Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

New synthesis and thermal studies of palladacycloalkanes and their precursors

A series of new palladacycloalkanes of formula cis-[PdL₂(CH₂)_n] (9. n = 6, L = PPh₃; 10. n = 6, L₂ = dppe; 11. n = 8, L = PPh₃; 12. n = 8, L₂ = dppe) have been prepared by two routes. In the first route, the precursor bis(1-alkenyl) complexes cis-[PdL₂((CH₂)_nCHCH₂)₂] (1. n = 2, L = PPh₃, 2. n = 2, L₂ = dppe, 3. n = 3, L = PPh₃, 4. n = 3, L₂ = dppe) were allowed to react with Grubb’s 2nd generation catalyst to give the palladacycloalkenes, cis-[PdL₂(CH₂)_nCHCH(CH₂)_n] (5. n = 2, L = PPh₃, 6. n = 2, L₂ = dppe, 7. n = 3, L = PPh₃, 8. n = 3, L₂ = dppe), which were then hydrogenated to the palladacycloalkanes, 9-12. In the second route, the di-Grignard reagents BrMg(CH₂)_nMgBr (n = 6, 8) were reacted with the palladium complex [PdCl₂(COD)] followed by immediate ligand displacement to form the respective palladacycloalkanes 10 and 12. The complexes obtained were characterized by a range of spectroscopic and analytical techniques. Thermal decomposition studies were carried out on the palladacycloalkanes 9-12 and the main organic products shown to be 1-alkenes and 2-alkenes.     

Titanium complexes bearing aromatic-substituted β-enaminoketonato ligands: Syntheses, structure and olefin polymerization behavior

A series of titanium complexes [(Ar)NC(CF₃)CHC(R)O]₂TiCl₂ (4b: Ar = -C₆H₄OMe(p), R = Ph; 4c: Ar = -C₆H₄Me(p), R = Ph; 4d: Ar = -C₆H₄Me(o), R = Ph; 4e: Ar = α-Naphthyl, R = Ph; 4f: Ar = -C₆H₅, R = t-Bu; 4g: Ar = -C₆H₄OMe(p); R = t-Bu; 4h: Ar = -C₆H₄Me(p); R = t-Bu; 4i: Ar = -C₆H₄Me(o); R = t-Bu) has been synthesized and characterized. X-ray crystal structures reveal that complexes 4b, 4c and 4h adopt distorted octahedral geometry around the titanium center. With modified methylaluminoxane (MMAO) as a cocatalyst, complexes 4b-c and 4f-i are active catalysts for ethylene polymerization and ethylene/norbornene copolymerization, and produce high molecular weight polyethylenes and ethylene/norbornene alternating copolymers. In addition, the complex 4c/MMAO catalyst system exhibits the characteristics of a quasi-living copolymerization of ethylene and norbornene with narrow molecular weight distribution.     

Cyanoesterification of norbornenes catalyzed by palladium: facile synthetic methodology to introduce cyano and ester functionalities via direct carbon-carbon bond cleavage of cyanoformates

Addition of cyanoformates (NC-COOR) to norbornene at 110 °C in the presence of Pd(PPh₃)₄ (10 mol %) as a catalyst affords with high selectivity the corresponding doubly functionalized polar norbornane derivatives bearing both cyano and ester groups. By using benzonorbornadiene and norbornadienes as the substrates, the reaction can be extended to synthesis of various functionalized norbornene derivatives in moderate to excellent yields. In most cases alkyl groups such as methyl, ethyl, n-propyl, iso-propyl, n-butyl, tert-butyl, and benzyl in the ester functionalities are applicable to the reactions. Oxidative addition of cyanoformates to Pd(0), insertion of norbornenes, and reductive elimination of the corresponding adducts constitute the proposed catalysis pathway.     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Role of titanium oxidation states in polymerization activity of Ziegler-Natta catalyst: A density functional study

The role of titanium oxidation states in olefin polymerization activity for Ziegler-Natta (ZN) catalyst has been investigated using density functional calculations at B3LYP/LANL2DZ as well as extended LANL2DZ basis that includes diffuse and polarization functions for C, H and Cl. Using the simple [TiCl₂CH₃]ⁿ (n = +1, 0, −1) model catalyst systems, we could rationalize some of the well-known experimental facts with varying Ti oxidation states (+4, +3, +2) in the real ZN systems. Firstly, irrespective of Ti oxidation states, the activation barriers (E_act) for ethylene and syn propylene insertion in Ti-CH₃ bond are comparable in accordance with experimental and modeling studies. Secondly, it was observed that Ti(IV) catalyst has the lowest E_act which progressively increase in the order Ti(IV) < Ti(III) < Ti(II) high spin < Ti(II) low spin catalysts in line with experimental and several modeling results. The effect of solvation on olefin insertion barriers are seen more prominent in case of Ti(IV) systems compared to other oxidation states.     

Dinuclear nickel (II) complexes bearing two pyrazolylimine ligands: Synthesis characterization, and catalytic properties for vinyl-type polymerization of norbornene

A series of dinickel (II) complexes of bis-2-(C₃HN₂(R₁)₂-3,5)(C(R₂)N(C₆H₃(CH₃)₂-2,6)Ni₂Br₄ (complex 1: R₁ = CH₃, R₂ = Ph; complex 2: R₁ = CH₃, R₂ = 2,4,6-trimethylphenyl; complex 3: R₁ = R₂ = Ph; complex 4: R₁ = Ph, R₂  = 2,4,6-trimethylphenyl) were synthesized and characterized. The solid-state structures of complexes 1, 2 and 3 have been confirmed by X-ray single-crystal analyses to be in the form of a dinuclear and bromine-bridged structure. However, there is an equilibrium that shifts between the monomer and dimmer in toluene based on the characterization of UV-vis spectrophotometry. Activated by methylaluminoxane (MAO), these complexes are capable of catalyzing the polymerization of norbornene with moderate activity up to 6.64 × 10⁵ gPNBE/(molNi·h). The influences of polymerization parameters such as reaction temperature and Al/Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The influence of the bulkiness of the substituents on polymerization activity was also studied. The obtained polynorbornenes were characterized by means of ¹H NMR, FTIR and TG techniques. The analyses results of polymers’ structures indicated that the norbornene polymerization is vinyl-type polymerization rather than ROMP.     

Vinyl addition polymerization of norbornene catalyzed by β-iminoamine Ni(II) complexes/methylaluminoxane systems

Two nickel(II) complexes (A and B) bearing β-iminoamine ligands, [2-(ArNCH)-C₆H₄-NMe₂] (La, Ar = 2,6-i-Pr₂C₆H₃; Lb, Ar = 2,6-Me₂C₆H₃), were synthesized and characterized by elemental analyses and ¹H NMR. X-ray crystal structure of complex B reveals that the six-membered chelate ring adopts a envelope conformation, with nickel(II) atom deviating from the plane of backbone aromatic ring by 1.164 Å. In the presence of methylaluminoxane (MAO), both complexes showed moderate activities of 10⁵ g mol_Ni⁻¹ h⁻¹ for norbornene polymerization. β-iminoamine Ni(II)/MAO catalysts gave unimodal polymers (M_w, 3.16-8.02 × 10⁵ g/mol) with a relatively narrow MWD (M_w/M_n, 1.59-2.14), indicative of single-site catalyst behavior. The obtained polymers are vinyl-type polynorbornenes (PNBs), which are soluble in common solvents such as toluene, cyclohexane and dichlorobenzene.     

Living radical polymerisation in heterogeneous conditions—suspension polymerisation

Transition metal mediated living radical polymerisation of butyl methacrylate has been demonstrated with a copper(I) halide N-alkyl-2-pyridylmethanimine ligands based catalyst. Optimum conditions were found to be with copper(I) chloride and N-octyl-2-pyridylmethanimine catalyst at 65 °C where conversions of 85% were achieved with polymers of M_n = 8900 g mol⁻¹ (theoretical = 8400 g mol⁻¹) and PDI = 1.23. Both non-ionic and ionic surfactants were employed which were also made by living radical polymerisation. The non-ionic surfactant was a block copolymer of PMMA from a polyethyleneglycol macroinitiator (total M_n = 7600 g mol⁻¹, PDI = 1.20) and the ionic surfactant PDMEAMA-PMMA (total M_n = 8000 g mol⁻¹, PDI = 1.21) with the PDMEAMA block quaternized with MeI (13.8%, 28.4%, 47.7% and 100%). A range of ligands were employed in the suspension polymerisation by varying the alkyl group on the ligand increasing the hydrophobicity (alkyl = propyl (PrMI), pentyl (PMI), octyl (OMI), dodecyl (DMI) and octadecyl (ODMI)). The more hydrophobic ligands were found to be more effective due to lower partitioning into the aqueous phase. Block copolymers of P(EMA)-P(BMA) and P(MMA)-P(BMA) were prepared by first preparing macroinitiators via living radical polymerisation (M_n = 1600 g mol⁻¹ (PDI = 1.23) for P(EMA) and M_n = 1500 g mol⁻¹ (PDI = 1.22) for P(MMA)) and using them for initiation of BMA in suspension polymerisation. Block copolymers had M_n between 12,800 and 13,700 g mol⁻¹ with PDI between 1.33 and 1.54. Block copolymer growth showed excellent linear first order kinetics wrt monomer and demonstrated characteristics expected of a living radical polymerisation. Particle sizes were measured by SEM and DLS with good agreement (1.4-2.8 μm) and SEM showed spherical particles were formed.     

Reactivity ratios in conventional and nickel-mediated radical copolymerization of methyl methacrylate and functionalized methacrylate monomers

Copolymerization of an excess of methyl methacrylate (MMA) relative to 2-hydroxyethyl methacrylate (HEMA) was carried out in toluene at 80 °C according to both conventional and controlled Ni-mediated radical polymerizations. Reactivity ratios were derived from the copolymerization kinetics using the Jaacks method for MMA and integrated conversion equation for HEMA (r_MMA = 0.62 ± 0.04; r_HEMA = 2.03 ± 0.74). Poly(ethylene glycol) α-methyl ether, ω-methacrylate (PEGMA, M_n = 475 g mol⁻¹) was substituted for HEMA in the copolymerization experiments and reactivity ratios were also determined (r_MMA = 0.75 ± 0.07; r_PEGMA ∼ 1.33). Both the functionalized comonomers were consumed more rapidly than MMA indicating the preferred formation of heterogeneous bottle-brush copolymer structures with bristles constituted by the hydrophilic (macro)monomers. Reactivity ratios for nickel-mediated living radical polymerization were comparable with those obtained by conventional free radical copolymerization. Interactions between functional monomers and the catalyst (NiBr₂(PPh₃)₂) were observed by ¹H NMR spectroscopy.     

Stepwise dansyl grafting on the kaolinite interlayer surface

A block copolymer (PS-b-poly(l-Glu)) composed of polystyrene and poly(l-glutamic acid) was used as a stabilizer for dispersion polymerization of styrene. When dispersion polymerization of styrene was conducted at 70 °C in 80% dimethylformamide-water with 0.5 wt% PS-b-poly(l-Glu), spherical polystyrene particles with D_n = 0.72 μm and narrow size distribution were obtained. Whereas AIBN concentration did not have any effects on particle size, molecular weight of the polystyrene particles was strongly dependent on the initiator concentration. As concentration of the PS-b-poly(l-Glu) increased from 0.2 to 1.0 wt%, particle size decreased from D_n = 0.91 to 0.69 μm with keeping surface area occupied by one poly(l-glutamic acid) chain about S = 50 nm². On the other hand, an increase in initial concentration of styrene from 2 to 20 wt% caused an increase in particle size from D_n = 0.48 to 1.36 μm and a decrease in surface area per poly(l-glutamic acid) block from S = 91 to 45 nm². Colloidal stability of the polystyrene particles in aqueous solution was responsive to pH due to the surface-grafted poly(l-glutamic acid). For dispersion polymerization of styrene, the PS-b-poly(l-Glu) functions as both a stabilizer and a surface modifier.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Thermomorphic fluorous phosphines as organocatalysts for Michael addition reactions

The fluorous phosphines P[(CH₂)_mR_fn]₃ (R_fn = (CF₂)_n−1CF₃; m/n = 2/8, 3/8, 3/10) are efficient nucleophilic catalysts of Michael addition reactions. They can be easily recycled based upon their highly temperature-dependent solubilities (thermomorphism), with recovery by simple liquid/solid phase separation. The phosphonium salt formed by reaction of the nucleophilic phosphine with the α,β-unsaturated system appears to be a significant component of the catalyst rest state.     

Insertion of tin(II) bromide into Pt–X (X = Cl,Br) bond of dimethylplatinum(IV) complexes: A novel polymorphic form of [PtBr2(bpy)]

The platinum(II) complex [PtMe₂(bpy)] (bpy = 2,2′-bipyridine) reacted with a large excess of dihaloalkanes X(CH₂)_nX (n = 1, X = Cl; n = 4, X = Br) to form the platinum(IV) complexes [PtMe₂X{(CH₂)_nX}(bpy)] (n = 1, X = Cl, 1a; n = 4, X = Br, 1b). The reaction of complexes 1a and 1b with SnBr₂ resulted in insertion of SnBr₂ into Pt–X (X = Cl, Br) bond to afford the trihalostannyl complexes [PtMe₂(SnBr₂X){(CH₂)_nX}(bpy)] (n = 1, X = Cl, 2a; n = 4, X = Br, 2b). The synthesis of such trihalostannylplatinum(IV) complexes is reported for the first time. The complex 2a was decomposed in CH₂Cl₂ solution and single crystals of [PtBr₂(bpy)] (3a) were obtained. The X-ray structure determination of 3a revealed a new polymorphic form of [PtBr₂(bpy)]. The molecules undergo a remarkable stacking along the b-axis to form a zigzag Pt?Pt?Pt chain containing both short (3.799 Å) and long (5.175 Å) Pt?Pt separations through the crystal. The crystal structure is compared to that of the yellow modification of [PtBr₂(bpy)].     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Are closed clusters expected from the (n + 1) skeletal electron pairs rule in alanes and gallanes? A DFT structural study of AnHn + 2 (A = Al, Ga, and n = 4-6)

It has been suggested recently that the alanes Al_nH_n + 2 can be treated by the polyhedral skeletal electron pair theory (PSEPT) of Wade and Mingos (W-M) as it was successful for their borane congeners such as B_nH_n + 2, well known as the deprotonated B_nH_n²⁻. To do so, the neutral Al_nH_n + 2 have been considered as Al_nH_n²⁻ + 2H⁺. The additional hydrogens donate their electrons to the Al_nH_n polyhedral framework and according to the n + 1 electron pairs rule; these clusters should have closo-polyhedral structures. In this work the homologous gallanes, the structures and stabilities of Ga_nH_n + 2 are studied at high levels of calculational theory and we investigated the applicability of the W-M rule to the alanes and gallanes A_nH_n + 2 (n = 4-6; A = Al, Ga). It will be shown that the presence of bridging hydrogen atoms reduces the compactness of the corresponding polyhedron and so these species do not have the closed structures. The computations were performed at B3LYP/6-311+G(d,p), BPW91/6-311G(d,p) and B3LYP/6-311+G(3df,2p) levels of theory. Our interest in these compounds includes their potential use as hydrogen storage species and future clean sources of energy.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

An effective route for the synthesis of cationic palladium complexes of general formula [(Acac)PdLL]A

A series of palladium complexes of general formula [(Acac)PdL¹L²]⁺A⁻, where L¹, L² = phosphines and A = BF₄, CF₃SO₃, were synthesized. Preliminary studies show that the complexes are active in selective dimerization of styrene and addition polymerization of norbornene.     

The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) complexes bearing 2-acetyl-1,3-indandione ligand,crystal structure of [Ph3P·AgC11H7O3]

Six organophosphine/phosphite stabilized silver(I) complexes of 2-acetyl-1,3-indandione (2-AID) of type L_n·AgC₁₁H₇O₃ (L = PPh₃; n = 1, 2a; n = 2, 2b; L = P(OMe)₃; n = 1, 2c; n = 2, 2d; L = P(OEt)₃; n = 1, 2e; n = 2, 2f) have been prepared by reacting of [AgC₁₁H₇O₃], which could be obtained by reacting of 2-AID with AgNO₃, with triphenylphosphine, trimethylphosphite, or triethylphosphite in 1:1–2 M ratio. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy, and thermal analysis (TG and DSC), respectively. The molecular structure of 2a has been determined by X-ray single crystal analysis in which the silver atom is in a distorted trigonal geometry.