Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

Synthesis, characterization and catalytic behavior toward ethylene of cobalt(II) and iron(II) complexes bearing 2-(1-aryliminoethylidene)quinolines

A series of 2-(1-aryliminoethylidene)quinolines (L) were synthesized and used as bidentate N^N ligands in coordinating with metal (cobalt and iron) chlorides to form complexes of the type LMCl₂, cobalt(II) (Co1-Co5) and iron(II) (Fe1-Fe5). All organic compounds and metal complexes were fully characterized, and the molecular structures of the representative complexes Co3·DMF and Fe4·DMF were confirmed as distorted bipyramidal geometry at the metal by single-crystal X-ray diffraction. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO) under 10 atm ethylene, all complexes showed high activities in ethylene dimerization with activities of up to 1.82 × 10⁶ g mol⁻¹ (Co) h⁻¹ and 5.89 × 10⁵ g mol⁻¹ (Fe) h⁻¹, respectively.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Rhodium(III) and palladium(II) complexes of some P-heterocycles; synthesis and X-ray structures

Deoxygenation of the syn-3-phosphabicyclo[3.1.0]hexane 3-oxides bearing a 3-phenyl or a 3-(4-methylphenyl) substituent (1a,b) by trichlorosilane took place already at mild condition and resulted in the corresponding phosphines (2a,b) with retention of configuration at phosphorus, while in the case of 3-(2-methylphenyl)-3-phosphabicyclo[3.1.0]hexane (2c), the inversion of the phosphorus atom was observed in solution under ambient conditions that was evaluated by quantum chemical calculations. A further phosphine ligand (5) was obtained by the reduction of 4-dichloromethylene-1,4-dihydrophosphinine oxide (4). The phosphine ligands (2 and 5) were used in the preparation of Rh(III) complexes (3 and 6). A Pd(II) complex of type PdCl₂(5)₂ (7) was also prepared. The stereostructures of a series of Rh(III) complexes of 3-aryl-3-phosphabicyclo[3.1.0]hexanes (3b-syn, 3c-syn and 3c-anti) were elucidated by single crystal X-ray analysis confirming the relative position of the dichlorocyclopropane and the P-substituent.     

Synthesis of 5-alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones by denitrocyclisation of N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides. Evidence of a Smiles rearrangement

An efficient method for the synthesis of hitherto unknown alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones 8a-g, 16 and 17 has been established. The method is based on the synthesis of the corresponding N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides 3a-c and 7a-c,e which undergo denitrocyclisation with NaH in DMF in 4.5 or 2 h. When 3a was treated with NaH in DMF for 30 min the product of a Smiles rearrangement, 9, was isolated. Under similar conditions but for 4.5 h 9 was converted into 8a. This confirms the involvement of a Smiles rearrangement during the denitrocyclisation process. Conversion of 3b into isomeric pyrroloquinoxalinones 12 and 13 confirms a process involving two pathways, direct denitrocylisation of 3b and Smiles rearrangement of 3b followed by denitrocylisation, respectively. Furthermore, denitrocylisation of 7d into pyrroloquinoxalinones 16 and 17 suggests that similar cyclisation pathways are followed by N-arylcarboxamides.     

Improved approaches and structures of new ferrocenyl carbene complexes of chromium, tungsten, and molybdenum

Ferrocenyllithium reacts with M(CO)₆ (M = Cr, W, Mo) in THF to give, after alkylation at oxygen, the corresponding carbene complexes 3a-c in good yield. Complexes 3a,b were characterized by X-ray analysis. These complexes react with pentylamine to give the corresponding aminocarbene complexes 7a-c and with allylamine to give, in the case of chromium and tungsten, the corresponding and expected aminonocarbene complexes 8a,b, and for molybdenum, complex 9c in which the double bond is already coordinated to the metal. 8a,b could be converted in 9a,b in excellent yield. The structure of 9a could be confirmed by an X-ray analysis. Alkylations at nitrogen could be carried on complex 9c as well as on complexes 9a,b.     

Methylene-2-ethynylcyclopropanes: synthesis and biological activity of (Z)- and (E)-9-{[2-ethynyl-2-(hydroxymethyl)cyclopropylidene]methyl}adenine and -guanine

Synthesis of methylene-2-ethynylcyclopropane analogues of nucleosides 12a, 12b, 13a, and 13b is described. Ethyl methylenecyclopropane carboxylate 14 was hydroxymethylated to give alcohol 15, which was reduced to diol 16. Selective protection with tert-butyldimethylsilyl group gave derivative 17, which was oxidized to aldehyde 18. Wittig reaction with CBr₄ gave dibromoalkene 19. Elimination of both bromine atoms afforded methylene-2-ethynylcyclopropane 20. Bromoselenenylation using N-bromosuccinimide and diphenyldiselenide gave intermediate 21. Alkylation of adenine and 2-amino-6-chloropurine with 21 provided the Z,E-isomeric mixtures 22a and 22c. Oxidation afforded selenoxides 23a and 23c. Mild thermolysis furnished methylenecyclopropanes Z-24a, E-24a, and 24c. Deprotection and separation of Z,E-isomers gave adenine analogues 12a and 13a, and 2-amino-6-chloropurine intermediates 12c and 13c. Hydrolytic dechlorination of 12c and 13c afforded guanine analogues 12b and 13b. Adenine Z-isomer 12a inhibits replication of Epstein-Barr virus through its cytotoxicity. The E-isomer 13a is a substrate for adenosine deaminase.     

Columnar/smectic metallomesogens derived from heterocyclic benzoxazoles

The synthesis, mesomorphic behavior, and optical properties of two new series of metal complexes 1a,b-M (M=Pd, Cu, Zn) derived from benzoxazoles 2a,b are reported. The crystal and molecular structures of mesogenic 5-decyloxy-2-(6-decyloxybenzooxazol-2-yl)phenol and nonmesogenic bis[5-octyloxy-2-(6-octyloxybenzooxazol-2-yl) phenol]Pd(II) were determined by means of X-ray structural analysis. Two benzoxazoles 2a exhibited monotropic SmA phases, and all benzoxazoles 2b were nonmesogenic. On the other hand, metal complexes 1a-M exhibited distinctly different mesomorphism from complexes 1b-M. Complexes 1a-Pd formed SmC phases; complexes 1a-Cu and 1a-Zn formed crystal phases. In contrast, complexes 1b-Zn exhibited columnar phases, and complexes 1b-Cu and 1b-Pd were nonmesogenic. The difference of the mesomorphism in 1a-M and 1b-M was probably attributed to the geometry and/or the overall molecular shape created by 2a and 2b. The electronic configuration of metal ion might play an important role in forming the mesophases. The fluorescent properties of these compounds were also examined.     

Novel synthesis of 2,4-bis(2-pyridyl)-5-(pyridyl)imidazoles and formation of N-(3-(pyridyl)imidazo[1,5-a]pyridine)picolinamidines: nitrogen-rich ligands

Heating a neat 1:2 mixture of 2-picolylamine and 2-cyanopyridine followed by treatment of the resultant red gummy substance with aqueous KOH resulted in the isolation of 2,4,5-tris(2-pyridyl)imidazole (1a) as the major product and N-(3-(2-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2a) in small amounts. Similarly, by using 3-picolylamine, 2,4,-bis(2-pyridyl)-5-(3-pyridyl)imidazole (1b) and N-(3-(3-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2b) were isolated, and by using 4-picolylamine, 2,4,-bis(2-pyridyl)-5-(4-pyridyl)imidazole (1c) and N-(3-(4-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2c) were isolated. The plausible mechanism of the formation of 1a-c and 2a-c is delineated.     

Chiral pyridine imidazolines from C1-symmetric diamines: Synthesis, arene ruthenium complexes and application as asymmetric catalysis for Diels-Alder reactions

Condensation of mono N-substituted chiral ethylenediamines and pyridine-2-methoxyimidate gives new chiral pyridine imidazolines (1a-c). These react with [RuCl₂(mes)]₂ (mes = 1,3,5-trimethyl benzene) in the presence of NaSbF₆ to give complexes [RuCl(L)(mes)][SbF₆] (5a-c) which after treatment with AgSbF₆ are enantioselective catalysts for the Diels-Alder reaction of methacrolein and cyclopentadiene. The imidazoline catalysts are less selective than the corresponding oxazoline ones. Compounds 1a, 5b and 5c have been characterised by X-ray crystallography.     

Stereocontrolled conversion of some optically active (4S,5R)-dihydroisoxazoles into acyclic 3-acetamido-1,2-diols

Optically active (4S,5R)-dihydroisoxazoles 5a-c (90-91% ee) have been prepared by reaction of the epoxyketones 4a-c with hydroxylamine. Reduction of compounds 5a and 5b using lithium aluminium hydride took place exclusively from the Re face to give (1R,2S,3S)-1,3-disubstituted-3-aminopropane-1,2-diols 6a and 6b. These amino-diols were characterised by N-acetylation and the stereochemical sense of the hydride reduction was confirmed by conversion of amides 7a and 7b into α-amino acid derivatives 10a and 10b.     

Fe(II) and Co(II) pyridinebisimine complexes bearing different substituents on ortho- and para-position of imines: synthesis, characterization and behavior of ethylene polymerization

A series of 2,6-bis(imino)pyridyl iron(II) and cobalt(II) complexes [2,6-(ArNCMe)₂C₅H₃N]MCl₂ (Ar = 2,6-i-Pr₂C₆H₃, M = Fe: 3a, M = Co: 4a; Ar = 2,4,6-i-Pr₃C₆H₂, M = Fe: 3b, M = Co: 4b; Ar = 2,6-i-Pr₂-4-BrC₆H₂, M = Fe: 3c, M = Co: 4c; Ar = 2,4-i-Pr₂-6-BrC₆H₂, M = Fe: 3d, M = Co: 4d) has been synthesized, characterized, and investigated as precatalysts for the polymerization of ethylene in the presence of modified methylaluminoxane (MMAO). The substituents of pyridinebisimine ligands and their positions located significantly influence catalyst activity and polymer property. It is found that the catalytic activities of the iron complexes/MMAO systems are mainly dominated by electronical effect, while those of the cobalt complexes/MMAO systems are primarily controlled by hindering effect.     

Rapid syntheses of (±)-pterocarpans and isoflavones via the gold-catalyzed annulation of aldehydes and alkynes

(±)-Pterocarpan and analogues (4a-c) have been synthesized efficiently via the annulation of salicylaldehydes (1a, 1b and 1c) and o-methoxymethoxylphenylacetylene (2a), followed by a one-pot reduction and acidic cyclization of the ketones (3a-c). In addition, isoflavone derivatives (5a-c) have been synthesized rapidly, in two steps, via the annulation of salicylaldehyde (1a) and arylacetylenes (2b, 2c and 2d), followed by IBX/DMSO oxidation of the isoflavanones (3d, 3e and 3f).     

Syntheses and coordination behaviour of 2-(ortho-phosphinophenyl)-functionalised 1,3-dioxolanes and 1,3-dioxanes towards a [(COD)Rh]-complex fragment - models for immobilised complexes

The syntheses are reported of the ether-phosphine ligands: 2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane (1a), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane (1b), 2-(ortho-diphenylphosphinophenyl)-1,3-dioxane (1c), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane (1d). Their reaction with [(COD)RhCl]₂ (COD: 1,5-cyclooctadiene) results in the formation of the mononuclear complexes: {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2a), {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2b), {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2c), and {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2d). The chloride ligands of compounds 2a and 2b were abstracted with TlPF₆, with accompanied insertion of an acetal oxygen atom of the ligands 1a and 1b into the coordination sphere of the metal centre, producing {(COD)[η²-P,O-2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3a∗PF₆) and {(COD)[η²-P,O-2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3b∗PF₆). In contrast the dioxane analogues of 3, 3c∗BF₄ and 3d∗BF₄, were formed by reacting the ligands 1c, 1d with [Rh(COD)₂]BF₄. The ligands 1 and the complexes 2 serve as model compounds for their via acetalation to a polyvinylalcohol resin bound analogues. The complexes synthesised were employed as pre-catalysts in the hydroformylation reaction of 1-octene.     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Carbonyl complexes of manganese, rhenium and molybdenum with 2-pyridylimino acid ligands

[MBr(CO)₃{κ²(N,O)-pyca}] [M = Mn(1a), Re(1b), pyca = pyridine-2-carboxaldehyde] and [MoCl(η³-C₃H₄Me-2)(CO)₂{κ²(N,O)-pyca}] (1c) react with aminoacid β-alanine to give the corresponding iminopyridine complexes 2a-2c. The same method affords the iminopyridine derivatives from γ-aminobutyric acid (GABA) (3a-3c) and 3-aminobenzoic acid (4a-4c). For complexes 2a-2c, 3a, 3c and 4a, the solid state structures have been determined by X-ray crystallography, revealing interesting differences in their hydrogen-bonding patterns in solid state.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).