Expanded ring N-heterocyclic carbene complexes of zero valent platinum dvtms (divinyltetramethyldisiloxane): Highly efficient hydrosilylation catalysts

The synthesis and characterisation of a series of new 6- and 7-membered NHC (N-heterocyclic carbene) complexes 7-12 of zero valent platinum dvtms (divinyltetramethyldisiloxane), [Pt(NHC)(dvtms)] are reported. A number of the complexes were investigated as catalyst precursors in the hydrosilylation of a range of unsaturated substrates, including alkynes, alkenes and a ketone with triethylsilane and bis(trimethylsiloxy)methylsilane (MD’M), at low catalyst loading (0.005 mol %); in general, the activity, and the selectivity for 1-functionalised product was found to be high.     

A novel fumed silica-supported nitrogenous platinum complex as a highly efficient catalyst for the hydrosilylation of olefins with triethoxysilane

A novel fumed silica-supported nitrogenous platinum complex was conveniently prepared from cheap γ-aminopropyltriethoxysilane via immobilization on fumed silica in toluene, followed by a reaction with hexachloroplatinic acid. The title complex was characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It was found that the complex is an efficient and stable catalyst for the hydrosilylation of olefins with triethoxysilane. The title platinum complex could be separated by simple filtration and reused several times without any appreciable loss in the catalytic activity.     

Selective hydrosilylation of styrene using an in situ formed platinum(1,3-dimesityl-dihydroimidazol-2-ylidene) catalyst

A highly active and selective in situ formed platinum(N-heterocyclic carbene) catalyst for the hydrosilylation of styrene with triethylsilane is described, which unlike all other known hydrosilylation catalysts, selectively yields hydrosilylation products, but (almost) no dehydrogenative silylation products.     

(Dicyclopentadiene) platinum(II) dichloride: An efficient catalyst for the hydrosilylation reaction between alkenes and triethoxysilane

(Dicyclopentadiene) platinum(II) dichloride was found to be an efficient hydrosilylation catalyst (homogeneous) upon a wide variety of functionalized alkenes and alkenes terminated with chemical moieties (diphenyl amino-, N-carbazol- and N-isoindoline-1,3-dione-). It is noteworthy that the hydrosilylation of aminated alkenes with triethoxysilane exhibited the yield of over 70% and the selectivity (γ-isomer/β-isomer) of more than 3/1. Due to steric hindrance lowering Markovnikov probability, the alkenes with big terminal moieties (diphenyl amino-, N-carbazol- and N-isoindoline-1,3-dione-) presented the high ratio of anti-Markovnikov isomers. The strategy of the hydrosilylation of the protected diamino chelating alkene was developed.     

Synthesis of a novel functional polymer immobilized platinum complex and its application in the catalytic hydrosilylation of 3,3,3-trifluoropropene with triethoxysilane

A novel polymer has been synthesized using 2-vinylpyridine as a functional monomer and allyl polyethylene glycol as a cross-linking agent, and platinum has been immobilized on this synthesized polymer. The resulting immobilized catalyst showed superior catalytic performance for the hydrosilylation of 3,3,3-trifluoropropene with triethoxysilane as compared to homogenous platinum catalyst, polystyrene-immobilized platinum or other hydrosilylation catalysts. The conversion of silane is about 100% and the maximum yield of β-adduct is 92.3% with slightly α-adduct. Furthermore, the catalyst showed sufficient stability that it could be reused three times without noticeable inactivation.     

Synthesis and application of a new selenoplatinum catalyst

The reaction of 4-methyl-5-ethoxycarbonyl-1,2,3-selenadiazole with (PPh₃)₄Pt leads to the formation of a new platinum-containing heterocyclic system. It was found that the selenoplatinum complex is a selective catalyst for the hydrosilylation of terminal alkynes to yield β-(Z)- and β-(E)-silylethylenes.     

Synthesis of 2-methylidene-1-silacyclohexanes by intramolecular hydrosilylation

The preparation of various (hex-5-ynyl)silanes was achieved following two different synthetic approaches from readily available materials such as 4-bromobutene, 6-iodohexyne and chlorosilanes. Different reaction conditions for intramolecular hydrosilylation were tested to prepare the corresponding 2-methylidene-1-silacyclohexanes. Notably, the use of Speier’s catalyst allowed the regioselective formation of the desired products in moderate yields.     

Catalysis of hydrosilylation,part XXII: Polymer-protected immobilized platinum complex catalysts for gas-phase hydrosilylation of acetylene

A platinum catalyst (hexachloroplatinic acid dissolved in ethanol) was immobilized by anchoring via amine and mercapto groups to silica followed by formation of a polymer layer which protected the catalyst against leaching. These catalysts (A and B) as well as precatalysts (S_A-Pt, S_B-Pt) which were not protected by polymer were tested in the gas-phase hydrosilylation reaction of acetylene with trichlorosilane. The catalytic parameters (yield 80%, selectivity 100%) obtained under optimal conditions prove the advantage of catalyst A over 300 h reaction time by the flow method.     

Tri(t-butyl)phosphine-assisted selective hydrosilylation of terminal alkynes

<正>A highly efficient and regio-/stereoselective method of hydrosilylating terminal alkynes was developed using Pt(DVDS)-tri(t-butyl) phosphine catalyst system at room temperature.Trans-products or alpha-products were obtained almost exclusively depending on the alkynes and silanes employed.     

ERETIC implemented in diffusion-ordered NMR as a diffusion reference: a clarification

Additional information as to the objectives of our previous paper entitled 'ERETIC implemented in diffusion-ordered NMR as a diffusion reference' (Magn. Reson. Chem. 2008, 46, S63) is provided. The need for an optimal instrumental stability for the method proposed to be reliably applicable in view of these objectives is emphasized and illustrated.     

Platinum chloride/Xphos-catalyzed regioselective hydrosilylation of functionalized terminal arylalkynes

Totally regioselective hydrosilylation of functionalized terminal arylalkynes was achieved using PtCl₂ associated with the air-stable and bulky Xphos ligand with various silanes. Regardless of the electronic nature of the substituents on the aromatic ring, a single β-(E)-vinylsilane was obtained in excellent yields.     

Hydrosilylation of alkynes catalysed by platinum on titania

The heterogeneous hydrosilylation of alkynes catalysed by platinum on titania is reported. A variety of hydrosilanes react with both terminal and internal alkynes to furnish the corresponding vinyl silanes in high yields and short reaction times as well as in a regio- and stereoselective manner. The catalyst can be easily recovered and reused in several consecutive cycles.     

Regio- and stereoselective hydrosilylation of immobilized terminal alkynes

Regio- and stereoselective hydrosilylation of terminal alkynes on solid support using diisopropyl hydrosilanes yielding β-(E)-vinyl silanes with excellent selectivity is reported. The hydrosilylation is catalyzed by Pt(DVDS)/P(ⁱBuNCH₂CH₂)₃N (DVDS = 1,3-divinyl-1,1,3,3-tetramethyl-disiloxane), in which the bulky proazaphosphatrane ligand plays a key role for the selectivity. The immobilized products are characterized with gel phase¹³C NMR and ¹H high resolution magic angle spinning NMR.     

Mechanistic investigation on hydrogenation and hydrosilylation of ethylene catalyzed by rhenium nitrosyl complex

The mechanistic study for hydrogenation and hydrosilylation of ethylene catalyzed by a rhenium nitrosyl complex is carried out with the aid of density functional theory computations. The hydrogenation of ethylene is found to be available kinetically in which the oxidative addition of H₂ plays a role in decreasing the reaction barrier. For the case of hydrosilylation of ethylene, it is found the oxidative addition of HSiMe₃ cannot occur due to steric reasons, instead, a σ-bond metathesis process for reductive elimination of C₂H₅SiMe₃ is proposed. The major reason for the inaccessibility for the hydrosilylation is resulted from the fact that the oxidative addition of HSiMe₃ cannot give a more stable intermediate.     

New validation of molecular mass measurements by means of 2D DOSY 1H NMR experiments: Application to surfactants

This study proposes a new correlation equation between surfactant diffusion coefficients and molecular mass using 2D DOSY ¹H NMR experiment. Indeed, DOSY is a suitable NMR technique to discriminate the different components in a mixture. Using Inverse Laplace Transform (ILT), all chemical shifts in the direct dimension are dispersed along the second dimension in relation to the diffusion coefficient. This approach does not make any assumption about the number of exponential components. The empiric equation was determined for anionic and non-ionic surfactants dissolved in dimethylsulfoxide (DMSO). The parameters, K = C_r = 5.18 ± 0.70 and a shape factor α = 0.45 ± 0.02 that is related to the molecular family fractal dimension constant δ_F = 2.21 ± 0.11, have been extracted from the data. The equation validity was checked for simple commercial raw material and a simple mixture composed of three surfactants classically used in detergent formulations. This equation, which describes quite satisfactorily the diffusion phenomenon of surfactants, could be used for deformulation purpose to check commercial products in case of quality control or adulteration assessment.     

Stimuli-responsive cyclometalated platinum complex bearing bent molecular geometry for highly efficient solution-processable OLEDs

Smart materials,such as stimuli-responsive luminescence,have attracted much attentions due to their potential application in semiconductor filed.In this context,platinum complexes of(dfppy-DC)Pt(acac) and(dfppy-O-DC)Pt(acac) were prepared and characterized,in which(2-(4',6'-difluorophenyl)pyridinato-N,C2')(2,4-pentanedionato-0,0)Pt(Ⅱ) was used as the planar emission core and 9-(4-(phenylsulfonyl)phenyl)-9 H-carbazole(DC) was regard as the bent pendent.Both platinum complexes showed bright emission in solution and solid state,concomitant with charming external-stimuli-responsive emission under mechanical grinding,organic solvent vapors and pressure.The change emission color spanned from yellow to near-infrared region.Using the platinum complexes as the dopant,solution processable organic light-emitting diodes(OLEDs) were fabricated and a maximum external quantum efficiency of ~18% was achieved,which is the highest value among the reported solution-processable OLEDs based on externalstimuli-responsive luminescence.This research demonstrated that platinum complex can show promising stimuli responsive emission via ingenious molecular design,indicating a novel way for developing the smart materials in semiconductor filed.     

Catalysis of hydrosilylation. XV. A poly(phosphino-organosiloxanyl)silicate-supported rhodium(I) catalyst for gas-phase hydrosilylation of acetylene

Wilkinson's complex [RhCl(PPh₃)₃], anchored to phosphino-organosiloxane macromolecules grafted onto chrysotile asbestos, appeared to be an unusually effective and selective catalyst for the synthesis of vinylsilanes via gas-phase hydrosilylation of acetylene, particularly by methyldichlorosilane in a continuous-flow microreactor as well as in a laboratory reactor. Catalytic and kinetic parameters show an advantage for the catalyst based on the chrysotile-polyorganosiloxane support (catalyst CHR–Rh) over the phosphinated silica (catalyst A).     

Studies on supramolecular gel formation using DOSY NMR

Herein, we present the results obtained from our studies on supramolecular self‐assembly and molecular mobility of low‐molecular‐weight gelators (LMWGs) in organic solvents using pulsed field gradient (PFG) diffusion ordered spectroscopy (DOSY) NMR. A series of concentration‐dependent DOSY NMR experiments were performed on selected LMWGs to determine the critical gelation concentration (CGC) as well as to understand the behaviour of the gelator molecules in the gel state. In addition, variable‐temperature DOSY NMR experiments were performed to determine the gel‐to‐sol transition. The PFG NMR experiments performed as a function of gradient strength were further analyzed using monoexponential DOSY processing, and the results were compared with the automated Bayesian DOSY transformation to obtain 2D plots. Our results provide useful information on the stepwise self‐assembly of small molecules leading to gelation. We believe that the results obtained from these experiments are applicable in determining the CGC and gel melting temperatures of supramolecular gels. Copyright © 2015 John Wiley & Sons, Ltd.     

PtCl2/XPhos: a highly efficient and readily available catalyst for the hydrosilylation of propargylic alcohols

A highly regioselective hydrosilylation of propargylic alcohols has been developed using an in situ prepared PtCl(2)/XPhos catalyst system. The reaction is tolerant of many functional groups and exhibits excellent regio and geometric selectivity.