Synthesis and characterization of para-nitro substituted 2,6-bis(phenylimino)pyridyl Fe(II) and Co(II) complexes and their ethylene polymerization properties

Four iron(II) and cobalt(II) complexes ligated by 2,6-bis(4-nitro-2,6-R₂-phenylimino)pyridines, LMCl₂ (1: R = Me, M = Fe; 2: R = iPr, M = Fe; 3: R = Me, M = Co; 4: R = iPr, M = Co) have been synthesized and fully characterized, and their catalytic ethylene polymerization properties have been investigated. Among these complexes, the iron(II) pre-catalyst bearing the ortho-isopropyl groups (complex 2) exhibited higher activities and produced higher molecular weight polymers than the other complexes in the presence of methylaluminoxane (MAO). A comparison of 2 with the reference non-nitro-substituted catalyst (2,6-bis(2,6-diisopropylphenylimino)pyridyl)FeCl₂ (FeCat 5) revealed a modest increase of the catalytic activity and longer lifetime upon substitution of the para-positions with nitro groups (activity up to 6.0 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 2 and 4.8 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 5), converting ethylene to highly linear polyethylenes with a unimodal molecular weight distribution around 456.4 kg mol⁻¹. However, the iron(II) pre-catalyst 1 on changing from ortho-isopropyl to methyl groups displayed much lower activities (over an order of magnitude) than 2 under mild conditions. As expected, the cobalt analogues showed relatively low polymerization activities.     

Redox-active antifungal cobalt(II) and copper(II) complexes with sterically hindered o-aminophenol derivatives

Co(II) complexes with 4,6-di(tert-butyl)-2-aminophenol (HL^I) and 2-anilino-4,6-di(tert-butyl)phenol (HL^II) have been synthesized and characterized by means of physico-chemical methods. The compounds HL^I and HL^II coordinate in their singly deprotonated forms and behave as bidentate O,N-coordinated ligands; their low-spin Co(II) complexes are characterized by CoN₂O₂ coordination modes and square planar geometry. Both the free ligands and their Co(II) and Cu(II) complexes (we have produced and characterized the latter before) exhibit a pronounced antifungal activity against Aspergillus niger, Fusarium spp., Mucor spp., Penicillium lividum, Botrytis cinerea, Alternaria alternata, Sclerotinia sclerotiorum, Monilia spp., which in a number of cases is comparable with that of Nystatin and Terbinafine or even higher. The reducing properties of the ligands and their metal(II) complexes, as well as their antifungal activities, were found to decrease in the order: Cu(L^I)₂ > Cu(L^II)₂ ? Co(L^I)₂ > Co(L^II)₂ > HL^I > HL^II.     

Iron(II) and cobalt(II) complexes bearing 8-(1-aryliminoethylidene) quinaldines: Synthesis, characterization and ethylene dimerization behavior

The series of bidentate N^N iron(II) and cobalt(II) complexes containing 8-(1-aryliminoethylidene) quinaldine derived ligands, 8-[2,6-(R¹)₂-4-R²-C₆H₂NC (Me)]-2-Me-C₁₀H₅N, were synthesized and characterized by elemental and spectroscopic techniques. The molecular structures of Co1 (R¹ = Me, R² = H), Co3 (R¹ = ⁱPr, R² = H) and Co4 (R¹ = R² = Me) were confirmed as the distorted tetrahedral by single crystal X-ray diffraction. On treatment with modified methylaluminoxane (MMAO), these complexes exhibited good catalytic activities of up to 5.71 × 10⁵ g mol⁻¹(Fe) h⁻¹ for the ethylene dimerization at 30 °C under 10 atm of ethylene, in which iron pre-catalysts produced butenes with a high selectivity for α-butene. The correlation between metal complexes, catalytic activities and the product formed were investigated under various reaction parameters.     

Simultaneous determination of nickel(II) and cobalt(II) by square wave adsorptive stripping voltammetry on a rotating-disc bismuth-film electrode

This works reports the use of square-wave adsorptive stripping voltammetry (SWAdSV) for the simultaneous determination of Ni(II) and Co(II) on a rotating-disc bismuth-film electrode (BFE). The metal ions in the non-deoxygenated sample were complexed with dimethylglyoxime (DMG) and the complexes were accumulated by adsorption on the surface of the BFE. The stripping step was carried out by using a square-wave potential-time voltammetric excitation signal. Electrochemical cleaning of the bismuth film was employed, enabling the same bismuth film to be used for a series of measurements. The experimental variables (choice of the working electrode substrate, the presence of oxygen, the DMG concentration, the buffer concentration, the preconcentration potential, the accumulation time, the rotation speed and the SW parameters) as well as potential interferences were investigated and the figures of merit of the methods were established. Using the selected conditions, the 3σ limits of detection were 70 ng l⁻¹ for Co(II) and 100 ng l⁻¹ for Ni(II) (for 300 s of preconcentration) and the relative standard deviations were 2.3% for Co(II) and 3.9% for Ni(II) at the 2 μg l⁻¹ level (n = 8). Finally, the method was applied to the determination of nickel and cobalt in real samples with satisfactory results.     

Silicon containing new salicylaldimine Pd(II) and Co(II) metal complexes as efficient catalysts in transformation of carbon dioxide (CO2) to cyclic carbonates

A new series of metal complexes of salicyladimine ligands with Pd(II) and Co(II) have been prepared and characterized by different techniques (elemental analysis, UV-vis, FT-IR, ¹H NMR spectra, magnetic susceptibility measurements). Electronic spectra and magnetic susceptibility measurements reveal square planar geometry for Pd(II) metal complex and tetrahedral geometry for Co(II) metal complex. The synthesized Pd(II) and Co(II) complexes were also tested as catalysts for the formation of cyclic organic carbonates from carbon dioxide and liquid epoxides which served as both reactant and solvent. The results showed that the [M(L₃)₂] (M = Pd or Co) complexes bearing 5-methyl substituent on the aryl ring are more efficient than the other Pd(II) and Co(II) metal complexes for the formation of cyclic organic carbonates from carbon dioxide. These catalysts, [Pd(L₃)₂] and [Co(L₃)₂] complexes and location (p-position of phenoxy) of electron donating methyl substituent in particular, effectively promote the of carbon dioxide activation with liquid epoxides under solvent-free homogeneous conditions. Furthermore, [Pd(L₃)₂] can be reused more than eight times with a minimal loss of its original catalytic activities.     

Synthesis, characterization and catalytic behavior toward ethylene of cobalt(II) and iron(II) complexes bearing 2-(1-aryliminoethylidene)quinolines

A series of 2-(1-aryliminoethylidene)quinolines (L) were synthesized and used as bidentate N^N ligands in coordinating with metal (cobalt and iron) chlorides to form complexes of the type LMCl₂, cobalt(II) (Co1-Co5) and iron(II) (Fe1-Fe5). All organic compounds and metal complexes were fully characterized, and the molecular structures of the representative complexes Co3·DMF and Fe4·DMF were confirmed as distorted bipyramidal geometry at the metal by single-crystal X-ray diffraction. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO) under 10 atm ethylene, all complexes showed high activities in ethylene dimerization with activities of up to 1.82 × 10⁶ g mol⁻¹ (Co) h⁻¹ and 5.89 × 10⁵ g mol⁻¹ (Fe) h⁻¹, respectively.     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c. Part II. Metal(II) complexes of o-diphenol derivatives of thioglycolic acid

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (HL^I) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfinyl]acetic acid (HL^II) were carried out. The investigation of the molecular and electronic structure of Cu(II), Ni(II), Zn(II), Fe(II) and Mn(II) complexes has been performed within the density functional theory (DFT) framework. The computed properties were compared to the experimental ones, and molecular structures of the compounds were proposed based on the array of spectral data and quantum chemical calculations. Antibacterial activity of the Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II), Co(II), Ni(II) and Zn(II) complexes and three standard antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Mn(L^I)₂ > HL^I > Ni(L^I)₂ > Zn(L^I)₂ > Fe(L^I)₂ > Co(H₂O)₂L^I; (2) Cu(L^II)₂ > Сo(L^II)₂ > Ni(L^II)₂ > Mn(H₂O)₂(L^II)₂ > Fe(L^II)₂ > HL^II > Zn(L^II)₂; their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. The complexes Сu(L^I)₂, Mn(L^I)₂ and Co(L^II)₂ with the high reducing ability were found to be characterized by the highest rates of Cyt с reduction. NADPH:cytochrome P450-reductase had no substantial effect on the rate of сytochrome c reduction with HL^I and HL^II ligands.     

Solid phase extraction of zinc(II) using a PVC-based polymer inclusion membrane with di(2-ethylhexyl)phosphoric acid (D2EHPA) as the carrier

A polymer inclusion membrane (PIM) is reported consisting of 45% (m/m) di(2-ethylhexyl)phosphoric acid (D2EHPA) immobilized in poly(vinyl chloride) (PVC) for use as a solid phase absorbent for selectively extracting Zn(II) from aqueous solutions in the presence of Cd(II), Co(II), Cu(II), Ni(II) and Fe(II). Interference from Fe(III) in the sample is eliminated by precipitation with orthophosphate prior to the extraction of Zn(II). Studies using a dual compartment transport cell have shown that the Zn(II) flux (2.58 × 10⁻⁶ mol m⁻² s⁻¹) is comparable to that observed for supported liquid membranes. The stoichiometry of the extracted complex is shown to be ZnR₂·HR, where R is the D2EHPA anion.     

Iron(III) complexes bearing 2-(benzimidazole)-6-(1-aryliminoethyl)pyridines: Synthesis, characterization and their catalytic behaviors towards ethylene oligomerization and polymerization

A series of iron(III) complexes ligated by 2-(benzimidazole)-6-(1-aryliminoethyl)pyridines was synthesized and examined by ¹H NMR, ESI-MS, IR spectroscopic, elemental analysis and X-ray photoelectron spectroscopy (XPS). Activated with methylaluminoxane (MAO), all ferric complexes exhibited good activities (up to 5.38 × 10⁶ g mol⁻¹(Fe) h⁻¹) of ethylene oligomerization and polymerization, and resultant oligomers and polyethylene waxes showed high α-olefin feature, meanwhile the distribution of oligomers mostly resembled Schulz-Flory rules. The various reaction parameters were investigated in detail, and the less bulky and electron-withdrawing substituents of ligands could enhance the catalytic activities of their ferric complexes. The observations explain the cause for unstable activities performed by stored iron(II) complexes.     

Separation of cobalt(II) from nickel(II) by solid-phase extraction into Aliquat 336 chloride immobilized in poly(vinyl chloride)

A solid-phase absorbent obtained by the immobilization of Aliquat 336 chloride in poly(vinyl chloride) is reported to extract preferentially Co(II) from its 7 M hydrochloric acid solutions containing Ni(II). Under the experimental conditions there was no extraction of Ni(II) which allowed the complete separation of these two ions. Co(II) was rapidly and quantitatively back-extracted with deionised water. A mechanism for the extraction of Co(II) is proposed based on the formation of the ion-pair A⁺[HCoCl₄]⁻ where A⁺ is the Aliquat 336 cation. Fe(III) and Cd(II), usually present in Co(II) and Ni(II) samples, were also extracted into the solid-phase absorbent though at a slower rate than Co(II) and they did not interfere with the separation of Co(II) from Ni(II). It was also demonstrated that this approach allowed the complete separation of Ni(II) from the other metal ions mentioned above.     

Iminoimidazole‐based Co(II) and Fe(II) complexes: Syntheses,characterization, and catalytic behaviors for isoprene polymerization

A stereoselectivity switchable polymerization of isoprene has been developed, which is catalyzed by iminoimidazole‐Co(II) and ‐Fe(II) complexes. The influence of substituents ranging from electron donating to the electron withdrawing on the iminoimidazole‐Co(II) and ‐Fe(II) catalysts is investigated for isoprene polymerization. Two sets of iminoimidazole‐Co(II) and ‐Fe(II) complexes have been prepared and fully characterized. X‐ray crystallography analysis reveals that the complexes Co1 and Fe1 adopt distorted tetrahedral geometries. In the presence of AlEt₂Cl as co‐catalyst, all the Co(II) complexes are active and the catalytic activity is highly dependent on the molar ratio of Al/Co. All the Co(II) complexes exhibit higher activities at low Al/Co ratio. Compared with the Co(II) complexes, the Fe(II) complexes are essentially inactive under the identical condition. However, on activation with combination of AlEtCl₂ and [Ph₃C][B(C₆F₅)₄], both Co(II) and Fe(II) complexes display high activities with good conversions of isoprene (up to >99%). Additionally, low molecular weight and high trans‐1,4‐unit (>96%) selectivity are characteristics of the resultant polyisoprene. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 767–775     

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Silica gel-bound amines phase modified with p-dimethylaminobenzaldehyde (p-DMABD) was prepared based on chemical immobilization technique. The product (SG-p-DMABD) was used as an adsorbent for the solid-phase extraction (SPE) Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The uptake behaviors of SG-p-DMABD for extracting these metal ions were studied using batch and column procedures. For the batch method, the optimum pH range for Cr(III) and Ni(II) extraction was ≥ 3, for Cu(II), Pb(II) and Zn(II) extraction it was ≥ 4. For simultaneous enrichment and determination of all the metals on the newly designed adsorbent, the pH value if 4.0 was selected. All the metal ions can be desorbed with 2.0 mL of 0.5 mol L^− 1 of HCl. The results indicate that SG-p-DMABD has rapid adsorption kinetics using the batch method. The adsorption capacity for these metal ions is in the range of 0.40-1.15 mmol g^− 1, with a high enrichment factor of 125. The presence of commonly coexisting ions does not affect the sorption capacities. The detection limits of the method were found to be 1.10, 0.69, 0.99, 1.10 and 6.50 μg L^− 1 for Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 5.0% (n = 8) for all metal ions. The method was applied to the preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from the certified reference material (GBW 08301, river sediment) and water samples with satisfactory results.     

Cobalt(II) and nickel(II) complexes of a cyclam derivative as carriers in iodide-selective electrodes

The ligand 1,4,8-tri(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L¹) containing pendant octyl groups has been synthesised. L¹ is a tetraazamacrocycle derived from the well-known cyclam unit, and the Ni²⁺ and Co²⁺ complexes, [Ni(L¹)]²⁺ and [Co(L¹)]²⁺, have been isolated and characterised. The ability of the nickel(II) and cobalt(II) complexes to act as anion receptors has been studied by using them as ionophores in membrane-based ion-selective electrodes (ISEs). The PVC membrane containing the complex [Ni(L¹)]²⁺ and 2-nitrophenyloctylether as plasticizer shows a Nernstian response against iodide in a concentration range from 1×10⁻¹ to 4×10⁻⁵ M I⁻ with a detection limit of 1.6×10⁻⁵ M I⁻ and a slope of 58.6 mV/pI⁻ at pH 7 (25 °C). In comparison, the electrode containing [Co(L¹)]²⁺ as ionophore gave a sub-Nernstian slope and a low lifetime. A comparison between the iodide-selective electrode containing [Ni(L¹)]²⁺ and other reported iodide-selective electrodes is also reported.     

Coordination to copper(II) strongly enhances the in vitro antimicrobial activity of pyridine-derived N(4)-tolyl thiosemicarbazones

Five copper(II) complexes with N(4)-ortho, N(4)-meta and N(4)-para-tolyl thiosemicarbazones derived from 2-formyl and 2-acetylpyridine were obtained and thoroughly characterized. The crystal structure of N(4)-meta-tolyl-2-acetylpyridine thiosemicarbazone (H2Ac4mT) was determined, as well as that of its copper(II) complex [Cu(2Ac4mT)Cl], which contains an anionic ligand and a chloride in the coordination sphere of the metal. The in vitro antimicrobial activities of all thiosemicarbazones and their copper(II) complexes were tested against Salmonella typhimurium and Candida albicans. Upon coordination a substantial decrease in the minimum inhibitory concentration, from 225 to 1478 μmol L⁻¹ for the thiosemicarbazones to 5–30 μmol L⁻¹ for the complexes was observe against the growth of Salmonella typhimurium and from 0.7–26 to 0.3–7 μmol L⁻¹ against the growth of C. albicans, suggesting that complexation to copper(II) could be an interesting strategy of dose reduction.     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 4,6-di-tert-butyl-3[(2-hydroxyethyl)sulphanyl]-1,2-dihydroxybenzene (HL^I) and 2-amino-4,6-di-tert-butylphenol (HL^II) were carried out. Antibacterial activity of the Co(II), Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II) complexes and three common antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Сo(L^I)₂ > Fe(L^I)₂ ? Mn(L^I)₂ > HL^I; (2) Сu(L^II)₂ > Сo(L^II)₂ > HL^II > Fe(L^II)₂ ? Mn(L^II)₂; and their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. NADPH:cytochrome P450-reductase was found to increase the rate of сytochrome c reduction with HL^I and HL^II ligands, while adrenodoxin in couple with NAD(P)H: adrenodoxin reductase had no substantial effect thereon. It was shown that the reduction of сytochrome c with these compounds cannot be related solely to the facility of their oxidation оr ionization.     

Structure and magnetism of Co(II) complexes with bidentate heterocyclic ligand Hsalbim derived from benzimidazole

Two mononuclear Co(II) complexes based upon 2-(1H-benzimidazol-2-yl)phenol, abbreviation Hsalbim ligand, have been prepared and studied. The structure of Hsalbim and [Co(salbim)₂] have been confirmed by X-ray structure analysis. The second cobalt(II) complex matches the formula [Co(salbim)₂]·(Hsalbim)·MeOH assuming a co-crystallization of one neutral ligand. The electronic spectra are consistent with the tetrahedral pattern. Magnetic susceptibility measurements down to T = 2 K along with the magnetization data until B = 7 T show that the Co(II) complexes are high-spin with a considerable zero-field splitting of the ⁴B₁(D_2d) term: D/hc = 67 and 55 cm⁻¹, respectively.     

A computational study on mixed-ligand N2P3 donor-set iron(II) and ruthenium(II) classical and non-classical hydrides

Iron and ruthenium classical and non-classical hydrides of the type [MH(N–N)P₃]⁺ and [M(η²-H₂)(N–N)P₃]²⁺ {M = Fe, Ru; N–N = 2,2′-bipyridine (bpy), 1,10-phenanthroline (phen); P = phosphites} were reported in 2004 together with an evaluation of the pseudo-aqueous pK_a values of the η²-H₂ complexes. The non-classical hydrides, even if doubly charged, showed a relatively low acidity, their pK_a values ranging between −5.4 and −4.3. Moreover, ruthenium(II) derivatives showed to be more acidic than the corresponding iron(II) complexes. Information about the structural and electronic proprieties of complexes of this type, which allowed to better understand the role of both the metal centres and the ancillary ligands in the acidity of the co-ordinated hydrogen molecule, was obtained on the basis of DFT B3LYP calculations.     

Bismuth-dispersed xerogel-based composite films for trace Pb(II) and Cd(II) voltammetric determination

We report for the first time the synthesis of bismuth-modified (3-mercaptopropyl) trimethoxysilane (MPTMS) and its application for the determination of lead and cadmium by anodic stripping voltammetry. Xerogels made from bismuth-modified MPTMS and mixtures of it with tetraethoxysilane, under basic conditions (NH₃·H₂O), were characterized with scanning electron microscopy, energy dispersive spectroscopy, infrared spectroscopy and electrochemical methods. Bismuth-modified xerogels were mixed with 1.5% (v/v) Nafion in ethanol and applied on glassy carbon electrodes. During the electrolytic reductive deposition step, the bismuth compound on the electrode surface was reduced to metallic bismuth. The target metal cations were simultaneously reduced to the respective metals and were preconcentrated on the electrode surface by forming an alloy with bismuth. Then, an anodic voltammetric scan was applied in which the metals were oxidized and stripped back into the solution; the voltammogram was recorded and the stripping peak heights were related to the concentration of Cd(II) and Pb(II) ions in the sample. Various key parameters were investigated in detail and optimized. The effect of potential interferences was also examined. Under optimum conditions and for preconcentration period of 4 min, the 3σ limit of detection was 1.3 μg L⁻¹ for Pb(II) and 0.37 μg L⁻¹ for Cd(II), while the reproducibility of the method was 4.2% for lead (n = 5, 10.36 μg L⁻¹ Pb(II)) and 3.9% for cadmium (n = 5, 5.62 μg L⁻¹ Cd(II)). Finally, the sensors were applied to the determination of Cd(II) and Pb(II) ions in water samples.     

Synthesis and X-ray crystallographic studies of Ni (II) and Cu (II) complexes of [5-(4-pyridyl)-1,3,4] oxadiazole-2-thione/thiol formed by transformation of N-(pyridine-4-carbonyl)-hydrazine carbodithioate in the presence of ethylenediamine

The reaction of [M(H₂L)₂] [M = Ni(II) Cu(II)] (K⁺H₂L⁻ = N-(pyridine-4-carbonyl)-hydrazine carbodithioate) with excess of ethylenediamine (en) gave mixed ligand complexes [Ni(en)₂(4-pytone)₂] (4-pytone = 5-(4-pyridyl)-1,3,4-oxadiazole-2-thione), and [Cu(en)₂](4-pytol)₂·H₂O (4-pytol = 5-(4-pyridyl)-1,3,4-oxadiazole-2-thiol). The metal complexes have been characterized with the aid of elemental analyses, IR, magnetic susceptibility and single crystal X-ray studies. Complexes (1) and (2) crystallize in monoclinic system, space group P_{1 21}/n₁ and C₂/c, respectively. The ligand after cyclization is present in the deprotonated thiol form in the Cu(II) complex where it is ionically bonded through sulfur. In the Ni(II) complex (1) bonding of the ligand take place through oxadiazole nitrogen and the ligand exists as the thione form.     

Electrochemical,magnetic, catalytic and DNA cleavage studies of binuclear copper(II) complexes derived from pendant substituted tetraaza macrobicyclic compartmental ligands

A series of macrobicyclic unsymmetrical binuclear copper(II) complexes of compartmental ligands were synthesized from the Schiff base condensation of 1,8[N,N′-bis{(3-formyl-2-hydroxy-5-methyl)benzyl}]-1,4,8,11- tetraaza-5,5,7,12,12,14-hexa methylcyclotetradecane with diamines like 1,2-diamino ethane, 1,3-diamino propane, 1,4-diaminobutane, 1,2-diaminobenzene and 1,8-diaminonaphthalene. The complexes were characterized by elemental and spectral analysis. Electrochemical studies of the copper(II) complexes show two irreversible one-electron reduction processes around E¹_pc = −0.70 to −1.10 V and E²_pc = −0.98 to −1.36 V. ESR spectra of the binuclear copper(II) complexes show a broad signal at g = 2.10 and μ_eff values in the range 1.46–1.59 BM, which convey the presence of antiferromagnetic coupling. Cryomagnetic investigation of the binuclear complexes [Cu₂L³(ClO₄)](ClO₄) and [Cu₂L⁴(ClO₄)](ClO₄) show that the observed −2J values are 144 and 216 cm⁻¹, respectively. The observed initial rate (V_in) for the catalytic hydrolysis of p-nitrophenyl phosphate by the binuclear copper(II) complexes were in the range 1.8 × 10⁻⁵ to 2.1 × 10⁻⁵ Ms⁻¹. The initial rate (V_in) for the catalytic oxidation of catechol to o-quinone by the binuclear copper(II) complexes were in the range 2.7 × 10⁻⁵ to 3.5 × 10⁻⁵ Ms⁻¹. The copper(II) complexes have been found to promote cleavage of plasmid pBR 322 DNA from the supercoiled form I to the open circular form II.