, octadecanethiol (ODT)-, and 1H,1H,2H,2H-perfluorodecanethiol (PFDT)-covered surfaces have been performed. In the case of an 80 wt % PEO block copolymer, spin-coating on a gold surface precovered with MHDA results in a polymer film thick enough to completely attenuate Au 4f photoelectrons; spin-coating on the more hydrophobic ODT and PFDT monolayers leads to significantly thinner polymer films and incomplete attenuation of the gold photoelectrons. The opposite results are observed when a 20 wt % PEO block copolymer is used. Angle-resolved XPS studies of the 80 wt % PEO block copolymer spin-coated onto an MHDA-covered surface indicate that the PE blocks of the polymer segregate to the near-surface region, oriented away from the hydrophilic carboxylic acid tails of the monolayers; the surface concentration of PE is further enhanced by annealing at 90 degrees C. Microcontact printing and dip-pen nanolithography have been used to pattern gold surfaces with MHDA, and the surfaces have been backfilled with ODT or PFDT, such that the unpatterned regions of the surface are covered with hydrophobic monolayers. In the case of backfilling with PFDT, spin-coating the 80 wt % PEO copolymer onto these patterned surfaces and subsequent annealing results in the block copolymer preferentially adsorbing on the MHDA-covered regions and forming well-defined patterns that mimic the MHDA pattern, as determined by scanning electron microscopy and atomic force microscopy. Significantly worse patterning, characterized by micron-sized polymer droplets, results when the surface is backfilled with ODT instead of PFDT. Using PFDT and MHDA, polymer features having widths as small as 500 nm have been formed. These studies demonstrate a novel method to pattern block copolymers with nanoscale resolution.     

WAXS studies on block copolymers of ethylene and propylene

Wide-angle X-ray scattering from presumed block copolymers of polypropylene (PP) and ethylene-propylene copolymer (EPR), i.e., PP-EPR and PP-EPR-PP, synthesized by sequential polymerization with δ-TiCl₃? Et₂AlCl, was examined and compared with WAXS of mechanical blends and chain-transfer mixtures of PP and EPR with comparable compositions. The peak at 2θ = 20° for both the copolymers and the mixtures was attributed to the γ modification of PP in EPR. A strong variation in the ratio of diffraction intensities I₀₄₀/I₁₁₀ of PP in block copolymers and mixtures was explained in terms of crystallite growth in different directions. Analysis of the patterns and calculation of crystallinity, crystallite size, and lattice parameters led to the conclusion that block structure existed in the prepared copolymers.     

Diverse access to artificial superhydrophobic surfaces using block copolymers

The creation of an artificial superhydrophobic surface with micro- and nanostructures has been demonstrated using a block copolymer micelle solution and silica nanoparticles. The unique technique of a nanoparticle-supported micelle stabilization together with changes in the solvent power guarantees the precise morphology control of certain block copolymer-mediated surfaces. The approaches presented here provide a new strategy for the fabrication of a wettability-controlled organic-inorganic hybrid or organic coatings.     

The dramatic effect of architecture on the self-assembly of block copolymers at interfaces

Dramatic morphological changes are observed in the Langmuir-Blodgett (LB) film assemblies of poly(ethylene glycol)-b-(styrene-r-benzocyclobutene) block copolymer (PEG-b-(S-r-BCB)) after intramolecular cross-linking of the S-r-BCB block to form a linear-nanoparticle structure. To isolate architectural effects and allow direct comparison, the linear block copolymer precursor and the linear-nanoparticle block copolymer resulting from selective intramolecular cross-linking of the BCB units were designed to have exactly the same molecular weight and chemical composition but different architecture. It was found that the effect of architecture is pronounced with these macromolecular isomers, which self-assemble into dramatically different surface aggregates. The linear block copolymer forms disklike surface assemblies over the range of compression states, while the linear-nanoparticle block copolymer exhibits long (>10 microm) wormlike aggregates whose length increases as a function of increasing cross-linking density. It is shown that the driving force behind the morphological change is a combination of the altered molecular geometry and the restricted degree of stretching of the nanoparticle block because of the intramolecular cross-linking. A modified approach to interpret the pi-A isotherm, which includes presence of the block copolymer aggregates, is also presented, while the surface rheological properties of the block copolymers at the air-water interface provide in-situ evidence of the aggregates' presence at the air-water interface.     

Small-angle x-ray scattering studies on epoxidized butadiene-styrene block copolymers

Small-angle x-ray scattering (SAXS) and scanning electron microscopy (SEM) investigations for epoxidized butadiene-styrene (BS) block copolymers were performed. For unepoxidized copolymers, the SAXS curve exhibits a maximum which indicates that the copolymer has heterogeneity domain morphology. Using the standard theory for a two-phase system, mean distances between domains, the correlation length l _p , and the thickness of the phase boundary were calculated from the SAXS data. It was found that the epoxidation of BS copolymers decreases the ability of the copolymer to separate the individual components. As the content of the epoxide groups increases, the dimensions of the domains decrease until they disappear, the boundary between domains and the matrix becomes less and less definite, and the copolymer composes a homogeneous system. The disappearance of the two-phase structure of the BS copolymers indicates an increase in the compatibility of polystyrene and epoxidized polybutadiene. According to the method of Van Krevelen, the solubility parameters of polystyrene and epoxypolybutadiene were calculated. Small differences between these parameters support the conclusions drawn from the SAXS investigations     

Wetting of heterogeneous surfaces of block copolymers containing fluorinated segments

 The wetting of well-characterized heterogeneous surfaces of block copolymers has been studied by low-rate dynamic contact angle measurements using axisymmetric drop-shape analysis. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the roughness, the heterogeneity and the chemical composition of the surfaces. By changing the block length of polysulfone and semifluorinated polyester segments in the block copolymers, the surface heterogeneity of thin films prepared on silicon wafers could be controlled. Tapping-mode AFM measurements showed that soft, hydrophobic domains of varying size on the submicrometer length scale were obtained on these surfaces (60–250 nm). The mean roughness was of the order of several nanometers. The results of the contact angle measurements showed that neither roughness nor heterogeneity had a significant effect on the advancing contact angle of water, at the scale of the features present; however, the contact angle hysteresis increased with increasing percentage of the soft domains. We assume that liquid retention by the solid upon retraction of the three-phase line is the main cause for the observed increase in contact angle hysteresis. Concerning the molecular composition of these block copolymer surfaces, angle-resolved XPS analysis showed a surface segregation of fluorine within the surface region. A direct correlation was found between the fluorine content of the block copolymer surfaces and the advancing contact angle of water. Received: 26 May 2000 Accepted: 3 January 2001     

Small-angle neutron scattering by two-component particles: Application to block copolymers

General equations for small-angle neutron scattering are derived for block copolymers in dilute solution. The effects of excluded volume and polydispersity are examined. The applicability of the method of variable contrast to such systems is discussed.     

Dissipative particle dynamics study on the interfaces in incompatible A/B homopolymer blends and with their block copolymers

Dissipative particle dynamics, a simulation technique appropriate at mesoscopic scales, has been applied to investigate the interfaces in immiscible binary A/B homopolymer blends and in the ternary systems with their block copolymers. For the binary blends, the interfacial tension increases and the interface thickness decreases with increasing Flory-Huggins interaction parameter chi while the homopolymer chain length is fixed. However, when the chi parameter and one of the homopolymer chain length is fixed, increasing another homopolymer chain length will induce only a small increase on interfacial tension and slight decrease on interface thickness. For the ternary blends, adding the A-b-B block copolymer will reduce the interfacial tension. When the mole number of the block copolymer is fixed, longer block chains have higher efficiency on reducing the interfacial tension than the shorter ones. But for the block copolymers with fixed volume fraction, shorter chains will be more efficient than the longer ones on reducing the interfacial tension. Increasing the block copolymer concentration reduces interfacial tension. This effect is more prominent for shorter block copolymer chains.     

Polyethylene-based polyurethane copolymers and block copolymers

Low molecular weight hydroxy terminated polyethylene (HTPE) containing on average an ethyl group every 16–18 carbon atoms, and a hydroxy functionality of 2.6, has been used to prepare polyurethane copolymers and block copolymers which have good solvent resistance. The polymers show somewhat complicated thermal behavior, including T_g's at around −40°C due to the HTPE and diffuse endotherms between 40 and 60°C. The simple copolymers, containing only the polyol and a diisocyanate, show infrared evidence for two phases in the case where CHDI (trans-1,4-diisocyanatocyclohexane) was used, and poorer phase separation where other diisocyanates were used. Dynamic mechanical spectra show very broad tan delta transitions for the copolymers in the range of -9 to −23°C. All the polymers exhibit another transition in the G” curve above room temperature. SAXS reveals a microphase separated structure at 30°C for the simple copolymers which increases in spacing, then disappears in the 60–70°C range. With cooling, the microphase separated structure reappears readily for the CHDI-based copolymer, while its reappearance shows a hysteresis resulting from rate effects for the other copolymers.     

Neutron and light scattering studies of polymer blends and block copolymers

The structure of compatible polymer mixtures and its temperature dependence can be well described in many cases by the mean-field approximation. Deviations with regard to the temperature dependence of the correlation length of concentration fluctuations can be explained by taking into account the spatial structure of the interaction potential. Concentration fluctuations and the microphase separation in diblock copolymers are in good agreement with theories based on the random phase approximation. In the two-phase region the temperature dependence of the scattered X-ray or neutron intensity is governed by the difference in the thermal expansion coefficients of the two components of the diblock copolymer. Photon correlation spectroscopy (PCS) yields valuable information on the concentration dependence of the mutual diffusion coefficient D_AB.     

Neutron reflection and small-angle neutron scattering studies of a fluorocarbon telomer surfactant

Dilute aqueous phase behavior of a novel tris(hydroxymethyl)acrylamidomethane (THAM)-derived telomer bearing a perfluorohexyl hydrophobic chain, F6THAM6, has been investigated. Fluorinated polyhydroxy surfactants of this kind find use in emerging biomedical applications. Neutron reflection (NR) and drop volume surface tension (DVT) methods have been used to determine the critical micelle concentration (cmc=4.7 x 10(-4) mol x dm(-3)) and surface adsorption parameters (at the cmc NR gives a molecular area a(cmc)=67.4 and 62 A(2) and surface excess gamma(cmc)=2.46 x 10(-6) mol x m(-2)). The aggregation structures were determined by small-angle neutron scattering (SANS), indicating globular (polydisperse spheres) micelles of radius approximately 30 A are present. These findings are compared with literature on surfactants with related structures, to identify how the unusual molecular structure of F6THAM6 affects surfactant properties.     

Neutron reflection from interfaces with biological and biomimetic materials

During the past decade, neutron reflectivity has increasingly become an important technique for the characterization of biological and biomimetic thin films. Advancements in instrumentation, sample environment and measurement protocols now make it possible to obtain Angstrom-level information about the composition of these materials along the axis perpendicular to the plane of the membrane. A newly developed phase-sensitive neutron reflectivity technique now allows direct inversion of the reflectivity data to obtain unique compositional depth profiles of the films. This review concentrates on the development of these neutron reflectivity methods for the study of peptide and protein interactions with model membranes.     

Smectic order induced at homeotropically aligned nematic surfaces: a neutron reflection study

Neutron reflection was used to measure the buildup of layers at a solid surface as the smectic phase is approached from higher temperatures in a nematic liquid crystal. The liquid crystal was 4-octyl-4'-cyanobiphenyl (8CB), and the solid was silicon with one of five different surface treatments that induce homeotropic alignment: (i) silicon oxide; (ii) a cetyltrimethylammonium bromide coating; (iii) an octadecyltrichlorosilane monolayer; (iv) an n-n-dimethyl-n-octadecyl-3- aminopropyltrimethyloxysilyl chloride monolayer; and (v) a lecithin coating. The development of surface smectic layers in the nematic phase of 8CB was followed by measuring specular reflectivity and monitoring the pseudo-Bragg peak from the layers. The scattering data were processed to remove the scattering from short-ranged smecticlike fluctuations in the bulk nematic phase from the specular reflection. The pseudo-Bragg peak at scattering vector Q approximately 0.2 A(-1) therefore corresponded to the formation of long-range smectic layers at the surface. The amplitude of the smectic density wave decayed with increasing distance from the surface, and the characteristic thickness of this smectic region diverged as the transition temperature was approached. It was found that the characteristic thickness for some of the surface treatments was greater than the correlation length in the bulk nematic. The different surfaces gave different values of the smectic order parameter at the surface. This suggests that the interaction with the surface is significantly different from a "hard wall" which would give the same values of the smectic order parameter and penetration depths similar to the bulk correlation length. Comparison of the different surfaces also suggested that the strength and range of the surface smectic ordering may be varied independently.