Illuminating the origins of two-photon absorption properties in fluorescent protein chromophores

We provide here a structural impact on two-photon absorption cross-section (σ^TPA) for 22 distinct fluorescent protein (FP) chromophores. By employing time-dependent density functional theory, we gain insight into two-photon absorption (TPA) process by investigating relationship between σ^TPA and one-photon electronic transition dipole moment and permanent dipole moment change (Δμ) upon transition. Our results reveal that for the S₁ excited state, σ^TPA is proportional to (Δμ)² in agreement with two-state model of TPA process. On the contrary, the TPA spectroscopy of higher excited states (S _n, n > 1) is much more complex. We do not find a main driving force of large σ^TPA that would be common for investigated chromophores. Instead, it seems that channel interference between one-photon transition dipole moment vectors is responsible for enhancement or diminishment of σ^TPA. Our in vacuo results may serve as a benchmark to investigate a role of chromophore-protein interaction in shaping TPA spectra of FPs.     

Two-photon absorption chromophores with a tunable [2,2′]bithiophene core

Sonogashira coupling between 3,5,3′,5′-tetrabromo-[2,2′]bithiophene and various terminal alkynes provides two-photon absorption (TPA) chromophores 1-6, which possess electron donor (D) and/or acceptor (A) alkynyl substituents at 3(3′) and 5(5′) sites of the bithiophene core. The up-converted fluorescence emission excited at 800 nm (Ti:sapphire femtosecond laser, ∼100 fs pulses) was used to determine the two-photon absorption cross-sections (σ) of these compounds. The corresponding TPA cross-section (σ) values ranging from 132 to 1120 GM (10⁻⁵⁰ cm⁴ s photon⁻¹) can be fine-tuned by the substitutents. The quadrupolar-type (A-π-D-π-A) chromophore 5 exhibits the largest σ value (1120 GM) in CH₂Cl₂ upon 800 nm excitation.     

Metal induced enhancement of fluorescence and modulation of two-photon absorption cross-section with a donor-acceptor-acceptor-donor receptor

A metal ion sensing fluorophore L that exhibits a large two-photon absorption cross-section has been synthesized in good yields. The influences of different metal ion inputs, on the one- and two-photon spectroscopic properties of L, have been investigated. The ligand itself does not show any fluorescence although in presence of a metal ion like Zn(II), Cd(II), Mg(II) or Ca(II), a ∼25 time enhancement of fluorescence is observed. The ligand with symmetrical “donor-acceptor-acceptor-donor” characteristics exhibits a large two-photon absorption cross-section measured by femtosecond open-aperture Z-scan technique at 880 nm. However, presence of any of the above metal ions lowers its two-photon absorption cross-section (δ) to different extents at 880 nm. Theoretical calculation carried out in DFT formalism on the ligand and its Zn(II) complex corroborate experimental results.     

Octupolar trisporphyrin conjugates exhibiting strong two-photon absorption

We report octupolar trisporphyrin conjugates, derived from the symmetrical functionalization of a triphenylamine core with three ethynylporphyrin wings, exhibiting largely enhanced two-photon absorption (TPA) compared to the porphyrin monomers. Octupolar trisporphyrin conjugate tris-H₂P was synthesized by the Pd(0)-catalyzed Sonogashira cross-coupling reaction of tris(4-iodophenyl)amine with 5,10,15-tri-(p-tolyl)-20-ethynylporphyrin, and fully characterized by various spectroscopic methods and elemental analysis. The optimized geometry of tris-H₂P obtained by semi-empirical AM1 calculations reveals that tris-H₂P adopts a propeller-shaped structure. Our photophysical studies strongly manifest that the trisporphyrin conjugates are promising octupolar fluorophores with effective π-conjugation over the porphyrin wings through the octupolar core. The trisporphyrin conjugates exhibit much larger TPA cross-section values in comparison with the monomers; the TPA cross-section σ⁽²⁾ value of tris-ZnP (11,800 GM) exceeds that of mono-ZnP (630 GM) by about 20 times.     

Synthesis and crystal structure of manganese(II) complexes with high-denticity ligands derived from azacrowns

The hepta- and octa-dentate ligands N,N′-bis(2-aminobenzyl)-1,10-diaza-15-crown-5 (L¹) and N,N′-bis(2-aminobenzyl)-1,10-diaza-18-crown-6 (L²), respectively, form stable mononuclear Mn(II) complexes. Spectrophotometric titrations performed in acetonitrile solution indicate the formation of mononuclear Mn(II) complexes with both ligands, and no evidence for the formation of binuclear complexes was obtained. The optimal architecture of L¹ allows it to impose the less usual pentagonal bipyramidal geometry on the Mn(II) guest, and the X-ray crystal structure of [Mn(L¹)](ClO₄)₂ shows that the Mn(II) ion is deeply buried in the receptor cavity, coordinated to the seven available donor atoms, with the perchlorate anions remaining outside the metal coordination sphere. In spite of its higher denticity, the receptor L² is unable to form the expected binuclear complexes. The X-ray crystal structure of [Mn(L²)](NO₃)₂ consists of the [Mn(L²)]²⁺ cation and nitrate anions involved in hydrogen-bonding interactions with the aniline groups. In [Mn(L²)]²⁺ the metal ion is also placed in the crown hole, but as a result of the large size of the macrocyclic cavity only six of the eight available donor atoms of the receptor form part of the Mn(II) coordination sphere, with the Mn(II) ion found in a distorted octahedral coordination environment.     

Theoretical study of the two-photon absorption properties of octupolar complexes with Cu(I), Zn(II) and Al(III) as centers and bis-cinnamaldimine as ligands

The equilibrium geometries, electronic structures, one- and two-photon absorption (TPA) properties of a series of octupolar complexes with the Cu(I), Zn(II) and Al(III) as coordinate centers and the bis-cinnamaldimine as ligands have been studied using the B3LYP/6-31G(d) and ZINDO-SOS methods. Compared with the dipolar metal complexes, all the octupolar metal complexes (including tetrahedral and octahedral complexes) have relatively large TPA cross-sections, indicating that building octupolar metal complex is an effective route to design of promising TPA material. Lewis acidity of metal center and molecular symmetry are two important factors for enhancement of TPA cross-section of metal complex. Due to the stronger Lewis acidity of Zn(II) than Cu(I) as well as Al(III) than Zn(II), the tetrahedral Zn(II) complex exhibits a TPA cross-section larger than that of the tetrahedral Cu(I) complex, the maximum TPA position of the octahedral Al(III) complex is red-shifted relative to the octahedral Zn(II) complex, and at the same time, the octahedral Al(III) complex has a large TPA cross-section. Compared with the tetrahedral complexes, the TPA cross-sections of the octahedral complexes are enhanced due to the increased number of ligands.     

A theoretical study on magnesium ion–selective two-photon fluorescent probe based on benzo [h] chromene derivatives

The geometrical structure, electronic structure, and one-photon absorption (OPA) properties of a series of magnesium ion (Mg²⁺)-selective fluorescent probes based on benzo [h] chromene derivatives have been theoretically studied by using density functional theory (DFT) method and Zerner’s intermediate neglect of differential overlap (ZINDO) methods. Their two-photon absorption (TPA) properties are also calculated by using the method of ZINDO/sum-over-states. Results show that all studied probe molecules exhibit large TPA cross-section (δ_max) in response to Mg²⁺ in 700- to 1,200-nm range. Furthermore, the δ_max can be greatly enhanced by introducing acceptor groups to the lateral side of benzo [h] chromene. And that probes with stronger acceptor group show larger δ_max and result in 70-fold enhancing when coordinate with Mg²⁺. Significantly, probe molecules with good cell permeability were also studied by replacing the hydrogen group with acetoxymethyl ester, but δ_max changed slightly. These results shed light into the design strategy of efficient TP fluorescent probes with large δ_max and good cell permeability for Mg²⁺ sensing in living systems.     

All-valence-electron Cl calculations on the electronic spectrum of diborane

All-valence-electron Cl calculations have been carried out for diborane B₂H₆ and its positive ion employing a rather large double-zeta AO basis including polarization functions in order to study the electronic spectrum of this system. Transitions from four different valence MOs are found to lead to low-lying electronic transitions of both Rydberg and valence type in each case. Ad mixture of valence character in the otherwise Rydberg-like (nx, 3s), (ny, 3s) and (σ, 3pz) transitions calculated to lie between 11.0 and 11.6 eV is indicated as being primarily responsible for the highly intense shoulder found in this region of the B₂H₆ spectrum. The other strong feature with essentially continuous absorption peaking at 9.3 eV is suggested to result from superposition of several Rydberg-type transitions in the generally broad absorption pattern expected for the ¹(π,π^*) species at significantly higher vertical excitation energy. Quite good agreement is obtained between calculation and experiment for all of the six lowest IPs of diborane and also for the locations of the ¹(n, π^*) and ¹(σ, π^*) transitions previously assigned to the two weak features observed at 6.8 and 8.3 eV in this spectrum.     

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

A novel chelating resin (poly-Cd(II)-DAAB-VP) was prepared by metal ion imprinted polymer (MIIP) technique. The resin was obtained by one pot reaction of Cd(II)-diazoaminobenzene-vinylpyridine with cross-linker ethyleneglycoldimethacrylate (EGDMA). Comparing with non-imprinted resin, the poly-Cd(II)-DAAB-VP has higher adsorption capacity and selectivity for Cd(II). The distribution ratio (D) values for the Cd(II)-imprinted resin show increase for Cd(II) with respect to both D values of Zn(II), Cu(II), Hg(II) and non-imprinted resin. The relatively selective factor (α_r) values of Cd(II)/Cu(II), Cd(II)/Zn(II) and Cd(II)/Hg(II), are 51.2, 45.6, and 85.4, which are greater than 1. poly-Cd(II)-DAAB-VP can be used at least 20 times without considerable loss of adsorption capacity. Based on poly-Cd(II)-DAAB-VP packed columns, a highly selective solid-phase extraction (SPE) and preconcentration method for Cd(II) from aqueous solution was developed. The MIIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.093 to 30 μg l⁻¹. The detection limit and quantification limit were 0.093 and 0.21 μg l⁻¹ (3σ) for flame atomic absorption spectrometry (FAAS). The relative standard deviation of the eleven replicate determinations was 3.7% for the determination of 10 μg of Cd(II) in 100 ml water sample. Determination of Cd(II) in certified river sediment sample (GBW 08301) demonstrated that the interfering matrix had been almost removed during preconcentration. The column was good enough for Cd(II) determination in matrixes containing components with similar chemical property such as Cu(II), Zn(II) and Hg(II).     

Excited-state absorption of mono-, di- and tri-nuclear cyclometalated platinum 4,6-diphenyl-2,2′-bipyridyl complexes

The ground-state absorption cross-sections (σ_g), triplet excited-state absorption cross-section (σ_T) at 532 nm, singlet excited-state absorption cross-sections (σ_s) at various visible wavelengths, singlet and triplet excited-state lifetimes, and triplet quantum yields of three cyclometalated platinum(II) 4,6-diphenyl-2,2′-bipyridyl complexes, are reported. The presence of metal-metal and π-π interactions in the dinuclear and trinuclear complexes results in a significant increase in their respective σ_g’s in the visible spectral region. As a result, the ratio of σ_s/σ_g and σ_T/σ_g at each wavelength is significantly greater for the mononuclear complex than for the dinuclear and the trinuclear complexes.     

Bimetallic Ruthenium Nitrosyl Complexes with Enhanced Two-Photon Absorption Properties for Nitric Oxide Delivery

One monometallic and three bimetallic ruthenium nitrosyl (RuNO) complexes are presented and fully characterized in reference to a parent monometallic complex of formula [FTRu(bpy)(NO)]³⁺, where FT is a fluorenyl-substituted terpyridine ligand, and bpy the 2,2’-bipyridine. These new complexes are built with the new ligands FFT, TFT, TFFT, and TF-CC-TF (where an alkyne C≡C group is inserted between two fluorenes). The crystal structures of the bis-RuNO₂ and bis-RuNO complexes built from the TFT ligand are presented. The evolution of the spectroscopic features (intensities and energies) along the series, at one-photon absorption (OPA) correlates well with the TD-DFT computations. A spectacular effect is observed at two-photon absorption (TPA) with a large enhancement of the molecular cross-section (σ_TPA), in the bimetallic species. In the best case, σ_TPA is equal to 1523±98 GM at 700 nm, in the therapeutic window of transparency of biological tissues. All compounds are capable of releasing NO⋅ under irradiation, which leads to promising applications in TPA-based drug delivery.     

Anderson-type heteropolyanions of molybdenum(VI) and tungsten(VI)

The previously reported preparation of some Anderson-type molybdopolyanions containing divalent metal ions (Zn, Cu, Co or Mn) as a heteroatom has been reinvestigated. The molybdopolyanions of Zn(II) and Cu(II) were confirmed, although the Cu(II) polyanion was not stable and could not be recrystallized. On the other hand, the polyanions of Co(II) and Mn(II) could not be reproduced. Another type of heteropoly compound, [X(H₂O)_6-x(Mo₇O₂₄)]⁴⁻ [X = Cu(II), Co(II) or Mn(II)], was isolated as solids, which are not stable thermally. The mixed-type Anderson polyanions, [Ni(II)Mo_6-xW_x,O₂₄H₆]⁴⁻, which have been questioned as mixtures of species with different x values, were also reinvestigated using IR, UV absorption and MCD spectra. They are single species, but not mixtures, although some positional isomers may be present for the compounds where x = 2-4. The possibility of oxidation of the heteroatom with the Anderson structure maintained was examined. The oxidation of [Ni(II)Mo₆O₂₄H₆]⁴⁻ by the S₂O²⁻₈ ion in aqueous solution gave the Waugh-type [Ni(IV)Mo₉O₃₂]⁶⁻ polyanion, whereas the oxidation of [Ni(II)W₆O₂₄H₆]⁴⁻ gave no heteropoly compound.     

Synthesis,luminescence, and cyclic voltammetric studies of novel binuclear ruthenium(II) complexes prepared from β-diketonate derivatives

Two bis-(β-diketonate) ligands [H₂L¹ = 3,6-bis-(4,4,4-trifluorobutane-1,3-dione)-9-butyl-carbazole and H₂L² = 3,6-bis-(4,4,4-trifluorobutane-1,3-dione)-9-hexyl-carbazole] were synthesized, and their corresponding dinuclear ruthenium(II) complexes [Ru₂(bpy)₄(L¹)](PF₆)₂ (1) and [Ru₂(bpy)₄(L²)](PF₆)₂ (2) (bpy = 2,2′-bipyridine)] were prepared by the reaction of Ru(bpy)₂Cl₂ · 2H₂O with H₂L¹ and H₂L² in ethanol, respectively. The structure of the ligand H₂L² was determined by single-crystal X-ray diffraction. The spectral properties of the ligands and their complexes have been studied. The absorption spectra of the complexes exhibit intense ligand-centered bands in the UV region and metal-to-ligand charge-transfer bands in the visible region. The two-photon absorption (TPA) coefficient β and TPA cross-section σ were determined by the Z-scan technique, which revealed that the two complexes exhibit strong TPA due to electronic extensive delocalization. The complexes undergo a reversible or quasi-reversible one-electron metal-centered redox process at E _1/2 = +0.93 V and E _1/2 = +0.92 V, respectively.     

Synthesis,structural, spectroscopic,biological and catalytic activity of Co(II), Ni(II) and Cu(II) complexes of benzilic hydrazide (BH)

Co(II), Ni(II) and Cu(II) chloro complexes of benzilic hydrazide (BH) have been synthesized. Also, reaction of the ligand (BH) with several copper(II) salts, including NO₃ ^?, AcO^?, and SO₄ ^? afforded metal complexes of the general formula [CuLX(H₂O) _n ]·nH₂O, where X is the anion and n = 0, 1 or 2. The newly synthesized complexes were characterized by elemental analysis, mass spectra, molar conductance, UV–vis, IR spectra, magnetic moment, and thermal analysis (TG/DTG). The physico-chemical studies support that the ligand acts as monobasic bidentate towards metal ion through the carbonyl and hydroxyl oxygen atoms. The spectral data revealed that the geometrical structure of the complexes is square planar for Cu (II) complexes and tetrahedral for Co(II) and Ni(II) complexes. Structural parameters of the ligand and its complexes have been calculated. The ligand and its metal complexes are screened for their antimicrobial activity. The catalytic activities of the metal chelates have been studied towards the oxidative decolorization of AB25, IC and AB92 dyes using H₂O₂. The catalytic activity is strongly dependent on the type of the metal ion and the anion of Cu(II) complexes.     

Triphenylamine-based highly active two-photon absorbing chromophores with push-pull systems

Two triphenylamine-based star-type push-pull chromophores (T1, T2) were designed and synthesized. Triphenylamine serves as the central core and acts as an electron-donating group surrounded by electron-withdrawing pentafluorobenzene or N,N-dimethyl substituted tetrafluorobenzene, which are connected by ethylene bridges. Single-crystal X-ray diffraction confirmed the structures and molecular arrangement of two chromophores. The systematic photophysical research of T1 and T2 absorption characteristics was carried out to gain a better understanding of how structure-property relationships affect the observed nonlinear optical absorption phenomenon. Complementary calculations based on density functional theory (DFT) further confirmed the experimental results. Both chromophores exhibited excellent two-photon absorption (TPA) properties in CH₂Cl₂. Notably, T2 has more remarkable nonlinear optical absorption effects with the TPA cross-section up to 4.24 × 10⁷ GM. By adjusting the electronic structures of the chromophores through introducing pentafluorobenzene or N,N-dimethyl as functional groups with different electron-donating or withdrawing behaviors, the TPA performance of the small organic molecule could be greatly enhanced. These molecular structures with push-pull systems were excellent candidates for different two-photon applications.     

Selective solid-phase extraction of trace cadmium(II) with an ionic imprinted polymer prepared from a dual-ligand monomer

A novel dual-ligand reagent (2Z)-N,N′-bis(2-aminoethylic)but-2-enediamide, was synthesized and applied to prepare metal ion-imprinted polymers (IIPs) materials by ionic imprinted technique for selective solid-phase extraction (SPE) of trace Cd(II) from aqueous solution. In the first step, Cd(II) formed coordination linkage with the two ethylenediamine groups of the synthetic monomer. Then the complex was copolymerized with pentaerythritol triacrylate (crosslinker) in the presence of 2,2′-azobisisobutyronitrile as initiator. Subsequently, the imprinted Cd(II) was completely removed by leaching the dried and powdered materials particles with 0.5 M HCl. The obtained IIPs particles exhibited excellent selectivity for target ion. The distribution ratio (D) values of Cd(II)-IIPs for Cd(II) were greatly larger than that for Cu(II), Zn(II) and Hg(II). The relative selective factor (α_r) values of Cd(II)/Cu(II), Cd(II)/Zn(II) and Cd(II)/Hg(II) were 25.5, 35.3 and 62.1. The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Cd(II) was 32.56 and 6.30 mg g⁻¹, respectively. Moreover, the times of adsorption equilibration and complete desorption were remarkably short. The prepared Cd(II)-IIPs were shown to be promising for solid-phase extraction coupled with inductively coupled plasma atomic emission spectrometry (ICP-AES) for the determination of trace Cd(II) in real samples. The precision (R.S.D.) and detection limit (3σ) of the method were 2.4% and 0.14 μg L⁻¹, respectively. The column packed with Cd(II)-IIPs was good enough for Cd(II) separation in matrixes containing components with similar chemical behaviour such as Cu(II), Zn(II) and Hg(II).     

Gas-phase reactions of doubly charged alkaline earth and transition metal complexes of acetonitrile, pyridine, and methanol generated by electrospray ionization

Formation and low energy collision-induced dissociation (CID) of doubly charged metal(II) complexes ([metal(II)+L _n ]²⁺, metal(II)=Co(II), Mn(II), Ca(II), Sr(II) and L = acetonitrile, pyridine, and methanol) were investigated. Complexes of [metal(II)+L _n ]²⁺ where n≤7 were obtained using electrospray ionization. Experimental parameters controlling the dissociation pathways for [Co(II)+(CH₃CN)₂]²⁺ were studied and a strong dependence of these processes on the collision energy was found. However, the dissociation pathways appear to be independent of the cone potential, indicating low internal energy of the precursor ions. In order to probe how these processes are related to intrinsic parameters of the ligand such as ionization potential and metal ion coordination, low energy CID spectra of [metal(II)+L _n ]²⁺ for ligands such as acetonitrile, pyridine, and methanol were compared. For L = pyridine, all metals including the alkaline earth metals Ca and Sr were reduced to the bare [metal(I)]⁺ species. Hydride transfer was detected upon low energy CID of [metal(II)+L _n ]²⁺ for metal(II)=Co(II) and Mn(II) and L = methanol, and corroborated by signals for [metal(II)+H^?]⁺ and [metal(II)+H^?+CH₃OH]⁺, as well as by the complementary ion [CH₃O]⁺.     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.     

Enhanced metal extractive behavior using dual mechanism bifunctional polymer: an effective metal chelatogen

A new class of chelating polymers using Amberlite XAD-16 (AXAD-16) modified with (N-(3,4-dihydroxy)benzyl)-4-amino,3-hydroxynapthalene-1-sulphonic acid has been developed based on dual mechanism bifunctional polymers, for the extraction of transition and post-transition metal ions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 71, 85, 182, 130 and 46 mg g⁻¹ for Ni(II), Cd(II), Pb(II), Cu(II) and Co(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels showed a time duration of <5 min except for Co(II) which required 20 min, for complete metal ion saturation. Desorption of metal ions were effective with 15 ml of 2 M HCl/HNO₃ prior to detection using flame atomic absorption spectrophotometer. The chelating polymer was highly ion-selective in nature even in the presence of large concentrations of alkali and alkaline earth metal ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating matrix was tested on its utility with synthetic and real samples like river/sea/tap/well water samples and also with multivitamin/mineral tablets, showed R.S.D. values of <2.5% reflecting on the accuracy and reproducibility of data using the newly developed resin matrix.     

Synthesis and characterization of some new Co(II) and Cd(II) macroacyclic Schiff-base complexes containing piperazine moiety

Three Cd(II) or Co(II) macroacyclic Schiff-base complexes [CoL¹Br]ClO₄ (1), [CdL²Cl]ClO₄ (2) and [CdL³(NO₃)]ClO₄ (3) were prepared by template condensation of 2-pyridinecarboxaldehyde and three different amines containing piperazine moiety, N,N′-bis(2-aminoethyl)piperazine, N,N′(2-aminoethyl)(3-aminopropyl)piperazine and N,N′-bis(3-aminopropyl)piperazine, in the presence of Co(II) or Cd(II) metal ions, respectively. All complexes have been studied with IR, FAB mass and microanalysis and for complex (3) by ¹H and ¹³C NMR spectra. One of these complexes, [CdL³(NO₃)]ClO₄ (3) has been characterized through X-ray crystallography. In complex (3), the Cd(II) ion is coordinated by the six nitrogen donor atoms from the ligand and by one oxygen atom from a monodentate nitrate ion in a N₆O environment.