Carboxylic acid anhydrides via Pd-catalyzed carbonylation of aryl halides at atmospheric CO pressure

A convenient method has been developed, which allows for the direct transformation of aryl iodides into the corresponding carboxylic acid anhydrides via Pd-catalyzed carbonylation under atmospheric CO pressure.     

Cobalt-catalyzed low pressure double carbonylation of aryl and secondary benzyl halides

α-Ketoacids can be easily synthesized with satisfactory yields and selectivities by carbonylation of aryl halides and secondary benzyl halides under very mild conditions. The reactions are catalyzed by Co₂(CO)₈ in alcoholic solvents; the presence of a methyl source (dimethyl sulfate or methyl iodide) is necessary for the carbonylation of the aryl halides. Base, temperature and solvent have large effects on the course of the reaction.     

Catalytic systems for carbonylation of aryl halides

Data on the structure and reactivity of the catalytic systems used in the synthesis of arenecarboxylic acids by carbonylation of aryl halides are summarized. Comparative analysis of the catalytic systems on the basis of palladium and cobalt complexes in terms of the mechanism of their action, range of substrates, and synthetic uses is performed. Different aspects of the cobalt-catalyzed carbonylation of aryl halides (activity of the catalytic system, reaction chemo-and regioselectivity) from the viewpoint of the radical anion mechanism of activation of aryl halides are considered.     

Solvent-free palladium-catalyzed CO cross-coupling of (hetero)aryl halides with primary alcohols

A new efficient solvent-free procedure for the CO cross-coupling between (hetero)aryl halides with phenols, primary alkanols, or (hetero)arylmethanols using Pd₂(dba)₃/Bu^tBrettPhos catalytic system is proposed using 23 examples.     

Palladium-catalyzed oxidative carbonylation of alkyl and aryl indium reagents with CO under mild conditions

CO now can react with organoindium reagents. A novel palladium-catalyzed oxidative carbonylation reaction of organoindium reagents by CO gas with desyl chloride as oxidant was developed in supplementation with the classical methods for preparation of carboxylic acid derivatives. Primary, secondary alkyl indium reagents with beta-hydrogens and aryl indium reagents were suitable substrates, and the reaction could be carried out at 60 degrees C under 50 psi CO. Carbonylation of alkyl indium reagents can occur smoothly without additional base. Although the indium reagents were prepared from corresponding Grignard reagents (at low temperature), they displayed full compatibility with various functional groups under the protic reaction conditions. Preliminary mechanistic studies including stoichiometric and catalytic reaction examination provided evidence to support the operation of the mechanism consisted of oxidative addition of deslyl chloride to Pd(0) and quick tautomerization to give a palladium enolate species II (ROPdCl), displacement of the enolate group in II by R(2)OH, followed by CO insertion to give alkoxycarbonyl palladium complex V, which undergoes transmetalation with R(1)(3)In and reductive elimination to afford the product and a Pd(0) species. In this mechanism, the alkoxycarbonyl group was transferred to the palladium center prior to the alkyl group, different from traditional ways initiated from oxidative addition of alkyl halides to a Pd(0) species.     

Palladium-catalyzed carbonylation of aryl, alkenyl, and allyl halides with phenyl formate

Highly efficient palladium-catalyzed carbonylation of aryl, alkenyl, and allyl halides with phenyl formate is reported. This procedure does not use carbon monoxide and affords one-carbon-elongated carboxylic acid phenyl esters in excellent yields. The reaction proceeds smoothly under mild conditions and tolerates a wide range of functional groups including aldehyde, ether, ketone, ester, and cyano groups. Furthermore, a variety of heteroaromatic bromides can be converted to the corresponding phenyl esters in high yields.     

Solvent-free copper-catalyzed N-arylation of amino alcohols and diamines with aryl halides

A simple and mild method for the coupling of aryl halides with amino alcohols and diamines is described. The reactions can be performed under ligand-free and solvent-free conditions, and generate the products in good yield.     

Mechanism of the catalytic carbonylation of aryl halides with a modified cobalt carbonyl

Investigation of the mechanism of the carbonylation of aryl halides in a catalytic system consisting of cobalt carbonyl, terminal olefin oxide, and base showed that this catalytic system activates aryl halides via a radical anion mechanism. The kinetic regularities of the process together with IR spectral data suggest reversible formation of the active catalytic complex under the reaction condition. The complex is a cyclic metal lactone, and it can form not only from olefin oxide but also from its methanolysis product, the corresponding glycol monomethyl ether.     

Microwave-assisted palladium-catalyzed allylation of aryl halides with homoallyl alcohols via retro-allylation

The palladium-catalyzed allylation of aryl halides with homoallyl alcohols via retro-allylation proceeds at 200-250 °C in a toluene-DMF mixed solvent using microwave heating. Even at such high temperatures, the regio- and stereospecificity of the allyl transfer reaction is still satisfactory. The amount of the palladium catalyst can be reduced to 0.5 or 0.05 mol %.     

Recyclable heterogeneous copper oxide on alumina catalyzed coupling of phenols and alcohols with aryl halides under ligand-free conditions

An efficient alumina-supported CuO-catalyzed O-arylation of phenols and aliphatic alcohols with various aryl as well as heteroaryl halides under ligand-free conditions are reported. This protocol provides a variety of diaryl ether and bis-diaryl ether motifs by reacting different aryl/aliphatic halides with differently substituted phenols and saturated alcohols in the presence of a catalytic amount of CuO on alumina and KOH as a base at moderate temperature under nitrogen atmosphere. The described methodology is simple, straightforward and efficient to afford the cross-coupled products in high yields under ligand-free conditions. The explored catalyst is inexpensive, air-stable and recyclable up to three cycles.     

Preparation of N-hydroxysuccinimido esters via palladium-catalyzed carbonylation of aryl triflates and halides

N-Hydroxysuccinimido esters of aromatic carboxylic acids (a.k.a. active esters) can be made using a potentially general, one-step procedure via Pd-catalyzed carbonylation of an aryl triflate or aryl iodide with CO and N-hydroxysuccinimide. Excellent yields (up to 94%) were observed when the reaction was done in DMSO at 70°C and 1 atmosphere of CO pressure.     

An improved Cu-based catalyst system for the reactions of alcohols with aryl halides

The use of 3,4,7,8-tetramethyl-1,10-phenanthroline (Me(4)Phen) as a ligand improves the Cu-catalyzed cross-coupling reactions of aryl iodides and bromides with primary and secondary aliphatic, benzylic, allylic, and propargylic alcohols. Most importantly, by employing this catalyst system, the need to use an excessive quantity of the alcohol coupling partner is alleviated. The relatively mild conditions, short reaction times, and moderately low catalyst loading allow for a wide array of functional groups to be tolerated on both the electrophilic and nucleophilic coupling partners.     

Palladium/di-1-adamantyl-n-butylphosphine-catalyzed reductive carbonylation of aryl and vinyl halides

A general and efficient palladium-catalyzed reductive carbonylation with low catalyst loadings (0.5 mol % Pd or below) has been developed. The formylation of aryl and heteroaryl bromides proceeds smoothly in the presence of palladium/di-1-adamantyl-n-butylphosphine at ambient pressure of synthesis gas to afford the corresponding aromatic aldehydes in good yields and excellent selectivity. In addition, vinyl halides react under similar conditions to form α,β-unsaturated aldehydes in good yield.     

Palladium-catalyzed cross-coupling of cyclopropanols with aryl halides under mild conditions

Intra- and intermolecular palladium-catalyzed cross-coupling of cyclopropanols with aryl halides can be achieved in good yields under mild conditions.     

Ionic liquids as reagents and solvents in conjunction with microwave heating: rapid synthesis of alkyl halides from alcohols and nitriles from aryl halides

We show that using ionic liquids as reagents in conjunction with microwave heating it is possible to prepare primary alkyl halides from the corresponding alcohols rapidly. Using ionic liquids as solvents in conjunction with microwave heating it is possible to prepare aryl nitriles from the corresponding aryl bromides or iodides. The scope and limitations of using microwave-promotion as a tool in these reactions is discussed.     

Reactions of vinyltributylgermanes and aryl halides under Heck conditions

We describe the palladium-mediated reaction of vinyltributylgermanes with aryl halides under Heck conditions. Depending on their degree of substitution, (E)-vinyltributylgermanes preferentially afford either the cine or Z-alkenyl coupled products in moderate yields. Substituents at the allylic position, especially oxygen, impact regio- and stereoselectivity.     

Pd/C: An efficient and reusable catalyst for the synthesis of flavones via carbonylation of aryl halides

This work describes an efficient and mild approach for the synthesis of flavones via catalytic carbonylation of aryl halides with 2‐hydroxyacetophenone using the commercial Pd/C as an efficient, heterogeneous and recyclable catalyst. Under balloon pressure of CO, 0.6 mol% Pd/C is sufficient for moderate yields of flavones for the carbonylation of aryl iodides under phosphine‐free conditions and aryl bromides in the presence of phosphine ligand. The catalyst is easily separable and shows significant recyclability. Moreover, the reaction mechanism was discussed, and a possible mechanism that contains two different cyclisation pathways was proposed.     

Reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions

The study of the reactions of tertiary propargyl alcohols with sodium halides under oxidative conditions is presented. With sodium iodide, α-iodoenones were formed, however, with sodium bromide or chloride the α-haloenones were only formed in low yields under anhydrous conditions. Conversely, upon addition of water to the reaction mixtures, α,α-dibromoketones and α,α-dichloroketones were formed in good yields, but α,α-diiodoketones were not observed.     

Palladium-catalyzed stereo- and regiospecific allylation of aryl halides with homoallyl alcohols via retro-allylation: selective generation and use of sigma-allylpalladium

Treatment of tertiary homoallyl alcohol with aryl halide under palladium catalysis resulted in the transfer of the allyl moiety of the homoallyl alcohol to aryl halide and yielded the corresponding cross-coupling product stereo- and regiospecifically. The transfer process includes retro-allylation, which proceeds via a conformationally regulated six-membered transition state. The retro-allylation can be regarded as a method for the stereo- and regiospecific preparation of sigma-allylpalladium.