苯乙烯噻吩之光敏化亲核性加成反应(英文)

苯乙烯噻吩经1,4二氰苯之光敏化作用所产生之阳离子自由基与氨进行高产率且具位置选择性之加成反应,可得单一产物1-胺基-1-(对-取代基苯基)-2-噻吩-2-基乙烷.     

A Soluble Donor–Acceptor Double-Cable Polymer: Polythiophene with Pendant Fullerenes

Summary.  We report the synthesis and the spectroscopic properties of a novel soluble thiophene-based copolymer carrying pendant fullerene moieties (donor–acceptor double-cable polymer). Photoinduced absorption (PIA) experiments on spin cast films reveal a photoinduced electron transfer from the polythiophene chain onto the fullerene moieties. The performance of photovoltaic devices produced with this copolymer is also discussed. Corresponding author. E-mail: antonio.cravino@jku.at Received August 16, 2002; accepted (revised) August 26, 2002     

Influence of intermolecular orientation on the photoinduced charge transfer kinetics in self-assembled aggregates of donor-acceptor arrays

The kinetics of photoinduced charge transfer reactions in covalently linked donor-acceptor molecules often undergoes dramatic changes when these molecules self-assemble from a molecular dissolved state into a nanoaggregate. Frequently, the origin of these changes is only partially understood. In this paper, we describe the intermolecular spatial organization of three homologous arrays, consisting of a central perylene bisimide (PERY) acceptor moiety and two oligo(p-phenylene vinylene) (OPV) donor units, in nanoaggregates and identify both face-to-face (H-type) and slipped (J-type) stacking of the OPV and PERY chromophores. For the J-type aggregates, short intermolecular OPV-PERY distances are created that give rise to a charge-transfer absorption band. The proximity of the donor and acceptor groups in the J-type aggregates enables a highly efficient photoinduced charge separation with a rate (k(cs) > 10(12) s(-1)) that significantly exceeds the rate of the intramolecular charge transfer of the same compounds when molecularly dissolved, even in the most polar media. In the H-type aggregates, on the other hand, the intermolecular OPV-PERY distance is not reduced compared to the intramolecular separation, and hence, the rates of the electron transfer reactions are not significantly affected compared to the molecular dissolved state. Similar to the forward electron transfer, the kinetics of the charge recombination in the aggregated state can be understood by considering the different interchromophoric distances that occur in the H- and J-type aggregates. These results provide the first consistent rationalization of the remarkable differences that are observed for photoinduced charge-transfer reactions of donor-acceptor compounds in molecularly dissolved versus aggregated states.     

In Situ Synthesis of Block Copolymer Nano-assemblies by Polymerization-induced Self-assembly under Heterogeneous Condition

Controlled synthesis of amphiphilic block copolymer nanoparticles in a convenient way is an important and interest topic in polymer science. In this review, three formulations of polymerization-induced self-assembly to in situ synthesize block copolymer nanoparticles are briefly introduced, which perform by reversible addition-fragmentation chain transfer(RAFT) polymerization under heterogeneous conditions, e.g., aqueous emulsion RAFT polymerization, dispersion RAFT polymerization and especially the recently proposed seeded RAFT polymerization. The latest developments in several selected areas on the synthesis of block copolymer nano-assemblies are highlighted.     

Low-field CIDNP study of photoinduced electron transfer reactions

Chemically induced dynamic nuclear polarization in low magnetic field (low-field CIDNP) has been detected and studied in photoinduced electron transfer reactions in the polar solvent acetonitrile. For the radical-ion reactions two different approaches to interpret the low-field CIDNP are demonstrated: interpretation of the low-field CIDNP sign on the basis of quality relationships, and numerical calculations of the CIDNP field dependence. Analysis shows that low-field CIDNP in these reactions is sensitive to the value of the electron exchange interactions in radical-ion pairs.     

Mechanism of scandium ion catalyzed Diels-Alder reaction of anthracenes with methyl vinyl ketone

Rates of Diels-Alder cycloadditions of anthracenes with methyl vinyl ketone (MVK) are accelerated significantly by the presence of scandium triflate [Sc(OTf)3]. Sc(OTf)3 also promotes photoinduced electron-transfer reactions from various electron donors to MVK significantly. Comparison of the promoting effect of Sc(OTf)3 in photoinduced electron-transfer reactions of MVK with the catalytic effect of Sc(OTf)3 in the Diels-Alder reaction of 9,10-dimethylanthracene with MVK has revealed that the MVK-Sc(OTf)3 complex is a reactive intermediate in both the Diels-Alder and photoinduced electron-transfer reactions. The observed second-order rate constants of the Sc(OTf)3-catalyzed Diels-Alder reactions of anthracenes with MVK are by far larger than those expected from the observed linear Gibbs energy relation for the Diels-Alder reactions of anthracenes with stronger electron acceptors than MVK, which are known to proceed via electron transfer. This indicates that the Sc(OTf)3-catalyzed Diels-Alder reactions of anthracenes with MVK does not proceed via an electron-transfer process from anthracences to the MVK-Sc(OTf)3 complex.     

Temperature dependence of photoinduced electron transfer in hydrogen-bonded donor–acceptor systems

We have studied the temperature dependence of photoinduced electron transfer (PET) reactions in three hydrogen-bonded donor–acceptor systems in the range 220–298 K. For the hydrogen-bonded system in the normal region, the PET rate constant was found to increase with increase in temperature. For the two systems in the inverted region, the rate constants were nearly independent of temperature. We have analyzed the results using electron transfer theories.     

PET modulated fluorescent sensing from the BF2 chelated azadipyrromethene platform

A convergent building block synthesis has been applied to new off/on photoinduced electron transfer (PET) modulated fluorescent sensors which are based on a BF(2) chelated tetraarylazadipyrromethene platform and operate in the biomedically important red region of the visible spectrum. Incorporation of diethylamine and morpholine receptors facilitates off/on microenvironment polarity and pH sensing. Aqueous formulation and in vitro cellular imaging demonstrates their potential for intracellular sensing.     

Synthesis and photophysical properties of conjugated polymers with pendant 9,10-anthraquinone units

We have synthesized and investigated the photophysical properties of a series of electron-donor conjugated copolymers with pendant electron-acceptor units. The copolymers consist of diethynyl-1,4-phenylene, fluorene, or phenylene rings alternating with a phenylene unit bearing a pendant 9,10-anthraquinone moiety. The pendant donor-acceptor polymers were designed to have different optical pi-pi* band gaps, while the oxidation potential of the polymer backbone remains approximately constant in the series. The reduction potential of the donor-acceptor polymers is associated with the pendant acceptor units. This leads to the special situation that the electrochemical gap between oxidation and reduction potentials is constant, while the optical band gap decreases, going from PPP, via PPF, to PPE. This design is used to study the effect of the optical gap on the photoinduced electron-transfer reaction that occurs between the main chain electron donor and the pendant acceptor, while the same polymer architecture and energy of the charge separated state are maintained. Fluorescence and photoinduced absorption spectroscopy are used to study the electron transfer following photoexcitation in relation to solvent polarity and in thin solid films. For the fluorene-phenylene alternating copolymer, intramolecular photoinduced electron transfer occurs in the Marcus optimal region.     

Photoinduced electron transfer chemistry of phthalimdes: an efficient tool for CC-bond formation

A collection of intra- and intermolecular photoinduced electron transfer (PET) reactions is presented which all are based on the phthalimide chromophore as the oxidizing species. Electron-donating groups versatile for PET processes are ethers, thioethers, amines, alkenes, arenes, and carboxylates as well as α-trialkylsilyl activated heteroatom-substituents. These reactions can be efficiently applied for the synthesis of five- and six-membered ring heterocycles, medium-sized and macrocyclic products such as macrolides, cyclopeptides, crown ethers or thioethers as well as (from intermolecular processes) Grignard-alike products.     

<Emphasis Type="Italic">In situ</Emphasis> synthesis of block copolymer nano-assemblies by polymerization-induced self-assembly under heterogeneous condition

Controlled synthesis of amphiphilic block copolymer nanoparticles in a convenient way is an important and interest topic in polymer science. In this review, three formulations of polymerization-induced self-assembly to in situ synthesize block copolymer nanoparticles are briefly introduced, which perform by reversible addition-fragmentation chain transfer (RAFT) polymerization under heterogeneous conditions, e.g., aqueous emulsion RAFT polymerization, dispersion RAFT polymerization and especially the recently proposed seeded RAFT polymerization. The latest developments in several selected areas on the synthesis of block copolymer nano-assemblies are highlighted.     

Photobiocatalysis: Activating Redox Enzymes by Direct or Indirect Transfer of Photoinduced Electrons

Biocatalytic transformation has received increasing attention in the green synthesis of chemicals because of the diversity of enzymes, their high catalytic activities and specificities, and mild reaction conditions. The idea of solar energy utilization in chemical synthesis through the combination of photocatalysis and biocatalysis provides an opportunity to make the “green” process greener. Oxidoreductases catalyze redox transformation of substrates by exchanging electrons at the enzyme′s active site, often with the aid of electron mediator(s) as a counterpart. Recent progress indicates that photoinduced electron transfer using organic (or inorganic) photosensitizers can activate a wide spectrum of redox enzymes to catalyze fuel‐forming reactions (e.g., H₂ evolution, CO₂ reduction) and synthetically useful reductions (e.g., asymmetric reduction, oxygenation, hydroxylation, epoxidation, Baeyer–Villiger oxidation). This Review provides an overview of recent advances in light‐driven activation of redox enzymes through direct or indirect transfer of photoinduced electrons.     

Organic/inorganic hybrid vesicles based on a reactive block copolymer

Presented in this communication is a novel hybrid vesicle with a cross-linked polyorganosiloxane wall based on a new reactive block copolymer, poly(ethylene oxide)-block-poly(3-(trimethoxysilyl)propyl methacrylate) (PEO-b-PTMSPMA), which was synthesized by atom transfer radical polymerization. The vesicles were prepared first by self-assembly of the block copolymer in a selective solvent, and then the PTMSPMA block was subjected to hydrolysis and polycondensation reaction to fix vesicle wall in the presence of triethylamine as a catalyst. Transmission electron microscopy, scanning electron microscopy, NMR, and light scattering have been used to characterize the vesicles.     

Some aspects of photochemical systems for direct light-induced hydrogen production

Various possible pathways for photochemical conversion of light energy, including light-induced electron transfer and hydride transfer, are described. Several problems diminishing the photoconversion efficiency as well as side reactions affecting the stability of these systems are discussed. Oxidation of photosensitizers by singlet oxygen as well as attack by OH radicals is supposed to be the main degradation pathway for dyes and for the photoinduced reactions. The stability of viologens (acting as electron transfer agents) is mainly affected by hydrogenation, for which a reaction mechanism is presented. The dependence of rate constants on the free enthalpy of reaction is discussed with respect to quantum yields for light energy conversion. Following this, quantum yields of cyclic water splitting based on diffusion-controlled reactions are very low. Selective catalysis or vectorial processes (with a spatial charge separation) could enhance the quantum yields.     

Synthesis and characterization of a novel main chain oxadiazole-based copolymer for n-type solar cell material

A novel oxadiazole-based copolymer has been successfully synthesized through the palladium-catalyzed cross-coupling polycondensation method.The copolymer P is soluble in common organic solvents.Its structure has characterized by ~1H NMR,~(13)C NMR,gel permeation chromatagraphy (GPC),UV-vis absorbance (Abs) and photoluniminescence (PL) spectroscopy,and cyclic voltammetry (CV).Investigation of its optical properties revealed that it is yellow emitting material,and the electrochemical analysis showed that P was well suited poly (2,5-dioctyloxy-p-phenylenevinylene) (PDOCPV) for photovoltaic devices,so the copolymer P is able to act as an electron acceptor in combination with PDOCPV as the electron donor to quench photoluminescence of the copolymer in the blend,indicative of the efficient photoinduced electron transfer from the PDOCPV to the P.     

Femtosecond-Picosecond Laser Photolysis Studies on Photoinduced Electron Transfer Phenomena in Solutions

Results of our femtosecond-picosecond laser photolysis studies on photoinduced electron transfer phenomena in solutions including exciplex dynamics and its solvent dependences, energy gap dependences of photoinduced charge separation and charge recombination of various geminate ion pairs, mechanisms of chemical reactions via exciplexes and ion pairs, dynamics of photoinduced election transfer in hydrogen bonding complexes, dynamics and mechanisms of photoinduced electron transfer in fixed distance donor acceptor dyads and photosynthetic reaction center models, and mechanisms of electron ejection from solute fluorescent state in polar solutions are summarized and discussed.     

Competition between superexchange-mediated and sequential electron transfer in a bridged donor-acceptor system

The temperature- and solvent-dependence of photoinduced electron-transfer reactions in a porphyrin-based donor-bridge-acceptor (DBA) system is studied by fluorescence and transient absorption spectroscopy. Two competing processes occur: sequential and direct superexchange-mediated electron transfer. In a weakly polar solvent (2-methyltetrahydrofuran), only direct electron transfer from the excited donor to the appended acceptor is observed, and this process has weak temperature dependence. In polar solvents (butyronitrile and dimethylformamide), both processes are observed and the sequential electron transfer shows strong temperature dependence. In systems where both electron transfer processes are observed, the long-range superexchange-mediated process is more than two times faster than the sequential process, even though the donor-acceptor distance is significantly larger in the former case.     

Selective oxygenation of ring-substituted toluenes with electron-donating and -withdrawing substituents by molecular oxygen via photoinduced electron transfer

A ring-substituted toluene with an electron-withdrawing substituent, p-tolunitrile, is oxygenated by molecular oxygen to yield the corresponding aldehyde with tetrafluoro-p-dicyanobenzene as a photocatalyst under photoirradiation with an Hg lamp (lambda > 300 nm). The oxygenation of a ring-substituted toluene with an electron-donating substituent, p-xylene, by molecular oxygen is also achieved with 10-methyl-9-phenylacridinium ion as a photocatalyst under visible light irradiation, yielding p-tolualdehyde exclusively as the final oxygenated product. Both the oxygenation reactions are initiated by photoinduced electron transfer from the ring-substituted toluene to the singlet excited state of the photocatalyst. The reason for the high selectivity in the photocatalytic oxygenation of various toluene derivatives by molecular oxygen is discussed on the basis of the photoinduced electron transfer mechanism that does not involve the autoxidation process (radical chain reactions). The reactive intermediates in the photocatalytic cycle are successfully detected as the transient absorption spectra and the electron spin resonance spectra.     

Surface functionalized nano‐objects from oleic acid‐derived stabilizer via non‐polar RAFT dispersion polymerization

Surface functionalization in a nanoscopic scaffold is highly desirable to afford nano‐particles with diversified features and functions. Herein are reported the surface decoration of dispersed block copolymer nano‐objects. First, side‐chain double bond containing oleic acid based macro chain transfer agent (macroCTA), poly(2‐(methacryloyloxy)ethyl oleate) (PMAEO), was synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization and used as a steric stabilizer during the RAFT dispersion block copolymerization of benzyl methacrylate (BzMA) in n‐heptane at 70 °C. We have found that block copolymer morphologies could evolve from spherical micelles, through worm to vesicles, and finally to large compound vesicles with the increase of solvophobic poly(BzMA) block length, keeping solvophilic chain length and total solid content constant. Finally, different thiol compounds having alkyl, carboxyl, hydroxyl, and protected amine functionalities have been ligated onto the PMAEO segment, which is prone to functionalization via its reactive double bond through thiol‐ene radical reactions. Thiol‐ene modification reactions of the as‐synthesized nano‐objects retain their morphologies as visualized by field emission‐scanning electron microscopy. Thus, the facile and modular synthetic approach presented in this study allowed in situ preparation of surface modified block copolymer nano‐objects at very high concentration, where renewable resource derived oleate surface in the nanoparticle was functionalized. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 263–273     

Synthesis and characterization of benzodioxinone mono-telechelics and their use in block copolymerization

Poly(methyl methacrylate) (PMMA) and poly(ethylene glycol) methyl ether (mPEG)-based monotelechelics were quantitatively prepared by copper (I)-catalyzed azide/alkyne cycloaddition (CuAAC) click reactions using azido-terminated polymers and alkyne functional benzodioxinones. The monotelechelic containing dimethyl moities (2,2-dimethyl-5-(prop-2-yn-1-yloxy)-4H-benzo[d][1,3]dioxin-4-one) was heat-sensitive, whereas the monotelechelic containing diphenyl moieties (2,2-diphenyl-5-(prop-2-yn-1-yloxy)-4H-benzo[d][1,3]dioxin-4-one) was UV light sensitive. Based on the FT-IR, ¹H-NMR, and GPC investigations, the CuAAC click reactions enable the quantitative syntheses of monotelechelics under mild conditions. Moreover, the photosensitive mPEG-based monotelechelic was further utilized for the block copolymer synthesis upon UV-light irradiation. The photoinduced acylation of mPEG monotelechelic consist of (2,2-diphenyl-5-(prop-2-yn-1-yloxy)-4H-benzo[d][1,3]dioxin-4-one) in the presence of hydroxy-terminated poly(epsilon caprolactone) enabled the successful block copolymer formation.